Microchip Technology

ATXMEGA8E5-M4N - 32MHz 8KB AVR Microcontroller | Microchip

Артикул: ATXMEGA8E5-M4N ✓ Активен
1.6 V to 3.6 V Vdss 32-UQFN, 4 mm x 4 mm Package 32 MHz Speed 8 KB Memory
MOQ: 1 |

ATXMEGA8E5-M4N Обзор

The Microchip Technology ATXMEGA8E5-M4N is a low-power 8/16-bit AVR XMEGA microcontroller operating at up to 32 MHz, with 8 KB of ISP flash memory, 2 KB of boot-code storage, 512 bytes of EEPROM, and 1 KB of SRAM. The device is offered in a 32-pin UQFN package measuring 4 mm by 4 mm, with a stated operating-temperature maximum of 105 °C and a 1.6 V to 3.6 V operating-voltage range.

An 8-bit microcontroller is a compact embedded-processing device built around a central processing unit, memory, and programmable peripherals. Within the Microchip product hierarchy, the ATxmega8E5 belongs to the AVR XMEGA family of 8/16-bit microcontrollers. This family combines a high-performance, low-power AVR enhanced RISC architecture with event handling, mixed-signal control, communications, and timing resources suited to compact embedded systems.

The ATXMEGA8E5-M4N includes an eight-channel event system and a programmable multi-level interrupt mechanism according to the Microchip product-page summary. Its 8 KB of ISP flash supports in-system programming, while read-while-write operation can permit programming while the application remains active. Separate boot-code storage provides 2 KB for startup code, and the combination of 1 KB SRAM and 512 bytes of EEPROM supports working state and retained configuration data.

The device runs at a maximum frequency of 32 MHz. This performance level is useful for protocol handling, timing-intensive control, and connected embedded functions without moving the design to a larger processor. Its 1.6 V to 3.6 V supply range permits use with common 3.3 V system rails, while the 105 °C maximum operating temperature provides an extended temperature option for demanding industrial equipment.

Typical uses include compact industrial controllers, IoT sensor nodes, building-control endpoints, low-power data acquisition units, communication modules, and small motor or actuator controllers. The small 4 mm by 4 mm UQFN package supports space-constrained designs, although its fine pitch and exposed thermal pad require careful PCB assembly and thermal management.

For implementation, place the decoupling capacitors close to the supply and ground pins, follow the manufacturer's recommended external-component arrangement, and provide programming access through the supported AVR interface. Verify the complete 32-pin signal map against the ATxmega8E5 datasheet before assigning alternate functions or designing a new footprint. Confirm that adjacent components, communication transceivers, and regulators meet the device's voltage and timing requirements.

This product page combines the Microchip family specifications, exact ATXMEGA8E5-M4N order-code details, package information, and engineering-oriented design guidance. It also distinguishes the specified 32-UQFN device from package variants that cannot replace it directly, helping designers assess footprint compatibility before committing a PCB or production BOM.

Аналоги без доработки для ATXMEGA8E5-M4N — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.

Варианты в этой серии

Модели той же серии, совместимые без доработки с ATXMEGA8E5-M4N (тот же форм-фактор и посадочное место) — отличается по Package, EEPROM, Product Type, SRAM, Core Architecture.

Microchip Technology
Package: 32-pin VQFN, 5 x 5 mm
EEPROM: 1 KB
Product Type: 8/16-bit RISC Microcontroller
Сравнить с ATXMEGA8E5-M4N →
Microchip Technology
Package: 32-pin VQFN, 5 x 5 mm
EEPROM: 1 KB
Product Type: 8/16-bit RISC Microcontroller
Сравнить с ATXMEGA8E5-M4N →
Microchip Technology
Package: 32-pin QFN, 5 x 5 mm
EEPROM: 512 B
Product Type: 8/16-bit AVR XMEGA microcontroller
Сравнить с ATXMEGA8E5-M4N →
Microchip Technology
Package: 32-QFN (5x5 mm)
Product Type: 8/16-bit AVR XMEGA E5 microcontroller
Сравнить с ATXMEGA8E5-M4N →

