Broadcom

BCM5461SA1IPF - Single-Port Gigabit Ethernet Transceiver | Broadcom

Артикул: BCM5461SA1IPF ✓ Активен
BGA Package
MOQ: 1 |

BCM5461SA1IPF Обзор

Broadcom BCM5461SA1IPF is a single-port 10/100/1000BASE-T Gigabit Ethernet copper transceiver integrated in a 100-terminal BGA package. It combines a 1 Gb/s Ethernet PHY with copper twisted-pair media support for single-port network equipment. The device is intended for applications requiring Gigabit Ethernet connectivity over standard copper cabling, including switches, routers, set-top equipment, and industrial Ethernet systems.

A Gigabit Ethernet transceiver is an interface IC that converts digital Ethernet data into signals suitable for transmission over copper media and reconstructs received signals for the host digital interface. Within the network-interface hierarchy, the BCM5461SA1IPF is a physical-layer transceiver rather than a switching or routing processor. Its single-port architecture supports one copper Ethernet channel and is intended to provide a direct physical-layer interface between a network controller or switching ASIC and a 10/100/1000BASE-T network.

The part is identified as an extended-temperature, single-port 10/100/1000 Ethernet device. Its 100-terminal BGA package provides a compact surface-mount footprint for multilayer PCB designs. The supplier listings classify BCM5461SA1IPF under drivers, receivers, and transceivers, reflecting its role as the active copper-port interface. Exact operating voltage, transceiver media reach, cable-length support, symbol rate, power consumption, and operating-temperature limits should be confirmed from the manufacturer datasheet before schematic sign-off.

BCM5461SA1IPF is suitable for designs where a separate PHY would add component count and board area. Integrating the Ethernet physical layer close to the host interface can simplify routing and shorten high-speed traces. Designers should nevertheless preserve the datasheet reference layout because proper separation of analog PHY, digital interface, crystal, clock, and power-supply paths is essential for reliable data transmission and electromagnetic compatibility.

Typical applications include single-port industrial Ethernet gateways, network adapters, router and switch line cards, set-top boxes, media bridges, and embedded communication systems. The single-port format also makes it practical for designs that need one copper uplink rather than a multi-port switching solution. A host Ethernet MAC, switch fabric, or processor with a compatible media-independent interface is still required for complete network operation.

The most important design checks are power sequencing, clock quality, magnetic-component selection, controlled-impedance routing, and separation between sensitive analog and digital circuitry. Follow the manufacturer datasheet for the recommended magnetic component, external capacitors, crystal or clock network, reset requirements, exposed-pad treatment, and PCB stack-up. Confirm those details before releasing a layout or placing a production order.

This page consolidates the verified package identity, interface classification, sourcing data, compatible Broadcom family candidates, and PCB-focused engineering guidance. It is designed to help engineers identify the correct Ethernet PHY and plan the mechanical, electrical, and procurement steps for a single-port Gigabit copper design.

Аналоги без доработки для BCM5461SA1IPF — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.

BCM5461SA1IPFG

✅ Прямая замена
📦 100-terminal BGA
Ordering suffix differs by one final code while the listed 10/100/1000 single-port Ethernet configuration remains equivalent; exact temperature and packing codes require confirmation.

📋 Справочный аналог (нет в каталоге)

BCM5461SA1KPFG

✅ Прямая замена
📦 100-terminal BGA
KPFG suffix replaces IPF, with the same Broadcom single-port Gigabit Ethernet family; qualification and ordering-code differences require datasheet verification.

📋 Справочный аналог (нет в каталоге)

BCM5461SA1KPFGP11

✅ Прямая замена
📦 100-terminal BGA
P11 adds a further ordering option to the KPFG variant; package code, reel format, and qualification must match before direct substitution.

📋 Справочный аналог (нет в каталоге)

BCM5461SA1KPFG--MR

✅ Прямая замена
📦 100-terminal BGA
MR identifies a distinct Broadcom ordering code within the KPFG family; tape-and-reel or other orderable-code differences must be confirmed.

📋 Справочный аналог (нет в каталоге)

BCM5461SA1KPFGB

✅ Прямая замена
📦 100-terminal BGA
B distinguishes another ordering code in the same Broadcom family; the exact package and electrical suffix meanings must be checked in the ordering guide.

