BSP78HUMA1 - 42V 3A Smart Low-Side Switch | Infineon HITFET
Артикул: BSP78HUMA1 ✓ Активен| Кол-во | Цена за ед. | Итого |
|---|---|---|
| 1 | $1.91 | $1,91 |
| 10 | $1.62 | $16,20 |
| 100 | $1.18 | $118,00 |
| 500 | $0.95 | $475,00 |
| 1.000 | $0.75 | $750,00 |
| 3.000 | $0.62 | $1.860,00 |
BSP78HUMA1 Обзор
A low-side switch is a power switch that connects the load to ground while the high side of the load sits at the supply rail. Compared with high-side switches, low-side drivers simplify N-channel MOSFET drive because the source reference is at ground, but they cannot detect load-side ground faults and they share the chassis/board ground with the controller. BSP78HUMA1 belongs to the broader HITFET family of Infineon protected switches - devices positioned between discrete MOSFETs (which require external protection) and full high-side PROFET switches, and they serve automotive body-electronics, industrial 24 V systems, and any application that needs a robust, logic-controlled ground-referenced switch.
Key features include 4.5 V to 42 V operating supply range, logic-level input compatible with 3.3 V and 5 V microcontrollers, open-drain diagnostic output for fault feedback, very low standby current, and -40 °C to +150 °C operating junction temperature. The PG-SOT223-4 (TO-261-4) package with an exposed tab provides a low thermal resistance path to PCB copper, supporting sustained 3 A switching without external heatsinking in well-designed layouts.
Typical applications span automotive body controllers driving resistive, inductive, or lamp loads, industrial PLC outputs, 24 V solenoid and valve drivers, LED lighting modules, and any 12 V/24 V ground-referenced load that benefits from on-die protection. The device is drop-in compatible with the broader Infineon HITFET family in the same SOT-223 footprint.
When designing with the BSP78HUMA1, ensure the inductive load has a freewheeling path (clamp diode or TVS) and that the PCB tab is soldered to a sufficient copper pour to keep junction temperature within SOA. The diagnostic pin requires a pull-up resistor; floating it disables fault reporting.
This page consolidates distributor pricing, parametric cross-reference alternatives, and design notes that complement the manufacturer datasheet for engineers evaluating a 12 V/24 V protected low-side switch.
Аналоги без доработки для BSP78HUMA1 — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.
Варианты в этой серии
Модели той же серии, совместимые без доработки с BSP78HUMA1 (тот же форм-фактор и посадочное место) — отличается по Package, AEC-Q100 Qualification, Continuous Load Current, Diagnostic Output, Operating Temperature.
Инструмент быстрого сравнения — выберите альтернативные компоненты для сравнения бок о бок:
BSP75N
✅ Прямая замена ⚠️ Характеристики не проверены📋 Справочный аналог (нет в каталоге)
BTS3050EJ
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
BTS452RATMA1
✅ Прямая замена✓ В наличии
$0.85 / шт.
Открыть даташит →ITS4142NHUMA1
✅ Прямая замена✓ В наличии
$0.88 / шт.
Открыть даташит →BTS452RATMA1
✅ Прямая замена✓ В наличии
$0.85 / шт.
Открыть даташит →BSP88H6327XTSA1
✅ Прямая замена✓ В наличии
$0.21 / шт.
