Microchip Technology

ATTINY26L-8MU - 8MHz AVR MCU with 2KB Flash | Microchip

Артикул: ATTINY26L-8MU ✓ Активен
2.7 V to 5.5 V Vdss 32-VQFN, 5 x 5 mm, exposed pad Package 8 MHz Speed 2 KB (1K x 16) Memory
MOQ: 1 |

ATTINY26L-8MU Обзор

The Microchip Technology ATTINY26L-8MU is an 8-bit AVR RISC microcontroller operating up to 8 MHz, with 2 KB of Flash program memory, 128 bytes of EEPROM, and 128 bytes of SRAM in a 32-VQFN 5 x 5 mm package. It operates across a 2.7 V to 5.5 V supply range and is specified from -40 °C to +85 °C.

An 8-bit microcontroller is a compact embedded-control device that executes firmware to monitor inputs, control outputs, and process data through timers, interrupts, serial interfaces, and analog peripherals. The ATtiny26 belongs to the TinyAVR family, combining a reduced instruction set computer core with Flash memory and mixed-signal peripherals in a small surface-mount package. This hierarchy places it within embedded processing, specifically low-cost, low-power AVR microcontrollers.

Key features include a maximum clock frequency of 8 MHz, 2 KB of Flash organized as 1K x 16, 128 bytes of EEPROM, and 128 bytes of internal SRAM. Peripherals include an ADC, I2C, SPI, an analog comparator, an 8/16-bit timer/counter with prescaler, an 8/10-bit high-speed timer/counter with PWM, a programmable watchdog timer, and pin-change interrupts on 11 pins. Low-power idle, noise-reduction, and power-down modes support battery-operated equipment.

The AVR enhanced RISC architecture supports single-clock-cycle instruction execution for many common operations, allowing the 8 MHz device to perform control tasks without a larger processor. Its small memory capacity favors compact firmware, while the exposed-pad VQFN construction supports compact PCB placement and thermal dissipation. Designers should use the pin-description table in the manufacturer datasheet when assigning tracks and connecting the exposed pad.

Typical uses include compact motor controllers, battery-powered sensors, LED lighting controls, fan controllers, simple security panels, and small industrial automation modules. The ATtiny26L's low-voltage range is particularly useful in 3.3 V systems where a 5 V-only MCU would not provide adequate operating margin.

When designing around the ATTINY26L-8MU, place the decoupling capacitor beside each applicable supply pin and preserve the exposed-pad land pattern. Confirm the regulator's startup behavior, output-voltage tolerance, and timing requirements with the firmware configuration. The 2 KB Flash limit also requires disciplined code sizing during toolchain selection and validation.

This page combines the manufacturer's ATtiny26 summary information with package details, application guidance, engineering notes, and a strict drop-in replacement assessment. It also highlights when the low-voltage ATtiny26L is preferable to a standard ATtiny26 and where firmware, qualification, or supply requirements should drive a different choice.

Аналоги без доработки для ATTINY26L-8MU — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.

ATTINY26-8MU

✅ Прямая замена ⚠️ Характеристики не проверены
📦 32-VQFN (5x5)
Clock rating remains 8 MHz, but supply range changes from 2.7-5.5 V to 4.5-5.5 V; lower-voltage operation is therefore lost.

📋 Справочный аналог (нет в каталоге)

ATTINY26L-8MU Максимальные параметры и электрические характеристики

Architecture 8-bit AVR enhanced RISC
Максимальная тактовая частота 8 MHz
Flash Program Memory 2 KB (1K x 16)
EEPROM Memory 128 bytes
Internal SRAM 128 bytes
Рабочее напряжение питания 2.7 V to 5.5 V
Диапазон рабочих температур -40 °C to +85 °C
Корпус 32-VQFN, 5 x 5 mm, exposed pad
Тип монтажа Surface mount
ADC Present
Serial Interfaces I2C and SPI
Analog Comparator Present
Timer/Counter 0 8/16-bit with prescaler
High-Speed Timer/Counter 1 8/10-bit with PWM
Programmable Watchdog Timer Present with separate on-chip oscillator
Pin-Change Interrupts 11 pins
Low-Power Modes Idle, noise-reduction, and power-down modes

Руководство по цоколевке ATTINY26L-8MU в корпусе 32-vqfn, 5 x 5 mm, exposed pad

Цоколевка для ATTINY26L-8MU (корпус 32-vqfn, 5 x 5 mm, exposed pad). Эта цифровая ИС включает выводы GPIO, интерфейсы связи (UART, SPI, I2C) и выводы питания. Обратитесь к техническому описанию производителя для альтернативных функций выводов и вариантов конфигурации. Необходимо для проектирования встраиваемых систем и трассировки печатных плат.

