ATXMEGA64C3-MN - 32MHz 64KB AVR MCU | Microchip
N.º de pieza: ATXMEGA64C3-MN ✓ ActivoATXMEGA64C3-MN Descripción general
An 8/16-bit microcontroller is a programmable semiconductor that combines a processor core, nonvolatile program memory, data memory, and peripherals in one integrated circuit. The AVR enhanced RISC architecture used by the XMEGA family executes instructions in a single clock cycle. Within the product hierarchy, ATXMEGA64C3-MN belongs to the XMEGA C3 family of 8/16-bit microcontrollers, combining general-purpose embedded control with event-system, communications, analog, and timing resources.
The 64 KB Flash program memory provides room for a bootloader and application firmware, including read-while-write operation in the application area. A dedicated 8 KB boot section allows critical code to be isolated from the main application. The 2 KB EEPROM supports nonvolatile parameter storage, while 4 KB SRAM provides working memory for stacks, buffers, communication frames, and real-time control data. The operating range of 1.6 V to 3.6 V supports low-voltage embedded systems.
The integrated four-channel event system provides a hardware mechanism for deterministic inter-peripheral signaling and precise timing without requiring extensive central-processor intervention. This is valuable when an application must connect timers, counters, comparators, or communication events deterministically. The 32 MHz operating frequency also provides useful throughput for protocol handling, control loops, and user-interface logic while retaining the efficiency associated with an 8/16-bit architecture.
Typical applications include industrial control modules, sensor hubs, building-automation nodes, compact data loggers, motor-control supervisory circuits, battery-powered instruments, and communication-enabled embedded equipment. In these systems, the microcontroller can manage mixed analog and digital functions, execute protocol stacks, and retain configuration data across power cycles. Its low-power operating characteristics are also useful for portable and energy-constrained products.
PCB design should preserve the exposed-pad thermal and electrical requirements of the VFQFN package. Place the device-side bypass capacitors close to the appropriate supply pins, route sensitive signals away from switching nodes, and follow the manufacturer datasheet land pattern and thermal-via recommendations. Confirm the exact pin assignments and alternate-function limitations before assigning peripheral pins or planning a board revision.
This page combines the manufacturer device specifications, practical package guidance, application-oriented engineering advice, and same-family drop-in alternatives to support faster component selection, schematic planning, PCB layout, and sourcing decisions for the ATXMEGA64C3-MN.
Alternativas directas para ATXMEGA64C3-MN — mismo encapsulado, compatible pin a pin. Se excluyen las piezas de otro encapsulado que requieren retrabajo de la PCB.
ATXMEGA32C3-MN
✅ Sustitución directa ⚠️ Especificaciones sin verificarConsulte el precio
Ver hoja de datos →ATXMEGA128C3-MN
✅ Sustitución directa ⚠️ Especificaciones sin verificar📋 Alternativa de referencia (no en el catálogo)
ATXMEGA192C3-MN
✅ Sustitución directa ⚠️ Especificaciones sin verificar📋 Alternativa de referencia (no en el catálogo)
ATXMEGA256C3-MN
✅ Sustitución directa ⚠️ Especificaciones sin verificar📋 Alternativa de referencia (no en el catálogo)
ATXMEGA64D4-ANR
✅ Sustitución directa📋 Alternativa de referencia (no en el catálogo)
ATXMEGA64C3-MN Valores máximos y características eléctricas
| Product Type | 8/16-bit AVR XMEGA microcontroller |
| Frecuencia de reloj máxima | 32 MHz |
| Flash Memory | 64 KB |
| Flash Organization | 32K x 16 bits |
| Boot Loader Section | 8 KB |
| Read-While-Write Support | Supported |
| EEPROM Memory | 2 KB |
| SRAM | 4 KB |
| Event System Channels | 4 channels |
| Tensión de alimentación de funcionamiento | 1.6 V to 3.6 V |
| Maximum Operating Temperature | 105 °C |
| Encapsulado | 64-pin VFQFN with exposed pad, 9 mm x 9 mm |
| Tipo de montaje | Surface mount |
| Core Architecture | AVR enhanced RISC, 8/16-bit |
| Program Memory Type | In-system programmable Flash |
Guía de configuración de pines de ATXMEGA64C3-MN 64-pin vfqfn with exposed pad, 9 mm x 9 mm
Configuración de pines para ATXMEGA64C3-MN (encapsulado 64-pin vfqfn with exposed pad, 9 mm x 9 mm). Este CI digital incluye GPIO, interfaces de comunicación (UART, SPI, I2C) y pines de alimentación. Consulte la hoja de datos del fabricante para conocer las funciones alternativas de los pines y las opciones de configuración. Esencial para el diseño de sistemas embebidos y el diseño de PCB.
