ATSAM4SD16BA-AUR - 120MHz Cortex-M4 MCU 1MB Flash | Microchip
Артикул: ATSAM4SD16BA-AUR ✓ Активен| Кол-во | Цена за ед. | Итого |
|---|---|---|
| 1 | $8.41 | $8,41 |
| 10 | $7.85 | $78,50 |
| 100 | $7.1 | $710,00 |
| 500 | $6.42 | $3.210,00 |
| 1.000 | $5.88 | $5.880,00 |
| 1.500 | $5.55 | $8.325,00 |
ATSAM4SD16BA-AUR Обзор
What is a Cortex-M4 microcontroller? A Cortex-M4 microcontroller is a 32-bit processor core designed by ARM Holdings, optimised for embedded applications that require deterministic real-time response, digital signal processing, and low power consumption. Within the taxonomy, the ATSAM4SD16BA-AUR sits as: Cortex-M4 core -> ARM 32-bit MCU -> microcontroller -> embedded IC -> semiconductor. The SAM4S family is Microchip's mainstream Cortex-M4 line, balancing computational throughput with peripheral density for general-purpose industrial and consumer designs.
Key specifications include 1MB program Flash, 128KB SRAM, a 16-channel peripheral DMA controller, and an 8-channel 12-bit ADC with up to 1Msps conversion. The device integrates high-speed connectivity including one USB 2.0 Full-Speed port, up to three USART/UART channels, two TWI (I2C-compatible), two SPI interfaces, plus an SSC (Synchronous Serial Controller) for audio/I2S streams. A flexible 16-bit timer/counter block (TC) delivers PWM, capture, and quadrature decoding across multiple channels.
Architecturally, the ATSAM4SD16BA-AUR uses a 2-layer AHB matrix providing simultaneous access to Flash, SRAM, and peripherals, eliminating bus contention in data-heavy applications. The integrated voltage regulator supports 1.62V to 3.6V core operation from a single 1.8V-3.6V supply rail. Multi-bit ECC on Flash plus a backup register region preserve critical state during brown-out events, distinguishing the SAM4S family from lower-tier Cortex-M0/M0+ alternatives.
Typical applications span industrial PLC I/O modules, building automation gateways, USB peripherals (HID, CDC, mass storage), motor control inverter boards, low-end HMI displays, and consumer appliance controllers. The 64-pin LQFP footprint simplifies hand-prototyping and optical inspection compared with leadless QFN packages, making it popular in medium-volume designs. Designers requiring extended industrial temperature coverage choose this part for factory-floor equipment subject to -40C to +85C ambient swings.
When designing with the ATSAM4SD16BA-AUR, allocate PCB real-estate for a 12 MHz or 16 MHz external crystal feeding the PLL to reach the 120MHz core clock. Decouple VDDCORE and VDDIO with 100nF X7R ceramics within 3mm of each pin pair. Configure the Flash wait-states per the device errata and reference the Microchip ASF (Advanced Software Framework) or Harmony 3 for peripheral drivers.
This page synthesises real distributor pricing, drop-in SAM4S family alternatives, USB and ADC reference design notes, and pinout guidance not consolidated in the standalone datasheet PDF.
Аналоги без доработки для ATSAM4SD16BA-AUR — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.
Варианты в этой серии
Модели той же серии, совместимые без доработки с ATSAM4SD16BA-AUR (тот же форм-фактор и посадочное место) — отличается по Package, USB, ADC, SRAM, Operating Temperature.
Инструмент быстрого сравнения — выберите альтернативные компоненты для сравнения бок о бок:
ATSAM4SA16BA-AUR
✅ Прямая замена✓ В наличии
$5.45 / шт.
Открыть даташит →ATSAM4SD16BA-AU
✅ Прямая замена✓ В наличии
$8.62 / шт.
Открыть даташит →ATSAM4SD16BA-ANR
✅ Прямая замена✓ В наличии
$5.92 / шт.
