Microchip Technology

ATXMEGA128D3-MH - 32MHz 128KB AVR MCU | Microchip Technology

MPN: ATXMEGA128D3-MH ✓ Hoạt động
1.6 V to 3.6 V Vdss 64-QFN (9 x 9 mm) Package 32 MHz Speed 128 KB (64K x 16) Memory
MOQ: 1 |

ATXMEGA128D3-MH Tóm tắt

The Microchip Technology ATXMEGA128D3-MH is an 8-/16-bit AVR XMEGA D3 microcontroller operating at up to 32 MHz, with 128 KB of ISP Flash and 8 KB of SRAM in a 64-QFN 9 x 9 mm package. It combines a 1.6 V to 3.6 V operating range, 2 KB of EEPROM, 50 general-purpose I/O lines, and a four-channel event system in one compact surface-mount package.

An 8-/16-bit MCU is a microcontroller whose AVR enhanced RISC core provides a compact instruction set for embedded control. The ATXMEGA128D3 belongs to the XMEGA D3 family within the broader AVR microcontroller and semiconductor hierarchy. It is intended for applications that need more memory and peripherals than a basic 8-bit AVR while retaining a simple, low-power embedded architecture.

Its principal resources include 128 KB of ISP Flash organized as 64K x 16, including an 8 KB boot-code section with read-while-write capability. The device also provides 2 KB of EEPROM and 8 KB of SRAM. Four-channel event-system hardware, 50 GPIO lines, a 16-bit real-time counter, and five flexible 16-bit timer/counters support deterministic peripheral timing and reduce reliance on software polling.

The 64-QFN package integrates a high-performance, low-power CMOS AVR microcontroller with extensive communication and timing peripherals. A programmable multi-level interrupt controller organizes events across the architecture, while the event system can connect timer, comparator, and other peripheral signals internally. This hardware event routing is useful when several timing-sensitive functions must operate without excessive interrupt-service overhead.

Typical uses include industrial control modules, data-acquisition equipment, communications controllers, low-power embedded instruments, and compact automation products. The 50 GPIO lines suit multi-channel sensing or discrete I/O, while the five timer/counters can generate timing references and PWM outputs. The 128 KB Flash capacity also allows larger application code, boot code, and protocol handling within a single device.

PCB design should preserve the exposed-pad and thermal requirements of the 64-QFN package while routing sensitive analog, clock, and communication signals according to the manufacturer datasheet. Firmware and fuse compatibility must also be checked against the exact ordering code because XMEGA family members can differ in peripheral availability, memory organization, or qualification.

This page combines the manufacturer resource summary, package details, strict same-package alternatives, application guidance, and a parameter comparison to simplify initial component screening. Confirm electrical limits, pin assignments, boot behavior, and programming requirements in the Microchip datasheet before releasing a PCB or production design.

Bộ thay thế dễ dàng lắp đặt cho ATXMEGA128D3-MH — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.

Các biến thể trong loạt này

Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với ATXMEGA128D3-MH (cùng hình factor và footprint) — khác nhau ở Package, SRAM, ADC, Boot Code Section, DAC.

Microchip Technology
Package: 44-pin VQFN (7x7 mm) with exposed pad
ADC: 12-bit, multi-channel
DAC: 2x 12-bit
So sánh với ATXMEGA128D3-MH →
Microchip Technology
Package: 64-pin QFN (9x9 mm)
SRAM: 4 KB
ADC: 12-bit, up to 12 channels
So sánh với ATXMEGA128D3-MH →
Microchip Technology
Package: 64-QFN (9x9 mm)
SRAM: 4 KB
Boot Code Section: 4 KB
So sánh với ATXMEGA128D3-MH →

ATXMEGA128D3-MNR

✅ Drop-In
📦 64-QFN (9 x 9 mm)
Same 32 MHz XMEGA D3 architecture, 128 KB Flash, and 64-QFN footprint; ordering-grade or packing details differ by up to 20% and require confirmation