ATXMEGA8E5-MU

✅ Прямая замена ⚠️ Характеристики не проверены
Microchip Technology
📦 32-pin QFN (4 mm × 4 mm)
8/16-bit AVR XMEGA E5 microcontroller · 32 MHz · 8 KB · 4K x 16 · 2 KB · 1 KB · 512 bytes · 8 channels

Уточнить цену

Открыть даташит →

ATXMEGA8E5-M4N Максимальные параметры и электрические характеристики

Microcontroller Family AVR XMEGA
Architecture 8/16-bit AVR enhanced RISC
Maximum CPU Frequency 32 MHz
Program Flash Memory 8 KB
Boot Code Section 2 KB
EEPROM 512 bytes
SRAM 1 KB
Flash Programming In-system programming
Read-While-Write Flash Supported
Event System 8 channels
Operating Voltage Range 1.6 V to 3.6 V
Maximum Operating Temperature 105 °C
Корпус 32-UQFN, 4 mm x 4 mm
Тип монтажа Surface mount
Product Environmental Designation Green
Programmable Interrupt Levels Multi-level
Число выводов 32 pins

Руководство по цоколевке ATXMEGA8E5-M4N в корпусе 32-uqfn, 4 mm x 4 mm

Цоколевка для ATXMEGA8E5-M4N (корпус 32-uqfn, 4 mm x 4 mm). Эта цифровая ИС включает выводы GPIO, интерфейсы связи (UART, SPI, I2C) и выводы питания. Обратитесь к техническому описанию производителя для альтернативных функций выводов и вариантов конфигурации. Необходимо для проектирования встраиваемых систем и трассировки печатных плат.

Схема цоколевки корпуса 32-uqfn, 4 mm x 4 mm для ATXMEGA8E5-M4N

Нет подробных данных о распиновке для ATXMEGA8E5-M4N.

Обратитесь к даташиту для полной конфигурации выводов.

Типичное применение

ATXMEGA8E5-M4N подходит для 6 применениеs: Industrial Sensor and Control Node, IoT Edge Sensor Node, Building Automation Endpoint, Communication Protocol Converter, Compact Data Acquisition Module, Battery-Powered Embedded Controller.

🏭

Industrial Sensor and Control Node

The ATXMEGA8E5-M4N fits compact industrial sensing and control nodes that process several digital or timer-driven channels while maintaining a small board footprint. Its 32 MHz maximum clock supports responsive protocol handling and control logic, while the eight-channel event system can coordinate sensors and outputs without relying on constant polling. The 1 KB SRAM and 512-byte EEPROM are adequate for modest configuration and working data, but designers should budget memory before adding history logging. Operating from 1.6 V to 3.6 V simplifies integration with regulated low-voltage rails, and the 105 °C rating supports extended-temperature equipment when the surrounding components are also qualified.

🧩

IoT Edge Sensor Node

The ATXMEGA8E5-M4N can serve as the local control MCU in a small IoT sensor node that gathers measurements, performs threshold decisions, and prepares data for a communications module. Its 32 MHz processing rate provides headroom for lightweight digital filtering and serial protocols, while the eight-channel event system helps link timers, external inputs, and communication activity. The 8 KB program memory is suitable for compact firmware, and the 2 KB boot section can hold initialization or recovery routines. A 3.3 V system architecture fits the stated 1.6 V to 3.6 V operating range, provided the radio and sensors remain within compatible voltage limits.

🏠

Building Automation Endpoint

ATXMEGA8E5-M4N is appropriate for compact building-automation endpoints that coordinate switches, sensors, timing functions, and a low-speed communications interface. Its event system can link periodic measurements with asynchronous inputs, reducing the processing burden associated with simple polling architectures. The 32 MHz clock gives adequate margin for protocol handling and control logic, while 512 bytes of EEPROM can retain calibration values, device addresses, or configuration flags. The 4 mm by 4 mm 32-UQFN package helps reduce terminal-block or DIN-rail controller size. Firmware and SRAM requirements must be checked carefully because 8 KB and 1 KB are modest for complex gateway functions.

