ATSAMA5D24A-CUR - 500MHz Cortex-A5 MPU, 256-TFBGA | Microchip
Артикул: ATSAMA5D24A-CUR ✓ Активен| Кол-во | Цена за ед. | Итого |
|---|---|---|
| 1 | $13.45 | $13,45 |
| 10 | $12.18 | $121,80 |
| 100 | $10.85 | $1.085,00 |
| 500 | $9.62 | $4.810,00 |
| 1.000 | $8.95 | $8.950,00 |
ATSAMA5D24A-CUR Обзор
An ARM Cortex-A5 MPU is a microprocessor unit based on the ARMv7-A architecture that delivers application-processor class performance with very low power consumption, making it the right choice when an MCU is insufficient but a full power-hungry application processor is overkill. The SAMA5D2 family sits in the hierarchy: ARM Cortex-A core -> application-class MPU -> embedded microprocessor -> integrated circuit. The Cortex-A5 implements the ARMv7-A instruction set with optional NEON SIMD and floating-point unit support, balancing MHz-per-mW efficiency with deterministic real-time behavior.
Key differentiating features of the ATSAMA5D24A-CUR include 5 uA backup-mode current for battery-backed designs, an embedded peripheral touch controller, hardware AES/OTF crypto accelerators for secure boot, an integrated LCD controller up to WXGA resolution, 10/100 Mbps Ethernet MAC, USB 2.0 with HSIC, and multiple connectivity peripherals (CAN, I2S, I2C, SPI, UART). The SAMA5D2 architecture uses a simple power management scheme that eliminates external PMIC complexity for many designs. The 8x8 mm ultra-small BGA package enables high-density PCB layouts while the industrial temperature grade (-40C to +85C) suits HMI and industrial gateway deployments.
Typical applications include industrial HMI panels, smart energy gateways, barcode scanners, building automation controllers, medical patient monitors, and portable data acquisition terminals. The 256-TFBGA package supports high-speed signal routing while keeping the PCB footprint compact enough for space-constrained designs. When designing with this part, allocate sufficient PCB layers (at least 4) for the DDR memory interface and follow Microchip application notes for BGA fanout and decoupling. The enable pin and reset architecture support clean power sequencing with backup battery domains.
Аналоги без доработки для ATSAMA5D24A-CUR — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.
Варианты в этой серии
Модели той же серии, совместимые без доработки с ATSAMA5D24A-CUR (тот же форм-фактор и посадочное место) — отличается по Ethernet, Package, USB, Backup Mode Current, Core Architecture.
Инструмент быстрого сравнения — выберите альтернативные компоненты для сравнения бок о бок:
ATSAMA5D24A-CU
✅ Прямая замена✓ В наличии
$9.85 / шт.
Открыть даташит →ATSAMA5D24B-CU
✅ Прямая замена✓ В наличии
$10.42 / шт.
Открыть даташит →ATSAMA5D23A-CUR
✅ Прямая замена✓ В наличии
$8.95 / шт.
Открыть даташит →ATSAMA5D22C-CU
✅ Прямая замена✓ В наличии
$7.14 / шт.
Открыть даташит →ATSAMA5D21B-CU
✅ Прямая замена✓ В наличии
$9.8 / шт.
