ATMEGA645A-MUR - 8-bit AVR MCU 64KB Flash 64-QFN | Microchip
Артикул: ATMEGA645A-MUR ✓ Активен| Кол-во | Цена за ед. | Итого |
|---|---|---|
| 1 | $9.72 | $9,72 |
| 10 | $8.75 | $87,50 |
| 100 | $7.8 | $780,00 |
| 500 | $7.02 | $3.510,00 |
| 1.000 | $6.3 | $6.300,00 |
ATMEGA645A-MUR Обзор
An 8-bit AVR microcontroller is a self-contained computing IC that integrates a RISC processor core, program memory, data memory, peripherals, and general-purpose I/O on a single die. Within the power-management and embedded-systems hierarchy, MCUs like the ATmega645A sit at the application-control layer, executing user firmware that reads sensors, drives actuators, and manages communication in appliances, instruments, and industrial equipment.
Key features of the ATMEGA645A-MUR include the AVR enhanced RISC architecture executing most instructions in a single clock cycle, 54 general-purpose I/O lines (with the family supporting up to 54/69 I/O depending on package), 32 general-purpose working registers, in-system programmable Flash with read-while-write capability, and an industrial temperature range suitable for demanding environments. The A-suffix silicon revision offers improved performance over the original ATmega645.
Technically, the device combines a Harvard-architecture 8-bit core with 64 KB (32K x 16) Flash organized for ISP programming, 2 KB of nonvolatile EEPROM for parameter storage, and 4 KB of internal SRAM for runtime data. Peripherals typically include an 8-channel 10-bit ADC, analog comparator, USART serial interface, SPI, two-wire interface, timers/counters, and a JTAG interface for debugging and boundary scan, as described on the Microchip ATmega645A product page.
Typical applications include industrial control panels, HVAC and appliance controllers, battery-powered instrumentation, LED and LCD display systems, and embedded human-machine interfaces where a mid-range 8-bit MCU with generous Flash is required.
When designing with this part, note that it is a 4.5 V to 5.5 V supply device; ensure the power rail stays within this window and observe the indicated clock frequency rating for your temperature and voltage operating point.
This page synthesizes distributor pricing, drop-in family alternatives, and practical design notes not found in the manufacturer datasheet.
Аналоги без доработки для ATMEGA645A-MUR — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.
Варианты в этой серии
Модели той же серии, совместимые без доработки с ATMEGA645A-MUR (тот же форм-фактор и посадочное место) — отличается по Package, RoHS Status, Operating Temperature, EEPROM, EEPROM Size.
Инструмент быстрого сравнения — выберите альтернативные компоненты для сравнения бок о бок:
ATMEGA645-16MUR
✅ Прямая замена✓ В наличии
$3.35 / шт.
Открыть даташит →ATMEGA325A-MUR
✅ Прямая замена ⚠️ Характеристики не проверены✓ В наличии
$2.19 / шт.
Открыть даташит →ATMEGA329A-MUR
✅ Прямая замена ⚠️ Характеристики не проверены✓ В наличии
$3.61 / шт.
Открыть даташит →ATMEGA165A-MUR
✅ Прямая замена✓ В наличии
$1.19 / шт.
Открыть даташит →ATMEGA169A-MUR
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
ATMEGA645A-MUR Максимальные параметры и электрические характеристики
| Core Architecture | AVR 8-bit RISC |
| Flash Memory | 64 KB (32K x 16) ISP Flash |
| EEPROM | 2 KB |
| SRAM | 4 KB |
| Разрядность шины данных | 8 bit |
| Максимальная тактовая частота | 16 MHz (per DigiKey listing); family rated to 20 MHz |
| Напряжение питания | 4.5 V to 5.5 V |
| General Purpose I/O | 54 I/O lines (family 54/69 depending on package) |
| Working Registers | 32 general purpose |
| Корпус | 64-QFN / MLF, 9x9 mm |
| Тип монтажа | Surface Mount |
| Temperature Range | Industrial (-40C to +85C) |
| Programming | In-System Programmable (ISP) Flash, read-while-write |
| Debug Interface | JTAG (debugWIRE/ICSP supported via MPLAB SNAP) |
| Статус RoHS | Green / RoHS compliant (per FindIC listing) |
| Packaging | Tape & Reel (R suffix) |
| Статус жизненного цикла | Active |
Руководство по цоколевке ATMEGA645A-MUR в корпусе 64-qfn / mlf, 9x9 mm
Цоколевка для ATMEGA645A-MUR (корпус 64-qfn / mlf, 9x9 mm). Эта цифровая ИС включает выводы GPIO, интерфейсы связи (UART, SPI, I2C) и выводы питания. Обратитесь к техническому описанию производителя для альтернативных функций выводов и вариантов конфигурации. Необходимо для проектирования встраиваемых систем и трассировки печатных плат.