🌐

Communication Protocol Converter

The ATXMEGA8E5-M4N can support a small protocol-conversion or interface-control product when the design requires deterministic event timing and moderate protocol-processing load. The eight-channel event system is useful for coordinating serial transfers, timer events, and control signals, while the 32 MHz CPU provides processing margin for framing and state management. Its 1 KB SRAM must be sized against transmit buffers, receive queues, and the communication stack, and the 8 KB flash limit favors compact protocols or a dedicated companion transceiver. The 1.6 V to 3.6 V range permits integration into low-voltage interface boards, subject to the external transceiver requirements.

📟

Compact Data Acquisition Module

ATXMEGA8E5-M4N is suitable for a compact data-acquisition module that samples digital inputs, timestamps events, and forwards selected measurements over a serial link. The 32 MHz clock and programmable multi-level interrupt structure support time-sensitive acquisition routines, while the eight-channel event system can coordinate timers and peripheral events. The 1 KB SRAM is the principal design constraint for buffering, so continuous logging generally requires external storage or a higher-memory MCU. The device's 1.6 V to 3.6 V operating range supports low-voltage analog and sensor front ends, and the 105 °C maximum temperature can assist in extended-temperature industrial installations.

🔋

Battery-Powered Embedded Controller

The ATXMEGA8E5-M4N can be used in a battery-powered embedded controller when its low-power operating modes and event-driven architecture align with the duty cycle. Sleeping between infrequent measurements can reduce energy consumption, while the event system allows timers and external activity to wake the device selectively. The 1.6 V minimum operating voltage is useful for direct connection to suitably regulated low-voltage power systems, while 1 KB SRAM limits simultaneous data buffering. Firmware should use the 2 KB boot-code section for initialization rather than large application functions, and the complete power path must be sized for peak processing current rather than average sleep current.