📋 Tham chiếu thay thế (không có trong danh mục)

ATXMEGA128D4-MH

✅ Drop-In ⚠️ Thông số chưa được xác minh
Microchip Technology
📦 64-QFN (9 x 9 mm)
AVR (enhanced RISC), 8/16-bit · AVR XMEGA D4 · 32 MHz · 128 KB (64K x 16) with read-while-write · 2 KB · 8 KB · 1.6 V to 3.6 V · 34 programmable

Liên hệ để biết giá

Xem tài liệu →

ATXMEGA128B3-MH

✅ Drop-In ⚠️ Thông số chưa được xác minh
📦 64-QFN (9 x 9 mm)
Same AVR XMEGA family, 32 MHz-class operation, 128 KB memory class, and 64-QFN footprint; B3 peripheral differences reach 30%

📋 Tham chiếu thay thế (không có trong danh mục)

ATXMEGA128A3U-MH

✅ Drop-In ⚠️ Thông số chưa được xác minh
📦 64-QFN (9 x 9 mm)
Same AVR XMEGA architecture, 128 KB Flash, and 64-QFN footprint; A3U peripheral and interrupt differences reach 30%

📋 Tham chiếu thay thế (không có trong danh mục)

ATXMEGA128A3U-AU

✅ Drop-In
📦 64-QFN (9 x 9 mm)
Same AVR XMEGA architecture and 128 KB Flash class; package-ordering and A3U peripheral differences reach 30%

📋 Tham chiếu thay thế (không có trong danh mục)

ATXMEGA128D3-MH Tỷ lệ tối đa & tính chất điện

Product Type 8-/16-bit AVR XMEGA microcontroller
Tần số xung maksimum 32 MHz
Program Flash 128 KB (64K x 16)
Boot Code Section 8 KB
EEPROM 2 KB
SRAM 8 KB
Operating Voltage Range 1.6 V to 3.6 V
General-Purpose I/O 50 lines
Event System Channels 4 channels
Real-Time Counter 1 x 16-bit counter
Timer/Counter Resources 5 x 16-bit timer/counters
Interrupt Controller Programmable multi-level interrupt controller
Hộp 64-QFN (9 x 9 mm)
Kiểu lắp đặt Surface mount
Programming Interface ISP
Flash Read-While-Write Supported
Trạng thái RoHS Compliant

Hướng dẫn cấu hình chân ATXMEGA128D3-MH 64-qfn (9 x 9 mm)

Cấu hình chân cho ATXMEGA128D3-MH (64-qfn (9 x 9 mm) gói). IC số này bao gồm chân GPIO, giao diện truyền thông (UART, SPI, I2C) và chân nguồn. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết các chức năng chân thay thế và tùy chọn cấu hình. Cực kỳ quan trọng cho thiết kế hệ thống tích hợp và lập trình PCB.

Bảng cấu hình chân 64-qfn (9 x 9 mm) cho ATXMEGA128D3-MH

Không có dữ liệu chân cụ thể sẵn có cho ATXMEGA128D3-MH.

Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.

Ứng dụng tiêu biểu

ATXMEGA128D3-MH phù hợp cho 6 Áp dụngs: Industrial Control Module, Data Acquisition System, Communication Controller, Low-Power Embedded Instrument, LED and PWM Control, Automated Test Equipment.

🏭

Industrial Control Module

The ATXMEGA128D3-MH fits compact industrial-control modules that coordinate sensors, actuators, and local communications. Its 50 GPIO lines provide substantial discrete-I/O capacity, while five 16-bit timer/counters support pulse measurement, timing, and PWM generation. The four-channel event system can route timing signals between peripherals, reducing software polling and improving response consistency. Operation from 1.6 V to 3.6 V supports compact low-voltage designs, provided the exact temperature grade and communication peripherals are confirmed for the industrial environment.

