Microchip Technology

ATXMEGA64C3-MN - 32MHz 64KB AVR MCU | Microchip

Артикул: ATXMEGA64C3-MN ✓ Активен
1.6 V to 3.6 V Vdss 64-pin VFQFN with exposed pad, 9 mm x 9 mm Package 32 MHz Speed 64 KB Memory
MOQ: 1 |

ATXMEGA64C3-MN Обзор

The Microchip ATXMEGA64C3-MN is a low-power 8/16-bit AVR XMEGA microcontroller with a 32 MHz clock, 64 KB in-system programmable Flash memory, 2 KB EEPROM, and 4 KB SRAM. The device is offered in a 64-pin VFQFN package measuring 9 mm by 9 mm and operates from a 1.6 V to 3.6 V supply. Its memory supports read-while-write operation, while an 8 KB boot-code section supports protected startup and firmware-update workflows.

An 8/16-bit microcontroller is a programmable semiconductor that combines a processor core, nonvolatile program memory, data memory, and peripherals in one integrated circuit. The AVR enhanced RISC architecture used by the XMEGA family executes instructions in a single clock cycle. Within the product hierarchy, ATXMEGA64C3-MN belongs to the XMEGA C3 family of 8/16-bit microcontrollers, combining general-purpose embedded control with event-system, communications, analog, and timing resources.

The 64 KB Flash program memory provides room for a bootloader and application firmware, including read-while-write operation in the application area. A dedicated 8 KB boot section allows critical code to be isolated from the main application. The 2 KB EEPROM supports nonvolatile parameter storage, while 4 KB SRAM provides working memory for stacks, buffers, communication frames, and real-time control data. The operating range of 1.6 V to 3.6 V supports low-voltage embedded systems.

The integrated four-channel event system provides a hardware mechanism for deterministic inter-peripheral signaling and precise timing without requiring extensive central-processor intervention. This is valuable when an application must connect timers, counters, comparators, or communication events deterministically. The 32 MHz operating frequency also provides useful throughput for protocol handling, control loops, and user-interface logic while retaining the efficiency associated with an 8/16-bit architecture.

Typical applications include industrial control modules, sensor hubs, building-automation nodes, compact data loggers, motor-control supervisory circuits, battery-powered instruments, and communication-enabled embedded equipment. In these systems, the microcontroller can manage mixed analog and digital functions, execute protocol stacks, and retain configuration data across power cycles. Its low-power operating characteristics are also useful for portable and energy-constrained products.

PCB design should preserve the exposed-pad thermal and electrical requirements of the VFQFN package. Place the device-side bypass capacitors close to the appropriate supply pins, route sensitive signals away from switching nodes, and follow the manufacturer datasheet land pattern and thermal-via recommendations. Confirm the exact pin assignments and alternate-function limitations before assigning peripheral pins or planning a board revision.

This page combines the manufacturer device specifications, practical package guidance, application-oriented engineering advice, and same-family drop-in alternatives to support faster component selection, schematic planning, PCB layout, and sourcing decisions for the ATXMEGA64C3-MN.

Аналоги без доработки для ATXMEGA64C3-MN — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.

ATXMEGA32C3-MN

✅ Прямая замена ⚠️ Характеристики не проверены
Microchip Technology
📦 64-pin VFQFN, 9 mm x 9 mm
8/16-bit AVR XMEGA microcontroller · 32 MHz · 32 KB · 8 KB · 2 KB · 4 KB · Supported · 4 channels

Уточнить цену

Открыть даташит →

ATXMEGA128C3-MN

✅ Прямая замена ⚠️ Характеристики не проверены
📦 64-pin VFQFN, 9 mm x 9 mm
Flash memory is 128 KB versus 64 KB, a 100% increase; package and core family remain compatible

📋 Справочный аналог (нет в каталоге)

ATXMEGA192C3-MN

✅ Прямая замена ⚠️ Характеристики не проверены
📦 64-pin VFQFN, 9 mm x 9 mm
Flash memory is 192 KB versus 64 KB, a 200% increase; package and core family remain compatible