No hay datos detallados de patillaje disponibles para ATXMEGA64C3-MN.
Consulte la hoja de datos para ver la configuración completa de patillas.
Aplicaciones típicas
ATXMEGA64C3-MN es adecuado para 6 aplicacións: Industrial Sensor and Control Hub, Battery-Powered Data Logger, Building Automation Node, Communication Gateway, Portable Measurement Instrument, Motor-Control Supervisor.
Industrial Sensor and Control Hub
The ATXMEGA64C3-MN fits compact industrial sensing nodes that combine several measurement channels with local decision logic. Its 32 MHz clock provides useful execution speed, while 64 KB of Flash holds firmware, communication handlers, and configuration routines without forcing immediate use of external memory. The 4 KB SRAM supports protocol buffers and working variables, and 2 KB of EEPROM preserves calibration settings and counters across power cycles. The four-channel event system can coordinate timer, comparator, and peripheral events deterministically. Operate the device from the documented 1.6 V to 3.6 V range and validate industrial temperature requirements against the 105 °C maximum specified for the device.
Recomendado
Battery-Powered Data Logger
The ATXMEGA64C3-MN is appropriate for a battery-powered data logger that periodically samples sensors, records information locally, and transfers it through a serial interface. The 1.6 V to 3.6 V operating range supports low-voltage power systems, while low-power AVR operation permits duty-cycled behavior in which the processor sleeps between samples. Its 2 KB EEPROM can retain counters, calibration coefficients, and audit metadata without continuous Flash writes. The 64 KB program area can hold a bootloader and application simultaneously. Because board leakage, sensor current, and firmware sleep timing dominate total energy, evaluate the assembled product under its actual operating profile rather than relying on processor speed alone.
Recomendado
Building Automation Node
ATXMEGA64C3-MN-based building automation nodes can supervise lighting, occupancy, temperature, and networked sensor interfaces while maintaining a compact board footprint. The 32 MHz processor is sufficient for local state machines, protocol handling, debounce logic, and scheduled control functions. Read-while-write Flash capability can simplify coordinated firmware maintenance when a protected 8 KB boot section handles startup validation. The four-channel event system is useful for deterministic timing between timers and peripheral events. A 64-pin VFQFN package also supports dense routing to communications and sensing circuitry. Final board qualification should include power-budget analysis, brownout behavior, EMC testing, and validation of every communication interface used by the building system.
Recomendado
Communication Gateway
The ATXMEGA64C3-MN can serve as a small protocol gateway or embedded communications controller where firmware must maintain timing and translate between serial interfaces. A 32 MHz clock and 4 KB of SRAM provide capacity for framing, buffering, address management, and background protocol processing. The event system can connect timer-driven activity with communication or comparator events, reducing dependence on polling. The device's 64 KB Flash gives room for a bootloader and multiple protocol handlers, while EEPROM preserves configuration such as addressing and calibration data. Confirm UART, SPI, and other interface availability, alternate-function routing, and interrupt priorities in the manufacturer datasheet before assigning signals because software changes may be required when peripherals move between pins.
Recomendado
Portable Measurement Instrument
The ATXMEGA64C3-MN suits portable instruments that combine local measurement, signal conditioning, display control, and data capture. Its 64 KB Flash can store acquisition routines, calibration workflows, menus, and communication firmware, while 4 KB of SRAM can absorb sample buffers and control state. The 32 MHz clock supports responsive digital filtering and timing without moving every operation to an external processor. The three-level supply range also gives designers flexibility across low-voltage battery or regulated rails. Precision analog performance remains a system-level consideration, so separate sensitive inputs from switching nodes, follow grounding guidance, and verify the selected external components. Temperature, noise, and reference accuracy should be measured on the complete assembly.
