ATSAM3U1EA-CU - 96MHz ARM Cortex-M3 64KB Flash MCU
Артикул: ATSAM3U1EA-CU ✓ Активен| Кол-во | Цена за ед. | Итого |
|---|---|---|
| 1 | $0 | $0,00 |
| 10 | $0 | $0,00 |
| 100 | $0 | $0,00 |
| 500 | $0 | $0,00 |
| 1.000 | $0 | $0,00 |
ATSAM3U1EA-CU Обзор
A microcontroller is a programmable semiconductor that integrates a processor core, memory, and peripherals into one device. The ATSAM3U1EA-CU follows the hierarchy ARM Cortex-M3 core → 32-bit RISC microcontroller → embedded microcontroller → semiconductor. Its compact BGA package supports dense PCB layouts, while the 96 MHz operating speed provides a practical balance between processing performance, power consumption, and design complexity for control-oriented embedded systems.
Key features include a 96 MHz ARM Cortex-M3 processor, 64 KB Flash, 20 KB SRAM, DMA, PWM, watchdog timer, I2S, and high-speed USB device support with an embedded transceiver. The verified component description also identifies high-speed MCI support for SDIO, SD, and MMC interfaces, along with two 10-bit and two 12-bit ADC groups. These peripherals reduce the need for external interface devices and make the MCU suitable for connected industrial, communications, and data-acquisition equipment.
The SAM3U architecture combines a 32-bit RISC processor with dedicated hardware peripherals for data movement and real-time control. DMA improves peripheral throughput by transferring data with less CPU intervention, while PWM and watchdog functions support deterministic timing and system monitoring. The 144-BGA package exposes the high peripheral count in a compact 13 mm by 13 mm footprint, but BGA layout requires careful escape routing, thermal-via planning, and assembly inspection.
Typical applications include USB-connected control systems, industrial data loggers, SD-card or MMC data storage, motor and power-control platforms, audio interfaces using I2S, and embedded communications equipment. The 64 KB Flash capacity is appropriate for firmware that integrates control logic, USB firmware, and peripheral drivers without requiring an external memory device.
Design consideration: the 144-BGA package and 1.62 V to 3.6 V supply range require careful decoupling, controlled-layout routing, and validation of signal integrity at the 96 MHz operating speed. Confirm pin assignments and BGA escape-routing requirements against the manufacturer datasheet before releasing a PCB design.
This page consolidates the verified distributor specifications, practical application guidance, and replacement considerations for ATSAM3U1EA-CU, while clearly separating unavailable data from confirmed manufacturer information.
Аналоги без доработки для ATSAM3U1EA-CU — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.
Варианты в этой серии
Модели той же серии, совместимые без доработки с ATSAM3U1EA-CU (тот же форм-фактор и посадочное место) — отличается по Package, Memory Protection Unit, USB, Instruction Set, Mounting Type.
Инструмент быстрого сравнения — выберите альтернативные компоненты для сравнения бок о бок:
ATSAM3U1EB-CU
✅ Прямая замена✓ В наличии
$4.59 / шт.
Открыть даташит →ATSAM3U1EA-CU
✅ Прямая замена✓ В наличии
Уточнить цену
Открыть даташит →ATSAM3U2EA-CU
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
ATSAM3U4EA-CU
✅ Прямая замена✓ В наличии
$12.05 / шт.
Открыть даташит →ATSAM3U1EACU
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
ATSAM3U1EA-CU Максимальные параметры и электрические характеристики
| Processor Core | ARM Cortex-M3, 32-bit RISC |
| Maximum Operating Frequency | 96 MHz |
| Embedded Flash Memory | 64 KB |
| SRAM | 20 KB |
| Supply Voltage Range | 1.62 V to 3.6 V |
| Корпус | 144-BGA (13x13) |
| Package Type | Surface-mount LFBGA |
| Диапазон рабочих температур | -40°C to +85°C |
| USB | High-speed USB device port with embedded transceiver |
| Memory Card Interface | High-speed MCI for SDIO, SD, and MMC |
| DMA | Supported |
| PWM | Supported |
| Watchdog Timer | Supported |
| I2S | Supported |
| ADC | Two 10-bit and two 12-bit ADC groups |
| Instruction Set | Thumb-2 instruction set |
| Memory Protection Unit | MPU |
Руководство по цоколевке ATSAM3U1EA-CU в корпусе surface-mount lfbga
Цоколевка для ATSAM3U1EA-CU (корпус surface-mount lfbga). Эта цифровая ИС включает выводы GPIO, интерфейсы связи (UART, SPI, I2C) и выводы питания. Обратитесь к техническому описанию производителя для альтернативных функций выводов и вариантов конфигурации. Необходимо для проектирования встраиваемых систем и трассировки печатных плат.
Нет подробных данных о распиновке для ATSAM3U1EA-CU.
Обратитесь к даташиту для полной конфигурации выводов.
Типичное применение
ATSAM3U1EA-CU подходит для 6 применениеs: USB Embedded Control, Industrial Data Logging, SD or MMC Data Storage, Audio Interface and I2S Control, Motor and PWM Control, USB Audio and Communication Equipment.
USB Embedded Control
ATSAM3U1EA-CU fits USB-connected control products because its verified feature set includes a high-speed USB device port with an embedded transceiver, while the ARM Cortex-M3 core operates at up to 96 MHz. The MCU can execute device firmware, manage control states, and exchange data with a host without adding a separate USB controller. Its 64 KB Flash and 20 KB SRAM provide a defined firmware and working-memory budget for compact peripherals, gateways, and service tools. The design must still budget USB routing, power-supply noise, firmware stack requirements, and connector protection before production release.
