BCM5461SA1IPF - Single-Port Gigabit Ethernet Transceiver | Broadcom
MPN: BCM5461SA1IPF ✓ 啟用中BCM5461SA1IPF 概覽
A Gigabit Ethernet transceiver is an interface IC that converts digital Ethernet data into signals suitable for transmission over copper media and reconstructs received signals for the host digital interface. Within the network-interface hierarchy, the BCM5461SA1IPF is a physical-layer transceiver rather than a switching or routing processor. Its single-port architecture supports one copper Ethernet channel and is intended to provide a direct physical-layer interface between a network controller or switching ASIC and a 10/100/1000BASE-T network.
The part is identified as an extended-temperature, single-port 10/100/1000 Ethernet device. Its 100-terminal BGA package provides a compact surface-mount footprint for multilayer PCB designs. The supplier listings classify BCM5461SA1IPF under drivers, receivers, and transceivers, reflecting its role as the active copper-port interface. Exact operating voltage, transceiver media reach, cable-length support, symbol rate, power consumption, and operating-temperature limits should be confirmed from the manufacturer datasheet before schematic sign-off.
BCM5461SA1IPF is suitable for designs where a separate PHY would add component count and board area. Integrating the Ethernet physical layer close to the host interface can simplify routing and shorten high-speed traces. Designers should nevertheless preserve the datasheet reference layout because proper separation of analog PHY, digital interface, crystal, clock, and power-supply paths is essential for reliable data transmission and electromagnetic compatibility.
Typical applications include single-port industrial Ethernet gateways, network adapters, router and switch line cards, set-top boxes, media bridges, and embedded communication systems. The single-port format also makes it practical for designs that need one copper uplink rather than a multi-port switching solution. A host Ethernet MAC, switch fabric, or processor with a compatible media-independent interface is still required for complete network operation.
The most important design checks are power sequencing, clock quality, magnetic-component selection, controlled-impedance routing, and separation between sensitive analog and digital circuitry. Follow the manufacturer datasheet for the recommended magnetic component, external capacitors, crystal or clock network, reset requirements, exposed-pad treatment, and PCB stack-up. Confirm those details before releasing a layout or placing a production order.
This page consolidates the verified package identity, interface classification, sourcing data, compatible Broadcom family candidates, and PCB-focused engineering guidance. It is designed to help engineers identify the correct Ethernet PHY and plan the mechanical, electrical, and procurement steps for a single-port Gigabit copper design.
直接替換替代品,適用於 BCM5461SA1IPF — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。
BCM5461SA1IPFG
✅ 直接替換📋 參考替代品(不在目錄中)
BCM5461SA1KPFG
✅ 直接替換📋 參考替代品(不在目錄中)
BCM5461SA1KPFGP11
✅ 直接替換📋 參考替代品(不在目錄中)
BCM5461SA1KPFG--MR
✅ 直接替換📋 參考替代品(不在目錄中)
BCM5461SA1KPFGB
✅ 直接替換📋 參考替代品(不在目錄中)
BCM5461SA1IPF 最大額定值與電氣特性
| Product Type | Single-port Gigabit Ethernet copper transceiver |
| Supported Ethernet Data Rates | 10/100/1000 Mb/s |
| Physical Layer Standard | 10/100/1000BASE-T |
| Number of Ports | 1 port |
| Number of Terminals | 100 terminals |
| Package Type | BGA |
| 安裝類型 | Surface mount |
| Temperature Grade | I-Temp |
| Media Type | Copper twisted-pair |
BCM5461SA1IPF bga 腳位配置指南
BCM5461SA1IPF(bga 封裝)的腳位配置。 此類比元件具有輸入、輸出與電源腳位。偏移歸零、補償與致能腳位配置請參閱製造商資料表。適用於訊號調理與放大器電路。
無詳細腳位定義資料: BCM5461SA1IPF.