Открыть даташит →BSP78HUMA1 Максимальные параметры и электрические характеристики
| Technology | Smart SIPMOS (N-channel vertical power FET) |
| Функция | Self-protected low-side power switch |
| Operating Supply Voltage (Vbb) | 4.5 V to 42 V |
| Continuous Load Current | Up to 3 A |
| On-state Resistance (Rds(on)) | 200 mΩ typical |
| Input Logic Level | Logic-level (3.3 V / 5 V compatible) |
| Current Limitation | Yes (internal) |
| Тепловая защита | Yes (with auto-restart) |
| Overvoltage Protection | Yes (load-dump tolerant) |
| Short-circuit Protection | Yes |
| Overload Protection | Yes |
| ESD Protection | Yes (on input pin) |
| Diagnostic Output | Open-drain status flag |
| Рабочая температура перехода | -40 °C to +150 °C |
| Корпус | PG-SOT223-4 (TO-261-4) with exposed tab |
| Тип монтажа | Surface Mount |
| AEC-Q100 Qualification | Qualified |
| Статус RoHS | Compliant (Green product) |
Конфигурация выводов BSP78HUMA1
| Контакт 1 | IN — Logic-level input (3.3 V / 5 V CMOS compatible) |
| Контакт 2 | GND — Ground / source connection (also tied to tab) |
| Контакт 3 | Vbb — Supply / battery voltage (4.5 V to 42 V) |
| Контакт 4 | STATUS — Open-drain diagnostic output (fault flag) |
Типичное применение
BSP78HUMA1 подходит для 6 применениеs: Automotive Body Control Module (BCM) Outputs, Industrial 24V Solenoid and Valve Drivers, Automotive LED Lighting Modules, Relay and Contactor Replacement, Heating Element Control (Seat Heaters, Mirror Heaters), DC Motor Direction Control (Low-Side Half-Bridge).
Automotive Body Control Module (BCM) Outputs
The BSP78HUMA1 is purpose-built for automotive BCM outputs driving 12 V resistive and inductive loads such as door lock actuators, mirror heaters, and small lamp clusters. Its 42 V load-dump tolerance handles ISO 7637-2 transient pulses without external TVS clamps, and 200 mΩ Rds(on) at 3 A keeps conduction loss around 1.8 W - manageable on a 1 sq-in copper pour. AEC-Q100 qualification allows direct use under the hood and inside cabin modules.
Рекомендуется
Industrial 24V Solenoid and Valve Drivers
Industrial PLCs and process controllers use the BSP78HUMA1 to switch 24 V solenoid valves, pneumatic actuators, and hydraulic valves directly from a 3.3 V or 5 V logic output. Its integrated current limit protects against stalled actuators, and thermal shutdown with auto-restart prevents latch-up faults. The 42 V maximum gives margin over the 24 V nominal rail plus inductive flyback transients; designers should still add a TVS or flyback diode across the coil for reliability.
Рекомендуется
Automotive LED Lighting Modules
The BSP78HUMA1 drives interior and exterior LED strings in 12 V automotive lighting - reading lamps, ambient strips, and turn-signal indicator LEDs. Logic-level input connects directly to an LED-driver MCU GPIO, eliminating external gate drive. Current-limit protection guards against LED short-to-ground faults, and the 200 mΩ Rds(on) minimizes thermal rise in the compact SOT-223 footprint. PWM dimming is supported via the IN pin at frequencies up to several kHz.
Рекомендуется
Relay and Contactor Replacement
In modern automotive and industrial designs, the BSP78HUMA1 replaces electromechanical relays with silent, bounce-free solid-state switching for loads up to 3 A. Compared with a 12 V automotive relay (~50 mA coil current, mechanical wear, EMI from contact arcing), the BSP78HUMA1 draws negligible input current, has no moving parts, and offers diagnostic feedback via the STATUS pin for fault detection.
Рекомендуется
Heating Element Control (Seat Heaters, Mirror Heaters)
Resistive heating loads such as automotive seat heaters, mirror heaters, and rear-window defroster segments are ideal for the BSP78HUMA1. Continuous 3 A capability handles multi-amp heating elements; PWM input allows proportional temperature control. Internal thermal shutdown protects against blocked airflow or short-circuit faults, and the open-drain STATUS pin signals MCU for fail-safe shutoff. The exposed tab simplifies thermal management on the PCB.
