Broadcom

BCM5892PD0KFBG - 400MHz Broadcom Networking SoC | Broadcom

MPN: BCM5892PD0KFBG ✓ Nakahanda
400 MHz Speed
MOQ: 1 |

BCM5892PD0KFBG Ulas

The Broadcom BCM5892PD0KFBG is a 400 MHz Broadcom system-on-chip for networking-module applications, supplied in a copper-wirebond production configuration under the KFBG ordering code. It integrates the processing, interface, and communications functions required by broadband equipment manufacturers while consolidating multiple discrete components into one semiconductor package.

A system-on-chip, or SoC, is an integrated circuit that combines a processing core with memory interfaces, communications peripherals, and application-specific logic on a single die. Within the semiconductor hierarchy, BCM5892PD0KFBG belongs to the networking-module SoC family. This integration reduces the number of external components required by a customer equipment design, simplifies board-level routing, and creates a centralized platform for data-processing and line-interface functions.

The manufacturer listing identifies the device as a BCM5892 networking module operating at 400 MHz. Its production configuration uses copper wirebond, a construction commonly selected for cost-sensitive, high-volume telecommunications equipment where reliability and repeatable electrical performance are important. The exact package dimensions, pin assignments, I/O organization, memory interfaces, operating voltages, and thermal limits should be established from the manufacturer pin-description table before schematic capture or PCB layout.

BCM5892PD0KFBG is intended for manufacturers of DSL-related networking modules and other equipment requiring a dedicated broadband communications controller. At 400 MHz, the integrated processing platform provides a defined computational base for protocol handling, control-plane tasks, and data-path functions. System partitioning can influence overall performance, so a complete design should account for PHY selection, line-card signaling, memory type, firmware workload, and the required sustained data throughput.

Typical applications include central-office DSL equipment, customer-premises networking hardware, broadband aggregation systems, and vendor-specific line cards. The device can also support embedded network-access designs when the required interfaces, memory configuration, regulatory constraints, and thermal envelope are compatible. Its value is strongest in a controlled production environment where the manufacturer validates the complete module and its software.

A key design consideration is that BCM5892 is a specialized communications SoC rather than a general-purpose processor. Use the manufacturer reference schematic, application information, and pin-description table to define power rails, clocks, memory, PHY connections, and programming interfaces. Confirm multilayer PCB stack-up and controlled-impedance routing before layout, particularly for high-speed digital and communications signals.

This product page combines the confirmed 400 MHz and copper-wirebond identifiers, practical networking-module use cases, drop-in comparison guidance, and PCB-oriented implementation notes. It is designed to help engineers determine whether the BCM5892PD0KFBG matches the required package, electrical limits, interfaces, lifecycle status, and production configuration before committing a new design.

Mga alternatibo na pwedeng ilagay na BCM5892PD0KFBG — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.

Variante sa Seri na ito

Katulad na modelo sa serye na katugma sa pagpasok BCM5892PD0KFBG (parehas na form factor at footprint).

BCM5892PC0KFBG

✅ Drop-In
Broadcom
📦 KFBG
Single-chip secure applications processor SoC · ARM11 CPU · Network controller and processor IC · Broadcom Limited · BGA · PCB surface mount · BCM5892PC0KFBG

Magkontak para sa presyo

Tingnan ang Datasheet →

BCM5892PD0KFBG Mga Pinakamataas na Rating at Electrical Characteristics

Device Type Networking system-on-chip (SoC)
Processor Frequency 400 MHz
Product Family BCM5892
Copper Wirebond Construction Cu wirebond
Configuration Production configuration
Maksimum na Taktiko ng Oras 400 MHz

Gabay sa Pin Configuration ng BCM5892PD0KFBG standard

Pin configuration para sa BCM5892PD0KFBG (standard package). Ang analog component na ito ay may input, output, at power supply pins. Sumangguni sa datasheet ng manufacturer para sa offset null, compensation, at enable pin configurations. Perpekto para sa signal conditioning at amplifier circuits.

