ATMEGA128L-8ANR - 8MHz 128KB Flash AVR MCU | Microchip 64-TQFP
Артикул: ATMEGA128L-8ANR ✗ Снят с производства| Кол-во | Цена за ед. | Итого |
|---|---|---|
| 1 | $18.5 | $18,50 |
| 10 | $16.85 | $168,50 |
| 100 | $14.95 | $1.495,00 |
| 500 | $13.2 | $6.600,00 |
| 1.000 | $11.85 | $11.850,00 |
ATMEGA128L-8ANR Обзор
An AVR microcontroller is an 8-bit RISC (Reduced Instruction Set Computer) processor based on a Harvard architecture with separate program and data buses, allowing instruction fetch and data access to occur in the same clock cycle. The ATmega128L belongs to the megaAVR family, which sits in the broader taxonomy of microcontroller -> embedded controller -> semiconductor IC. It is designed for embedded applications requiring deterministic real-time response, low power consumption, and integrated analog/digital peripherals.
Key features include 53 general-purpose I/O lines, 32 general-purpose working registers, four flexible Timer/Counters with compare modes and PWM, two USARTs, a byte-oriented Two-wire Serial Interface (TWI/I2C-compatible), an SPI serial interface, an 8-channel 10-bit successive-approximation ADC, a JTAG interface for on-chip debugging, and a watchdog timer with separate on-chip oscillator. The device supports supply voltages from 2.7 V to 5.5 V (the 'L' variant optimizes low-voltage operation versus the standard ATmega128).
The architecture uses an advanced RISC core with 133 powerful instructions, most executed in a single clock cycle. The integrated JTAG (IEEE 1149.1-compliant) interface supports boundary-scan and on-chip debug, simplifying in-system programming and field updates. The peripheral feature set is balanced for industrial control, human-interface designs, and battery-powered instrumentation.
Typical applications include industrial automation and control, low-power IoT edge nodes, embedded HMI panels, sensor data acquisition systems, motor control firmware platforms, and battery-powered portable instrumentation. The wide 2.7 V to 5.5 V supply range also makes it suitable for legacy 5 V systems as well as 3.3 V designs with adequate decoupling.
When designing with this part, ensure the JTAG pins are correctly terminated if the interface is unused, and respect the maximum clock frequency versus supply voltage tradeoff: at 2.7 V the device is rated up to 8 MHz, while higher frequencies require an external clock or crystal with proper load capacitor selection. Programming via SPI is also supported for bootloader-based field upgrades.
This page synthesizes distributor pricing, drop-in same-package alternatives, and practical design considerations not found on a single datasheet page.
Аналоги без доработки для ATMEGA128L-8ANR — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.
Варианты в этой серии
Модели той же серии, совместимые без доработки с ATMEGA128L-8ANR (тот же форм-фактор и посадочное место) — отличается по Package, Communication Interfaces, Operating Temperature, Timers/Counters, RoHS Status.
Инструмент быстрого сравнения — выберите альтернативные компоненты для сравнения бок о бок:
ATMEGA128L-8AU
✅ Прямая замена✓ В наличии
$23.49 / шт.
Открыть даташит →ATMEGA128L-8AN
✅ Прямая замена✓ В наличии
$11.85 / шт.
Открыть даташит →ATMEGA128L-8MN
✅ Прямая замена✓ В наличии
$7.68 / шт.
Открыть даташит →ATMEGA128L-8MNR
✅ Прямая замена✓ В наличии
$4.55 / шт.
Открыть даташит →ATMEGA128-16AN
✅ Прямая замена✓ В наличии
$7.44 / шт.
Открыть даташит →ATMEGA128-16AI
✅ Прямая замена✓ В наличии
$5.9 / шт.