Схема цоколевки корпуса 32-vqfn, 5 x 5 mm, exposed pad для ATTINY26L-8MU

Нет подробных данных о распиновке для ATTINY26L-8MU.

Обратитесь к даташиту для полной конфигурации выводов.

Типичное применение

ATTINY26L-8MU подходит для 6 применениеs: Battery-Powered Sensor Nodes, Compact LED Lighting Control, Small Motor and Fan Controllers, IoT Remote Sensor Interface, Battery Charging Monitor, Compact Security and Access Panel.

🧩

Battery-Powered Sensor Nodes

The ATTINY26L-8MU fits compact battery-powered sensing because its supply range begins at 2.7 V and it supports idle, noise-reduction, and power-down modes. A 3.3 V regulated rail can power the controller without relying on the standard ATtiny26's 4.5 V minimum. Its 8 MHz AVR core is sufficient for sampling and conditioning sensor data, while I2C and SPI provide direct links to compatible sensors and transceivers. The 128-byte SRAM and 2 KB Flash require compact firmware, but they also reduce footprint and energy use. Firmware should activate a low-power mode between measurements and use the watchdog timer to recover from unexpected stalls.

💡

Compact LED Lighting Control

The ATTINY26L-8MU is appropriate for compact LED lighting control because its high-speed timer/counter provides PWM while the I2C interface can connect to a lighting controller or digital sensor. The 8 MHz operating speed supports responsive user input and lighting effects, and the 2.7 V to 5.5 V range permits low-voltage designs. Its 128 bytes of SRAM can hold a modest animation state, while EEPROM can retain brightness or configuration settings. Because the microcontroller has limited program memory, designers should avoid large animation tables and should time the PWM output against the intended LED driver rather than driving high current directly from an MCU pin.

🏭

Small Motor and Fan Controllers

The ATTINY26L-8MU can manage small motor or fan systems where adjustable drive, current monitoring, and compact control are required. Its two timer blocks provide timing and PWM resources, while the ADC and analog comparator can support feedback or protection signals. The 8 MHz clock gives deterministic timing for commutation, stall detection, and speed updates, and the 2.7 V minimum supply suits compact 3.3 V systems. The MCU should drive a transistor or dedicated power stage rather than the motor directly. Use local current limits and verify that the external power stage remains compatible with the startup and shutdown behavior required by the load.

🌐

IoT Remote Sensor Interface

The ATTINY26L-8MU works well as a low-resource interface between sensors and a network or gateway processor. I2C and SPI allow it to communicate with digital sensors and radio modules, while the ADC supports analog front-end readings and the 8 MHz core can format measurements for transmission. Its small 32-VQFN 5 x 5 mm package supports compact IoT hardware, and the 2.7 V to 5.5 V operating range accommodates low-voltage sensor systems. Firmware architecture must account for only 2 KB of Flash and 128 bytes of SRAM, so packet buffering and protocol processing should remain on the gateway whenever possible.

⚡

Battery Charging Monitor

The ATTINY26L-8MU can supervise a small battery-backed system by measuring voltage through the ADC and coordinating status information over I2C or SPI. Its low-voltage operation is useful near the discharge end of a 3.3 V battery rail, while the watchdog timer and low-power modes support unattended operation. The 8/16-bit timer/counter can provide periodic measurement timing, and EEPROM can retain configuration or calibration values. Firmware should define valid measurement windows, fault thresholds, and recovery behavior before the controller is connected to a charging circuit, particularly if an external charger can change the rail voltage quickly.

🔒

Compact Security and Access Panel

The ATTINY26L-8MU can manage a compact access-control or alarm panel that needs local input handling and short-range communication. Pin-change interrupts on 11 pins support responsive reactions to switches, contact sensors, or tamper inputs, while the ADC and analog comparator can monitor additional analog conditions. The 2 KB Flash is adequate for focused firmware rather than a large graphical interface, and EEPROM can store limited configuration data. The 32-VQFN footprint helps reduce board area in compact industrial enclosures. Security-sensitive designs should add suitable external protection and must not treat the device's limited memory and general-purpose peripherals as a substitute for a dedicated cryptographic security element.