📋 Справочный аналог (нет в каталоге)

BCM5461SA1IPF Максимальные параметры и электрические характеристики

Product Type Single-port Gigabit Ethernet copper transceiver
Supported Ethernet Data Rates 10/100/1000 Mb/s
Physical Layer Standard 10/100/1000BASE-T
Number of Ports 1 port
Number of Terminals 100 terminals
Package Type BGA
Тип монтажа Surface mount
Temperature Grade I-Temp
Media Type Copper twisted-pair

Руководство по цоколевке BCM5461SA1IPF в корпусе bga

Цоколевка для BCM5461SA1IPF (корпус bga). Этот аналоговый компонент имеет выводы входа, выхода и питания. Обратитесь к техническому описанию производителя для конфигураций выводов балансировки нуля, коррекции и разрешения. Идеально подходит для схем обработки сигналов и усилителей.

Схема цоколевки корпуса bga для BCM5461SA1IPF

Нет подробных данных о распиновке для BCM5461SA1IPF.

Обратитесь к даташиту для полной конфигурации выводов.

Типичное применение

BCM5461SA1IPF подходит для 6 применениеs: Industrial Ethernet Gateway, Single-Port Network Adapter, Router and Switch Line Card, Set-Top Box and Media Bridge, Embedded Communication Controller, Network Measurement Instrument.

🏭

Industrial Ethernet Gateway

BCM5461SA1IPF fits a single-port industrial Ethernet gateway that must connect embedded equipment to a 10/100/1000BASE-T network. The device provides the copper physical-layer endpoint beside an Ethernet MAC or industrial controller, avoiding a separate PHY when the host interface is compatible. Its single-port organization is useful for gateways with one upstream link rather than multiple copper ports. The layout should preserve the manufacturer-recommended separation between the PHY and digital interface, use the specified magnetic component, and provide filtered analog supplies. Because the BCM5461SA1IPF is listed as an I-Temp device, engineers should verify the complete operating-temperature limits, isolation requirements, EMC conditions, and supported cable length for the target industrial environment before production release.

🌐

Single-Port Network Adapter

BCM5461SA1IPF can serve as the 10/100/1000 copper interface in a compact single-port network adapter, PCI Express card, or embedded communications module. Its 100-terminal BGA construction supports compact multilayer routing, while the three advertised data rates allow compatibility with 10 Mb/s, 100 Mb/s, and 1 Gb/s copper links. A controller with the matching media-independent interface is required to complete the data path. Keep the high-speed digital interface over continuous ground planes, control impedance according to the manufacturer stack-up, and isolate the PHY and magnetics area from switching and clock sources. Verify host-interface timing, power sequencing, and auto-negotiation behavior in the manufacturer documentation before selecting the device for a new adapter design.

🖥️

Router and Switch Line Card

BCM5461SA1IPF is appropriate for a line card or plug-in module that requires one 10/100/1000BASE-T uplink. The transceiver can terminate the copper port next to a switching ASIC, media controller, or FPGA interface, providing a clear division between packet processing and physical signaling. A single-port architecture keeps the channel count and board area controlled compared with a multi-port copper PHY. For a dense backplane or rack-mounted system, pay particular attention to the manufacturer reference layout, magnetic-component placement, return paths, and isolation between adjacent channels. The Broadcom ordering code and package drawing should also be matched to the board assembly process, including the handling of any exposed pad and the required number of BGA signal and ground balls.

📺

Set-Top Box and Media Bridge

BCM5461SA1IPF supports the copper Ethernet connection in a set-top box, media bridge, or consumer network appliance with one Gigabit uplink. The 10/100/1000 Mb/s support lets the system accommodate legacy 100BASE-TX equipment while retaining a 1 Gb/s path for high-definition media transfer. The compact BGA package is useful where connector placement and board area are constrained. Design the PCB with the PHY and external magnetic component close to the RJ45 connector, maintain a continuous return path beneath high-speed pairs, and follow the manufacturer's keepout and component-placement guidance. Confirm EMI, isolation, and thermal requirements for the enclosure, then validate the assembled design over the required link speeds and cable lengths using the manufacturer's application configuration.

🔧

Embedded Communication Controller

BCM5461SA1IPF can provide the copper network endpoint for an embedded controller, test instrument, or machine controller with Ethernet connectivity. Using a dedicated PHY allows the host processor to handle higher-layer traffic while the BCM5461SA1IPF manages the 10/100/1000BASE-T physical layer. The BGA package requires careful assembly planning, including land pattern verification, paste volume, reflow profile, and inspection of closely spaced balls. Clock and reset signals should be routed away from the copper-channel area, and analog supplies should follow the manufacturer filtering recommendations. Before hardware release, confirm the digital interface voltage, timing, power rails, clock source, and supported operating conditions against the Broadcom datasheet to avoid an interface mismatch with the selected embedded controller.

