onsemi

CD4520BCN - Dual 4-Bit Binary Up-Counter | onsemi

Артикул: CD4520BCN ✓ Активен
3 V to 15 V Vdss DIP Package
MOQ: 1 |

CD4520BCN Обзор

The onsemi CD4520BCN is a dual 4-bit binary up-counter with two independently clocked counting sections, an operating supply range of 3 V to 15 V, and a PDIP-16 through-hole package. Each counter uses positive-edge triggering and reaches a terminal count of 15 before rolling over to 0.

A CMOS binary counter is a sequential logic device that tracks a binary number from one clock event to the next. It belongs to the logic IC hierarchy: counter → binary counter → digital counter → logic IC → semiconductor. The CD4520BCN contains two identical 4-stage counters, allowing one package to provide independent counting channels or to implement a wider 8-bit counting arrangement when the sections are cascaded.

Key features include dual 4-bit up-counting, positive-edge triggering, a maximum count of 15 per section, and operation across a 3 V to 15 V supply range. Its internal counter stages are D-type flip-flops with interchangeable clock and enable lines, giving designers control over when counting advances and when the count is held. The device is offered in a 16-pin PDIP package for through-hole PCB assembly.

The CD4520BCN is designed for low-power digital control, timing, sequencing, and state-counting systems. Because its counter sections are independently synchronous, each section advances on the selected active clock edge when its enable condition is satisfied. Cascading the sections extends the count range beyond the native 4-bit capacity, while separate clock inputs permit two unrelated counters to share one package.

Typical uses include industrial timing modules, laboratory pulse counters, programmable-delay circuits, digital instrumentation, event-counting interfaces, and digital control systems. The device can also serve as a programmable binary divider when additional logic conditions the clock and enable inputs.

Designers should account for unused counter inputs, provide suitable bypassing around the power pins, and confirm that clock and reset waveforms satisfy the manufacturer’s timing requirements. Because the counter operates in the legacy CMOS 4000-series family, verify input levels and timing margins against the system supply voltage before using it with modern 3.3 V or 5 V logic.

This page combines the CD4520BCN’s key operating characteristics, package details, drop-in replacement analysis, application guidance, and practical design notes to support faster component selection and board-level implementation.

Аналоги без доработки для CD4520BCN — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.

Варианты в этой серии

Модели той же серии, совместимые без доработки с CD4520BCN (тот же форм-фактор и посадочное место) — отличается по Logic Family, Mounting Type, Output Type, Package, Supply Voltage Range.

Harris Corporation
Logic Family: CMOS
Mounting Type: Surface mount
Output Type: Bidirectional
Сравнить с CD4520BCN →

CD4520BCE

✅ Прямая замена
📦 PDIP-16
Same dual 4-bit binary up-counter function; suffix and temperature-grade details must be checked, with no confirmed electrical change

📋 Справочный аналог (нет в каталоге)

CD4520BC

✅ Прямая замена
📦 PDIP-16
Same CD4520B counter family and 16-pin DIP format; grade suffix differs, with up to 10% temperature-grade variation possible

📋 Справочный аналог (нет в каталоге)

MC14520BCL

✅ Прямая замена
📦 PDIP-16
Equivalent dual 4-bit binary up-counter in a 16-pin DIP package; supplier and ordering suffix differ

📋 Справочный аналог (нет в каталоге)

MC14520B

✅ Прямая замена
📦 PDIP-16
Same 4000-series binary-counter function; package suffix and temperature-grade details may differ by up to 20%

📋 Справочный аналог (нет в каталоге)

CD4520BEE4

✅ Прямая замена
📦 PDIP-16
Same dual 4-bit binary up-counter function; ordering suffix differs and temperature-grade limits require confirmation

📋 Справочный аналог (нет в каталоге)

CD4520BD

✅ Прямая замена
Harris Corporation
📦 PDIP-16
Binary counter · 2 elements · 4 bits · Up · CMOS · 3 V to 18 V · 8 MHz · 80 ns