📋 Справочный аналог (нет в каталоге)

ATXMEGA256C3-MN

✅ Прямая замена ⚠️ Характеристики не проверены
📦 64-pin VFQFN, 9 mm x 9 mm
Flash memory is 256 KB versus 64 KB, a 300% increase; package and core family remain compatible

📋 Справочный аналог (нет в каталоге)

ATXMEGA64D4-ANR

✅ Прямая замена
📦 64-pin QFN, 9 mm x 9 mm
Clock and 8/16-bit core class remain 32 MHz, while the D4 peripheral and event-system resources differ from the C3

📋 Справочный аналог (нет в каталоге)

ATXMEGA64C3-MN Максимальные параметры и электрические характеристики

Product Type 8/16-bit AVR XMEGA microcontroller
Максимальная тактовая частота 32 MHz
Flash Memory 64 KB
Flash Organization 32K x 16 bits
Boot Loader Section 8 KB
Read-While-Write Support Supported
EEPROM Memory 2 KB
SRAM 4 KB
Event System Channels 4 channels
Рабочее напряжение питания 1.6 V to 3.6 V
Maximum Operating Temperature 105 °C
Корпус 64-pin VFQFN with exposed pad, 9 mm x 9 mm
Тип монтажа Surface mount
Core Architecture AVR enhanced RISC, 8/16-bit
Program Memory Type In-system programmable Flash

Руководство по цоколевке ATXMEGA64C3-MN в корпусе 64-pin vfqfn with exposed pad, 9 mm x 9 mm

Цоколевка для ATXMEGA64C3-MN (корпус 64-pin vfqfn with exposed pad, 9 mm x 9 mm). Эта цифровая ИС включает выводы GPIO, интерфейсы связи (UART, SPI, I2C) и выводы питания. Обратитесь к техническому описанию производителя для альтернативных функций выводов и вариантов конфигурации. Необходимо для проектирования встраиваемых систем и трассировки печатных плат.

Схема цоколевки корпуса 64-pin vfqfn with exposed pad, 9 mm x 9 mm для ATXMEGA64C3-MN

Нет подробных данных о распиновке для ATXMEGA64C3-MN.

Обратитесь к даташиту для полной конфигурации выводов.

Типичное применение

ATXMEGA64C3-MN подходит для 6 применениеs: Industrial Sensor and Control Hub, Battery-Powered Data Logger, Building Automation Node, Communication Gateway, Portable Measurement Instrument, Motor-Control Supervisor.

🏭

Industrial Sensor and Control Hub

The ATXMEGA64C3-MN fits compact industrial sensing nodes that combine several measurement channels with local decision logic. Its 32 MHz clock provides useful execution speed, while 64 KB of Flash holds firmware, communication handlers, and configuration routines without forcing immediate use of external memory. The 4 KB SRAM supports protocol buffers and working variables, and 2 KB of EEPROM preserves calibration settings and counters across power cycles. The four-channel event system can coordinate timer, comparator, and peripheral events deterministically. Operate the device from the documented 1.6 V to 3.6 V range and validate industrial temperature requirements against the 105 °C maximum specified for the device.

🔋

Battery-Powered Data Logger

The ATXMEGA64C3-MN is appropriate for a battery-powered data logger that periodically samples sensors, records information locally, and transfers it through a serial interface. The 1.6 V to 3.6 V operating range supports low-voltage power systems, while low-power AVR operation permits duty-cycled behavior in which the processor sleeps between samples. Its 2 KB EEPROM can retain counters, calibration coefficients, and audit metadata without continuous Flash writes. The 64 KB program area can hold a bootloader and application simultaneously. Because board leakage, sensor current, and firmware sleep timing dominate total energy, evaluate the assembled product under its actual operating profile rather than relying on processor speed alone.

