Microchip Technology

ATTINY861A-MU - 8-Bit 20MHz AVR MCU | Microchip Technology

Артикул: ATTINY861A-MU ✓ Активен
32-VQFN, 5 x 5 mm Package 20 MHz Speed 8 KB (4K x 16) Memory
MOQ: 1 |

ATTINY861A-MU Обзор

The Microchip Technology ATTINY861A-MU is an 8-bit AVR reduced-instruction-computing microcontroller operating at up to 20 MHz, with 8 KB of in-system programmable Flash memory and a 32-VQFN surface-mount package measuring 5 x 5 mm. It includes 16 general-purpose I/O lines, 32 working registers, 512 bytes of EEPROM, and 512 bytes of SRAM for compact embedded control.

An 8-bit AVR microcontroller is a compact embedded-processing semiconductor designed to execute control logic efficiently on a single die. The AVR architecture integrates Flash program memory, data EEPROM, SRAM, general-purpose I/O, timers, and communication peripherals into a low-power device. Within the ATtiny product family, the ATTINY861A occupies the middle of the range, combining 8 KB of program storage with a 20 MHz maximum clock rate.

Key features include 8 KB of in-system programmable Flash, 512 bytes of EEPROM, 512 bytes of SRAM, 16 general-purpose I/O lines, and 32 general-purpose working registers. The device also provides an 8-bit timer/counter with compare modes, allowing edge- and pulse-width-related measurements without requiring a separate timer IC. Its compact 32-VQFN package supports dense PCB layouts in consumer, industrial, and IoT control products.

The ATTINY861A-MU uses the Microchip AVR enhanced RISC architecture and is intended for low-power embedded designs where deterministic control, compact code storage, and flexible I/O are more important than high compute throughput. Its 20 MHz operating speed provides adequate timing margin for motor and timer-based control, while the 512-byte SRAM supports modest working memory requirements.

Typical uses include motor-control and fan-speed feedback loops, LED and lighting sequencing, industrial sensing interfaces, small appliance controls, smart-home nodes, and compact metering products. The timer/counter and 16 I/O lines make it particularly suitable for designs combining several digital inputs, pulse outputs, and status indicators in a small board area.

PCB design should preserve access to all power, ground, programming, clock, and I/O lands while keeping switching-current paths compact. Because the package is only 5 x 5 mm, assembly capability, exposed-pad treatment, land pattern tolerances, and soldering-profile control should be reviewed before production release.

This page combines manufacturer specifications, application-focused engineering guidance, package considerations, and drop-in replacement analysis to support faster component selection and PCB implementation. It also identifies where firmware, peripheral, and qualification review remains necessary before treating a substitute as a production equivalent.

Аналоги без доработки для ATTINY861A-MU — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.

Варианты в этой серии

Модели той же серии, совместимые без доработки с ATTINY861A-MU (тот же форм-фактор и посадочное место) — отличается по Package, Architecture, SRAM, Flash Memory, Product Type.

Microchip Technology
Package: 32-VQFN (5x5 mm) with exposed pad
Сравнить с ATTINY861A-MU →
Microchip Technology
Package: 32-QFN, 5 x 5 mm
Architecture: AVR with picoPower technology
SRAM: 128 bytes
Сравнить с ATTINY861A-MU →
Microchip Technology
Package: 32-VQFN (5 x 5 mm)
Architecture: 8-bit AVR RISC
SRAM: 256 B
Сравнить с ATTINY861A-MU →
Microchip Technology
Package: 32-pin VQFN, 5 mm x 5 mm
Architecture: AVR 8-bit RISC
SRAM: 512 B
Сравнить с ATTINY861A-MU →

ATTINY87-MUR

✅ Прямая замена
Microchip Technology
📦 32-VQFN
8-bit AVR RISC-based microcontroller · AVR 8-bit RISC · 16 MHz · 8 KB Flash, 4K x 16 · 512 B · 512 B · 16 · 32

Уточнить цену

Открыть даташит →

ATMEGA88A-MU

✅ Прямая замена
Microchip Technology
📦 32-VQFN
8-bit AVR RISC · 8 KB (4K x 16) Flash · 512 B · 1 KB · 20 MHz · 1.8 V to 5.5 V · 23 I/O lines · 32 x 8-bit