📡

Network Measurement Instrument

BCM5461SA1IPF can form the copper test interface of a network measurement instrument, protocol analyzer, or traffic-generation appliance with one Gigabit Ethernet port. The multi-rate support enables testing of 10 Mb/s, 100 Mb/s, and 1 Gb/s links while the host supplies packet generation, capture, or stimulus functions. Accurate results depend on a clean PCB implementation, so the copper channel, magnetic component, clock network, and power rails should follow the reference layout without substitutions. Use a stable low-noise supply for analog circuitry, maintain consistent differential pair geometry, and place test-point access where it will not disturb the sensitive channel. The exact PHY tolerances, cable reach, auto-negotiation behavior, and operating-temperature envelope should be checked in the manufacturer document for the intended laboratory or field environment.

What is BCM5461SA1IPF?
BCM5461SA1IPF is a Broadcom single-port 10/100/1000BASE-T Gigabit Ethernet copper transceiver with 100 terminals in a surface-mount BGA package. It provides the physical-layer interface between an Ethernet MAC or switching ASIC and copper twisted-pair media. According to the Broadcom product listing, the device is categorized as a driver, receiver, and transceiver, and a related manufacturer distributor listing identifies it as an I-Temp single-port 10/100/1000 Ethernet IC.
What are the key specifications of BCM5461SA1IPF that engineers should know?
BCM5461SA1IPF is a 10/100/1000 Mb/s, single-port Ethernet copper transceiver in a 100-terminal BGA package. Its most important engineering characteristics are the three supported data rates, copper-media PHY function, compact BGA construction, and I-Temp device designation. The Broadcom and Mouser product records identify those core attributes. Supply voltage, power consumption, temperature limits, reach, and interface timing must be taken from the manufacturer datasheet before schematic and thermal validation.
Where can I download the BCM5461SA1IPF datasheet PDF?
The BCM5461SA1IPF datasheet can be reached through the Octopart document page for Broadcom BCM5461SA1IPF or through the linked Broadcom datasheet index. These pages provide access to the manufacturer document or its current copy. Use the manufacturer PDF as the controlling source for pin assignments, recommended application circuits, electrical limits, magnetic-component selection, and PCB-layout requirements.
Where can I find the BCM5461SA1IPF pinout?
The BCM5461SA1IPF pin assignment is published in the Broadcom manufacturer datasheet, which covers the 100-terminal BGA package. Use the pin-description table and land-pattern information in that document to assign power, ground, digital interface, clock, and analog copper connections. The package has 100 terminals, but a numbered application pinout should not be created from secondary catalog pages because ball assignments and exposed-pad requirements must follow the exact Broadcom document.
Is BCM5461SA1IPF suitable for a single-port Gigabit Ethernet design?
Yes, BCM5461SA1IPF is specifically suited to a single-port Gigabit Ethernet copper design because it supports 10/100/1000 Mb/s operation and is identified as a 10/100/1000BASE-T copper transceiver. The host system still requires a compatible Ethernet MAC, switch fabric, or controller. Confirm the exact digital interface, clocking method, power rails, cable reach, and auto-negotiation requirements in the manufacturer datasheet before finalizing the design.
What can replace BCM5461SA1IPF?
BCM5461SA1IPFG is the closest listed Broadcom family candidate for a drop-in consideration because it retains the single-port 10/100/1000 Ethernet description and corresponding BGA construction, but its final ordering code must still be checked against the required temperature grade, packing option, and exact land pattern. BCM5461SA1KPFG and BCM5461SA1KPFGP11 are additional same-family candidates, though suffix and package-code differences require direct comparison with the original ordering table before substitution.
Is BCM5461SA1IPF the same as BCM5461SA1IPFG?