請參閱 資料表 以查看完整腳位配置。
典型應用
BCM5461SA1IPF 適用於 6 應用s: Industrial Ethernet Gateway, Single-Port Network Adapter, Router and Switch Line Card, Set-Top Box and Media Bridge, Embedded Communication Controller, Network Measurement Instrument.
Industrial Ethernet Gateway
BCM5461SA1IPF fits a single-port industrial Ethernet gateway that must connect embedded equipment to a 10/100/1000BASE-T network. The device provides the copper physical-layer endpoint beside an Ethernet MAC or industrial controller, avoiding a separate PHY when the host interface is compatible. Its single-port organization is useful for gateways with one upstream link rather than multiple copper ports. The layout should preserve the manufacturer-recommended separation between the PHY and digital interface, use the specified magnetic component, and provide filtered analog supplies. Because the BCM5461SA1IPF is listed as an I-Temp device, engineers should verify the complete operating-temperature limits, isolation requirements, EMC conditions, and supported cable length for the target industrial environment before production release.
推薦
Single-Port Network Adapter
BCM5461SA1IPF can serve as the 10/100/1000 copper interface in a compact single-port network adapter, PCI Express card, or embedded communications module. Its 100-terminal BGA construction supports compact multilayer routing, while the three advertised data rates allow compatibility with 10 Mb/s, 100 Mb/s, and 1 Gb/s copper links. A controller with the matching media-independent interface is required to complete the data path. Keep the high-speed digital interface over continuous ground planes, control impedance according to the manufacturer stack-up, and isolate the PHY and magnetics area from switching and clock sources. Verify host-interface timing, power sequencing, and auto-negotiation behavior in the manufacturer documentation before selecting the device for a new adapter design.
推薦
Router and Switch Line Card
BCM5461SA1IPF is appropriate for a line card or plug-in module that requires one 10/100/1000BASE-T uplink. The transceiver can terminate the copper port next to a switching ASIC, media controller, or FPGA interface, providing a clear division between packet processing and physical signaling. A single-port architecture keeps the channel count and board area controlled compared with a multi-port copper PHY. For a dense backplane or rack-mounted system, pay particular attention to the manufacturer reference layout, magnetic-component placement, return paths, and isolation between adjacent channels. The Broadcom ordering code and package drawing should also be matched to the board assembly process, including the handling of any exposed pad and the required number of BGA signal and ground balls.
推薦
Set-Top Box and Media Bridge
BCM5461SA1IPF supports the copper Ethernet connection in a set-top box, media bridge, or consumer network appliance with one Gigabit uplink. The 10/100/1000 Mb/s support lets the system accommodate legacy 100BASE-TX equipment while retaining a 1 Gb/s path for high-definition media transfer. The compact BGA package is useful where connector placement and board area are constrained. Design the PCB with the PHY and external magnetic component close to the RJ45 connector, maintain a continuous return path beneath high-speed pairs, and follow the manufacturer's keepout and component-placement guidance. Confirm EMI, isolation, and thermal requirements for the enclosure, then validate the assembled design over the required link speeds and cable lengths using the manufacturer's application configuration.
推薦
Embedded Communication Controller
BCM5461SA1IPF can provide the copper network endpoint for an embedded controller, test instrument, or machine controller with Ethernet connectivity. Using a dedicated PHY allows the host processor to handle higher-layer traffic while the BCM5461SA1IPF manages the 10/100/1000BASE-T physical layer. The BGA package requires careful assembly planning, including land pattern verification, paste volume, reflow profile, and inspection of closely spaced balls. Clock and reset signals should be routed away from the copper-channel area, and analog supplies should follow the manufacturer filtering recommendations. Before hardware release, confirm the digital interface voltage, timing, power rails, clock source, and supported operating conditions against the Broadcom datasheet to avoid an interface mismatch with the selected embedded controller.