Нет подробных данных о распиновке для ATMEGA645A-MUR.
Обратитесь к даташиту для полной конфигурации выводов.
Типичное применение
ATMEGA645A-MUR подходит для 6 применениеs: Industrial Control Panels, Appliance and HVAC Controllers, LCD and Display Systems, Battery-Powered Instrumentation, Embedded Human-Machine Interfaces, Motor and Actuation Control Boards.
Industrial Control Panels
The ATMEGA645A-MUR fits industrial control panels because its 54 general-purpose I/O lines can drive relays, contactors, status lamps, and read numerous switches and sensors without port expanders. The 4.5 V to 5.5 V supply matches legacy 5 V industrial logic levels, simplifying interface to HMI boards and optocouplers. Its 64 KB ISP Flash accommodates communication stacks, state machines, and field-updatable firmware, while the 2 KB EEPROM stores calibration constants and configuration across power cycles. Industrial temperature rating (-40C to +85C) covers control-cabinet environments, and JTAG support enables in-circuit debugging during commissioning.
Рекомендуется
Appliance and HVAC Controllers
Home appliances and HVAC boards benefit from the ATMEGA645A-MUR's combination of 64 KB Flash for menu logic, sensor compensation algorithms, and fault logging, plus 4 KB SRAM for runtime state. The generous GPIO count directly interfaces keypad matrices, LED segments, triac/relay drivers, and temperature sensors. Because appliance designs frequently use 5 V rails derived from mains supplies, the MCU's 4.5-5.5 V window aligns without level shifting. The EEPROM retains user settings through power outages, and ISP Flash read-while-write capability allows firmware updates or parameter logging during operation, reducing service calls.
Рекомендуется
LCD and Display Systems
Display-driven products such as meters, thermostats, and set-top interfaces can use the ATMEGA645A-MUR to drive segment or dot-matrix displays; within the ATmega family, the pin-compatible ATmega329/649 variants add a dedicated LCD controller if segment LCD driving is needed on the same 64-QFN footprint. The 64 KB Flash holds font tables and graphics buffers, while the 4 KB SRAM manages framebuffer data. 54 GPIO lines support multiplexed LED displays and backlight control, and the 8-bit AVR core executes display refresh loops with deterministic timing, avoiding ghosting without a dedicated driver IC.
Рекомендуется
Battery-Powered Instrumentation
Portable instruments exploit the AVR ATmega645A's low-power idle and power-down sleep modes combined with its integrated 10-bit ADC for sensor acquisition, reducing external component count on battery-operated boards. The 64 KB Flash retains long code images including data-logging routines, and the 2 KB EEPROM stores calibration data that survives battery replacement. At 4.5-5.5 V operation, a single-cell boost converter or 4x AA/5 V LDO supply suffices. The industrial temperature rating supports field equipment, and ICSP programming through MPLAB SNAP allows field firmware updates via a two-wire plus reset interface without disassembly.
Рекомендуется
Embedded Human-Machine Interfaces
Embedded HMI nodes - keypads, rotary encoders, small touch controls, and indicator clusters - suit the ATMEGA645A-MUR because the AVR core's single-cycle execution gives responsive scan loops, and the large Flash supports multi-language menus and protocol translation between front panels and main controllers over USART, SPI, or two-wire serial links. The 54 GPIO lines directly support matrix scanning and LED indication. The A-suffix silicon provides an improved die revision for new designs, and the 64-QFN 9x9 mm footprint keeps board area compact while its exposed ground pad aids EMI performance in noisy electromechanical environments.