Сводка рекомендуемых товаров

ATTINY26L-8MU Microchip Technology Используется в: Battery-Powered Sensor Nodes, Compact LED Lighting Control, Small Motor and Fan Controllers, IoT Remote Sensor Interface, Battery Charging Monitor, Compact Security and Access Panel ATTINY26L-8SC ATtiny26L family option for non-QFN PCB designs Используется в: Battery-Powered Sensor Nodes, IoT Remote Sensor Interface, Battery Charging Monitor, Compact Security and Access Panel ATTINY28L-4MU Related ATtiny family control option Используется в: Compact LED Lighting Control, Small Motor and Fan Controllers
What is the operating voltage of ATTINY26L-8MU?
The ATTINY26L-8MU operates from 2.7 V to 5.5 V, making it suitable for 3.3 V and 5 V embedded systems. According to the Microchip ATtiny26 Summary Datasheet, the ATtiny26L speed grade covers 0 to 8 MHz, while the standard ATtiny26 uses a 4.5 V to 5.5 V supply range. Designers should verify that the selected regulator remains within tolerance at the MCU's maximum operating frequency.
What are the key specifications of ATTINY26L-8MU that engineers should know?
The ATTINY26L-8MU combines an 8 MHz AVR core, 2 KB of Flash, 128 bytes of EEPROM, and 128 bytes of SRAM in a 32-VQFN 5 x 5 mm package. Its integrated resources include an ADC, I2C, SPI, analog comparator, two timer/counter blocks, PWM, watchdog timer, and multiple interrupt sources. The Microchip ATtiny26 Summary Datasheet identifies a 2.7 V to 5.5 V operating range for the ATtiny26L and an industrial temperature range of -40 °C to +85 °C.
Where can I download the ATTINY26L-8MU datasheet PDF?
The official ATTINY26L-8MU datasheet PDF is available from Microchip at the ATtiny26 Summary Datasheet link on this page. The document contains the ATtiny26L supply range, speed grades, memory organization, timers, serial interfaces, analog peripherals, power modes, and package information. Use the pin-description table and package drawings in that document when assigning PCB signals and designing the exposed-pad connection.
Where can I find the ATTINY26L pinout?
The ATTINY26L pinout is documented in the pin-description section of the Microchip ATtiny26 Summary Datasheet. The ATTINY26L-8MU uses a 32-VQFN 5 x 5 mm package with an exposed pad, while other family members use different package options. Use the datasheet table associated with the exact package rather than relying on a generic 20-pin drawing, because package construction and exposed-pad connectivity must match the selected ordering code.
What can replace ATTINY26L-8MU?
The closest drop-in candidate is ATTINY26-8MU from the same ATtiny26 family, but it is not a full functional substitute for every 3.3 V design because its supply range starts at 4.5 V. Other catalog suffixes use different packages, higher clock speeds, or different voltage ranges and therefore are not drop-in replacements for the ATTINY26L-8MU. Firmware, supply voltage, package, exposed pad, and qualification requirements must all be reviewed before substitution.
Is ATTINY26L-8MU the same as ATTINY26L-8SC?
No, ATTINY26L-8SC is not a same-footprint replacement for ATTINY26L-8MU. The -8SC ordering code is associated with a different package option, while ATTINY26L-8MU is specified in a 32-VQFN 5 x 5 mm package. Although both devices are based on the ATtiny26L family, changing package suffixes requires a PCB redesign and careful verification of every signal and power connection.
ATTINY26L-8MU vs ATTINY26-8MU: which is better for a 3.3 V application?
The ATTINY26L-8MU is the better choice for a 3.3 V application because its specified operating range extends down to 2.7 V. The ATTINY26-8MU retains the 8 MHz clock rating but uses the standard ATtiny26 supply range beginning at 4.5 V. According to the Microchip ATtiny26 Summary Datasheet, the L designation is the low-voltage option, so the two parts are not interchangeable in a true 3.3 V rail design.