Рекомендуется
DC Motor Direction Control (Low-Side Half-Bridge)
Two BSP78HUMA1 devices in a low-side half-bridge configuration drive small DC motors in reversible applications such as automotive mirror adjusters, door lock motors, and HVAC blend-door actuators. Each device handles the inductive flyback independently via its internal protections. Logic-level inputs interface directly to an H-bridge controller or MCU GPIO pair. Alternative: use a dedicated full-bridge driver if PWM speed control is required.
Рекомендуется
Сводка рекомендуемых товаров
Справочные инженерные данные для BSP78HUMA1 — сравнение, рекомендации по проектированию и информация о соответствии.
Руководство по выбору
Сравнение с аналогами
| Параметр | Этот товар | BSP75N | BTS3050EJ | BTS452R | ITS4142NHUMA1 | BTS452RATMA1 | BSP88H6327XTSA1 |
|---|---|---|---|---|---|---|---|
| Brand | Infineon | Infineon | Infineon | Infineon | Infineon | Infineon | Infineon |
| Package | PG-SOT223-4 | PG-SOT223-4 - same | PG-SOT223-4 - same | PG-SOT223-4 - same | PG-SOT223-4 - same | PG-SOT223-4 - same | PG-SOT223-4 - same |
| Operating Voltage | 4.5 V to 42 V | 4.5 V to 42 V | 4.5 V to 42 V | 4.5 V to 42 V | 4.5 V to 42 V | 4.5 V to 42 V | 4.5 V to 42 V |
| Continuous Current | 3 A | 1.6 A | 3 A | 4 A (typical) | 1.4 A | 4 A (typical) | 0.5 A |
| Logic-Level Input | Yes (3.3 V / 5 V) | Yes | Yes | Yes | Yes | Yes | Yes |
| Diagnostic Output | Open-drain STATUS | Open-drain STATUS | Enhanced diagnostic | STATUS pin | STATUS pin | STATUS pin | STATUS pin |
| AEC-Q100 Qualified | Yes | Yes | Yes | Industrial | Yes | Yes | Yes |
| Thermal Shutdown | Yes (auto-restart) | Yes | Yes | Yes | Yes | Yes | Yes |
Ключевые отличия
- 3 A continuous current in compact SOT-223-4 with full protection set (против BSP75N)
- Better diagnostic granularity at similar price (против BTS3050EJ)
- Drop-in compatible within Infineon HITFET family (против BSP88H6327XTSA1)
Заметки по проектированию
Estimated: At 3 A continuous load with 200 mΩ Rds(on), the BSP78HUMA1 dissipates approximately 1.8 W. The PG-SOT223-4 has a junction-to-ambient thermal resistance around 60 C/W on a 1 sq-in 2 oz copper pour, giving a 108 C temperature rise above ambient. This stays inside the 150 C junction limit in typical automotive environments, but for sustained 3 A operation in enclosed modules, increase copper area to 2 sq-in minimum or derate to 2 A.
When switching inductive loads (solenoids, motors, relays) the BSP78HUMA1 low-side configuration means the collapsing magnetic field pulls the drain node BELOW ground - the part's 42 V rating is the maximum drain-to-source voltage, NOT the absolute maximum drain-to-ground. Always add a freewheeling diode across the inductive load or a TVS from drain to Vbb to clamp the flyback spike. Operating without a clamp can cause avalanche degradation of the internal N-channel FET.
Solder the PG-SOT223-4 exposed tab to a continuous copper pour on the PCB - this is the primary thermal path. Use multiple thermal vias under the tab to spread heat to internal ground planes. Place a 100 nF ceramic decoupling capacitor as close as possible to the Vbb pin to suppress supply transients, especially load-dump events. The STATUS pin requires an external pull-up resistor (typically 10 kΩ to MCU Vdd); floating it disables fault reporting.
Информация о соответствии
RoHS compliant (Green product per Infineon datasheet). AEC-Q100 qualified for automotive use. Lead-free and halogen-free per the manufacturer datasheet.