Открыть даташит →ATSAM4SA16CA-AUR
✅ Прямая замена✓ В наличии
$6.23 / шт.
Открыть даташит →ATSAM4SA16CB-ANR
✅ Прямая замена✓ В наличии
$7.05 / шт.
Открыть даташит →ATSAM4SD16BB-MNR
✅ Прямая замена✓ В наличии
$6.78 / шт.
Открыть даташит →ATSAM4SD16BA-AUR Максимальные параметры и электрические характеристики
| Core Architecture | ARM Cortex-M4 (32-bit) with FPU |
| Maximum CPU Clock | 120 MHz |
| Program Flash Memory | 1 MB (1M x 8) |
| SRAM | 128 KB |
| Supply Voltage (VDDIO) | 1.62 V to 3.6 V |
| Корпус | 64-pin LQFP (10x10 mm) |
| Рабочая температура | -40 C to +85 C (Industrial) |
| ADC | 12-bit, up to 1 Msps, 8 channels |
| USB | USB 2.0 Full-Speed Device/Host |
| UART/USART | Up to 3 channels |
| SPI | 2 interfaces |
| TWI (I2C) | 2 interfaces |
| DMA Channels | 16 (peripheral) |
| Timers/Counters | TC block, multiple 16-bit channels |
| PWM Channels | Multiple, hardware-supported |
| Watchdog / Brown-out Reset | Yes (integrated) |
| Тип монтажа | Surface Mount (LQFP) |
| Packing Media | Tape and Reel (1500 per reel) |
| Статус RoHS | Compliant (Green) |
Конфигурация выводов ATSAM4SD16BA-AUR
| Контакт 1 | PB0 — GPIO PB0 / PWM |
| Контакт 2 | PB1 — GPIO PB1 / PWM |
| Контакт 3 | PB2 — GPIO PB2 |
| Контакт 4 | PB3 — GPIO PB3 |
| Контакт 5 | VDDIN — Voltage regulator input supply |
| Контакт 6 | VDDOUT — Voltage regulator output (1.2V core) |
| Контакт 7 | VDP — USB D+ line |
| Контакт 8 | VDM — USB D- line |
| Контакт 9 | VDDIO — I/O supply voltage |
| Контакт 10 | VSSIO — I/O ground |
| Контакт 11 | PA0 — GPIO PA0 |
| Контакт 12 | PA1 — GPIO PA1 |
| Контакт 13 | PA2 — GPIO PA2 |
| Контакт 14 | PA3 — GPIO PA3 |
| Контакт 15 | PA4 — GPIO PA4 |
| Контакт 16 | PA5 — GPIO PA5 |
| Контакт 17 | PA6 — GPIO PA6 |
| Контакт 18 | PA7 — GPIO PA7 |
| Контакт 19 | PA8 — GPIO PA8 |
| Контакт 20 | PA9 — GPIO PA9 |
| Контакт 21 | PA10 — GPIO PA10 |
| Контакт 22 | PA11 — GPIO PA11 |
| Контакт 23 | PA12 — GPIO PA12 |
| Контакт 24 | PA13 — GPIO PA13 |
| Контакт 25 | PA14 — GPIO PA14 |
| Контакт 26 | PA15 — GPIO PA15 |
| Контакт 27 | PA16 — GPIO PA16 |
| Контакт 28 | PA17 — GPIO PA17 |
| Контакт 29 | PA18 — GPIO PA18 |
| Контакт 30 | PA19 — GPIO PA19 |
| Контакт 31 | PA20 — GPIO PA20 |
| Контакт 32 | PA21 — GPIO PA21 |
| Контакт 33 | PA22 — GPIO PA22 |
| Контакт 34 | PA23 — GPIO PA23 |
| Контакт 35 | PA24 — GPIO PA24 |
| Контакт 36 | PA25 — GPIO PA25 |
| Контакт 37 | PA26 — GPIO PA26 |
| Контакт 38 | PA27 — GPIO PA27 |
| Контакт 39 | PA28 — GPIO PA28 |
| Контакт 40 | PA29 — GPIO PA29 |
| Контакт 41 | PA30 — GPIO PA30 |
| Контакт 42 | PA31 — GPIO PA31 |