Pinout diagram ng standard package para sa BCM5892PD0KFBG

Wala ng detalyadong pinout data na magagamit para sa BCM5892PD0KFBG.

Sumangguni sa datasheet para sa buong pin configuration.

Tipikal na mga Gamit

BCM5892PD0KFBG ay nararapat para sa 6 aplikasyons: Central-Office DSL Equipment, Customer-Premises Networking Module, Broadband Aggregation Equipment, Industrial Network-Access Terminal, Carrier Ethernet Access Card, Telecommunications Line Interface.

🌐

Central-Office DSL Equipment

BCM5892PD0KFBG fits a central-office DSL line-card architecture where one integrated communications controller can manage protocol processing, control functions, and external line-interface circuitry. Its confirmed 400 MHz operating frequency provides the processor baseline for networking workloads, while copper-wirebond construction supports cost-controlled production of high-volume telecommunications equipment. The integration reduces the number of external controller and interface components required around the line path. Final suitability depends on matching the exact line interface, memory requirements, clocking, and supported PHY configuration to the product specification. Use the manufacturer reference design and electrical tables before assigning power rails or routing high-speed signals.

🌐

Customer-Premises Networking Module

BCM5892PD0KFBG can serve as the communications engine in a customer-premises router, DSL gateway, or integrated network-access module. The 400 MHz BCM5892 processor provides a defined platform for packet handling, management protocols, and control of communications peripherals without requiring a separate general-purpose processor for every task. Consolidation can simplify the enclosure and reduce board area, although it also concentrates firmware and thermal responsibilities in one device. Designers should verify the supported memory configuration, interface count, firmware model, and line-termination requirements against the manufacturer documentation. A controlled prototype should confirm boot behavior, clock margins, sustained throughput, and recovery behavior before production release.

🖥️

Broadband Aggregation Equipment

BCM5892PD0KFBG is appropriate for a broadband aggregation card that must combine subscriber-line processing with network-facing control or switching functions. Its confirmed 400 MHz operation supports the device's networking-module role, while the integrated SoC architecture can reduce the number of separate interface controllers on a densely populated line card. The principal engineering constraints are sustained data throughput, external memory bandwidth, thermal dissipation, and synchronization with adjacent PHYs. Use the exact manufacturer ordering information to confirm the production silicon revision and supported interface matrix. Layout should preserve controlled-impedance paths between the SoC, memory, clock sources, and communications components while providing multiple thermal paths from the KFBG package.

🏭

Industrial Network-Access Terminal

BCM5892PD0KFBG can be evaluated for an industrial network-access terminal that combines broadband connectivity with local control and management functions. The 400 MHz SoC platform offers a compact way to implement communications protocol handling and embedded control in a single package, allowing the terminal to reduce component count while preserving a dedicated networking architecture. Suitability depends on temperature range, EMC design, firmware support, and whether the required industrial interfaces are exposed by the exact device variant. Confirm those attributes in the manufacturer datasheet and ordering table. For production, include worst-case line noise, power-supply tolerance, watchdog behavior, and recovery tests rather than validating only nominal laboratory conditions.

🌐

Carrier Ethernet Access Card

BCM5892PD0KFBG can be considered for an access card that bridges a physical broadband line to an Ethernet-facing network subsystem. Its confirmed 400 MHz BCM5892 networking operation and copper-wirebond production construction make it relevant to cost-sensitive, repeatable telecommunications hardware. The SoC should be assigned only after confirming that its supported PHY interfaces, serial links, memory, and protocol firmware align with the card architecture. Pay particular attention to latency, packet throughput, clock synchronization, and line-card power budget. The reference schematic should be used to derive layer stack-up and component placement, with short return paths maintained beneath high-speed interfaces and sensitive communications circuitry.