Уточнить цену

Открыть даташит →

ATTINY861A-MU Максимальные параметры и электрические характеристики

Product Type 8-bit AVR RISC microcontroller
Maximum CPU Frequency 20 MHz
Flash Memory 8 KB (4K x 16)
EEPROM Memory 512 bytes
SRAM 512 bytes
General-Purpose I/O Lines 16
General-Purpose Working Registers 32
Timer/Counter 8-bit with compare modes
Architecture AVR enhanced RISC
Program Memory Type In-system programmable Flash
Корпус 32-VQFN, 5 x 5 mm
Тип монтажа Surface mount
RoHS Compliance unknown
REACH Compliance unknown
AEC-Q100 Qualification not_applicable

Руководство по цоколевке ATTINY861A-MU в корпусе 32-vqfn, 5 x 5 mm

Цоколевка для ATTINY861A-MU (корпус 32-vqfn, 5 x 5 mm). Эта цифровая ИС включает выводы GPIO, интерфейсы связи (UART, SPI, I2C) и выводы питания. Обратитесь к техническому описанию производителя для альтернативных функций выводов и вариантов конфигурации. Необходимо для проектирования встраиваемых систем и трассировки печатных плат.

Схема цоколевки корпуса 32-vqfn, 5 x 5 mm для ATTINY861A-MU

Нет подробных данных о распиновке для ATTINY861A-MU.

Обратитесь к даташиту для полной конфигурации выводов.

Типичное применение

ATTINY861A-MU подходит для 6 применениеs: Motor and Fan Speed Control, Industrial Sensing Interface, Smart Home Sensor Node, LED Lighting and Sequencing, Small Appliance Controller, Compact Metering Product.

🏭

Motor and Fan Speed Control

The ATTINY861A-MU fits compact motor and fan controllers where an 8-bit timer/counter, 16 general-purpose I/O lines, and 20 MHz processing speed provide adequate control bandwidth without a larger microcontroller. The timer can measure edges or compare pulse widths while the I/O lines operate switches, sensors, and status indicators. The 8 KB Flash stores the control firmware, and 512 bytes of SRAM supports modest run-time state. Designers should confirm the exact PWM and timer resource assigned to the selected pins, provide suitable drive circuitry for the motor, and validate startup, stall, and overcurrent behavior before connecting a load.

🏭

Industrial Sensing Interface

ATTINY861A-MU is appropriate for compact industrial sensing interfaces that combine digital inputs, timing functions, and local status reporting. Its 16 general-purpose I/O lines can accommodate switches, discrete sensors, and control outputs, while the 8-bit timer/counter assists with pulse and edge measurements. The 512-byte EEPROM is suitable for calibration or configuration storage, and 8 KB of Flash allows firmware to be reprogrammed in-system. In a deployed system, the controller should be reviewed for input filtering, electrical isolation, ESD protection, grounding, and fail-safe output states, since the microcontroller does not replace the required protection and signal-conditioning circuitry.

🧩

Smart Home Sensor Node

The ATTINY861A-MU can serve as the local controller in a compact smart-home sensor node that monitors switches or digital sensors and drives an indicator or other simple actuator. Its 16 I/O lines provide a practical interface budget, while 8 KB of Flash and 512 bytes of SRAM are sufficient for lightweight event handling and communication support when the communication stack is modest. The 20 MHz clock provides additional timing margin for protocol and debounce routines. Power-budget calculations should include the MCU operating mode, pull-up networks, radio or bus circuitry, and sensor loads. Low-power operation also requires deliberate sleep-mode entry and peripheral shutdown rather than relying on the MCU specification alone.

💡

LED Lighting and Sequencing

ATTINY861A-MU is a practical controller for compact LED lighting modules, status indicators, and decorative sequencing systems that require multiple outputs and predictable timing. Its 16 general-purpose I/O lines can drive LED control stages or logic inputs to external drivers, while the 8-bit timer/counter supports timing-related functions. The microcontroller's 8 KB Flash capacity accommodates a dedicated lighting pattern, and the small 5 x 5 mm 32-VQFN package keeps the controller footprint small. Current limiting and transistor or driver selection remain external design responsibilities. Validate thermal performance of the LED stage, provide adequate decoupling, and keep sensitive analog or timing circuits away from high-current switching paths.

⚡

Small Appliance Controller

ATTINY861A-MU suits small appliance controllers that coordinate buttons, indicators, timers, and simple actuators within a compact board area. The 8-bit AVR core, 8 KB of in-system programmable Flash, and 512 bytes of SRAM are well matched to deterministic embedded-control tasks, while 16 I/O lines support several user inputs and outputs. The timer/counter can assist with elapsed-time measurement or input pulse detection. Production design should address mains isolation, high-voltage switchgear, surge events, brownout behavior, and separation between hazardous and accessible circuitry. Firmware should include safe-state behavior for restart, watchdog expiry, and invalid sensor readings rather than assuming uninterrupted power.

