BCM5892PD0KFBG - 400MHz Broadcom Networking SoC | Broadcom
Артикул: BCM5892PD0KFBG ✓ АктивенBCM5892PD0KFBG Обзор
A system-on-chip, or SoC, is an integrated circuit that combines a processing core with memory interfaces, communications peripherals, and application-specific logic on a single die. Within the semiconductor hierarchy, BCM5892PD0KFBG belongs to the networking-module SoC family. This integration reduces the number of external components required by a customer equipment design, simplifies board-level routing, and creates a centralized platform for data-processing and line-interface functions.
The manufacturer listing identifies the device as a BCM5892 networking module operating at 400 MHz. Its production configuration uses copper wirebond, a construction commonly selected for cost-sensitive, high-volume telecommunications equipment where reliability and repeatable electrical performance are important. The exact package dimensions, pin assignments, I/O organization, memory interfaces, operating voltages, and thermal limits should be established from the manufacturer pin-description table before schematic capture or PCB layout.
BCM5892PD0KFBG is intended for manufacturers of DSL-related networking modules and other equipment requiring a dedicated broadband communications controller. At 400 MHz, the integrated processing platform provides a defined computational base for protocol handling, control-plane tasks, and data-path functions. System partitioning can influence overall performance, so a complete design should account for PHY selection, line-card signaling, memory type, firmware workload, and the required sustained data throughput.
Typical applications include central-office DSL equipment, customer-premises networking hardware, broadband aggregation systems, and vendor-specific line cards. The device can also support embedded network-access designs when the required interfaces, memory configuration, regulatory constraints, and thermal envelope are compatible. Its value is strongest in a controlled production environment where the manufacturer validates the complete module and its software.
A key design consideration is that BCM5892 is a specialized communications SoC rather than a general-purpose processor. Use the manufacturer reference schematic, application information, and pin-description table to define power rails, clocks, memory, PHY connections, and programming interfaces. Confirm multilayer PCB stack-up and controlled-impedance routing before layout, particularly for high-speed digital and communications signals.
This product page combines the confirmed 400 MHz and copper-wirebond identifiers, practical networking-module use cases, drop-in comparison guidance, and PCB-oriented implementation notes. It is designed to help engineers determine whether the BCM5892PD0KFBG matches the required package, electrical limits, interfaces, lifecycle status, and production configuration before committing a new design.
Аналоги без доработки для BCM5892PD0KFBG — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.
Варианты в этой серии
Модели той же серии, совместимые без доработки с BCM5892PD0KFBG (тот же форм-фактор и посадочное место).
BCM5892PC0KFBG
✅ Прямая заменаУточнить цену
Открыть даташит →BCM5892PD0KFBG Максимальные параметры и электрические характеристики
| Device Type | Networking system-on-chip (SoC) |
| Processor Frequency | 400 MHz |
| Product Family | BCM5892 |
| Copper Wirebond Construction | Cu wirebond |
| Configuration | Production configuration |
| Максимальная тактовая частота | 400 MHz |
Руководство по цоколевке BCM5892PD0KFBG в корпусе standard
Цоколевка для BCM5892PD0KFBG (корпус standard). Этот аналоговый компонент имеет выводы входа, выхода и питания. Обратитесь к техническому описанию производителя для конфигураций выводов балансировки нуля, коррекции и разрешения. Идеально подходит для схем обработки сигналов и усилителей.
Нет подробных данных о распиновке для BCM5892PD0KFBG.
Обратитесь к даташиту для полной конфигурации выводов.
Типичное применение
BCM5892PD0KFBG подходит для 6 применениеs: Central-Office DSL Equipment, Customer-Premises Networking Module, Broadband Aggregation Equipment, Industrial Network-Access Terminal, Carrier Ethernet Access Card, Telecommunications Line Interface.
Central-Office DSL Equipment
BCM5892PD0KFBG fits a central-office DSL line-card architecture where one integrated communications controller can manage protocol processing, control functions, and external line-interface circuitry. Its confirmed 400 MHz operating frequency provides the processor baseline for networking workloads, while copper-wirebond construction supports cost-controlled production of high-volume telecommunications equipment. The integration reduces the number of external controller and interface components required around the line path. Final suitability depends on matching the exact line interface, memory requirements, clocking, and supported PHY configuration to the product specification. Use the manufacturer reference design and electrical tables before assigning power rails or routing high-speed signals.
Рекомендуется
Customer-Premises Networking Module
BCM5892PD0KFBG can serve as the communications engine in a customer-premises router, DSL gateway, or integrated network-access module. The 400 MHz BCM5892 processor provides a defined platform for packet handling, management protocols, and control of communications peripherals without requiring a separate general-purpose processor for every task. Consolidation can simplify the enclosure and reduce board area, although it also concentrates firmware and thermal responsibilities in one device. Designers should verify the supported memory configuration, interface count, firmware model, and line-termination requirements against the manufacturer documentation. A controlled prototype should confirm boot behavior, clock margins, sustained throughput, and recovery behavior before production release.