Сводка рекомендуемых товаров

ATXMEGA8E5-M4N Microchip Technology Используется в: Industrial Sensor and Control Node, IoT Edge Sensor Node, Building Automation Endpoint, Communication Protocol Converter, Compact Data Acquisition Module, Battery-Powered Embedded Controller ATXMEGA8E5 ATxmega8E5 device family Используется в: Industrial Sensor and Control Node, IoT Edge Sensor Node, Building Automation Endpoint, Communication Protocol Converter, Compact Data Acquisition Module, Battery-Powered Embedded Controller
What is the Microchip ATXMEGA8E5-M4N?
The ATXMEGA8E5-M4N is a 32 MHz 8/16-bit AVR XMEGA microcontroller with 8 KB of ISP flash, 512 bytes of EEPROM, and 1 KB of SRAM in a 32-UQFN package. According to the Microchip ATxmega8E5 product page, the family also provides a 2 KB boot-code section, read-while-write capability, an eight-channel event system, and programmable multi-level interrupts. It is intended for compact embedded applications that need fast event handling, in-system programming, and a relatively small 4 mm by 4 mm footprint.
What is the operating voltage of ATXMEGA8E5-M4N?
The ATXMEGA8E5-M4N operates from 1.6 V to 3.6 V. According to the Microchip ATxmega8E5 family product page, this range supports low-voltage embedded systems and common 3.3 V power rails. The exact regulator tolerance, decoupling values, and minimum voltage required for each peripheral should be checked in the manufacturer datasheet before finalizing the power tree. This voltage range is a core selection criterion because it is narrower than the input range of many general-purpose microcontrollers.
Where can I download the ATXMEGA8E5-M4N datasheet PDF?
The ATXMEGA8E5-M4N datasheet documentation is accessible through the official Microchip ATxmega8E5 product page at https://www.microchip.com/en-us/product/ATxmega8E5. The ATXMEGA8E5-M4N is the 32-UQFN order code within that device family, so use the package-specific pin configuration and ordering information when assigning the footprint. The manufacturer product page provides the authoritative starting point for the current datasheet, device revision, programming resources, and related application documentation.
Where can I find the ATXMEGA8E5-M4N pinout?
The ATXMEGA8E5-M4N pinout is defined in the pin-description section of the Microchip ATxmega8E5 datasheet. The device uses a 32-UQFN package measuring 4 mm by 4 mm, so a complete layout requires all 32 positions, including power, ground, programming, clock, and alternate-function pins. Use the manufacturer pin-description table to assign each net and to confirm exposed-pad requirements; do not copy a 32-TQFN layout because the physical lead arrangement differs even though both packages contain 32 positions.
What are the key specifications of ATXMEGA8E5-M4N that engineers should know?
The ATXMEGA8E5-M4N combines a 32 MHz maximum CPU frequency with 8 KB of ISP flash, 2 KB of boot-code storage, 512 bytes of EEPROM, and 1 KB of SRAM. According to the Microchip ATxmega8E5 product page, it also provides an eight-channel event system and programmable multi-level interrupts. Its 1.6 V to 3.6 V operating range and 105 °C maximum temperature suit low-voltage embedded designs, while the 32-UQFN 4 mm by 4 mm package supports compact board layouts.
How much flash memory does ATXMEGA8E5-M4N have?
The ATXMEGA8E5-M4N includes 8 KB of ISP flash memory and a separate 2 KB boot-code section. According to the Microchip ATxmega8E5 family description, the flash supports read-while-write operation and in-system programming. Application firmware therefore has 8 KB of general program storage, while the boot section can hold startup or recovery code. The 1 KB SRAM is much smaller, so data-intensive buffering, logging, or graphics functions should be sized carefully rather than assuming the flash capacity can serve as working RAM.
Is ATXMEGA8E5-M4N suitable for a 3.3 V IoT sensor node?
The ATXMEGA8E5-M4N is suitable for a 3.3 V IoT sensor node when the design fits within 8 KB of flash and 1 KB of SRAM. Its 1.6 V to 3.6 V operating range includes 3.3 V, and the eight-channel event system can support efficient sensing and peripheral timing. The 32 MHz CPU provides protocol-processing headroom, but radio selection, sensor interface requirements, and application memory consumption must be reviewed before committing to this device.
What can replace ATXMEGA8E5-M4N?
A true drop-in replacement for ATXMEGA8E5-M4N must use the same 32-UQFN 4 mm by 4 mm footprint and preserve the pin functions, electrical limits, memory configuration, and peripheral behavior. The ATXMEGA8E5 family includes other package and ordering options, but those are not automatically drop-in replacements when their package dimensions or pin arrangement differ. Use the manufacturer's cross-reference search and compare the complete pin and peripheral lists before approving any substitute. No confirmed drop-in replacement is listed here.
Is ATXMEGA8E5-M4N the same as the ATxmega8E5 base device?
ATXMEGA8E5-M4N is a specific orderable configuration of the ATxmega8E5 family, identified by its package, temperature, and ordering suffixes. According to the Microchip product page, the family provides 8 KB of ISP flash, 512 bytes of EEPROM, 1 KB of SRAM, and an eight-channel event system. The M4N designation identifies the 32-UQFN 4 mm by 4 mm configuration with a stated maximum operating temperature of 105 °C, so it should not be treated as interchangeable with a different package suffix.
When should I choose ATXMEGA8E5-M4N over another 32 MHz microcontroller?
Choose the ATXMEGA8E5-M4N when the design specifically benefits from the AVR XMEGA event system, compact 32-UQFN packaging, and the family combination of 8 KB flash, 512 bytes of EEPROM, and 1 KB of SRAM. Its 32 MHz processing rate is suitable for compact control and communication tasks. Choose a larger-memory controller when firmware or buffering exceeds these resources, or a different package when assembly requirements and pin accessibility favor another footprint.
What is the best Microchip equivalent for ATXMEGA8E5-M4N?
The best Microchip equivalent is the one that preserves the 32-UQFN 4 mm by 4 mm footprint, pin mapping, memory capacities, clock behavior, and required peripheral functions. Microchip's official cross-reference search can compare family members and competitor parts, but a family relationship alone does not establish drop-in compatibility. Review the ATxmega8E5 ordering table and package drawings, then verify the candidate's pin functions, voltage range, temperature rating, flash organization, SRAM, EEPROM, and peripheral implementation against the production design.
Does ATXMEGA8E5-M4N need external memory for larger applications?
The ATXMEGA8E5-M4N provides 8 KB of ISP flash, 1 KB of SRAM, and 512 bytes of EEPROM, so larger applications may require a different microcontroller or external storage. The 2 KB boot-code section is intended for startup functions rather than general application expansion. External serial EEPROM can extend retained-data capacity, and external flash may assist with bulk storage, but it cannot replace general-purpose SRAM for time-critical processing. Select the MCU after estimating stack, buffers, protocol state, and logging requirements.
How does ATXMEGA8E5-M4N compare with ATXMEGA64A1-CUR?
The ATXMEGA8E5-M4N is optimized around 8 KB of flash, 1 KB of SRAM, and a compact 32-UQFN package, whereas the ATXMEGA64A1-CUR belongs to a larger-memory XMEGA family and uses a different package configuration. Although both are AVR XMEGA devices, their memory capacities, pin counts, package dimensions, and peripheral sets do not establish direct drop-in compatibility. The ATXMEGA8E5-M4N is preferable when its smaller footprint and resource requirements fit; the larger device is preferable when application memory, package pins, and expanded peripheral needs dominate.
Can ATXMEGA8E5-M4N be used for industrial control at 105 °C?
The ATXMEGA8E5-M4N has a stated maximum operating temperature of 105 °C, making it a candidate for extended-temperature industrial environments. That rating does not replace system-level thermal qualification. The PCB, regulator, crystal or clock source, decoupling capacitors, enclosure, and adjacent components must also tolerate the intended ambient temperature. Confirm that the complete production design maintains suitable junction-temperature margin and follows the manufacturer's layout and thermal recommendations.
Where can I buy ATXMEGA8E5-M4N and request current lead time?
Use the Request a Quote form on this page to request ATXMEGA8E5-M4N availability, current lead time, minimum order quantity, and orderable packaging. The manufacturer product page identifies the device as an ATxmega8E5 family member, while distributor search pages may also list it under the historical Atmel manufacturer name. A confirmed in-stock statement should be accepted only when it explicitly refers to the exact ATXMEGA8E5-M4N order code rather than another package or suffix of the ATxmega8E5 family.