🔧

Data Acquisition System

The ATXMEGA128D3-MH is suitable for multichannel data-acquisition equipment that must sample, time, and buffer incoming signals. Its 50 GPIO lines can connect sensors, triggers, and status indicators, while the four-channel event system supports deterministic capture relationships between timers and external events. The 8 KB SRAM accommodates short acquisition buffers, and 128 KB of ISP Flash provides room for control code and calibration parameters. The analog-peripheral configuration and analog input limits must be checked against the required signal accuracy and bandwidth.

🌐

Communication Controller

The ATXMEGA128D3-MH can serve as the host controller in a compact communications appliance when its documented serial-interface resources meet the protocol requirements. The 32 MHz core provides timing headroom for packet processing, 128 KB of Flash supports firmware and protocol tables, and 8 KB of SRAM supports buffering. The multi-level interrupt controller helps prioritize incoming events, while timer/counter resources can supervise communication timing. Verify the exact USART, SPI, TWI, and CAN configuration before assigning network or transceiver connections.

🧩

Low-Power Embedded Instrument

The ATXMEGA128D3-MH is appropriate for battery-influenced measurement and control instruments because it combines a 32 MHz processor with a 1.6 V to 3.6 V operating range. The event system and timer/counters support low-latency measurement timing without continuous processor polling, while 50 GPIO lines simplify control-panel and sensor connections. Its 8 KB SRAM is sufficient for working data, and the 128 KB Flash area can hold application code and calibration records. Power consumption should be evaluated across active, idle, sleep, and peripheral-clock operating modes.

💡

LED and PWM Control

The ATXMEGA128D3-MH is well suited to multi-channel LED and PWM control because it provides five flexible 16-bit timer/counters with compare modes and PWM capability. Multiple lighting or actuator channels can therefore use hardware-generated timing rather than software bit-banging, while the four-channel event system can synchronize timing events across the controller. The 50 GPIO lines leave capacity for enable inputs, fault signals, and status LEDs. Confirm timer channel mapping and package pin assignments before fixing the PCB, especially for synchronous dimming or precise duty-cycle requirements.

🖥️

Automated Test Equipment

The ATXMEGA128D3-MH can coordinate automated test equipment where deterministic sequencing, discrete control, and local data handling are required. Five 16-bit timer/counters support stimulus timing, the real-time counter can maintain an independent time base, and the event system connects timing events without constant software intervention. Its 50 GPIO lines support fixture control and result signaling, while 8 KB of SRAM can hold transient test records. The firmware must define safe limits for actuator outputs, and the analog characteristics must be validated for the measured quantities.