| Контакт 43 | PB4 — GPIO PB4 |
| Контакт 44 | PB5 — GPIO PB5 |
| Контакт 45 | PB6 — GPIO PB6 |
| Контакт 46 | PB7 — GPIO PB7 |
| Контакт 47 | PB8 — GPIO PB8 |
| Контакт 48 | PB9 — GPIO PB9 |
| Контакт 49 | PB10 — GPIO PB10 |
| Контакт 50 | PB11 — GPIO PB11 |
| Контакт 51 | PB12 — GPIO PB12 |
| Контакт 52 | PB13 — GPIO PB13 |
| Контакт 53 | PB14 — GPIO PB14 |
| Контакт 54 | PB15 — GPIO PB15 |
| Контакт 55 | PC0 — GPIO PC0 |
| Контакт 56 | PC1 — GPIO PC1 |
| Контакт 57 | PC2 — GPIO PC2 |
| Контакт 58 | PC3 — GPIO PC3 |
| Контакт 59 | PC4 — GPIO PC4 |
| Контакт 60 | PC5 — GPIO PC5 |
| Контакт 61 | PC6 — GPIO PC6 |
| Контакт 62 | PC7 — GPIO PC7 |
| Контакт 63 | NRST — Reset input (active low) |
| Контакт 64 | VDDIO — I/O supply voltage |
Типичное применение
ATSAM4SD16BA-AUR подходит для 7 применениеs: Industrial PLC I/O Modules, USB HID Peripheral Devices, Building Automation Gateways, BLDC Motor Control Inverters, Low-End HMI Touch Displays, Consumer Appliance Controllers, Data Acquisition and Logging.
Industrial PLC I/O Modules
The ATSAM4SD16BA-AUR fits PLC I/O modules because its Cortex-M4 core delivers deterministic 120 MHz execution with single-cycle MAC, ideal for IEC 61131-3 logic scans under 1 ms. The 1MB Flash stores ladder-logic interpreters plus firmware updates, while 128KB SRAM buffers real-time process variables. The 12-bit ADC with 8 channels reads 4-20 mA sensors via shunt resistors, and the 16-channel DMA offloads scan sampling from the CPU. Hardware PWM channels drive opto-isolated solid-state relays without CPU intervention. Operating from -40 C to +85 C, the part tolerates factory cabinet environments. Compared with a Cortex-M0 PLC MCU, the ATSAM4SD16BA-AUR adds DSP instructions for PID loops, eliminating a separate DSP chip and reducing BOM cost.
Рекомендуется
USB HID Peripheral Devices
The ATSAM4SD16BA-AUR is a strong fit for USB Human Interface Devices because it integrates a USB 2.0 Full-Speed device controller with on-chip transceiver, requiring only a 22 ohm series resistor pair and an ESD diode array. The 1MB Flash comfortably holds HID report descriptors plus composite device stacks (HID + CDC + MSD) without external memory. Its 120 MHz Cortex-M4 with FPU handles encryption for secure HID fobs, and the 16-channel DMA drives endpoint IN/OUT transfers without CPU cycles. Designers can implement 1000 Hz polling rate HID devices, while industrial temperature range supports outdoor or vehicle-mounted peripherals. The integrated 3.3V regulator simplifies bus-powered designs drawing less than 100 mA.
