ATXMEGA128D3-MH - 32MHz 128KB AVR MCU | Microchip Technology
Артикул: ATXMEGA128D3-MH ✓ АктивенATXMEGA128D3-MH Обзор
An 8-/16-bit MCU is a microcontroller whose AVR enhanced RISC core provides a compact instruction set for embedded control. The ATXMEGA128D3 belongs to the XMEGA D3 family within the broader AVR microcontroller and semiconductor hierarchy. It is intended for applications that need more memory and peripherals than a basic 8-bit AVR while retaining a simple, low-power embedded architecture.
Its principal resources include 128 KB of ISP Flash organized as 64K x 16, including an 8 KB boot-code section with read-while-write capability. The device also provides 2 KB of EEPROM and 8 KB of SRAM. Four-channel event-system hardware, 50 GPIO lines, a 16-bit real-time counter, and five flexible 16-bit timer/counters support deterministic peripheral timing and reduce reliance on software polling.
The 64-QFN package integrates a high-performance, low-power CMOS AVR microcontroller with extensive communication and timing peripherals. A programmable multi-level interrupt controller organizes events across the architecture, while the event system can connect timer, comparator, and other peripheral signals internally. This hardware event routing is useful when several timing-sensitive functions must operate without excessive interrupt-service overhead.
Typical uses include industrial control modules, data-acquisition equipment, communications controllers, low-power embedded instruments, and compact automation products. The 50 GPIO lines suit multi-channel sensing or discrete I/O, while the five timer/counters can generate timing references and PWM outputs. The 128 KB Flash capacity also allows larger application code, boot code, and protocol handling within a single device.
PCB design should preserve the exposed-pad and thermal requirements of the 64-QFN package while routing sensitive analog, clock, and communication signals according to the manufacturer datasheet. Firmware and fuse compatibility must also be checked against the exact ordering code because XMEGA family members can differ in peripheral availability, memory organization, or qualification.
This page combines the manufacturer resource summary, package details, strict same-package alternatives, application guidance, and a parameter comparison to simplify initial component screening. Confirm electrical limits, pin assignments, boot behavior, and programming requirements in the Microchip datasheet before releasing a PCB or production design.
Аналоги без доработки для ATXMEGA128D3-MH — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.
Варианты в этой серии
Модели той же серии, совместимые без доработки с ATXMEGA128D3-MH (тот же форм-фактор и посадочное место) — отличается по Package, SRAM, ADC, Boot Code Section, DAC.
ATXMEGA128D3-MNR
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
ATXMEGA128D4-MH
✅ Прямая замена ⚠️ Характеристики не провереныУточнить цену
Открыть даташит →ATXMEGA128B3-MH
✅ Прямая замена ⚠️ Характеристики не проверены📋 Справочный аналог (нет в каталоге)
ATXMEGA128A3U-MH
✅ Прямая замена ⚠️ Характеристики не проверены📋 Справочный аналог (нет в каталоге)
ATXMEGA128A3U-AU
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
ATXMEGA128D3-MH Максимальные параметры и электрические характеристики
| Product Type | 8-/16-bit AVR XMEGA microcontroller |
| Максимальная тактовая частота | 32 MHz |
| Program Flash | 128 KB (64K x 16) |
| Boot Code Section | 8 KB |
| EEPROM | 2 KB |
| SRAM | 8 KB |
| Operating Voltage Range | 1.6 V to 3.6 V |
| General-Purpose I/O | 50 lines |
| Event System Channels | 4 channels |
| Real-Time Counter | 1 x 16-bit counter |
| Timer/Counter Resources | 5 x 16-bit timer/counters |
| Interrupt Controller | Programmable multi-level interrupt controller |
| Корпус | 64-QFN (9 x 9 mm) |
| Тип монтажа | Surface mount |
| Programming Interface | ISP |
| Flash Read-While-Write | Supported |
| Статус RoHS | Compliant |
Руководство по цоколевке ATXMEGA128D3-MH в корпусе 64-qfn (9 x 9 mm)
Цоколевка для ATXMEGA128D3-MH (корпус 64-qfn (9 x 9 mm)). Эта цифровая ИС включает выводы GPIO, интерфейсы связи (UART, SPI, I2C) и выводы питания. Обратитесь к техническому описанию производителя для альтернативных функций выводов и вариантов конфигурации. Необходимо для проектирования встраиваемых систем и трассировки печатных плат.
Нет подробных данных о распиновке для ATXMEGA128D3-MH.
Обратитесь к даташиту для полной конфигурации выводов.
Типичное применение
ATXMEGA128D3-MH подходит для 6 применениеs: Industrial Control Module, Data Acquisition System, Communication Controller, Low-Power Embedded Instrument, LED and PWM Control, Automated Test Equipment.
Industrial Control Module
The ATXMEGA128D3-MH fits compact industrial-control modules that coordinate sensors, actuators, and local communications. Its 50 GPIO lines provide substantial discrete-I/O capacity, while five 16-bit timer/counters support pulse measurement, timing, and PWM generation. The four-channel event system can route timing signals between peripherals, reducing software polling and improving response consistency. Operation from 1.6 V to 3.6 V supports compact low-voltage designs, provided the exact temperature grade and communication peripherals are confirmed for the industrial environment.