What is the ATXMEGA128D3-MH?
The ATXMEGA128D3-MH is a 32 MHz, 8-/16-bit AVR XMEGA D3 microcontroller with 128 KB of ISP Flash, 2 KB of EEPROM, and 8 KB of SRAM in a 64-QFN package. According to the Microchip ATxmega128D3 product page, the device also provides 50 GPIO lines, a four-channel event system, a programmable multi-level interrupt controller, a 16-bit real-time counter, and five 16-bit timer/counters.
What are the key specifications of ATXMEGA128D3-MH that engineers should know?
The ATXMEGA128D3-MH combines a 32 MHz AVR core, 128 KB of ISP Flash, 8 KB of SRAM, 2 KB of EEPROM, and 50 GPIO lines. According to the Microchip product page, its timing resources include five flexible 16-bit timer/counters, a 16-bit real-time counter, and a four-channel event system. The device operates from 1.6 V to 3.6 V and is packaged in a 64-QFN measuring 9 x 9 mm.
What is the operating voltage of ATXMEGA128D3-MH?
The ATXMEGA128D3-MH operates from 1.6 V to 3.6 V. The Microchip ATxmega128D3 product page identifies the device as a low-power 8-/16-bit AVR XMEGA microcontroller supporting this voltage range. When designing the power supply, confirm the voltage required by the attached peripherals and any communications transceivers because the MCU range does not automatically define the tolerance of the complete board.
Where can I download the ATXMEGA128D3-MH datasheet PDF?
The official ATXMEGA128D3-MH documentation begins on the Microchip ATxmega128D3 product page at https://www.microchip.com/en-us/product/ATxmega128D3. Use the datasheet link on that page for the complete pin description, electrical characteristics, memory map, clock behavior, peripheral details, and programming instructions. The product page and package summary identify the device as a 32 MHz AVR with 128 KB of ISP Flash in a 64-QFN package.
Where can I find the ATXMEGA128D3-MH pinout?
The ATXMEGA128D3-MH pinout is documented in the manufacturer datasheet linked from the Microchip ATxmega128D3 product page. The device uses a 64-QFN 9 x 9 mm package, so a 64-position footprint is required. Assign every power, ground, analog, communication, programming, and unused pin from the package drawing and pin-description table before routing the PCB; the exact pad geometry must also be checked against the land pattern.
Where can I buy ATXMEGA128D3-MH online?
Use the Request a Quote form on this page to request ATXMEGA128D3-MH availability, lead time, and order details. The exact ordering code includes the ATXMEGA128D3-MH 64-QFN package suffix, so specify that full MPN when requesting a quotation. Confirm authorized sourcing, manufacturer traceability, and the current lifecycle status before placing a production order.
What is the price of ATXMEGA128D3-MH?
Submit the ATXMEGA128D3-MH request through the Request a Quote form on this page for current pricing and quantity availability. The quote should identify the exact 64-QFN ordering code and requested pack quantity. For production planning, also request lead-time and lifecycle information so the component can be scheduled without relying on an outdated catalog price.
What is the lead time for ATXMEGA128D3-MH?
The current lead time for ATXMEGA128D3-MH should be requested through the Request a Quote form on this page. Include the required quantity, reel format, target delivery date, and manufacturing schedule so the supplier can confirm an actionable schedule. The device is an active Microchip product, but current factory and distribution allocation should always be confirmed for the exact suffix.
Is ATXMEGA128D3-MH in stock?
ATXMEGA128D3-MH availability is best confirmed through the Request a Quote form on this page. State the required quantity and packaging format in the request so the response reflects the exact ATXMEGA128D3-MH ordering code. Do not infer inventory from a catalog page or family-level listing, because stock can change separately for the 64-QFN package variant.
ATXMEGA128D3-MH vs ATXMEGA128D3-MNR - which is better?
Choose ATXMEGA128D3-MH when the design specifies that exact ordering code and its documented qualification, temperature, and packaging requirements. The ATXMEGA128D3-MNR is a closely related 64-QFN ordering option identified in the cross-reference data, but ordering suffixes can encode different grade, temperature, or packing information. Compare the manufacturer ordering-information table and pin descriptions before treating it as an interchangeable production substitute.
What is the difference between ATXMEGA128D3-MH and ATXMEGA128A3U-MH?
The ATXMEGA128D3-MH is the XMEGA D3 device, while the ATXMEGA128A3U-MH belongs to the XMEGA A3U family. Both are positioned as 128 KB Flash AVR microcontrollers, but family selection must account for peripheral mix, interrupt organization, analog functions, and board-level pin assignments. Treat them as footprint-compatible candidates only after every assigned pin and firmware register dependency has been checked against both datasheets.
When should I choose ATXMEGA128D3-MH over ATXMEGA128D4-MH?
Choose the ATXMEGA128D3-MH when its documented D3 peripheral set and 128 KB Flash configuration meet the design requirements without relying on D4-only resources. Select an ATXMEGA128D4-MH candidate when the additional D4-family resources improve timing, connectivity, or control capability and the board footprint is confirmed compatible. Both choices require a complete pin, clock, peripheral, and firmware compatibility review before substitution.
Is ATXMEGA128D3-MH suitable for industrial control applications?
The ATXMEGA128D3-MH is suitable for compact embedded-control designs when its electrical and temperature ratings meet the target environment. Its 50 GPIO lines, five 16-bit timer/counters, four-channel event system, and 16-bit real-time counter support deterministic sensing, timing, and actuation. For industrial deployment, verify the exact temperature grade, isolation requirements, environmental exposure, and production qualification against the complete system specification.
What can replace ATXMEGA128D3-MH?
The closest documented replacement candidates are same-package XMEGA variants, including ATXMEGA128D3-MNR and ATXMEGA128D4-MH, provided their ordering information and pin functions remain unchanged. The ATXMEGA128A3U-MH and ATXMEGA128B3-MH can also share the 64-QFN footprint, but they may change peripheral availability or register behavior. Confirm pin assignments, voltage range, memories, clocks, timers, communications, boot process, and firmware before replacement.
Is ATXMEGA128D3-MH the same as ATXMEGA128A3U-MH?
No, the ATXMEGA128D3-MH and ATXMEGA128A3U-MH are not automatically the same device despite both belonging to the 128 KB AVR XMEGA family and sharing a 64-QFN footprint option. Their D3 and A3U families can differ in peripheral resources and register behavior. Review both datasheets, including every connected pin and every peripheral used by the firmware, before treating the A3U part as a drop-in replacement.
What is the best Microchip equivalent for ATXMEGA128D3-MH?
The most practical Microchip equivalent depends on whether the replacement must retain the exact D3 feature set or only the 64-QFN footprint. ATXMEGA128D3-MNR is the closest ordering candidate identified in the cross-reference results, while ATXMEGA128D4-MH, ATXMEGA128B3-MH, and ATXMEGA128A3U-MH are same-family candidates worth evaluating. Confirm pin compatibility, peripheral differences, qualification, and software support before choosing the production substitute.
How is ATXMEGA128D3-MH programmed?
The ATXMEGA128D3-MH supports in-system programming through its ISP interface. Programming requires a compatible AVR programmer, correct power and signal levels, and the fuse and boot configuration appropriate to the application. Use the Microchip programming and bootloader documentation associated with the ATxmega128D3 family, and verify the ISP pins against the 64-QFN package drawing before designing the programming header or production fixture.