BCM5461SA1IPF and BCM5461SA1IPFG are closely related Broadcom ordering codes for the same single-port 10/100/1000 Ethernet transceiver family, and the available listing describes BCM5461SA1IPFG as an I-Temp single-port 10/100/1000 device. They should not be treated as interchangeable without checking the manufacturer ordering guide, package ball pattern, qualification grade, tape-and-reel or tray configuration, and marking details. Confirm the exact suffix interpretation before production substitution.
What is the best Broadcom equivalent for BCM5461SA1IPF?
BCM5461SA1IPFG is the most direct Broadcom equivalent candidate because the product listing identifies it with the same single-port 10/100/1000 Ethernet description, while BCM5461SA1KPFG and BCM5461SA1KPFGP11 provide additional same-series possibilities. A true drop-in decision depends on exact package, ball map, temperature grade, and ordering suffix. Use the Broadcom datasheet and ordering information to verify those points before approving a replacement.
BCM5461SA1IPF vs BCM5461SA1KPFG - which is better for industrial Ethernet?
BCM5461SA1KPFG should be considered for industrial Ethernet only after its exact ordering suffix, temperature grade, package code, and lifecycle status are verified against BCM5461SA1IPF. Both identifiers belong to the Broadcom 10/100/1000 single-port transceiver family, but the available comparison record does not provide enough detailed electrical data to establish identical industrial qualification. Use the manufacturer ordering table and datasheet, including AEC-Q100 status when applicable, to make the final choice.
When should I choose BCM5461SA1IPF over BCM5461SA1IPFG?
Choose BCM5461SA1IPF when its exact package, temperature grade, qualification level, and ordering code match the PCB and production plan. Choose BCM5461SA1IPFG when Broadcom confirms an identical electrical configuration and land pattern but a different acceptable packaging or orderable suffix. The broad product descriptions are similar, so the decisive documentation is the manufacturer ordering information. Do not substitute based only on the shared 10/100/1000 Ethernet description.
Where to buy BCM5461SA1IPF online?
Use the Request a Quote form on this page to request BCM5461SA1IPF pricing, stock confirmation, minimum order quantity, and expected lead time. The form allows the request to be matched to current channel inventory without relying on a static price table. Confirm the exact MPN, package, temperature grade, and shipping quantity when submitting the request so that any quotation applies to the intended device.
What is the price of BCM5461SA1IPF?
Current BCM5461SA1IPF pricing is obtained through the Request a Quote form on this page because quote-based sourcing and market conditions can change pricing, stock, and lead time. Include the required quantity and desired package or reel configuration in the request. The visible structured offer is updated from current source data rather than using a stale historical catalog amount.
What is the lead time for BCM5461SA1IPF?
Request the current BCM5461SA1IPF lead time through the Request a Quote form on this page. Lead time can depend on order quantity, date code, authorized-channel inventory, and whether the required package or temperature suffix is available. Provide the exact MPN, target quantity, and required reel or tray format with the request for the most useful scheduling response.
Is BCM5461SA1IPF in stock?
Confirm BCM5461SA1IPF stock status through the Request a Quote form on this page. A distributor catalog or comparison page can show the product without establishing that the exact suffix and package quantity is immediately available. Ask the supplier to confirm the exact MPN, manufacturer condition, date code, packaging format, and dispatch quantity as part of the quotation.
What design details matter for a BCM5461SA1IPF PCB layout?
A BCM5461SA1IPF layout should closely follow the manufacturer reference layout, especially the copper-port connection, magnetic component, clock path, analog supply filtering, and exposed-pad treatment. Keep digital routing away from sensitive PHY nets, use the specified impedance geometry, and provide low-impedance ground planes. Verify whether the 100-terminal BGA uses an exposed thermal pad and follow the stated solder and assembly requirements for that exact package.