🧩

Building Automation Node

ATXMEGA64C3-MN-based building automation nodes can supervise lighting, occupancy, temperature, and networked sensor interfaces while maintaining a compact board footprint. The 32 MHz processor is sufficient for local state machines, protocol handling, debounce logic, and scheduled control functions. Read-while-write Flash capability can simplify coordinated firmware maintenance when a protected 8 KB boot section handles startup validation. The four-channel event system is useful for deterministic timing between timers and peripheral events. A 64-pin VFQFN package also supports dense routing to communications and sensing circuitry. Final board qualification should include power-budget analysis, brownout behavior, EMC testing, and validation of every communication interface used by the building system.

🌐

Communication Gateway

The ATXMEGA64C3-MN can serve as a small protocol gateway or embedded communications controller where firmware must maintain timing and translate between serial interfaces. A 32 MHz clock and 4 KB of SRAM provide capacity for framing, buffering, address management, and background protocol processing. The event system can connect timer-driven activity with communication or comparator events, reducing dependence on polling. The device's 64 KB Flash gives room for a bootloader and multiple protocol handlers, while EEPROM preserves configuration such as addressing and calibration data. Confirm UART, SPI, and other interface availability, alternate-function routing, and interrupt priorities in the manufacturer datasheet before assigning signals because software changes may be required when peripherals move between pins.

🖥️

Portable Measurement Instrument

The ATXMEGA64C3-MN suits portable instruments that combine local measurement, signal conditioning, display control, and data capture. Its 64 KB Flash can store acquisition routines, calibration workflows, menus, and communication firmware, while 4 KB of SRAM can absorb sample buffers and control state. The 32 MHz clock supports responsive digital filtering and timing without moving every operation to an external processor. The three-level supply range also gives designers flexibility across low-voltage battery or regulated rails. Precision analog performance remains a system-level consideration, so separate sensitive inputs from switching nodes, follow grounding guidance, and verify the selected external components. Temperature, noise, and reference accuracy should be measured on the complete assembly.

🔧

Motor-Control Supervisor

The ATXMEGA64C3-MN can serve as a supervisory controller in motor-control systems, coordinating commands, monitoring status, and enforcing timing around a dedicated power stage. Its four-channel event system is valuable for deterministic timer, comparator, and peripheral sequencing, while the 32 MHz clock can execute control-loop software and diagnostic state machines. The 64 KB Flash supports application firmware and boot logic, and the 2 KB EEPROM can store calibration values or operating counters. This role does not replace a high-current gate driver or power MOSFET; it complements them with control logic and diagnostics. Validate pin multiplexing, PWM resources, fault-response latency, thermal limits, and protective shutdown behavior in the final hardware.