Уточнить цену

Открыть даташит →

CD4520BCN Максимальные параметры и электрические характеристики

Product Type Dual 4-bit binary up-counter
Number of Counter Sections 2 sections
Counter Resolution 4 bits per section
Internal Stage Count 4 stages per counter
Counting Direction Up counter
Triggering Edge Positive-edge triggered
Maximum Terminal Count 15 per section
Supply Voltage Range 3 V to 15 V
Тип выхода Binary counter outputs
Temperature Grade Industrial
Terminal Form Through-hole
Number of Terminals 16 terminals
Package Code DIP
Package Shape Rectangular
Корпус PDIP-16
Тип монтажа Through-hole
Logic Family 4000-series CMOS

Руководство по цоколевке CD4520BCN в корпусе pdip-16

Цоколевка для CD4520BCN (корпус pdip-16). Эта цифровая ИС включает выводы GPIO, интерфейсы связи (UART, SPI, I2C) и выводы питания. Обратитесь к техническому описанию производителя для альтернативных функций выводов и вариантов конфигурации. Необходимо для проектирования встраиваемых систем и трассировки печатных плат.

Схема цоколевки корпуса pdip-16 для CD4520BCN

Нет подробных данных о распиновке для CD4520BCN.

Обратитесь к даташиту для полной конфигурации выводов.

Типичное применение

CD4520BCN подходит для 6 применениеs: Industrial Pulse Counter, Programmable Timer and Delay, Digital Instrumentation, Digital Sequence Control, Laboratory Event Counter, Frequency Divider.

🏭

Industrial Pulse Counter

The CD4520BCN suits industrial pulse-counting modules because it provides two independent 4-bit counters, a 3 V to 15 V supply range, and positive-edge-triggered counting. Each section can count sensor-derived pulses up to 15 before rollover, allowing two event channels to share one 16-pin DIP package. Configure reset and enable inputs to establish a known starting state and prevent unwanted increments. The principal design consideration is edge cleanliness: switch bounce or asynchronous transitions near a clock edge can produce an incorrect count, so filtering and source synchronization may be required before the counter inputs.

⏱️

Programmable Timer and Delay

The CD4520BCN can implement a programmable timer when its clock is driven by a periodic reference and its count output is decoded by external logic. Two 4-bit sections allow parallel timing intervals or cascaded count ranges extending beyond 15 clock events. Positive-edge triggering makes clock polarity and source selection central to implementation. The counter’s maximum terminal count of 15 must be considered when defining the delay interval, while the enable and reset controls determine when timing begins and whether an output remains stable. A clean, jitter-controlled reference clock improves repeatability.

📟

Digital Instrumentation

The CD4520BCN is useful in digital instrumentation that counts test cycles, measurement intervals, or sequential test steps. Two independent 4-bit counting sections can handle separate measurement phases within a shared instrument while preserving a compact through-hole footprint. The 3 V to 15 V operating range allows use in legacy laboratory and industrial control systems, although the entire signal chain must use compatible logic levels. Designers should establish reset behavior at power-up, decode binary outputs for display or control, and avoid presenting an unverified pinout assumption to the PCB layout.

🧩

Digital Sequence Control

The CD4520BCN can form part of a repeatable digital sequence controller by counting command or timing events and decoding the four binary outputs into discrete states. One section can track a primary sequence while the second counts a related phase or provides a rollover event. Its industrial temperature grade and positive-edge clocking support control systems operating across conventional CMOS supply voltages. The design must prevent illegal counter states through reset logic, and output decoding should use non-overlapping states. Cascading is useful when the required sequence length exceeds the native 16-count range.

🔬

Laboratory Event Counter

The CD4520BCN is appropriate for a laboratory event counter requiring two compact, independently clocked binary count channels. It can count experiment cycles, actuator movements, or logic-generated test events while retaining four-bit state information for downstream display or control. The PDIP-16 package simplifies through-hole prototyping and repair. For accurate results, the event source should present clean transitions, reset should be asserted long enough to initialize both sections, and the maximum count of 15 per channel must be included in the readout or rollover logic. Cascading provides additional range when the application requires it.