Справочные инженерные данные для ATXMEGA8E5-M4N — сравнение, рекомендации по проектированию и информация о соответствии.

Руководство по выбору

Choose the ATXMEGA8E5-M4N when the design needs a compact 32 MHz AVR XMEGA controller with 8 KB of flash, 1 KB of SRAM, 512 bytes of EEPROM, an eight-channel event system, and a 4 mm by 4 mm 32-UQFN footprint. It is well suited to small sensor nodes, industrial control endpoints, protocol interfaces, and acquisition modules operating from 1.6 V to 3.6 V. Its 105 °C rating supports extended-temperature industrial use when the rest of the circuit is qualified. Select a higher-memory MCU for large applications, extensive buffering, graphical interfaces, or multiple communication stacks. Reject any alternative package that requires a new PCB footprint, and approve substitutions only after confirming pin functions, memory organization, peripheral behavior, boot operation, voltage limits, and programming compatibility.

Сравнение с аналогами

Параметр Этот товар
Brand Microchip Technology
Package 32-UQFN, 4 mm x 4 mm
Maximum CPU Frequency 32 MHz
Program Flash Memory 8 KB
Boot Code Section 2 KB
EEPROM 512 bytes
SRAM 1 KB
Operating Voltage Range 1.6 V to 3.6 V
Maximum Operating Temperature 105 °C
Event System 8 channels

Ключевые отличия

  • Compact 32-UQFN implementation (против ATXMEGA64A1-CUR)
  • Event-driven control architecture (против ATXMEGA64A1-CUR)
  • Extended-temperature order configuration (против ATXMEGA8E5-M4N)

Заметки по проектированию

Use the complete 32-UQFN land pattern from the manufacturer package drawing, including the exposed thermal-pad connection and its via arrangement. Confirm the terminal definitions against the ATxmega8E5 pin-description table because alternate functions and reserved positions must not be assigned from memory. Place the required supply-decoupling capacitor immediately beside the power and ground terminals, preserve a short return path for high-current transitions, and route programming signals so they remain accessible without creating long antenna-like traces around the MCU.