🔧

Telecommunications Line Interface

BCM5892PD0KFBG can function as the controlling element in a telecommunications line-interface module where protocol handling, configuration, and external PHY control must be handled locally. Its confirmed 400 MHz processor frequency supports network-control workloads, and the integrated SoC approach can reduce board complexity compared with a discrete processor and supporting logic. Selection must remain conditional on the exact device supporting the required DSL or line interface and its associated clocking and firmware model. Validate signal integrity, isolation boundaries, surge exposure, and EMC performance at the module interface. Production documentation should also establish how the KFBG package is soldered, inspected, and thermally coupled according to the manufacturer's assembly guidance.

What is BCM5892PD0KFBG?
The BCM5892PD0KFBG is a Broadcom networking system-on-chip rated at 400 MHz and configured for copper-wirebond production. According to Broadcom product listings for the BCM5892 family, the device is intended for integrated networking-module designs. It consolidates communications processing and associated interface functions into one semiconductor, reducing the component count compared with a discrete processor-and-interface implementation.
What are the key specifications of BCM5892PD0KFBG?
The confirmed headline specifications of BCM5892PD0KFBG are a 400 MHz operating frequency, BCM5892 networking-SoC family membership, a production configuration, and copper-wirebond construction. According to the Broadcom product listing, these identifiers distinguish the device as a broadband communications controller rather than a general-purpose microprocessor. Package, memory, voltage, and pin details should be taken from the manufacturer datasheet and pin-description table.
Where can I download the BCM5892PD0KFBG datasheet PDF?
The BCM5892PD0KFBG datasheet should be obtained through Broadcom's product documentation or an authorized component-document portal. The available BCM5892 document index is located at https://www.datasheetarchive.com/?q=bcm5892. Before schematic release, use the manufacturer document to verify package drawings, electrical limits, pin names, memory requirements, interface timing, and recommended application circuits.
Where can I find the BCM5892PD0KFBG pinout?
The BCM5892PD0KFBG pinout is defined by the manufacturer pin-description table associated with the KFBG package. Do not assign PCB connections from the ordering code alone because the public product snippet does not expose individual terminal names. Use the package drawing and pin table to confirm power pins, grounds, clock inputs, communications interfaces, programming signals, and any exposed thermal or configuration terminals.
Is BCM5892PD0KFBG suitable for DSL networking equipment?
Yes, BCM5892PD0KFBG is suitable for selected DSL and broadband networking-module designs when the required interfaces and system configuration match the device. Broadcom identifies the BCM5892 family as a networking-module SoC operating at 400 MHz. Final qualification also depends on line-interface topology, supported PHY, memory, firmware, thermal performance, regulatory requirements, and the validated reference design.
What can replace BCM5892PD0KFBG?
A true drop-in replacement must use the same package, preserve the BCM5892 pin assignments, match the essential I/O and memory interfaces, and meet the system's throughput and timing requirements. The only documented same-family candidate identified for direct evaluation is BCM5892PC0KFBG, whose KFBG ordering code indicates the same package family but does not by itself prove complete functional equivalence. Firmware, silicon revision, and board-level compatibility must therefore be confirmed before substitution.
Is BCM5892PD0KFBG the same as BCM5892PC0KFBG?