Справочные инженерные данные для BCM5461SA1IPF — сравнение, рекомендации по проектированию и информация о соответствии.

Руководство по выбору

Choose BCM5461SA1IPF when the PCB is designed around the Broadcom BCM5461SA1 single-port Gigabit Ethernet family and the exact IPF ordering code satisfies the required temperature, package, qualification, and assembly conditions. BCM5461SA1IPFG is a practical same-family candidate when its suffix provides the required production configuration and Broadcom confirms identical electrical and land-pattern compatibility. Consider BCM5461SA1KPFG, BCM5461SA1KPFGP11, BCM5461SA1KPFG--MR, or BCM5461SA1KPFGB only after checking the complete Broadcom ordering guide against the original IPF device. None should be approved solely because it appears in a family search. The final decision must reconcile package ballout, temperature grade, qualification, reel or tray format, lifecycle status, digital interface, clocking, and supply requirements with the manufacturer datasheet.

Сравнение с аналогами

Параметр Этот товар BCM5461SA1IPFG BCM5461SA1KPFG BCM5461SA1KPFGP11 BCM5461SA1KPFG--MR BCM5461SA1KPFGB
Package 100-terminal BGA 100-terminal BGA 100-terminal BGA 100-terminal BGA 100-terminal BGA 100-terminal BGA
Brand Broadcom Broadcom Broadcom Broadcom Broadcom Broadcom
Product Type Single-port Gigabit Ethernet copper transceiver Single-port 10/100/1000 Ethernet IC Broadcom BCM5461SA1 family Ethernet transceiver Broadcom BCM5461SA1 family Ethernet transceiver Broadcom BCM5461SA1 family Ethernet transceiver Broadcom BCM5461SA1 family Ethernet transceiver
Supported Data Rates 10/100/1000 Mb/s 10/100/1000 Mb/s 10/100/1000 Mb/s 10/100/1000 Mb/s 10/100/1000 Mb/s 10/100/1000 Mb/s
Port Count 1 port 1 port 1 port 1 port 1 port 1 port
Media Standard 10/100/1000BASE-T 10/100/1000 Ethernet 10/100/1000BASE-T family 10/100/1000BASE-T family 10/100/1000BASE-T family 10/100/1000BASE-T family
Number of Terminals 100 terminals 100 terminals 100 terminals 100 terminals 100 terminals 100 terminals
Mounting Type Surface mount Surface mount Surface mount Surface mount Surface mount Surface mount

Ключевые отличия

  • Direct single-port Gigabit Ethernet positioning (против BCM5461SA1IPFG)
  • Established Broadcom BCM5461SA1 family (против BCM5461SA1KPFG)
  • Same-family sourcing path with multiple ordering options (против BCM5461SA1KPFGP11)

Заметки по проектированию

Use the Broadcom reference layout as the controlling PCB template. Place the PHY, recommended magnetic component, and copper-side filtering components in the locations specified for the 100-terminal BGA, and maintain continuous ground references beneath the device. Confirm the land pattern, ball map, exposed-pad treatment, and assembly process from the exact manufacturer package drawing. Do not derive a footprint from a secondary catalog page.

Separate the copper PHY and magnetics region from clocks, switching regulators, and high-speed digital interfaces. Route differential copper connections as a controlled-impedance pair over a continuous reference plane and avoid stubs or unnecessary vias. Keep the manufacturer-specified supply-filter capacitors close to their associated pins. These steps reduce susceptibility to radiated and conducted noise while improving the integrity of the 10/100/1000BASE-T signaling path.

Do not treat a shared Broadcom family description as proof that every ordering suffix is automatically interchangeable. Before substitution, compare the BCM5461SA1IPF ordering code against the candidate for temperature grade, package code, reel or tray format, qualification status, pin and ball compatibility, and lifecycle status. Install the exact manufacturer footprint and verify the host interface voltage and clocking arrangement in the datasheet.

Информация о соответствии

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Без свинца
Unknown
Без галогенов
Unknown
Конфликтные минералы
Unknown

The available product records do not provide definitive compliance statements for this exact MPN. Confirm RoHS, REACH, lead-free, halogen-free, and conflict-minerals status using the current Broadcom product declaration.

Данные проверены: 2026-11-15 — данные проверены и курируются командой компонентной инженерии XAIPART

Похожие запросы

BCM5461SA1IPF datasheet BCM5461SA1IPF pinout BCM5461SA1IPF datasheet pdf BCM5461SA1IPF equivalent BCM5461SA1IPF replacement BCM5461SA1IPF cross reference BCM5461SA1IPF vs BCM5461SA1IPFG BCM5461SA1IPF vs BCM5461SA1KPFG BCM5461SA1IPF price BCM5461SA1IPF stock Broadcom BCM5461SA1IPF BCM5461SA1IPF BGA-100 footprint BCM5461SA1IPF Gigabit Ethernet application circuit

Связанные компоненты & термины

Broadcom BCM5461SA1IPF BCM5461SA1IPFG BCM5461SA1KPFG BCM5461SA1KPFGP11 BCM5461SA1KPFG--MR BCM5461SA1KPFGB Gigabit Ethernet transceiver Ethernet physical-layer IC 10/100/1000BASE-T copper twisted-pair network interface controller Ethernet MAC single-port Ethernet 100-terminal BGA BGA-100 surface-mount package industrial Ethernet network adapter line card media bridge embedded controller network measurement instrument
Быстрый запрос цены (RFQ)
Заполните все данные — наша команда продаж ответит в течение 24 часов
Артикул Производитель Корпус QTY Целевая цена Итого
✓
Запрос цены отправлен!

Мы ответим на ваш email в течение 24 часов

1
RFQ отправлен
2
Предложение получено
3
Заказ оформлен
4
Оплата
5
Отправлено
6
Доставлено
Просмотреть детали RFQ