🔧

Compact Metering Product

ATTINY861A-MU can support a compact metering product that counts pulses, records operating states, and presents local status through indicators or a serial interface. Its timer/counter supports periodic or pulse-related measurement, 512 bytes of EEPROM can retain configuration values, and 8 KB of Flash accommodates a focused metering algorithm. The 32-VQFN package reduces PCB area compared with larger leaded or higher-pin-count devices. Accuracy still depends on the sensing front end, reference components, input filtering, and calibration method. Developers should verify timer tolerance, interrupt latency, data-retention expectations, and the behavior of the external sensor when power is interrupted or reset.

Сводка рекомендуемых товаров

ATMEGA88A-MU Microchip Technology Используется в: Motor and Fan Speed Control, Industrial Sensing Interface, Smart Home Sensor Node, LED Lighting and Sequencing, Small Appliance Controller, Compact Metering Product ATtiny87-MUR Related 20 MHz AVR control alternative Используется в: Motor and Fan Speed Control, LED Lighting and Sequencing, Small Appliance Controller ATtiny44A-MUR Related low-power AVR sensing controller Используется в: Industrial Sensing Interface, Smart Home Sensor Node, Compact Metering Product
What are the key specifications of ATTINY861A-MU that engineers should know?
The ATTINY861A-MU is an 8-bit AVR microcontroller with a maximum clock frequency of 20 MHz, 8 KB of in-system programmable Flash, 512 bytes of EEPROM, 512 bytes of SRAM, and 16 general-purpose I/O lines. It is supplied in a 32-VQFN package measuring 5 x 5 mm. According to the Microchip ATtiny861A product page, the device also provides 32 working registers and an 8-bit timer/counter with compare modes.
Where can I download the ATTINY861A-MU datasheet PDF?
The official ATTINY861A-MU documentation is available through the Microchip ATtiny861A product page, which links to the manufacturer datasheet and supporting documents. The exact ATTINY861A-MU ordering information is also identified by DigiKey and Mouser. Use the manufacturer document for authoritative pin assignments, electrical limits, programming information, and package drawings.
Where can I find the ATTINY861A pinout?
The ATTINY861A pinout is documented in the Microchip ATtiny861A manufacturer datasheet, including its 32-VQFN land pattern, signal names, exposed-pad requirements, and pin-numbering diagram. The ATTINY861A-MU uses that device family in a 5 x 5 mm surface-mount package. Use the pin-description table in the manufacturer datasheet when assigning PCB tracks and programming firmware.
What is ATTINY861A-MU used for?
ATTINY861A-MU is used for compact embedded control tasks such as motor feedback, fan-speed control, LED sequencing, sensing interfaces, appliance controls, and smart-home nodes. Its 8-bit timer/counter with compare modes supports timing and pulse-related functions, while 16 general-purpose I/O lines provide connections for switches, sensors, indicators, and actuators. Its 8 KB Flash and 512-byte SRAM suit moderate control workloads.
Is ATTINY861A-MU the same as ATTINY861A-MUR?
ATTINY861A-MUR denotes a tape-and-reel ordering form of the same Microchip ATTINY861A device family, while ATTINY861A-MU is the specified ordering code. Both listings identify a 32-pin surface-mount AVR device with 8 KB Flash, 512-byte EEPROM, 512-byte SRAM, and a 20 MHz maximum clock rate. Confirm the manufacturer ordering-information table before substituting one packing suffix for another.
Can ATtiny87-MUR replace ATTINY861A-MU?
ATtiny87-MUR is a same-manufacturer AVR candidate with 8 KB Flash and a 32-VQFN package, making it the closest documented alternative to ATTINY861A-MU. Its 20 MHz maximum clock rate also matches the target. Pin assignments and peripheral resources should still be checked against the Microchip datasheets, and existing firmware must be recompiled and functionally validated before production use.
Can ATMEGA88A-MU replace ATTINY861A-MU?
ATMEGA88A-MU is a same-manufacturer 8-bit AVR alternative with 8 KB Flash, 20 MHz operation, and a 32-VQFN package, making it a strong architectural match for ATTINY861A-MU. It provides additional memory in some internal resources, but register definitions, peripheral configurations, and interrupt behavior can differ. Treat it as a board-compatible design alternative rather than a firmware-transparent replacement.
When should I choose ATTINY861A-MU over ATMEGA88A-MU?
Choose ATTINY861A-MU when the design specifically targets the ATtiny861A pin arrangement and peripheral configuration, or when an existing ATtiny861A firmware and PCB design already match it. Choose ATMEGA88A-MU when its additional resources and register architecture are useful and the firmware will be adapted. Both parts provide 8 KB Flash, 20 MHz operation, and a 32-VQFN footprint, but they are not interchangeable without validation.