Открыть даташит →ATSAMA5D24A-CUR Максимальные параметры и электрические характеристики
| Manufacturer | Microchip Technology |
| Series | SAMA5D2 |
| Core Processor | ARM Cortex-A5 |
| Core Architecture | ARMv7-A |
| Number of Cores | 1 |
| Разрядность шины данных | 32-bit |
| Maximum Clock Speed | 500 MHz |
| Internal SRAM | 128 KB |
| Instruction/Data Cache | 32 KB each |
| Multimedia Co-processor | NEON MPE |
| External Memory Support | DDR2, DDR3L, LPDDR2, LPDDR3, QSPI, e.MMC |
| Корпус | 256-TFBGA (8x8 mm) |
| Рабочая температура | -40C to +85C (Industrial) |
| Backup Mode Current | 5 uA |
| Graphics Acceleration | Yes (2D) |
| LCD Controller | Up to WXGA |
| Ethernet | 10/100 Mbps |
| USB | USB 2.0 + HSIC |
| Hardware Crypto | AES, Secure Boot, OTF |
| Supply Voltage I/O | 1.2V, 1.8V, 3.3V |
| Тип монтажа | Surface Mount |
| Статус RoHS | Compliant |
Руководство по цоколевке ATSAMA5D24A-CUR в корпусе 256-tfbga (8x8 mm)
Цоколевка для ATSAMA5D24A-CUR (корпус 256-tfbga (8x8 mm)). Эта цифровая ИС включает выводы GPIO, интерфейсы связи (UART, SPI, I2C) и выводы питания. Обратитесь к техническому описанию производителя для альтернативных функций выводов и вариантов конфигурации. Необходимо для проектирования встраиваемых систем и трассировки печатных плат.
Нет подробных данных о распиновке для ATSAMA5D24A-CUR.
Обратитесь к даташиту для полной конфигурации выводов.
Типичное применение
ATSAMA5D24A-CUR подходит для 6 применениеs: Industrial HMI Control Panels, Smart Energy Gateways, Medical Patient Monitors, Building Automation Controllers, Portable Barcode Scanners, Edge IoT Gateways.
Industrial HMI Control Panels
The ATSAMA5D24A-CUR fits industrial HMI panels because it combines a 500 MHz Cortex-A5 core with an integrated LCD controller supporting up to WXGA resolution and a 2D graphics accelerator. NEON MPE accelerates UI rendering, while the 128 KB internal SRAM handles touch event buffering and frame composition. The 5 uA backup current enables RTC retention across power cycles typical of factory-floor installations.
Рекомендуется
Smart Energy Gateways
The ATSAMA5D24A-CUR is well suited for smart energy gateways thanks to its 10/100 Ethernet MAC, USB 2.0 with HSIC, CAN-FD interface, and hardware AES/OTF crypto for secure protocol handling. The 500 MHz core runs Linux with MQTT or DLMS/COSEM stacks, while NEON accelerates TLS handshake computations. Industrial temperature grade (-40C to +85C) supports outdoor cabinet installations across climate zones.
Рекомендуется
Medical Patient Monitors
The ATSAMA5D24A-CUR serves medical patient monitors where 500 MHz Cortex-A5 performance runs Linux with vital-sign processing algorithms and a 2D GPU drives the bedside display. Hardware AES encryption secures patient health information (PHI) at rest and in transit. The integrated peripheral touch controller simplifies front-panel glass with capacitive buttons, reducing BOM cost for medical OEMs.
Рекомендуется
Building Automation Controllers
The ATSAMA5D24A-CUR excels in building automation controllers that aggregate BACnet, Modbus, and KNX traffic over its dual CAN-FD, UART, and Ethernet interfaces. The Cortex-A5 core runs Linux with automation stacks like openHAB or Home Assistant, while 5 uA backup current keeps RTC and scheduling data alive during brownouts. Industrial temperature grade covers rooftop and basement equipment locations.
Рекомендуется
Portable Barcode Scanners
The ATSAMA5D24A-CUR powers portable barcode scanners because its NEON MPE accelerates 1D/2D barcode decode algorithms (e.g., zxing) while the 2D GPU drives the scanner's preview display. USB 2.0 host mode supports Wi-Fi/Bluetooth dongles for warehouse network connectivity. The 5 uA backup mode extends shelf life between charges for handheld inventory terminals.
Рекомендуется
Edge IoT Gateways
The ATSAMA5D24A-CUR fits edge IoT gateways that aggregate sensor data from multiple fieldbuses (I2C, SPI, UART, CAN) and publish to cloud brokers via Ethernet or Wi-Fi. Hardware AES and secure boot satisfy IEC 62443 cybersecurity baselines for industrial IoT. The DDR3L/LPDDR3 memory controller supports large inference workloads for on-device anomaly detection at the network edge.