Recomendado
Motor-Control Supervisor
The ATXMEGA64C3-MN can serve as a supervisory controller in motor-control systems, coordinating commands, monitoring status, and enforcing timing around a dedicated power stage. Its four-channel event system is valuable for deterministic timer, comparator, and peripheral sequencing, while the 32 MHz clock can execute control-loop software and diagnostic state machines. The 64 KB Flash supports application firmware and boot logic, and the 2 KB EEPROM can store calibration values or operating counters. This role does not replace a high-current gate driver or power MOSFET; it complements them with control logic and diagnostics. Validate pin multiplexing, PWM resources, fault-response latency, thermal limits, and protective shutdown behavior in the final hardware.
Recomendado
Resumen de productos recomendados
Datos de referencia de ingeniería para ATXMEGA64C3-MN — comparación, orientación de diseño e información de cumplimiento.
Guía de selección
Comparación con alternativas
| Parámetro | Este producto | ATXMEGA32C3-MN | ATXMEGA128C3-MN | ATXMEGA192C3-MN | ATXMEGA256C3-MN | ATXMEGA64D4-ANR |
|---|---|---|---|---|---|---|
| Manufacturer | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 64-pin VFQFN, 9 mm x 9 mm | 64-pin VFQFN, 9 mm x 9 mm | 64-pin VFQFN, 9 mm x 9 mm | 64-pin VFQFN, 9 mm x 9 mm | 64-pin VFQFN, 9 mm x 9 mm | 64-pin QFN, 9 mm x 9 mm |
| CPU Core | 8/16-bit AVR enhanced RISC | 8/16-bit AVR enhanced RISC | 8/16-bit AVR enhanced RISC | 8/16-bit AVR enhanced RISC | 8/16-bit AVR enhanced RISC | 8/16-bit AVR enhanced RISC |
| Maximum Clock Frequency | 32 MHz | 32 MHz | 32 MHz | 32 MHz | 32 MHz | 32 MHz |
| Flash Memory | 64 KB | 32 KB | 128 KB | 192 KB | 256 KB | 64 KB |
| Event System | 4 channels | 4 channels | 4 channels | 4 channels | 4 channels | D4-family event-system configuration; exact channel count not established |
Diferenciadores clave
- Balanced memory configuration (frente a ATXMEGA32C3-MN)
- Room for firmware growth (frente a ATXMEGA128C3-MN)
- C3-family event-system architecture (frente a ATXMEGA64D4-ANR)
Notas de diseño
Use the exact 64-pin VFQFN land pattern from the manufacturer datasheet, including the exposed-pad geometry and recommended thermal-via arrangement. Place decoupling capacitors close to the associated supply and ground pins, and connect the exposed pad to the ground plane with the specified via pattern. A compact land pattern without adequate thermal vias can increase junction temperature even when the schematic and component placement appear correct.
Keep the 1.6 V to 3.6 V supply range visible throughout power design, including startup, brownout, transient, and peripheral-load conditions. Provide local high-frequency bypass capacitance and isolate analog or communication supply paths where practical. Verify that boot programming, attached sensors, and communication transients cannot pull the rail outside the operating limits of the ATXMEGA64C3-MN.
Do not assume that every family member has identical peripheral resources or alternate-function mapping. Before firmware or schematic transfer, compare the target C3 device and selected alternative for timer channels, communication peripherals, interrupt vectors, pin multiplexing, and boot behavior. A physically matching package does not by itself guarantee that application firmware or board connections will function without modification.
Route externally accessible or noise-sensitive signals away from switching nodes and high-current return paths. Use a continuous ground reference beneath the device where the package design permits, minimize loop area in decoupling networks, and follow the manufacturer recommendations for exposed-pad grounding. If the design combines timers, communication interfaces, and sensitive analog inputs, review simultaneous switching behavior on the assembled PCB rather than evaluating each circuit in isolation.
Información de cumplimiento
No explicit environmental or automotive qualification declarations are stated for this ordering code.