When should I choose ATTINY861A-MU over ATtiny87-MUR?
Choose ATTINY861A-MU when the exact ATtiny861A peripheral set and validated firmware are required. Choose ATtiny87-MUR when its 8 KB Flash, 20 MHz operation, and 32-VQFN arrangement satisfy the design while offering a useful same-family alternative. Because the ATtiny87 has a different device identity, compare pin multiplexing, timers, analog functions, interrupt vectors, and programming-fuse behavior before changing the BOM.
What is the best drop-in replacement for ATTINY861A-MU?
ATtiny87-MUR is the best documented same-manufacturer drop-in candidate because it combines 8 KB Flash, 20 MHz operation, and a 32-VQFN package with the ATTINY861A-MU. ATMEGA88A-MU is another compatible-footprint alternative with similar core resources. No cross-brand equivalent was established, and an exact drop-in substitution still requires pin, peripheral, fuse, timing, and firmware validation.
What can replace ATTINY861A-MU on the same PCB footprint?
ATtiny87-MUR and ATMEGA88A-MU are documented footprint-compatible candidates for the ATTINY861A-MU because both use a 32-VQFN package and provide 8 KB Flash with 20 MHz operation. They should not be treated as automatic functional replacements. Verify exposed-pad handling, power pins, peripheral pins, startup behavior, programming interfaces, and application firmware before release.
Where can I buy ATTINY861A-MU online?
Use the Request a Quote form on this page to request current ATTINY861A-MU availability, volume pricing, and lead time for the exact 32-VQFN ordering code. The form avoids stale commercial information and lets you specify quantity, reel format, target date, and shipment requirements. Confirm that any quotation identifies ATTINY861A-MU exactly rather than the broader ATtiny861A family.
What is the price of ATTINY861A-MU?
Current ATTINY861A-MU commercial terms are handled through the Request a Quote form on this page. Enter the required quantity and packaging requirements to obtain a current unit and volume-price response tied to the exact ATTINY861A-MU part number. The form is the appropriate route for price confirmation because component pricing and inventory can change frequently.
What is the lead time and stock status for ATTINY861A-MU?
Request current ATTINY861A-MU stock and lead time through the Request a Quote form on this page. Include your required quantity, reel quantity, production date, and shipping destination so the response can reflect the actual procurement request. Confirm the exact ordering code and package suffix when the quotation is issued.
Does ATTINY861A-MU support low-power embedded and Arduino-style designs?
ATTINY861A-MU is suitable for low-power embedded designs because it combines 8 KB of Flash, 512 bytes of EEPROM, 512 bytes of SRAM, and an 8-bit timer/counter in a compact 32-VQFN package. Arduino-style or custom bootloader workflows depend on the selected programmer, boot-loader support, fuse settings, and board layout. The manufacturer ATtiny861A documentation should govern clock, programming, and brownout configuration.
Is there a direct cross-brand equivalent for ATTINY861A-MU?
No directly verified cross-brand equivalent is established for ATTINY861A-MU. The documented candidates are Microchip AVR devices that preserve the 8 KB Flash, 20 MHz operation, and 32-VQFN package characteristics. A competitor device with a similar data rate or pin count is not necessarily software- or pin-compatible, so any cross-brand proposal should be validated against the complete electrical and peripheral requirements.

Справочные инженерные данные для ATTINY861A-MU — сравнение, рекомендации по проектированию и информация о соответствии.

Руководство по выбору

Choose ATTINY861A-MU when an established design depends on the exact ATtiny861A register set, timer behavior, and validated firmware. Its 8 KB Flash, 512-byte EEPROM, 512-byte SRAM, 16 I/O lines, and 20 MHz clock provide a capable platform for compact control, sensing, metering, and sequencing products. Choose ATtiny87-MUR when its same-family peripheral configuration offers a useful alternative while preserving the principal memory, speed, and package characteristics. Choose ATMEGA88A-MU when the design benefits from that device family and firmware can be adapted to its register map. Neither candidate should be treated as a transparent substitute: verify exposed-pad geometry, power and ground pins, peripheral multiplexing, programming signals, fuse settings, and timing. For new production designs, validate the exact ordering suffix, package drawings, assembly process, and programming fixture before releasing the PCB.