Рекомендуется
Motor and Actuation Control Boards
Small motor and actuator controllers use the ATMEGA645A-MUR's timers to generate PWM for DC motor drives and servo positioning, while its 10-bit ADC reads current shunts and position feedback for closed-loop control. The 5 V domain interfaces cleanly with gate-driver and H-bridge inputs, and the 64 KB Flash holds trajectory tables, commutation logic, and safety supervision code. Deterministic interrupt latency of the 8-bit AVR core supports tight control-loop timing, and the EEPROM retains limit positions and calibration. Industrial temperature rating and green RoHS packaging suit both consumer appliance and factory automation actuation boards.
Рекомендуется
Сводка рекомендуемых товаров
Справочные инженерные данные для ATMEGA645A-MUR — сравнение, рекомендации по проектированию и информация о соответствии.
Руководство по выбору
Сравнение с аналогами
| Параметр | Этот товар | ATMEGA645-16MUR | ATMEGA325A-MUR | ATMEGA165A-MUR | ATMEGA169A-MUR |
|---|---|---|---|---|---|
| Package | 64-QFN / MLF 9x9 mm | 64-QFN / MLF 9x9 mm - same | 64-QFN / MLF 9x9 mm - same | 64-QFN / MLF 9x9 mm - same | 64-QFN / MLF 9x9 mm - same |
| Brand | Microchip Technology (Atmel) | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Flash Memory | 64 KB | 64 KB | 32 KB | 16 KB | 16 KB |
| SRAM | 4 KB | 4 KB | 2 KB | 1 KB | 1 KB |
| EEPROM | 2 KB | 2 KB | 1 KB | 512 B | 512 B |
| Supply Voltage | 4.5 V to 5.5 V | 4.5 V to 5.5 V | 4.5 V to 5.5 V | 1.8 V to 5.5 V | 1.8 V to 5.5 V |
| Max Clock Frequency | 16 MHz (listed); family rated 20 MHz | 16 MHz | 20 MHz | 20 MHz | 20 MHz |
| LCD Controller | No | No | No | No | Yes |
Ключевые отличия
- Largest program memory in the pin-compatible 64-QFN family (против ATMEGA325A-MUR)
- A-suffix silicon improvement over the original part (против ATMEGA645-16MUR)
- 5 V native operation simplifies industrial interfaces (против ATMEGA165A-MUR)
Заметки по проектированию
The ATMEGA645A-MUR requires a 4.5 V to 5.5 V supply per the digchip specification summary. Design the 5 V rail with at least 100 nF decoupling per power pin plus a 10 uF bulk capacitor, and place them within a few millimeters of the QFN pads. If the design derives 5 V from a wide-input buck converter, verify ripple never breaches the 5.5 V ceiling under load transients, as AVCC and VCC must stay within ratings for the ADC and Flash write operations to remain valid.
The 64-QFN (9x9 mm) MLF package has a large exposed ground pad on the underside that must be soldered to a grounded via array - typically 5x5 or more vias connecting to the internal ground plane. Failure to adequately ground this pad is a common first-article bring-up problem, causing floating grounds, ADC noise, and intermittent resets. Follow the Microchip MLF/QFN application recommendations for stencil aperture design (about 50-70% pad coverage) to avoid voiding under the die paddle.
Reserve the JTAG pins and the ICSP lines (MOSI, MISO, SCK, RESET) on a header during layout, because the MPLAB SNAP programmer uses two I/O pins plus reset for in-circuit debugging and ISP programming per Microchip's product page. Also verify clock-source configuration before switching from internal RC to external crystal: an incorrect fuse setting can brick the part on a PCB without a recovery clock. Confirm the 16 MHz/20 MHz frequency rating against your actual supply voltage per the datasheet speed-versus-voltage curves.
Информация о соответствии
Listed as 'Green' (Microchip green/RoHS packaging) and industrial temperature, Tape & Reel per FindIC. AEC-Q100 qualification not stated in provided data for this consumer/industrial-grade MCU.