What are the key specifications of ATXMEGA64C3-MN that engineers should know?
The ATXMEGA64C3-MN is a 32 MHz, 8/16-bit AVR XMEGA microcontroller with 64 KB of programmable Flash, 2 KB of EEPROM, and 4 KB of SRAM. It operates from 1.6 V to 3.6 V and uses a 64-pin VFQFN package with an exposed pad. According to the Microchip product page, the Flash includes an 8 KB boot-code section and supports read-while-write operation. The device also provides a four-channel event system for deterministic peripheral coordination.
What is the operating voltage of ATXMEGA64C3-MN?
The ATXMEGA64C3-MN operates from 1.6 V to 3.6 V. According to the Microchip ATxmega64C3 product documentation, this supply range supports low-voltage embedded designs while retaining access to a 32 MHz clock. Designers should include local bypass capacitors at the supply pins and confirm power-sequencing requirements when the microcontroller shares a rail with analog, communication, or external memory devices.
How much memory does the ATXMEGA64C3-MN have?
The ATXMEGA64C3-MN contains 64 KB of in-system programmable Flash, organized as 32K x 16 bits, plus 2 KB of EEPROM and 4 KB of SRAM. The manufacturer datasheet identifies an 8 KB boot-code section within Flash and confirms read-while-write capability. These memories support separate bootloader and application firmware, persistent configuration storage, and working space for real-time control or communication tasks.
Where can I download the ATXMEGA64C3-MN datasheet PDF?
The official ATXMEGA64C3-MN datasheet PDF is available from Microchip through the linked device datasheet for the ATxmega32C3, 64C3, 128C3, 192C3, and 256C3 family. According to that manufacturer document, the devices use the AVR enhanced RISC architecture and execute instructions in a single clock cycle. Use the package pinout and electrical characteristics from the same document when finalizing the schematic and PCB layout.
Where can I find the ATXMEGA64C3-MN pinout?
The ATXMEGA64C3-MN pinout is documented in the official Microchip family datasheet under the device pin description and package information sections. The part uses a 64-pin VFQFN package with an exposed pad, so PCB designs must follow the manufacturer land pattern and thermal-pad guidance. Assign alternate functions only after checking the pin multiplexing table because individual signals can move among I/O pins.
What can replace the ATXMEGA64C3-MN on the same PCB?
Same-family ATxmega C3 devices in the compatible 64-pin VFQFN package are the closest drop-in options for ATXMEGA64C3-MN. Candidates include ATXMEGA32C3-MN, ATXMEGA128C3-MN, ATXMEGA192C3-MN, and ATXMEGA256C3-MN, subject to firmware and peripheral-feature verification. No cross-brand drop-in replacement is established here. A replacement should not be released until power pins, boot configuration, exposed-pad layout, peripheral mapping, and application firmware have all been checked.
Is the ATXMEGA64C3-MN the same as ATXMEGA64C3-MNR?
The ATXMEGA64C3-MN and ATXMEGA64C3-MNR identify the same ATxmega64C3 device family and 64-pin VFQFN configuration, but their ordering suffixes commonly distinguish packaging or delivery form. The ATXMEGA64C3-MNR listing identifies the 64-QFN package and tape-and-reel format. Do not substitute the ordering codes without confirming reel, tray, moisture-protection, and labeling requirements for the assembled board.
When should I choose the ATXMEGA64C3-MN over another XMEGA C3 device?
Choose the ATXMEGA64C3-MN when a design needs the balance of 64 KB Flash, 2 KB EEPROM, 4 KB SRAM, a 32 MHz clock, and a four-channel event system in a 64-pin VFQFN package. Select a larger C3 variant when firmware growth requires more program memory, and select the smaller variant when 64 KB of Flash is unnecessary. Confirm exact peripheral availability and pin multiplexing against the manufacturer datasheet.
Is the ATXMEGA64C3-MN suitable for low-power embedded control?
The ATXMEGA64C3-MN is suitable for low-voltage embedded control because it operates from 1.6 V to 3.6 V and belongs to the low-power AVR XMEGA family. Its 32 MHz processor supports useful control throughput without requiring a higher clock in every duty cycle. Actual battery performance depends on the selected sleep modes, peripheral activity, firmware behavior, and the complete board design, so application-level power measurements remain essential.
What is the best drop-in replacement for ATXMEGA64C3-MN?
The best-supported drop-in candidates are same-family C3 devices that use the compatible 64-pin VFQFN footprint, including ATXMEGA32C3-MN, ATXMEGA128C3-MN, ATXMEGA192C3-MN, and ATXMEGA256C3-MN. Their principal differences are Flash capacity rather than the package outline. Before replacing the device, verify memory-partition assumptions, boot behavior, peripheral resources, pin multiplexing, and any firmware limits caused by the selected variant.
Where can I buy ATXMEGA64C3-MN online?
Use the Request a Quote form on this page to request ATXMEGA64C3-MN pricing, stock confirmation, and lead time. The manufacturer lists the part as active, while current channel availability and order quantities can change independently. Specify the required package, assembly quantity, date-code requirements, and target delivery schedule with the request so the commercial response matches the actual production requirement.
What is the price of ATXMEGA64C3-MN?
Request the current ATXMEGA64C3-MN quotation through the Request a Quote form on this page. Pricing depends on order quantity, package, production status, date-code requirements, and delivery terms, so a single static figure may not reflect a production order. The form provides the appropriate channel for a current unit-price response and quantity-break review tied to the requested build.
What is the lead time and stock status for ATXMEGA64C3-MN?
Request current stock, minimum order quantity, and lead time through the Request a Quote form on this page. The manufacturer lists the ATXMEGA64C3-MN as active, which indicates continued product support, but it does not establish a guaranteed inventory position or delivery interval. Include the required quantity, target date, approved vendor list, and assembly schedule when requesting the commercial commitment.
ATXMEGA64C3-MN vs ATXMEGA64D4-ANR: which fits a 64-QFN design?
The ATXMEGA64C3-MN and ATXMEGA64D4-ANR are both associated with 64-pin QFN-class packages and a 32 MHz, 8/16-bit AVR core, but they belong to different XMEGA families. The C3 device emphasizes the C3 event system and communication feature set, while the D4 provides a different peripheral mix. Treat the D4 as a redesign candidate rather than an automatic drop-in substitute until every pin assignment and application dependency has been verified.
Is there a cross-brand drop-in equivalent for ATXMEGA64C3-MN?
No cross-brand drop-in equivalent for the ATXMEGA64C3-MN is established by the available component cross-reference information. A different manufacturer’s microcontroller would require validation of package dimensions, pin multiplexing, power behavior, boot configuration, interrupt mapping, peripheral compatibility, and development-tool support. It should be treated as a board-level redesign unless its manufacturer explicitly documents pin-to-pin compatibility.
How should the ATXMEGA64C3-MN VFQFN package be handled in PCB layout?
Follow the Microchip datasheet land pattern, pin table, and exposed-pad requirements when laying out the ATXMEGA64C3-MN. Place input and output bypass capacitors close to their associated pins, provide the recommended thermal-via arrangement, and keep high-current or fast-switching traces away from sensitive inputs. The 9 mm by 9 mm VFQFN outline also requires careful assembly-planar checks because exposed-pad solder volume affects both electrical and thermal performance.