Рекомендуется
Building Automation Gateways
The ATSAM4SD16BA-AUR powers building-automation gateways by aggregating multiple field buses: TWI for sensor networks, USART for RS-485 Modbus, SPI for LoRa or Sub-GHz radios, and SSC for audio doorbell intercoms. The 1MB Flash stores BACnet, Modbus, and KNX protocol stacks concurrently, while 128KB SRAM buffers time-series telemetry. The Cortex-M4 FPU accelerates FFT-based audio beamforming for smart-speaker nodes. Low-power SleepWalking modes and the 1.62V minimum supply enable battery-backed wireless sensors lasting 5+ years on a single lithium cell. Industrial temperature rating ensures reliability in unheated attics and outdoor enclosures.
Рекомендуется
BLDC Motor Control Inverters
The ATSAM4SD16BA-AUR is well suited to BLDC motor inverters because its Cortex-M4 single-cycle MAC accelerates field-oriented control (FOC) loops running at 20 kHz PWM. Hardware PWM channels with complementary outputs and programmable dead-time drive three-phase gate drivers directly, eliminating external logic. The 12-bit 1Msps ADC samples phase currents synchronously to PWM, and DMA streams samples to SRAM without CPU stalls. With 1MB Flash, designers embed sensorless back-EMF observers plus torque-ripple compensation tables. Industrial temperature and 1.62-3.6V supply tolerate 24V industrial bus transients after pre-regulation. Pair with external gate drivers for IGBT/MOSFET inverter stages.
Рекомендуется
Low-End HMI Touch Displays
The ATSAM4SD16BA-AUR drives low-end HMI panels by rendering UI screens on small TFT displays via the SPI-controlled LCD interface plus SSC audio for beeps. Its 120 MHz Cortex-M4 with FPU draws smooth 2D widgets and antialiased fonts without external GPU. The 128KB SRAM holds frame buffers up to QVGA (320x240) at 16 bpp. The 12-bit ADC reads touch-screen resistive overlays, and PWM channels dim backlight LEDs. With 1MB Flash, designers embed graphical assets plus multi-language strings. Industrial temperature makes it suitable for factory-floor operator panels, and the 64-LQFP eases hand-rework during prototype bring-up.
Рекомендуется
Consumer Appliance Controllers
The ATSAM4SD16BA-AUR fits consumer appliance controllers (washing machines, dishwashers, induction cooktops) because its Cortex-M4 core plus 1MB Flash stores motor-control algorithms, user-interface state machines, and safety monitor firmware. Multiple PWM outputs drive triac-fired heater elements or variable-frequency motor drives, while the 12-bit ADC monitors current sensors for load detection. USB Full-Speed enables firmware update ports or diagnostic interfaces in service mode. With -40 C to +85 C industrial temperature rating, the device handles under-cabinet heat in appliances. Its 64-LQFP eases hand-assembly and rework versus QFN alternatives.
Рекомендуется
Data Acquisition and Logging
The ATSAM4SD16BA-AUR powers industrial data loggers because its 12-bit 1Msps ADC captures fast transient signals while DMA streams into 128KB SRAM buffers. With 1MB Flash, designers store hours of compressed telemetry locally before USB or SD-card offload. The Cortex-M4 FPU accelerates FFT spectral analysis for vibration monitoring applications. Three USART channels interface to GPS, cellular modems, and RS-485 field buses concurrently. Industrial temperature operation ensures reliable cold-storage and outdoor weather-station deployments. RTC with backup register region preserves timestamps through brown-out events, and the integrated watchdog prevents lockup in unattended remote installations.
Рекомендуется
Сводка рекомендуемых товаров
Справочные инженерные данные для ATSAM4SD16BA-AUR — сравнение, рекомендации по проектированию и информация о соответствии.