BCM5892PD0KFBG and BCM5892PC0KFBG are not established as identical parts. Both use the KFBG ordering code, but the P-versus-D identifier may distinguish silicon revision, temperature grade, or another ordering option. According to distributor catalog entries, the PD0 device is categorized as a SoC and the PC0 device as a microprocessor. Confirm the manufacturer ordering table and complete datasheet before treating PC0 as a drop-in replacement.
BCM5892PD0KFBG vs BCM5892PC0KFBG - which is better for networking modules?
BCM5892PD0KFBG is the documented 400 MHz networking-module choice, while BCM5892PC0KFBG appears in the catalog as a related microprocessor variant. According to Broadcom-related distributor records, both carry the KFBG package code, but the available listing does not establish matching revision, qualification, or temperature attributes. Choose PD0 only after checking that its complete datasheet and ordering information satisfy the equipment specification.
When should I choose BCM5892PD0KFBG over BCM5892PC0KFBG?
Choose BCM5892PD0KFBG when the product specification identifies the PD0 ordering option and the manufacturer documentation confirms its electrical, interface, qualification, and lifecycle characteristics. Do not select it solely because both MPNs end in KFBG. The PC0 variant may represent a different silicon or ordering configuration, so a transition requires comparison of the manufacturer ordering information, pin descriptions, firmware support, and qualification records.
What is the BCM5892PD0KFBG processor frequency?
The BCM5892PD0KFBG processor frequency is 400 MHz. According to Broadcom product listings for the exact MPN, the BCM5892 is identified as a 400 MHz networking module with copper-wirebond construction. This frequency should be used for processor-clock planning, while actual signal and memory timing must be designed around the interface limits in the manufacturer datasheet.
How much power does BCM5892PD0KFBG dissipate?
Power dissipation for BCM5892PD0KFBG depends on supply voltage, processing activity, memory traffic, interface activity, ambient temperature, and PCB thermal resistance. The public product record does not state a single dissipation figure. Calculate the design estimate from measured or datasheet-based supply current, multiply it by the actual rail voltage, and compare the resulting junction temperature with the device's maximum rating under the intended operating condition.
Is BCM5892PD0KFBG in stock?
Inventory changes by seller, region, quantity, and production status, so no permanent stock claim should be made for BCM5892PD0KFBG. Use the Request a Quote form on this page to request current availability, minimum order quantity, and lead time for the exact KFBG ordering code. Provide the required quantity, delivery location, and target schedule so the supplier response reflects the intended production commitment.
What is the price of BCM5892PD0KFBG?
The current commercial price of BCM5892PD0KFBG depends on quantity, packaging, production allocation, and supplier terms. Use the Request a Quote form on this page for a unit-price response tied to the exact MPN BCM5892PD0KFBG. Include required quantities and any scheduled delivery information so the quotation reflects the intended order rather than an unqualified single-piece listing.
What is the lead time for BCM5892PD0KFBG?
The lead time for BCM5892PD0KFBG must be confirmed for the exact ordering code and requested quantity. Use the Request a Quote form on this page to request current production availability, minimum order quantity, and scheduling information. For equipment with a long qualification cycle, obtain written confirmation of the delivery plan before committing the design to a product-launch schedule.
Where can I buy BCM5892PD0KFBG online?
Buy BCM5892PD0KFBG by submitting the exact MPN through the Request a Quote form on this page. Include the required quantity, shipment destination, approved supplier requirements, and target date. This avoids ambiguity with related Broadcom MPNs such as BCM5892PC0KFBG and allows the quotation to reflect the exact KFBG production configuration, current lifecycle position, and agreed commercial terms.