Dữ liệu tham khảo kỹ thuật cho ATXMEGA128D3-MH — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.

Hướng dẫn chọn lựa

Choose the ATXMEGA128D3-MH when the design requires the documented XMEGA D3 combination of a 32 MHz core, 128 KB ISP Flash, 8 KB SRAM, 2 KB EEPROM, 50 GPIO lines, five flexible 16-bit timer/counters, and a four-channel event system. Select ATXMEGA128D3-MNR only after checking its exact ordering, qualification, and packing details. Consider ATXMEGA128D4-MH when D4-family resources provide a functional benefit, and evaluate ATXMEGA128B3-MH or ATXMEGA128A3U-MH only when their peripheral changes are acceptable. A matching 64-QFN outline is not sufficient for substitution: verify every pin, alternate function, clock, boot feature, peripheral, register, and fuse before approval.

So sánh với các sản phẩm thay thế

Tham số Sản phẩm này ATXMEGA128D3-MNR ATXMEGA128D4-MH ATXMEGA128B3-MH ATXMEGA128A3U-MH ATXMEGA128A3U-AU
Brand Microchip Technology Microchip Technology Microchip Technology Microchip Technology Microchip Technology Microchip Technology
Product Family AVR XMEGA D3 AVR XMEGA D3 AVR XMEGA D4 AVR XMEGA B3 AVR XMEGA A3U AVR XMEGA A3U

Bảo phân biệt quan trọng

  • Balanced embedded-control resource set (vsATXMEGA128D3-MNR)
  • Dedicated D3 event-routing resource (vsATXMEGA128B3-MH)
  • Large I/O count in a compact package (vsATXMEGA128A3U-MH)
  • Substantial code and working memory (vsATXMEGA128A3U-AU)

Ghi chú thiết kế

Use the manufacturer land pattern for the 64-QFN 9 x 9 mm package and preserve the exposed thermal pad connection specified by the datasheet. Place decoupling capacitors at the associated power pins with short, low-inductance return paths to the ground plane. Do not route high-speed or sensitive signals beneath the device unless the recommended stack-up and return path have been reviewed, and verify each package pin against the pin-description table before releasing copper.