Рекомендуется
Industrial Data Logging
ATSAM3U1EA-CU is suitable for industrial data-logging equipment that must acquire sensor data and retain it locally. Its verified ADC resources include two 10-bit and two 12-bit ADC groups, while DMA can move captured data with less processor intervention. The 96 MHz Cortex-M3 core supports formatting, timestamping, and communication tasks, and the 64 KB Flash can hold firmware when the application does not exceed that budget. A robust design should add memory-card storage through the verified high-speed MCI interface and validate analog input conditioning and industrial temperature requirements from -40°C to +85°C.
Рекомендуется
SD or MMC Data Storage
ATSAM3U1EA-CU is a practical fit for products that need removable or embedded SD, SDIO, or MMC storage. The verified SAM3U description identifies a high-speed MCI peripheral for those media, while the 96 MHz processor can service file-system activity and control logic. The 20 KB SRAM helps buffer transfers, although sustained logging and complex file systems may require careful DMA and buffer planning. Designers should check the exact MCI pin mapping, electrical levels, card support, and timing constraints in the manufacturer documentation; the package and memory figures alone do not guarantee application compatibility.
Рекомендуется
Audio Interface and I2S Control
ATSAM3U1EA-CU can serve compact audio-control and interface equipment because I2S is included in the verified peripheral set. The 96 MHz Cortex-M3 core is sufficient for protocol handling and control tasks, while DMA can support repetitive audio transfers with reduced CPU loading. The device is not an audio DAC by itself, so an external converter, amplifier, and protection network may be required. Firmware must establish correct I2S timing, clock configuration, buffer management, and fault recovery, and the 64 KB Flash limit should be checked against any required codec and USB firmware stack.
Рекомендуется
Motor and PWM Control
ATSAM3U1EA-CU is suitable for embedded motor-control and actuator platforms that benefit from a 96 MHz Cortex-M3 core and integrated PWM, DMA, and watchdog resources. PWM channels can generate deterministic control signals, DMA can exchange data with external peripherals, and the watchdog supports system recovery. The MCU is a controller, not a power stage, so MOSFETs, gate drivers, current sensing, and protection must be added according to the motor voltage and current. The 1.62 V to 3.6 V supply range and -40°C to +85°C operating specification should be checked against the actuator environment.
Рекомендуется
USB Audio and Communication Equipment
ATSAM3U1EA-CU can support USB-connected communication and service equipment because the verified feature set combines high-speed USB, UART-class serial control capability within the MCU family, DMA, and I2S. This combination can serve as the basis for configuration tools, audio accessories, and protocol bridges, although the exact peripheral assignments must be verified against the datasheet. At 96 MHz, the processor provides headroom for protocol stacks and buffering, while 20 KB SRAM constrains simultaneous buffers. Designers should budget USB descriptor storage, class-driver memory, firmware update space, and connector ESD protection before selecting the device.
Рекомендуется
Сводка рекомендуемых товаров
Справочные инженерные данные для ATSAM3U1EA-CU — сравнение, рекомендации по проектированию и информация о соответствии.
Руководство по выбору
Сравнение с аналогами
| Параметр | Этот товар | ATSAM3U1EB-CU | ATSAM3U2EA-CU | ATSAM3U4EA-CU | ATSAM3U1EACU |
|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
Ключевые отличия
- Verified 96 MHz ARM Cortex-M3 performance configuration (против ATSAM3U1EB-CU)
- High-speed USB and memory-card integration (против ATSAM3U2EA-CU)
- Memory footprint balance (против ATSAM3U2EA-CU)
- Compact 144-BGA integration (против ATSAM3U4EA-CU)
Заметки по проектированию
Treat the 144-BGA footprint as a high-density routing constraint. Plan escape vias and layer transitions before placing the MCU, keep power and ground connections short, and preserve symmetric signal paths where possible. Because the verified data does not provide exact ball-map or recommended-land-pattern dimensions, use the current manufacturer package drawing and assembly land pattern as the controlling PCB source.
Design the supply network for the verified 1.62 V to 3.6 V operating range and validate startup, load transients, and noise margins. Place the required decoupling structures close to the MCU power balls, keep analog and digital return paths controlled, and verify the regulator's stability requirements against the actual load and capacitor selection. The available data does not specify exact capacitor values, so those values must come from the manufacturer reference design.
At 96 MHz, route clocks, USB, MCI, and other high-speed signals with continuous return paths and controlled impedance. Avoid routing sensitive signals through power or split-plane regions, and use the package's available escape layers consistently. Check USB and memory-card timing margins with the actual external device, connector, and PCB stack-up rather than relying only on nominal MCU frequency.
Do not substitute ATSAM3U1EB-CU, ATSAM3U2EA-CU, or ATSAM3U4EA-CU solely because the comparison pages show a 144-BGA family association. Compare every power ball, ground ball, USB connection, MCI connection, analog input, clock, reset, and exposed signal before approving a substitution. The supplied data does not provide complete pin-level compatibility for these candidates.
The verified operating-temperature range is -40°C to +85°C, but the supplied material does not provide junction-temperature limits, thermal resistance, or package dissipation curves. Use the manufacturer thermal data to estimate self-heating under the actual clock, I/O, and peripheral load. Keep the BGA thermal and ground-via arrangement consistent with the package drawing and validate junction temperature rather than relying on ambient temperature alone.
Информация о соответствии
The supplied verified data does not state RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status for ATSAM3U1EA-CU. AEC-Q100 is marked not_applicable because no automotive qualification is identified in the provided material.