Impormasyon ng Talumpati sa Engineering for BCM5892PD0KFBG — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.

Paunawang Hanapin

Select BCM5892PD0KFBG when the equipment specification identifies the Broadcom BCM5892 networking SoC, a 400 MHz processor, and the PD0KFBG production configuration. Its integrated architecture can reduce component count in DSL gateways, central-office line cards, broadband aggregation systems, and network-access terminals. Before layout, confirm the exact electrical limits, memory interface, communications ports, clocking, firmware support, qualification attributes, and lifecycle commitments in the manufacturer documentation. BCM5892PC0KFBG is the only same-package family candidate identified for evaluation, but its catalog classification differs and its key ratings are not confirmed. Treat it as a conditional replacement rather than an automatic interchange. No cross-brand drop-in equivalent is established. If either part cannot satisfy the required protocol, PHY, temperature, lifecycle, or qualification requirements, retain the existing architecture rather than forcing a package-compatible substitution.

Ikabit sa Mga Alternatibo

Parametro Ito ang Producto BCM5892PC0KFBG
Brand Broadcom Broadcom
Package KFBG KFBG
Device Category Networking system-on-chip (SoC) Microprocessor IC
Product Family BCM5892 BCM5892
Ordering Identifier PD0KFBG PC0KFBG

Pangunahing mga Pagkakaiba

  • Exact MPN is identified as a networking SoC (kumpara saBCM5892PC0KFBG)
  • Confirmed processor operating frequency (kumpara saBCM5892PC0KFBG)
  • Copper-wirebond production construction (kumpara saBCM5892PC0KFBG)

Talaan ng Disenyo

Use the manufacturer reference schematic and package drawing to place the BCM5892PD0KFBG before assigning power, clock, memory, and communications nets. Place decoupling capacitors at the relevant supply pins with very short ground returns, and route high-speed links over a continuous reference plane. Do not infer terminal functions from the KFBG ordering code; cross-check every PCB pad against the pin-description table to prevent routing errors.

Estimated thermal demand equals the sum of each rail's measured current multiplied by its rail voltage, plus the power dissipated by associated PHY and memory circuitry. Begin with the manufacturer's recommended PCB copper and airflow assumptions, then calculate the junction-temperature rise using the package thermal model. Validate the final estimate in the assembled enclosure because adjacent regulators, clock circuitry, and a restricted airflow path can raise the temperature beyond board-level expectations.

The confirmed 400 MHz processor frequency does not define every interface rate, so each high-speed net must be evaluated using the actual clock, edge rate, topology, and datasheet timing limits. Maintain a continuous return path, use the recommended layer transitions, and control impedance on the manufacturer reference board. Keep switching regulators, clocks, and high-current PHY supplies arranged to minimize coupling into sensitive communications lines, especially near connector and magnetics isolation regions.

Impormasyon ng Pagsunod sa Kautusan

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Walang Lead
Unknown
Walang Halogen
Unknown
Mga Conflict Mineral
Unknown

The BCM5892PD0KFBG product record identifies a communications SoC rather than an automotive-qualified device. Specific RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations require confirmation from the manufacturer or current product documentation.

Data napatotohanan sa: 2026-11-20 — impormasyon na pinatunayan at pinapatakbo ng pangkat ng engineering ng XAIPART's component engineering team

Kaugnay na Hanapin

BCM5892PD0KFBG BCM5892PD0KFBG datasheet BCM5892PD0KFBG datasheet pdf BCM5892PD0KFBG pinout BCM5892PD0KFBG specifications Broadcom BCM5892PD0KFBG BCM5892 400MHz networking SoC BCM5892PD0KFBG replacement BCM5892PD0KFBG equivalent BCM5892PD0KFBG vs BCM5892PC0KFBG BCM5892PD0KFBG price BCM5892PD0KFBG stock

Mga kaugnay na Mga Komponente at mga Tuntunin

Broadcom BCM5892PD0KFBG BCM5892PC0KFBG BCM5892 networking system-on-chip SoC networking module semiconductor integrated circuit microprocessor IC broadband communications controller 400 MHz processor copper wirebond KFBG package surface-mount semiconductor DSL equipment broadband aggregation customer-premises networking protocol processing Ethernet PHY controlled-impedance routing MSL 1 RoHS REACH
Mabilis na Tanggap na RFQ
Ihanda ang buong detalye — ang aming pangkalakal na koponan ay tutugon sa loob ng 24 oras
Numero ng Parte Mga Tagagawa Pakete QTY Target na Halaga Pinalawak
✓
Quote na inilabas!

Ating tumugon sa iyong email sa loob ng 24 oras

1
RFQ Naisumite
2
Received na ang Kwaliksik
3
Nai-order
4
Pagbabayad
5
Inihanda
6
Naihanda
Tingnan ang Detalye ng RFQ