Treat analog, clock, and communication signals according to their individual datasheet requirements. Keep crystal or clock routing short, maintain a continuous ground reference beneath routed signals, and isolate switching nodes from measurement inputs. The XMEGA event system can reduce processor timing jitter, but successful hardware event routing still depends on correct peripheral configuration and pin multiplexing. Validate alternate-function assignments in the device configuration headers before PCB fabrication.

Do not treat a family member with the same QFN outline as automatically interchangeable. Review the exact suffix, temperature grade, supply range, exposed-pad treatment, pin multiplexing, boot configuration, fuse defaults, peripheral availability, and register behavior. After substitution, rebuild the project with the new device definition and run timing, communication, boot, and peripheral tests even when the land pattern remains unchanged.

The 1.6 V to 3.6 V operating range does not define the final power budget because core current, active current, sleep current, and attached peripheral loads differ by operating mode. Calculate the regulator's worst-case supply requirement across startup, maximum clock operation, I/O load, and communication activity. Confirm decoupling capacitance and voltage tolerances using the manufacturer requirements rather than a generic bulk-capacitor rule.

Thông tin tuân thủ

RoHS
Compliant
REACH
Unknown
AEC-Q100
Not Applicable
Không chì
Unknown
Không halogen
Unknown
Khoáng vật xung đột
Unknown

RoHS status is identified by the component comparison data. Other environmental, automotive, and material-compliance attributes require confirmation in the Microchip product documentation or current declaration.

Dữ liệu được xác minh vào: 2026-11-16 — dữ liệu được xác minh và quản lý bởi đội ngũ kỹ thuật phần cứng của XAIPART

Tìm kiếm liên quan

ATXMEGA128D3-MH ATXMEGA128D3-MH datasheet ATXMEGA128D3-MH datasheet pdf ATXMEGA128D3-MH pinout ATXMEGA128D3-MH equivalent ATXMEGA128D3-MH replacement ATXMEGA128D3-MH cross reference ATXMEGA128D3-MH vs ATXMEGA128D3-MNR ATXMEGA128D3-MH price ATXMEGA128D3-MH stock Microchip ATXMEGA128D3-MH ATXMEGA128D3 64 QFN pinout ATXMEGA128D3-MH application circuit ATXMEGA128D3-MH 32MHz 128KB

Các bộ phận và thuật ngữ liên quan

Microchip Technology ATXMEGA128D3-MH ATXMEGA128D3 ATXMEGA128D3-MNR ATXMEGA128D4-MH ATXMEGA128B3-MH ATXMEGA128A3U-MH ATXMEGA128A3U-AU AVR XMEGA D3 AVR enhanced RISC core 8-/16-bit microcontroller microcontroller semiconductor embedded control 64-QFN QFN package family surface-mount package ISP Flash read-while-write EEPROM SRAM four-channel event system programmable multi-level interrupt controller 16-bit timer/counter 16-bit real-time counter general-purpose I/O industrial control data acquisition RoHS
Báo giá nhanh RFQ
Hãy điền đầy đủ thông tin — đội ngũ bán hàng của chúng tôi sẽ phản hồi trong vòng 24 giờ
Mã sản phẩm Nhà sản xuất Kiểu đóng gói QTY Giá mục tiêu Phụ
✓
Báo giá đã gửi!

Chúng tôi sẽ trả lời email của bạn trong vòng 24 giờ

1
RFQ đã gửi
2
Phiếu báo giá nhận được
3
Đặt hàng thành công
4
Thanh toán
5
Đã gửi
6
Đã giao hàng
Xem chi tiết RFQ