推薦
Network Measurement Instrument
BCM5461SA1IPF can form the copper test interface of a network measurement instrument, protocol analyzer, or traffic-generation appliance with one Gigabit Ethernet port. The multi-rate support enables testing of 10 Mb/s, 100 Mb/s, and 1 Gb/s links while the host supplies packet generation, capture, or stimulus functions. Accurate results depend on a clean PCB implementation, so the copper channel, magnetic component, clock network, and power rails should follow the reference layout without substitutions. Use a stable low-noise supply for analog circuitry, maintain consistent differential pair geometry, and place test-point access where it will not disturb the sensitive channel. The exact PHY tolerances, cable reach, auto-negotiation behavior, and operating-temperature envelope should be checked in the manufacturer document for the intended laboratory or field environment.
推薦
推薦產品摘要
工程參考資料,適用於 BCM5461SA1IPF — 比較、設計指引及合規資訊。
選型指南
與替代品比較
| 參數 | 本產品 | BCM5461SA1IPFG | BCM5461SA1KPFG | BCM5461SA1KPFGP11 | BCM5461SA1KPFG--MR | BCM5461SA1KPFGB |
|---|---|---|---|---|---|---|
| Package | 100-terminal BGA | 100-terminal BGA | 100-terminal BGA | 100-terminal BGA | 100-terminal BGA | 100-terminal BGA |
| Brand | Broadcom | Broadcom | Broadcom | Broadcom | Broadcom | Broadcom |
| Product Type | Single-port Gigabit Ethernet copper transceiver | Single-port 10/100/1000 Ethernet IC | Broadcom BCM5461SA1 family Ethernet transceiver | Broadcom BCM5461SA1 family Ethernet transceiver | Broadcom BCM5461SA1 family Ethernet transceiver | Broadcom BCM5461SA1 family Ethernet transceiver |
| Supported Data Rates | 10/100/1000 Mb/s | 10/100/1000 Mb/s | 10/100/1000 Mb/s | 10/100/1000 Mb/s | 10/100/1000 Mb/s | 10/100/1000 Mb/s |
| Port Count | 1 port | 1 port | 1 port | 1 port | 1 port | 1 port |
| Media Standard | 10/100/1000BASE-T | 10/100/1000 Ethernet | 10/100/1000BASE-T family | 10/100/1000BASE-T family | 10/100/1000BASE-T family | 10/100/1000BASE-T family |
| Number of Terminals | 100 terminals | 100 terminals | 100 terminals | 100 terminals | 100 terminals | 100 terminals |
| Mounting Type | Surface mount | Surface mount | Surface mount | Surface mount | Surface mount | Surface mount |
主要差異化特點
- Direct single-port Gigabit Ethernet positioning (對比BCM5461SA1IPFG)
- Established Broadcom BCM5461SA1 family (對比BCM5461SA1KPFG)
- Same-family sourcing path with multiple ordering options (對比BCM5461SA1KPFGP11)
設計說明
Use the Broadcom reference layout as the controlling PCB template. Place the PHY, recommended magnetic component, and copper-side filtering components in the locations specified for the 100-terminal BGA, and maintain continuous ground references beneath the device. Confirm the land pattern, ball map, exposed-pad treatment, and assembly process from the exact manufacturer package drawing. Do not derive a footprint from a secondary catalog page.
Separate the copper PHY and magnetics region from clocks, switching regulators, and high-speed digital interfaces. Route differential copper connections as a controlled-impedance pair over a continuous reference plane and avoid stubs or unnecessary vias. Keep the manufacturer-specified supply-filter capacitors close to their associated pins. These steps reduce susceptibility to radiated and conducted noise while improving the integrity of the 10/100/1000BASE-T signaling path.
Do not treat a shared Broadcom family description as proof that every ordering suffix is automatically interchangeable. Before substitution, compare the BCM5461SA1IPF ordering code against the candidate for temperature grade, package code, reel or tray format, qualification status, pin and ball compatibility, and lifecycle status. Install the exact manufacturer footprint and verify the host interface voltage and clocking arrangement in the datasheet.
合規資訊
The available product records do not provide definitive compliance statements for this exact MPN. Confirm RoHS, REACH, lead-free, halogen-free, and conflict-minerals status using the current Broadcom product declaration.