When should I choose ATTINY26L-8MU over ATTINY26-8MU?
Choose ATTINY26L-8MU when the design operates below 4.5 V, particularly on a regulated 3.3 V rail, and the installed PCB requires the 32-VQFN 5 x 5 mm footprint. Its 2.7 V to 5.5 V range provides operating margin for 3.3 V systems. Choose ATTINY26-8MU only when the board supply is safely within 4.5 V to 5.5 V and its supply range, availability, and qualification fit the production program.
Is ATTINY26L-8MU suitable for battery-powered sensor nodes?
The ATTINY26L-8MU is suitable for compact battery-powered sensor nodes that require low-voltage operation and modest processing capacity. Its 2.7 V minimum supply voltage supports 3.3 V designs, while idle, noise-reduction, and power-down modes can reduce energy consumption between measurements. The 2 KB Flash and 128 bytes of SRAM require a compact firmware strategy, so confirm that the application code, serial protocol, and update requirements fit the available memory.
How much memory does the ATTINY26L-8MU have?
The ATTINY26L-8MU provides 2 KB of Flash program memory, 128 bytes of EEPROM, and 128 bytes of internal SRAM. The manufacturer identifies the Flash organization as 1K x 16, while cross-reference listings describe the device as an 8-bit MCU with 2 KB Flash, 128-byte EEPROM, and 128-byte SRAM. EEPROM is useful for persistent settings, but the SRAM is the main working-memory budget for application firmware.
Does ATTINY26L-8MU support I2C, SPI, PWM, and an ADC?
Yes, the ATTINY26L-8MU includes I2C, SPI, an ADC, an analog comparator, and timer-based PWM. The Microchip ATtiny26 Summary Datasheet identifies an 8/16-bit timer/counter with prescaler and an 8/10-bit high-speed timer/counter with PWM. These resources allow the MCU to interface with sensors, communicate with a host controller, control LED or motor outputs, and monitor analog signals without requiring separate interface ICs.
What are the thermal considerations for the 32-VQFN ATTINY26L-8MU?
Route the 32-VQFN exposed pad to a properly designed ground plane and use the manufacturer's package guidance for thermal pad connection. Although an MCU dissipates less power than many analog regulators, switching activities, supply voltage, clock rate, and ambient temperature still affect junction temperature. Use the package drawing and electrical characteristics in the Microchip ATtiny26 Summary Datasheet to confirm pad geometry and thermal assumptions before release.
How do I request a quote for ATTINY26L-8MU?
Use the Request a Quote form on this page to request current ATTINY26L-8MU pricing, stock confirmation, minimum order quantity, and lead time. The form allows the request to be matched to the exact 32-VQFN ordering code without confusing it with another ATtiny26 package suffix. When submitting the request, include the required quantity, target date, and any programming, traceability, or delivery requirements.
What is the lead time and stock status for ATTINY26L-8MU?
Current lead time and stock status should be confirmed through the Request a Quote form on this page. Manufacturer and distributor availability can change independently of a device's active lifecycle status, particularly for older ATtiny26 variants. Include the exact ATTINY26L-8MU part number and requested quantity so procurement can confirm the 32-VQFN package, exposed-pad configuration, and production schedule.
Is ATTINY26L-8MU RoHS compliant and AEC-Q100 qualified?
The RoHS, REACH, and AEC-Q100 status of ATTINY26L-8MU must be confirmed from the current manufacturer product documentation or its declaration records. The manufacturer product page identifies the ATtiny26 as an active product family, but product-family status alone does not establish that every package suffix is qualified for automotive use. Use the Request a Quote form for lot-level traceability and compliance-document requirements.