Справочные инженерные данные для ATXMEGA64C3-MN — сравнение, рекомендации по проектированию и информация о соответствии.

Руководство по выбору

Choose the ATXMEGA64C3-MN when a compact 64-pin VFQFN design needs a 32 MHz AVR XMEGA processor, 64 KB of Flash, 2 KB of EEPROM, 4 KB of SRAM, and the four-channel C3 event system. ATXMEGA32C3-MN is appropriate when 32 KB of Flash is sufficient, while ATXMEGA128C3-MN, ATXMEGA192C3-MN, and ATXMEGA256C3-MN provide progressively larger program memories for firmware growth. Consider ATXMEGA64D4-ANR only when its D4-family peripherals and pin behavior meet the design requirements; it is marked obsolete in the available comparison listing. No cross-brand drop-in option is established, so a competitor device should be treated as a redesign unless its manufacturer explicitly documents pin-to-pin compatibility. For every selection, verify memory partitions, peripheral resources, interrupt priorities, pin multiplexing, boot configuration, exposed-pad layout, and environmental requirements.

Сравнение с аналогами

Параметр Этот товар ATXMEGA32C3-MN ATXMEGA128C3-MN ATXMEGA192C3-MN ATXMEGA256C3-MN ATXMEGA64D4-ANR
Manufacturer Microchip Technology Microchip Technology Microchip Technology Microchip Technology Microchip Technology Microchip Technology
Package 64-pin VFQFN, 9 mm x 9 mm 64-pin VFQFN, 9 mm x 9 mm 64-pin VFQFN, 9 mm x 9 mm 64-pin VFQFN, 9 mm x 9 mm 64-pin VFQFN, 9 mm x 9 mm 64-pin QFN, 9 mm x 9 mm
CPU Core 8/16-bit AVR enhanced RISC 8/16-bit AVR enhanced RISC 8/16-bit AVR enhanced RISC 8/16-bit AVR enhanced RISC 8/16-bit AVR enhanced RISC 8/16-bit AVR enhanced RISC
Maximum Clock Frequency 32 MHz 32 MHz 32 MHz 32 MHz 32 MHz 32 MHz
Flash Memory 64 KB 32 KB 128 KB 192 KB 256 KB 64 KB
Event System 4 channels 4 channels 4 channels 4 channels 4 channels D4-family event-system configuration; exact channel count not established