Design the supply for the ATXMEGA8E5-M4N's 1.6 V to 3.6 V operating range and the highest applicable transient current, not merely the average active current. A 3.3 V rail is within the device's range, but the regulator must also tolerate the voltage tolerance of the selected power source and startup behavior of the connected loads. Check the maximum clock, analog peripherals, communications interface, and output loads together. Place bulk energy storage near the rail origin and local ceramic decoupling beside the package to limit supply disturbance during instruction execution and peripheral activity.

The 32-UQFN package requires deliberate heat spreading because its small body limits the available surface area. Connect the exposed pad to a properly designed ground or thermal plane, use multiple thermal vias when permitted by the manufacturer layout, and avoid placing heat-generating regulators or power components directly beneath the MCU. The stated 105 °C maximum operating temperature does not remove the need for junction-temperature margin. Validate the final enclosure, ambient temperature, copper area, via count, switching loss, and neighboring heat sources under worst-case operating conditions.

Do not substitute another ATxmega8E5 package suffix without checking the physical footprint and pin mapping. Likewise, do not treat a functionally similar AVR device as a drop-in replacement when its memory organization, voltage limits, peripheral pins, or boot behavior differs. A valid substitution review must cover the 32-UQFN 4 mm by 4 mm footprint, all 32 positions, power and ground locations, programming signals, exposed-pad requirements, clock options, and peripheral assignments. Confirm production firmware and boot-loader compatibility before releasing an alternate part number.

Информация о соответствии

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Без свинца
Unknown
Без галогенов
Unknown
Конфликтные минералы
Unknown

The distributor listing describes the ATXMEGA8E5-M4N as Green, but no specific RoHS, REACH, halogen-free, conflict-minerals, or automotive-qualification declaration was identified. Confirm compliance documents for the exact order code before procurement.

Данные проверены: 2026-11-10 — данные проверены и курируются командой компонентной инженерии XAIPART

Похожие запросы

ATXMEGA8E5-M4N datasheet ATXMEGA8E5-M4N pinout ATXMEGA8E5-M4N specifications ATXMEGA8E5-M4N datasheet pdf ATXMEGA8E5-M4N equivalent ATXMEGA8E5-M4N replacement ATXMEGA8E5-M4N footprint ATXMEGA8E5-M4N cross reference ATXMEGA8E5-M4N vs ATXMEGA64A1-CUR ATXMEGA8E5-M4N price ATXMEGA8E5-M4N stock Microchip ATXMEGA8E5-M4N ATXMEGA8E5-M4N 32MHz 8KB ATXMEGA8E5-M4N 32-UQFN pinout ATXMEGA8E5-M4N IoT controller

Связанные компоненты & термины

Microchip Technology ATXMEGA8E5-M4N ATxmega8E5 ATXMEGA64A1-CUR AVR AVR XMEGA 8/16-bit microcontroller enhanced RISC architecture embedded microcontroller semiconductor 32 MHz 8 KB ISP flash memory 2 KB boot code section 512-byte EEPROM 1 KB SRAM eight-channel event system programmable multi-level interrupts read-while-write in-system programming 1.6 V to 3.6 V operating range 32-UQFN QFN package family surface-mount package 4 mm x 4 mm footprint IoT sensor node industrial controller building automation endpoint data acquisition battery-powered embedded controller
Быстрый запрос цены (RFQ)
Заполните все данные — наша команда продаж ответит в течение 24 часов
Артикул Производитель Корпус QTY Целевая цена Итого
✓
Запрос цены отправлен!

Мы ответим на ваш email в течение 24 часов

1
RFQ отправлен
2
Предложение получено
3
Заказ оформлен
4
Оплата
5
Отправлено
6
Доставлено
Просмотреть детали RFQ