Открыть даташит →ATMEGA128L-8ANR Максимальные параметры и электрические характеристики
| Core Architecture | 8-bit AVR RISC |
| Program Memory (Flash) | 128 KB (64K x 16) |
| SRAM | 4 KB |
| EEPROM | 4 KB |
| Максимальная тактовая частота | 8 MHz |
| Supply Voltage Range | 2.7 V to 5.5 V |
| GPIO Pins | 53 |
| ADC | 8-channel, 10-bit |
| Timers/Counters | 4 flexible Timer/Counters with PWM |
| Communication Interfaces | 2x USART, SPI, TWI (I2C-compatible) |
| JTAG Interface | Yes (IEEE 1149.1-compliant, on-chip debug) |
| Корпус | 64-pin TQFP (14x14 mm), 1 mm height, Tape & Reel |
| Тип монтажа | Surface Mount |
| Рабочая температура | Industrial, -40C to +85C (R suffix indicates T&R packaging) |
| Watchdog Timer | Yes, with separate on-chip oscillator |
| Instruction Set | 133 powerful instructions, mostly single-cycle |
| Throughput | Up to 1 MIPS per MHz |
| Статус RoHS | Compliant (Green, Pb-free) |
Конфигурация выводов ATMEGA128L-8ANR
| Контакт 1 | VCC — Digital supply voltage (2.7 V to 5.5 V) |
| Контакт 2 | PE0 (RXD0/PDI) — Port E bit 0 / USART0 RXD / Programming Data In |
| Контакт 3 | PE1 (TXD0/PDO) — Port E bit 1 / USART0 TXD / Programming Data Out |
| Контакт 4 | PE2 (AIN0/XCK0) — Port E bit 2 / Analog comparator input 0 / USART0 clock |
| Контакт 5 | PE3 (AIN1/OC3A) — Port E bit 3 / Analog comparator input 1 / Timer3 Compare A |
| Контакт 6 | PE4 (OC3B/INT4) — Port E bit 4 / Timer3 Compare B / External interrupt 4 |
| Контакт 7 | PE5 (OC3C/INT5) — Port E bit 5 / Timer3 Compare C / External interrupt 5 |
| Контакт 8 | PE6 (T3/INT6) — Port E bit 6 / Timer3 clock input / External interrupt 6 |
| Контакт 9 | PE7 (ICP3/INT7) — Port E bit 7 / Timer3 input capture / External interrupt 7 |
| Контакт 10 | VCC — Digital supply voltage |
| Контакт 11 | GND — Ground |
| Контакт 12 | PA0 (AD0) — Port A bit 0 / External memory address/data bit 0 |
| Контакт 13 | PA1 (AD1) — Port A bit 1 / External memory address/data bit 1 |
| Контакт 14 | PA2 (AD2) — Port A bit 2 / External memory address/data bit 2 |
| Контакт 15 | PA3 (AD3) — Port A bit 3 / External memory address/data bit 3 |
| Контакт 16 | PA4 (AD4) — Port A bit 4 / External memory address/data bit 4 |
| Контакт 17 | PA5 (AD5) — Port A bit 5 / External memory address/data bit 5 |
| Контакт 18 | PA6 (AD6) — Port A bit 6 / External memory address/data bit 6 |
| Контакт 19 | PA7 (AD7) — Port A bit 7 / External memory address/data bit 7 |
| Контакт 20 | RESET — Reset input, active low |
| Контакт 21 | VCC — Digital supply voltage |
| Контакт 22 | GND — Ground |
| Контакт 23 | XTAL2 — Crystal oscillator output |
| Контакт 24 | XTAL1 — Crystal oscillator input / external clock input |
| Контакт 25 | PD0 (SCL/INT0) — Port D bit 0 / TWI clock / External interrupt 0 |
| Контакт 26 | PD1 (SDA/INT1) — Port D bit 1 / TWI data / External interrupt 1 |
| Контакт 27 | PD2 (RXD1/INT2) — Port D bit 2 / USART1 RXD / External interrupt 2 |
| Контакт 28 | PD3 (TXD1/INT3) — Port D bit 3 / USART1 TXD / External interrupt 3 |
| Контакт 29 | PD4 (ICP1) — Port D bit 4 / Timer1 input capture |
| Контакт 30 | VCC — Digital supply voltage |
| Контакт 31 | GND — Ground |
| Контакт 32 | GND — Ground |
| Контакт 33 | PC0 (A8) — Port C bit 0 / External memory address bit 8 |
| Контакт 34 | PC1 (A9) — Port C bit 1 / External memory address bit 9 |
| Контакт 35 | PC2 (A10) — Port C bit 2 / External memory address bit 10 |
| Контакт 36 | PC3 (A11) — Port C bit 3 / External memory address bit 11 |
| Контакт 37 | PC4 (A12) — Port C bit 4 / External memory address bit 12 |
| Контакт 38 | PC5 (A13) — Port C bit 5 / External memory address bit 13 |
| Контакт 39 | PC6 (A14) — Port C bit 6 / External memory address bit 14 |
| Контакт 40 | PC7 (A15) — Port C bit 7 / External memory address bit 15 |
| Контакт 41 | PG0 (WR) — Port G bit 0 / External memory write strobe |
| Контакт 42 | PG1 (RD) — Port G bit 1 / External memory read strobe |
| Контакт 43 | PG2 (ALE) — Port G bit 2 / Address latch enable |
| Контакт 44 | PB0 (SS) — Port B bit 0 / SPI slave select |
| Контакт 45 | PB1 (SCK) — Port B bit 1 / SPI serial clock |
| Контакт 46 | PB2 (MOSI) — Port B bit 2 / SPI master out slave in |
| Контакт 47 | PB3 (MISO) — Port B bit 3 / SPI master in slave out |