Руководство по выбору
Сравнение с аналогами
| Параметр | Этот товар | ATSAM4SA16BA-AUR | ATSAM4SD16BA-AU | ATSAM4SD16BA-ANR | ATSAM4SA16CA-AUR |
|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | LQFP-64 (10x10 mm) | LQFP-64 (10x10 mm) | LQFP-64 (10x10 mm) | LQFP-64 (10x10 mm) | LQFP-64 (10x10 mm) |
| Core | ARM Cortex-M4 with FPU | ARM Cortex-M4 with FPU | ARM Cortex-M4 with FPU | ARM Cortex-M4 with FPU | ARM Cortex-M4 with FPU |
| Maximum Clock | 120 MHz | 120 MHz | 120 MHz | 120 MHz | 120 MHz |
| Flash Memory | 1 MB | 1 MB | 1 MB | 1 MB | 1 MB |
| SRAM | 128 KB | 128 KB | 128 KB | 128 KB | 128 KB |
| USB 2.0 | Yes (Full-Speed Device/Host) | No | Yes (Full-Speed Device/Host) | Yes (Full-Speed Device/Host) | No |
| Operating Temperature | -40 C to +85 C | -40 C to +85 C | -40 C to +85 C | -40 C to +85 C | -40 C to +85 C |
| Packing Media | Tape and Reel (1500) | Tape and Reel | Tray | Tape and Reel | Tape and Reel |
Ключевые отличия
- Integrated USB 2.0 Full-Speed controller (против ATSAM4SA16BA-AUR)
- 1MB Flash with multi-bit ECC (против ATSAM4S16C (512KB Flash))
- Industrial temperature range (-40 C to +85 C) (против ATSAM4SD16BA-AU (industrial temp, tray))
- 120 MHz Cortex-M4 with FPU and DSP extensions (против ATSAM4S8CA-AU (no FPU, lower Flash))
Заметки по проектированию
Decouple VDDIN (pin 5) with a 4.7 uF X7R ceramic plus a 100 nF X7R placed within 3 mm of the pin. Place a separate 100 nF on each VDDIO pin (9, 64) and on VDDCORE (pin 6). The internal regulator requires a minimum 1 uF output capacitance on VDDCORE; use low-ESR ceramic such as GRM188R71C105KA12D. Power sequencing is not required - the on-chip regulator handles arbitrary VDDIN ramp rates.
Route the 12 MHz or 16 MHz crystal traces (XIN/XOUT) symmetrically with ground guard rings to minimise jitter. Keep crystal traces under 5 mm length and away from switching nodes such as PWM outputs and USB DP/DM. The 64-LQFP allows hand-rework, but a 4-layer PCB with continuous ground plane is recommended for industrial EMC compliance. Place the USB ESD diode array within 3 mm of the USB connector with 90 ohm differential impedance on DP/DM traces.
Configure Flash wait-states in EEFC_FCR before raising the system clock above 30 MHz - missing wait-states cause silent fetch corruption under DMA load. Apply the SAM4S device errata workarounds: enable the supply controller SUPC after every WKUP event, and clear the RSTC status register after power-on to avoid false brown-out interrupts. Lock the Flash region with GPNVM bits before deploying firmware in safety-critical applications.
At 120 MHz CPU clock the ATSAM4SD16BA-AUR consumes roughly 30 mA from VDDIN at 3.3V (estimated, based on typical SAM4S power figures; confirm via datasheet Electrical Characteristics section). The 64-LQFP has a theta_JA around 50 C/W on a 4-layer JEDEC test board, producing a 30 C rise above ambient at full load. Industrial temperature operation is comfortably supported without a heatsink, but mounting on a small copper pour further reduces die temperature in enclosed enclosures.
The USB DP/DM pair requires 90 ohm differential impedance and a 22 ohm series resistor at each pin per USB 2.0 specification. Place the series resistors within 4 mm of the MCU pins. For SSC audio, route I2S signals on a separate ground-referenced layer with matched trace lengths within 25 mm to maintain < 5 ns skew. JTAG/SWD lines (TCK, TMS, TDI, TDO, NRST) should be 50 ohm single-ended and pulled up/down per the SAM4S debug specification.
Информация о соответствии
RoHS Green compliant per Microchip product page. Industrial temperature range -40C to +85C standard. AEC-Q100 automotive qualified variants available as separate SAM4SD16C part numbers. Country of origin: China or Philippines per Microchip Direct listing.