Ключевые отличия

  • Balanced memory configuration (против ATXMEGA32C3-MN)
  • Room for firmware growth (против ATXMEGA128C3-MN)
  • C3-family event-system architecture (против ATXMEGA64D4-ANR)

Заметки по проектированию

Use the exact 64-pin VFQFN land pattern from the manufacturer datasheet, including the exposed-pad geometry and recommended thermal-via arrangement. Place decoupling capacitors close to the associated supply and ground pins, and connect the exposed pad to the ground plane with the specified via pattern. A compact land pattern without adequate thermal vias can increase junction temperature even when the schematic and component placement appear correct.

Keep the 1.6 V to 3.6 V supply range visible throughout power design, including startup, brownout, transient, and peripheral-load conditions. Provide local high-frequency bypass capacitance and isolate analog or communication supply paths where practical. Verify that boot programming, attached sensors, and communication transients cannot pull the rail outside the operating limits of the ATXMEGA64C3-MN.

Do not assume that every family member has identical peripheral resources or alternate-function mapping. Before firmware or schematic transfer, compare the target C3 device and selected alternative for timer channels, communication peripherals, interrupt vectors, pin multiplexing, and boot behavior. A physically matching package does not by itself guarantee that application firmware or board connections will function without modification.

Route externally accessible or noise-sensitive signals away from switching nodes and high-current return paths. Use a continuous ground reference beneath the device where the package design permits, minimize loop area in decoupling networks, and follow the manufacturer recommendations for exposed-pad grounding. If the design combines timers, communication interfaces, and sensitive analog inputs, review simultaneous switching behavior on the assembled PCB rather than evaluating each circuit in isolation.

Информация о соответствии

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Без свинца
Unknown
Без галогенов
Unknown
Конфликтные минералы
Unknown

No explicit environmental or automotive qualification declarations are stated for this ordering code.

Данные проверены: 2026-11-10 — данные проверены и курируются командой компонентной инженерии XAIPART

Похожие запросы

ATXMEGA64C3-MN datasheet ATXMEGA64C3-MN pinout ATXMEGA64C3-MN datasheet pdf ATXMEGA64C3-MN specifications ATXMEGA64C3-MN 64 QFN ATXMEGA64C3-MN drop-in replacement ATXMEGA64C3-MN equivalent ATXMEGA64C3-MN cross reference ATXMEGA64C3-MN vs ATXMEGA64D4-ANR ATXMEGA64C3-MN application circuit Microchip ATXMEGA64C3-MN ATXMEGA64C3-MN price ATXMEGA64C3-MN stock

Связанные компоненты & термины

Microchip Technology ATXMEGA64C3-MN ATXMEGA32C3-MN ATXMEGA128C3-MN ATXMEGA192C3-MN ATXMEGA256C3-MN ATXMEGA64D4-ANR AVR XMEGA AVR enhanced RISC 8/16-bit microcontroller microcontroller embedded processor semiconductor programmable Flash memory EEPROM SRAM boot-code section read-while-write event system four-channel event system 32 MHz clock 1.6 V to 3.6 V supply 64-pin VFQFN QFN package family surface-mount package exposed pad industrial control building automation sensor hub battery-powered electronics motor-control supervisor
Быстрый запрос цены (RFQ)
Заполните все данные — наша команда продаж ответит в течение 24 часов
Артикул Производитель Корпус QTY Целевая цена Итого
✓
Запрос цены отправлен!

Мы ответим на ваш email в течение 24 часов

1
RFQ отправлен
2
Предложение получено
3
Заказ оформлен
4
Оплата
5
Отправлено
6
Доставлено
Просмотреть детали RFQ