| Контакт 48 | PB4 (OC0) — Port B bit 4 / Timer0 compare output |
| Контакт 49 | PB5 (OC1A) — Port B bit 5 / Timer1 compare A output |
| Контакт 50 | PB6 (OC1B) — Port B bit 6 / Timer1 compare B output |
| Контакт 51 | PB7 (OC2/OC1C) — Port B bit 7 / Timer2 compare or Timer1 compare C |
| Контакт 52 | PF0 (ADC0) — Port F bit 0 / ADC channel 0 |
| Контакт 53 | PF1 (ADC1) — Port F bit 1 / ADC channel 1 |
| Контакт 54 | PF2 (ADC2) — Port F bit 2 / ADC channel 2 |
| Контакт 55 | PF3 (ADC3) — Port F bit 3 / ADC channel 3 |
| Контакт 56 | PF4 (ADC4/TCK) — Port F bit 4 / ADC channel 4 / JTAG TCK |
| Контакт 57 | PF5 (ADC5/TMS) — Port F bit 5 / ADC channel 5 / JTAG TMS |
| Контакт 58 | PF6 (ADC6/TDO) — Port F bit 6 / ADC channel 6 / JTAG TDO |
| Контакт 59 | PF7 (ADC7/TDI) — Port F bit 7 / ADC channel 7 / JTAG TDI |
| Контакт 60 | AREF — ADC reference voltage |
| Контакт 61 | VCC — Digital supply voltage |
| Контакт 62 | GND — Ground |
| Контакт 63 | AVCC — Analog supply voltage for ADC |
| Контакт 64 | GND — Ground |
Типичное применение
ATMEGA128L-8ANR подходит для 6 применениеs: Industrial Automation and Process Control, Battery-Powered IoT Edge Nodes, Embedded Human-Machine Interface (HMI), Sensor Data Acquisition Systems, Motor Control and PWM Drivers, Legacy 5V Embedded Systems Upgrade.
Industrial Automation and Process Control
The ATMEGA128L-8ANR's 53 GPIO lines, four Timer/Counters with PWM, and dual USARTs make it a strong fit for industrial PLC and process-control modules where deterministic real-time response is required. The 8-channel 10-bit ADC handles analog sensor inputs (temperature, pressure, flow) directly, while the 128 KB Flash and 4 KB EEPROM provide ample headroom for Modbus RTU, CAN, or proprietary fieldbus protocol stacks. Wide 2.7 V to 5.5 V supply tolerance simplifies integration with both 24 V-derived 5 V rails and 3.3 V logic systems common in factory-automation backplanes.
Рекомендуется
Battery-Powered IoT Edge Nodes
The ATMEGA128L-8ANR's low-voltage 'L' silicon, six software-selectable sleep modes, and microampere-range power-down current suit battery-powered wireless sensor nodes. The 4 KB EEPROM enables non-volatile configuration storage without external memory ICs, and the integrated TWI (I2C) and SPI interfaces connect directly to sensors and sub-GHz radio modules such as the Microchip MRF89XA. JTAG-based on-chip debug accelerates firmware iteration during IoT product development, while the 64-pin TQFP package supports compact PCB layouts.
Рекомендуется
Embedded Human-Machine Interface (HMI)
With 128 KB Flash, 4 KB SRAM, and an integrated ADC, the ATMEGA128L-8ANR drives mid-complexity HMI panels including character LCDs, keypad matrices, and LED status indicators. The dual USARTs split communication between a host controller and an RS-485 fieldbus, while the four PWM channels drive backlight dimming, buzzer tones, and indicator brightness. Industrial temperature rating (-40 C to +85 C) and JTAG-based field firmware updates via bootloader make it suitable for ruggedized operator-interface panels.
Рекомендуется
Sensor Data Acquisition Systems
The ATMEGA128L-8ANR integrates an 8-channel 10-bit ADC, JTAG interface, and 53 GPIOs - ideal for multi-channel sensor data loggers in laboratory and field instrumentation. The 4 KB EEPROM provides non-volatile storage for calibration coefficients, while the 128 KB Flash hosts DSP-style filtering routines running at 1 MIPS per MHz. Combined with the SPI bus for high-speed external ADC or FRAM expansion, the device captures slow analog processes such as strain gauge bridges, thermocouples, and 4-20 mA loops with deterministic timing.
Рекомендуется
Motor Control and PWM Drivers
The four flexible Timer/Counters with PWM modes make the ATMEGA128L-8ANR a cost-effective platform for brushed DC and stepper motor control in small appliances, robotics, and CNC accessory axes. The 8 MHz clock drives up to four PWM channels with selectable phase-correct or fast-PWM modes, while the dual USARTs handle command input from a host controller. The 64-pin TQFP package dissipates modest heat at moderate PWM duty cycles, and the 5.5 V absolute maximum tolerates 5 V gate-driver rails for small H-bridges.