Рекомендуется
Broadband Aggregation Equipment
BCM5892PD0KFBG is appropriate for a broadband aggregation card that must combine subscriber-line processing with network-facing control or switching functions. Its confirmed 400 MHz operation supports the device's networking-module role, while the integrated SoC architecture can reduce the number of separate interface controllers on a densely populated line card. The principal engineering constraints are sustained data throughput, external memory bandwidth, thermal dissipation, and synchronization with adjacent PHYs. Use the exact manufacturer ordering information to confirm the production silicon revision and supported interface matrix. Layout should preserve controlled-impedance paths between the SoC, memory, clock sources, and communications components while providing multiple thermal paths from the KFBG package.
Рекомендуется
Industrial Network-Access Terminal
BCM5892PD0KFBG can be evaluated for an industrial network-access terminal that combines broadband connectivity with local control and management functions. The 400 MHz SoC platform offers a compact way to implement communications protocol handling and embedded control in a single package, allowing the terminal to reduce component count while preserving a dedicated networking architecture. Suitability depends on temperature range, EMC design, firmware support, and whether the required industrial interfaces are exposed by the exact device variant. Confirm those attributes in the manufacturer datasheet and ordering table. For production, include worst-case line noise, power-supply tolerance, watchdog behavior, and recovery tests rather than validating only nominal laboratory conditions.
Рекомендуется
Carrier Ethernet Access Card
BCM5892PD0KFBG can be considered for an access card that bridges a physical broadband line to an Ethernet-facing network subsystem. Its confirmed 400 MHz BCM5892 networking operation and copper-wirebond production construction make it relevant to cost-sensitive, repeatable telecommunications hardware. The SoC should be assigned only after confirming that its supported PHY interfaces, serial links, memory, and protocol firmware align with the card architecture. Pay particular attention to latency, packet throughput, clock synchronization, and line-card power budget. The reference schematic should be used to derive layer stack-up and component placement, with short return paths maintained beneath high-speed interfaces and sensitive communications circuitry.
Рекомендуется
Telecommunications Line Interface
BCM5892PD0KFBG can function as the controlling element in a telecommunications line-interface module where protocol handling, configuration, and external PHY control must be handled locally. Its confirmed 400 MHz processor frequency supports network-control workloads, and the integrated SoC approach can reduce board complexity compared with a discrete processor and supporting logic. Selection must remain conditional on the exact device supporting the required DSL or line interface and its associated clocking and firmware model. Validate signal integrity, isolation boundaries, surge exposure, and EMC performance at the module interface. Production documentation should also establish how the KFBG package is soldered, inspected, and thermally coupled according to the manufacturer's assembly guidance.
Рекомендуется
Сводка рекомендуемых товаров
Справочные инженерные данные для BCM5892PD0KFBG — сравнение, рекомендации по проектированию и информация о соответствии.
Руководство по выбору
Сравнение с аналогами
| Параметр | Этот товар | BCM5892PC0KFBG |
|---|---|---|
| Brand | Broadcom | Broadcom |
| Package | KFBG | KFBG |
| Device Category | Networking system-on-chip (SoC) | Microprocessor IC |
| Product Family | BCM5892 | BCM5892 |
| Ordering Identifier | PD0KFBG | PC0KFBG |
Ключевые отличия
- Exact MPN is identified as a networking SoC (против BCM5892PC0KFBG)
- Confirmed processor operating frequency (против BCM5892PC0KFBG)
- Copper-wirebond production construction (против BCM5892PC0KFBG)
Заметки по проектированию
Use the manufacturer reference schematic and package drawing to place the BCM5892PD0KFBG before assigning power, clock, memory, and communications nets. Place decoupling capacitors at the relevant supply pins with very short ground returns, and route high-speed links over a continuous reference plane. Do not infer terminal functions from the KFBG ordering code; cross-check every PCB pad against the pin-description table to prevent routing errors.
Estimated thermal demand equals the sum of each rail's measured current multiplied by its rail voltage, plus the power dissipated by associated PHY and memory circuitry. Begin with the manufacturer's recommended PCB copper and airflow assumptions, then calculate the junction-temperature rise using the package thermal model. Validate the final estimate in the assembled enclosure because adjacent regulators, clock circuitry, and a restricted airflow path can raise the temperature beyond board-level expectations.
The confirmed 400 MHz processor frequency does not define every interface rate, so each high-speed net must be evaluated using the actual clock, edge rate, topology, and datasheet timing limits. Maintain a continuous return path, use the recommended layer transitions, and control impedance on the manufacturer reference board. Keep switching regulators, clocks, and high-current PHY supplies arranged to minimize coupling into sensitive communications lines, especially near connector and magnetics isolation regions.
Информация о соответствии
The BCM5892PD0KFBG product record identifies a communications SoC rather than an automotive-qualified device. Specific RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations require confirmation from the manufacturer or current product documentation.