Справочные инженерные данные для ATTINY26L-8MU — сравнение, рекомендации по проектированию и информация о соответствии.

Руководство по выбору

Choose the ATTINY26L-8MU for compact 3.3 V embedded designs that need an 8 MHz AVR controller, 2 KB Flash, serial interfaces, timers, PWM, and analog conversion. Its 2.7 V minimum supply voltage is the decisive feature when the system cannot guarantee 4.5 V at the MCU. The ATTINY26-8MU is the only close same-family candidate identified for its matching 32-VQFN format, but it requires a 4.5 V to 5.5 V supply and is therefore unsuitable as a substitute for a genuine 3.3 V rail. Other ATtiny26 order codes may differ in package, temperature grade, voltage range, or clock speed and should not be treated as drop-in replacements without a complete footprint, firmware, and qualification review. For a new 3.3 V design, retain the low-voltage device; for a 5 V legacy board, confirm the alternate part's current ordering, package, and documentation before substitution.

Сравнение с аналогами

Параметр Этот товар ATTINY26-8MU
Brand Microchip Technology Microchip Technology
Package 32-VQFN (5x5) 32-VQFN (5x5)
Maximum Clock Frequency 8 MHz 8 MHz
Operating Supply Voltage 2.7 V to 5.5 V 4.5 V to 5.5 V
Flash Memory 2 KB (1K x 16) 2 KB (1K x 16)
EEPROM 128 bytes 128 bytes
Internal SRAM 128 bytes 128 bytes
Operating Temperature Range -40 °C to +85 °C -40 °C to +85 °C
Low-Voltage Operation Supported from 2.7 V Not supported below 4.5 V
Key Peripherals ADC, I2C, SPI, comparator, timers, PWM, watchdog ADC, I2C, SPI, comparator, timers, PWM, watchdog

Ключевые отличия

  • Lower minimum operating voltage (против ATTINY26-8MU)
  • Same 8 MHz clock capability (против ATTINY26-8MU)
  • Compact exposed-pad package (против ATTINY26-8MU)

Заметки по проектированию

Use the package drawing in the Microchip ATtiny26 Summary Datasheet to define the 32-VQFN 5 x 5 mm land pattern and exposed-pad connection. Place the device-side input and output decoupling capacitors close to their corresponding supply pins, with short return paths to the ground plane. Do not substitute a generic 32-pin QFN footprint without checking pad dimensions, exposed-pad size, pin numbering, and solder-mask clearance.

Design the supply for the ATtiny26L's full 2.7 V to 5.5 V range, including startup, transient response, and the maximum 8 MHz operating condition. Keep the regulator's permitted minimum output above 2.7 V after tolerance and voltage drop are considered. A 3.3 V rail is appropriate, but the MCU and any connected peripherals must also tolerate the selected rail. Verify brownout and power-down behavior in firmware rather than assuming a reset always preserves the intended operating state.

Keep the exposed pad and surrounding ground plane electrically continuous while respecting the manufacturer's thermal-via recommendations. Separate noisy switching-node copper from ADC, comparator, and oscillator-related routing where practical. I2C and SPI traces should be short and have compatible pull-up arrangements, and unused inputs should be tied to a defined level. Review the final layout against the package drawing and the pin table for the exact ordering suffix.

The most consequential substitution error is confusing the low-voltage ATtiny26L with the standard ATtiny26. ATTINY26L-8MU supports 2.7 V to 5.5 V, whereas the standard family device is specified from 4.5 V to 5.5 V. A second common error is changing package suffixes without redesigning the PCB. Also account for the 2 KB Flash and 128-byte SRAM limits before committing to a larger application framework or communication protocol.

Информация о соответствии

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Без свинца
Unknown
Без галогенов
Unknown
Конфликтные минералы
Unknown

The manufacturer product and summary-datasheet information does not establish a specific compliance declaration for the ATTINY26L-8MU ordering code. Request current RoHS, REACH, lead-free, halogen-free, conflict-minerals, and automotive qualification documentation through the Request a Quote form.

Данные проверены: 2026-11-19 — данные проверены и курируются командой компонентной инженерии XAIPART

Похожие запросы

attiny26l pinout attiny26l datasheet attiny26l 8pu datasheet atmel attiny26l ATTINY26L-8MU datasheet pdf ATTINY26L-8MU pinout ATTINY26L-8MU specifications ATTINY26L-8MU 8MHz 2KB Flash ATTINY26L-8MU VQFN-32 ATTINY26L-8MU equivalent ATTINY26L-8MU replacement ATTINY26L-8MU vs ATTINY26-8MU ATTINY26L-8MU application circuit Microchip ATTINY26L-8MU

Связанные компоненты & термины

Microchip Technology Atmel ATTINY26L-8MU ATTINY26-8MU ATTINY26L-8SC ATTINY28L-4MU ATtiny26 ATtiny26L TinyAVR 8-bit microcontroller AVR enhanced RISC architecture embedded microcontroller Flash memory EEPROM SRAM 32-VQFN QFN family surface-mount package exposed pad ADC I2C SPI PWM analog comparator programmable watchdog timer 3.3 V embedded control
Быстрый запрос цены (RFQ)
Заполните все данные — наша команда продаж ответит в течение 24 часов
Артикул Производитель Корпус QTY Целевая цена Итого
✓
Запрос цены отправлен!

Мы ответим на ваш email в течение 24 часов

1
RFQ отправлен
2
Предложение получено
3
Заказ оформлен
4
Оплата
5
Отправлено
6
Доставлено
Просмотреть детали RFQ