Рекомендуется
Сводка рекомендуемых товаров
Справочные инженерные данные для ATSAMA5D24A-CUR — сравнение, рекомендации по проектированию и информация о соответствии.
Руководство по выбору
Сравнение с аналогами
| Параметр | Этот товар | ATSAMA5D24A-CU | ATSAMA5D24B-CU | ATSAMA5D23A-CUR | ATSAMA5D22C-CU | ATSAMA5D21B-CU |
|---|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 256-TFBGA (8x8) | 256-TFBGA (8x8) - same | 256-TFBGA (8x8) - same | 256-TFBGA (8x8) - same | 256-TFBGA (8x8) - same | 256-TFBGA (8x8) - same |
| Core | ARM Cortex-A5 500 MHz | ARM Cortex-A5 500 MHz | ARM Cortex-A5 500 MHz | ARM Cortex-A5 500 MHz | ARM Cortex-A5 500 MHz | ARM Cortex-A5 500 MHz |
| Internal SRAM | 128 KB | 128 KB | 128 KB | 128 KB | 128 KB | 128 KB |
| LCD Controller | Yes (WXGA) | Yes (WXGA) | Yes (WXGA) | Yes (WXGA) | No | Yes (lower res) |
| Graphics Acceleration | 2D | 2D | 2D | 2D | 2D | No |
| CAN-FD | Yes | Yes | Yes | Yes | Yes | No |
| Operating Temperature | -40C to +85C | -40C to +85C | -40C to +85C | -40C to +85C | -40C to +85C | -40C to +85C |
Ключевые отличия
- Compact 8x8 mm BGA with full SAMA5D2 peripheral mix (против ATSAMA5D27-CUR)
- Industrial temperature grade with 5 uA backup mode (против ATSAMA5D23A-CUR)
- Built-in LCD controller up to WXGA (против ATSAMA5D22C-CU)
Заметки по проектированию
The 256-TFBGA package uses 0.4 mm ball pitch and requires at least a 4-layer HDI PCB with microvia-in-pad or laser-drilled microvia fanout for the inner rows. Allocate a continuous GND plane beneath the BGA and stitch vias on a 1 mm grid to suppress PDN impedance. Estimated: a 6-layer stack-up with 0.2 mm dielectric thickness is recommended for DDR3L signal integrity at 500 MHz.
Although the SAMA5D24 is designed for low-power operation, sustained 500 MHz Cortex-A5 workloads with NEON active can push junction temperature into the 85C ambient ceiling. Use thermal vias under the BGA thermal pad to spread heat into the inner GND/power planes. Estimated: at full load with 1.0 V core, the part dissipates approximately 0.5-0.8 W; a copper area of at least 1 square inch on the top layer is recommended.
The SAMA5D24 requires a simple power management scheme with separate 1.2 V (core), 1.8 V (DDR), and 3.3 V (I/O) rails. Decoupling requires 100 nF X7R on every power pin plus bulk 4.7 uF and 22 uF capacitors near the BGA. Estimated: budget approximately 0.5 W peak for the MPU and another 0.5-1 W for the DDR memory; size the DC-DC converters for at least 3 W continuous headroom.
Do not confuse the A and B silicon revisions: while both share the same 256-TFBGA footprint and 500 MHz Cortex-A5 core, the B revision incorporates errata fixes documented in the SAMA5D2 errata sheet. Always check the latest Microchip errata document before committing to PCB layout, and ensure your Linux4SAM BSP matches the silicon revision. Mixing revisions can cause subtle USB or DDR timing issues at production volumes.
Информация о соответствии
RoHS compliance per Microchip product page. Not AEC-Q100 qualified (industrial grade, not automotive). Halogen-free status not explicitly stated in available data.