Рекомендуется
Data Acquisition System
The ATXMEGA128D3-MH is suitable for multichannel data-acquisition equipment that must sample, time, and buffer incoming signals. Its 50 GPIO lines can connect sensors, triggers, and status indicators, while the four-channel event system supports deterministic capture relationships between timers and external events. The 8 KB SRAM accommodates short acquisition buffers, and 128 KB of ISP Flash provides room for control code and calibration parameters. The analog-peripheral configuration and analog input limits must be checked against the required signal accuracy and bandwidth.
Рекомендуется
Communication Controller
The ATXMEGA128D3-MH can serve as the host controller in a compact communications appliance when its documented serial-interface resources meet the protocol requirements. The 32 MHz core provides timing headroom for packet processing, 128 KB of Flash supports firmware and protocol tables, and 8 KB of SRAM supports buffering. The multi-level interrupt controller helps prioritize incoming events, while timer/counter resources can supervise communication timing. Verify the exact USART, SPI, TWI, and CAN configuration before assigning network or transceiver connections.
Рекомендуется
Low-Power Embedded Instrument
The ATXMEGA128D3-MH is appropriate for battery-influenced measurement and control instruments because it combines a 32 MHz processor with a 1.6 V to 3.6 V operating range. The event system and timer/counters support low-latency measurement timing without continuous processor polling, while 50 GPIO lines simplify control-panel and sensor connections. Its 8 KB SRAM is sufficient for working data, and the 128 KB Flash area can hold application code and calibration records. Power consumption should be evaluated across active, idle, sleep, and peripheral-clock operating modes.
Рекомендуется
LED and PWM Control
The ATXMEGA128D3-MH is well suited to multi-channel LED and PWM control because it provides five flexible 16-bit timer/counters with compare modes and PWM capability. Multiple lighting or actuator channels can therefore use hardware-generated timing rather than software bit-banging, while the four-channel event system can synchronize timing events across the controller. The 50 GPIO lines leave capacity for enable inputs, fault signals, and status LEDs. Confirm timer channel mapping and package pin assignments before fixing the PCB, especially for synchronous dimming or precise duty-cycle requirements.
Рекомендуется
Automated Test Equipment
The ATXMEGA128D3-MH can coordinate automated test equipment where deterministic sequencing, discrete control, and local data handling are required. Five 16-bit timer/counters support stimulus timing, the real-time counter can maintain an independent time base, and the event system connects timing events without constant software intervention. Its 50 GPIO lines support fixture control and result signaling, while 8 KB of SRAM can hold transient test records. The firmware must define safe limits for actuator outputs, and the analog characteristics must be validated for the measured quantities.
Рекомендуется
Сводка рекомендуемых товаров
Справочные инженерные данные для ATXMEGA128D3-MH — сравнение, рекомендации по проектированию и информация о соответствии.
Руководство по выбору
Сравнение с аналогами
| Параметр | Этот товар | ATXMEGA128D3-MNR | ATXMEGA128D4-MH | ATXMEGA128B3-MH | ATXMEGA128A3U-MH | ATXMEGA128A3U-AU |
|---|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Product Family | AVR XMEGA D3 | AVR XMEGA D3 | AVR XMEGA D4 | AVR XMEGA B3 | AVR XMEGA A3U | AVR XMEGA A3U |
Ключевые отличия
- Balanced embedded-control resource set (против ATXMEGA128D3-MNR)
- Dedicated D3 event-routing resource (против ATXMEGA128B3-MH)
- Large I/O count in a compact package (против ATXMEGA128A3U-MH)
- Substantial code and working memory (против ATXMEGA128A3U-AU)
Заметки по проектированию
Use the manufacturer land pattern for the 64-QFN 9 x 9 mm package and preserve the exposed thermal pad connection specified by the datasheet. Place decoupling capacitors at the associated power pins with short, low-inductance return paths to the ground plane. Do not route high-speed or sensitive signals beneath the device unless the recommended stack-up and return path have been reviewed, and verify each package pin against the pin-description table before releasing copper.
Treat analog, clock, and communication signals according to their individual datasheet requirements. Keep crystal or clock routing short, maintain a continuous ground reference beneath routed signals, and isolate switching nodes from measurement inputs. The XMEGA event system can reduce processor timing jitter, but successful hardware event routing still depends on correct peripheral configuration and pin multiplexing. Validate alternate-function assignments in the device configuration headers before PCB fabrication.
Do not treat a family member with the same QFN outline as automatically interchangeable. Review the exact suffix, temperature grade, supply range, exposed-pad treatment, pin multiplexing, boot configuration, fuse defaults, peripheral availability, and register behavior. After substitution, rebuild the project with the new device definition and run timing, communication, boot, and peripheral tests even when the land pattern remains unchanged.
The 1.6 V to 3.6 V operating range does not define the final power budget because core current, active current, sleep current, and attached peripheral loads differ by operating mode. Calculate the regulator's worst-case supply requirement across startup, maximum clock operation, I/O load, and communication activity. Confirm decoupling capacitance and voltage tolerances using the manufacturer requirements rather than a generic bulk-capacitor rule.
Информация о соответствии
RoHS status is identified by the component comparison data. Other environmental, automotive, and material-compliance attributes require confirmation in the Microchip product documentation or current declaration.