Сравнение с аналогами

Параметр Этот товар ATtiny87-MUR ATMEGA88A-MU
Package 32-VQFN, 5 x 5 mm 32-VQFN 32-VQFN
Brand Microchip Technology Microchip Technology Microchip Technology
Architecture 8-bit AVR enhanced RISC 8-bit AVR 8-bit AVR
Maximum CPU Frequency 20 MHz 20 MHz 20 MHz
Flash Memory 8 KB 8 KB 8 KB
SRAM 512 bytes 512 bytes 512 bytes
Mounting Type Surface mount Surface mount Surface mount
Programming and Peripheral Compatibility ATtiny861A device behavior Requires peripheral and firmware validation Requires register-map and firmware validation

Ключевые отличия

  • Exact ATtiny861A device identity (против ATtiny87-MUR)
  • Compact 20 MHz AVR implementation (против ATMEGA88A-MU)
  • Purpose-built timer and control interface (против ATtiny87-MUR)

Заметки по проектированию

Use the Microchip ATtiny861A package drawing and land-pattern guidance when creating the PCB footprint for the 5 x 5 mm 32-VQFN package. Confirm pad dimensions, exposed-pad geometry, solder-mask clearance, and the manufacturer recommendation for thermal-via placement. Check pin-1 orientation against the centroid marker and keep programming-test pads accessible for production programming and inspection.

Place the decoupling network at the device power pins and connect it with short, low-impedance traces. Follow the voltage and capacitor recommendations in the manufacturer datasheet rather than estimating values from adjacent designs. Account for voltage-dependent current, startup behavior, and external load transients when designing the supply. If the same rail drives motors, relays, or LEDs, use separation and filtering so their switching transients do not couple into the microcontroller supply path.

Treat every assigned I/O pin as a design decision rather than an interchangeable resource. Review the pin-multiplexing table for timer, programming, communication, and reset functions, and avoid placing timing-sensitive signals next to switching nodes. Maintain a continuous ground reference, use appropriate series resistance for exposed signal lines when required, and validate reset, clock, and programming signals at the assembled-board level.

Do not assume that two 32-VQFN AVR devices with 8 KB Flash are firmware-compatible. Before substituting ATtiny87-MUR or ATMEGA88A-MU, compare pin multiplexing, peripheral registers, interrupt vectors, timer channels, analog functions, fuse definitions, and clock behavior. Rebuild and test the firmware, then verify cold start, reset, brownout, watchdog, programming, and worst-case I/O timing on the revised board.

Информация о соответствии

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Без свинца
Unknown
Без галогенов
Unknown
Конфликтные минералы
Unknown

The Microchip product page identifies the ATtiny861A device family, but specific environmental and material-compliance declarations for ATTINY861A-MU require confirmation from the manufacturer product documentation or declaration.

Данные проверены: 2026-11-14 — данные проверены и курируются командой компонентной инженерии XAIPART

Похожие запросы

attiny861a datasheet attiny861a pinout attiny861a microcontroller attiny861a arduino microcontrolador attiny861a ATTINY861A-MU datasheet PDF ATTINY861A-MU 32 VQFN pinout ATTINY861A-MU 20MHz specifications ATTINY861A-MU vs ATtiny87-MUR ATTINY861A-MU replacement ATTINY861A-MU application circuit ATTINY861A-MU price

Связанные компоненты & термины

Microchip Technology ATTINY861A-MU ATTINY861A ATtiny87-MUR ATMEGA88A-MU ATtiny44A-MUR AVR enhanced RISC architecture 8-bit microcontroller embedded microcontroller semiconductor in-system programmable Flash EEPROM SRAM general-purpose I/O timer/counter compare mode 20 MHz clock 32-VQFN QFN family surface-mount package 5 x 5 mm package motor control industrial sensing smart-home sensor node LED sequencing
Быстрый запрос цены (RFQ)
Заполните все данные — наша команда продаж ответит в течение 24 часов
Артикул Производитель Корпус QTY Целевая цена Итого
✓
Запрос цены отправлен!

Мы ответим на ваш email в течение 24 часов

1
RFQ отправлен
2
Предложение получено
3
Заказ оформлен
4
Оплата
5
Отправлено
6
Доставлено
Просмотреть детали RFQ