Рекомендуется
Legacy 5V Embedded Systems Upgrade
The ATMEGA128L-8ANR's 5.5 V absolute maximum and JTAG-based field upgrade path make it a natural choice for extending the lifecycle of legacy 5 V embedded controllers that must add connectivity or richer peripherals. With 128 KB Flash, designers can integrate Bluetooth/Wi-Fi co-processor command stacks, USB-to-UART bridges, or new sensor drivers without external memory. The ATmega128 is 100% pin-compatible with the older ATmega103, simplifying migration of legacy PCBs into modernized firmware architectures.
Рекомендуется
Сводка рекомендуемых товаров
Справочные инженерные данные для ATMEGA128L-8ANR — сравнение, рекомендации по проектированию и информация о соответствии.
Руководство по выбору
Сравнение с аналогами
| Параметр | Этот товар | ATMEGA128L-8AU | ATMEGA128L-8AN | ATMEGA128L-8MN | ATMEGA128-16AN | ATMEGA128-16AI |
|---|---|---|---|---|---|---|
| Package | 64-pin TQFP (14x14 mm) | 64-pin TQFP (14x14 mm) - same | 64-pin TQFP (14x14 mm) - same | 64-pin TQFP (14x14 mm) - same | 64-pin TQFP (14x14 mm) - same | 64-pin TQFP (14x14 mm) - same |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Maximum Clock Frequency | 8 MHz | 8 MHz | 8 MHz | 8 MHz | 16 MHz | 16 MHz |
| Supply Voltage Range | 2.7 V to 5.5 V | 2.7 V to 5.5 V | 2.7 V to 5.5 V | 2.7 V to 5.5 V | 4.5 V to 5.5 V | 4.5 V to 5.5 V |
| Flash Memory | 128 KB | 128 KB | 128 KB | 128 KB | 128 KB | 128 KB |
| SRAM | 4 KB | 4 KB | 4 KB | 4 KB | 4 KB | 4 KB |
| EEPROM | 4 KB | 4 KB | 4 KB | 4 KB | 4 KB | 4 KB |
| Packaging Format | Tape & Reel | Tray | Tray | Tray | Tray | Tray |
| Lifecycle Status | NRND (estimated EOL 2024) | NRND | NRND | Active | NRND | NRND |
Ключевые отличия
- Pin-and-silicon identical tray counterpart (против ATMEGA128L-8AU)
- Same-package higher-speed upgrade path (против ATMEGA128-16AN)
- Wide 2.7 V to 5.5 V supply tolerance vs 5V-only parts (против ATMEGA128-16AN)
Заметки по проектированию
Decouple the ATMEGA128L-8ANR supply rails with a 100 nF ceramic capacitor placed within 5 mm of each VCC pin (pins 10, 21, 30, 61) plus a 10 uF bulk capacitor on the AVCC pin (63). The 'L' variant operates down to 2.7 V but the maximum clock at that voltage is 8 MHz; operating above the rated frequency versus VCC curve will result in unstable Flash reads. Estimated: a 3.3 V system running at 8 MHz with 53 GPIOs switching at 1 MHz can source up to 200 mA peak supply transients.
Route the JTAG signals (TMS, TCK, TDI, TDO on PF4-PF7) away from switching signal traces to avoid debug interference, and place 4.7 kohm pull-up resistors on the TCK and TMS lines if the JTAG connector is removable. Keep the XTAL1/XTAL2 traces short and symmetric; crystal load capacitors (typically 12-22 pF) must match the crystal's rated load capacitance (CL) computed as CL = (C1 * C2) / (C1 + C2) + Cstray where Cstray is approximately 5 pF.
Do not program the JTAGEN fuse (OCDEN/JTAGEN bits) without first ensuring your programmer supports JTAG; disabling JTAG without an alternative ISP path will brick the device unless a high-voltage parallel programmer is available. The AREF pin must not exceed AVCC by more than 0.3 V or fall below 1.0 V without proper bypassing to avoid damage to the ADC. Finally, the external memory interface pins (PORTA, PORTC, PG0-PG2) must be disabled via the XMCR register when unused, or they will consume additional power and conflict with general-purpose I/O.
The TQFP-64 package has a typical theta_JA of approximately 50 C/W when mounted on a 4-layer JEDEC test board, which is adequate for typical MCU workloads (less than 100 mW). Estimated: in a sealed enclosure without airflow, derate maximum ambient by approximately 5 C per watt of dissipation above 0.5 W to keep the junction below 125 C. For industrial applications pushing high GPIO current loads, use ground-plane-connected thermal vias under the exposed die pad and minimize adjacent high-power traces.
Информация о соответствии
RoHS-compliant Green Pb-free package per Microchip environmental compliance data. AEC-Q100 not applicable - this is a general-purpose industrial-grade MCU. Conflict-mineral statement available from Microchip's corporate compliance page.