📡

Frequency Divider

The CD4520BCN can function as a programmable frequency divider by driving its clock with the signal to be divided and decoding a selected count output. The 4-bit counter provides eight divide ratios from 2 through 16, and cascading its two sections extends the selectable range. Positive-edge triggering helps define the relationship between source transitions and count advancement. Designers must account for propagation delay, reset timing, and any counter enable behavior when cascading sections. Because the device is a legacy CMOS logic part, the divider should remain within the manufacturer’s stated supply and input-level limits.

What is the CD4520BCN and what does it do?
The CD4520BCN is a dual 4-bit binary up-counter that provides two independently clocked 4-stage counting sections in a 16-pin PDIP package. According to the manufacturer datasheet, the counter stages are D-type flip-flops with interchangeable clock and enable lines, and counting advances on the positive-going clock edge.
What is the operating voltage of the CD4520BCN?
The CD4520BCN operates from 3 V to 15 V. This range supports both 5 V and 15 V CMOS logic systems, although designers must confirm input thresholds and timing margins at each operating voltage before connecting the counter to a particular system.
How many bits can the CD4520BCN count?
Each counter section in the CD4520BCN counts 4 binary bits and reaches a terminal count of 15 before rolling over. The package contains two such sections, which can be cascaded when an extended count range or an 8-bit counting arrangement is required.
What is the CD4520BCN pinout?
The CD4520BCN uses a 16-pin PDIP package with through-hole terminals. Use the manufacturer datasheet pin-description table and package drawing to assign clock, enable, reset, binary-output, and supply connections, and verify every connection against the exact pin numbering before fabrication.
Where can I download the CD4520BCN datasheet PDF?
The CD4520BCN datasheet can be accessed through the manufacturer product documentation and the linked manufacturer PDF listing for the CD4520 family. The PDF describes the dual binary counter architecture, operating limits, timing characteristics, pin functions, and recommended application conditions.
Can the two counters in the CD4520BCN operate independently?
Yes, the CD4520BCN contains two identical counter sections with interchangeable clock and enable lines, allowing independent operation. Each section can count separately, or the output of one section can be connected to the clock input of the other to extend the counting range.
Where can I buy CD4520BCN and check current availability?
Use the Request a Quote form on this page to request current CD4520BCN availability, MOQ, lead time, and a quotation. The form routes the request without embedding a static price that could become outdated, and it is the appropriate channel for production and prototype quantities.
What is the current price of CD4520BCN?
Current pricing for CD4520BCN is best obtained through the Request a Quote form on this page. Submit the required quantity, package, and shipment details so the quote reflects current market availability, volume, and delivery requirements without relying on a stale catalog figure.
What is the lead time for CD4520BCN?
The CD4520BCN lead time depends on the requested quantity and current supplier inventory. Use the Request a Quote form on this page to request a production-ready lead-time confirmation for your exact quantity, shipment destination, and target schedule.
Is CD4520BCN in stock?
Current CD4520BCN stock status should be confirmed through the Request a Quote form on this page because availability can change with production and order volume. Include your required date and quantity so the returned quotation can reflect an actionable supply commitment.
What is the best drop-in replacement for CD4520BCN?
CD4520BCN-compatible alternatives include CD4520BCE and MC14520BCL when their temperature grade, pinout, and operating ratings match the installation. According to the cross-reference information, both implement the same dual 4-bit binary up-counter function, but an engineer must verify exact pin compatibility before approving a substitution.
Can MC14520BCL replace CD4520BCN without changing the PCB?
MC14520BCL can serve as a direct functional alternative to CD4520BCN when both devices are installed in compatible 16-pin DIP positions and share the required clock, enable, reset, supply, and output behavior. Verify the manufacturer pin diagrams and operating limits rather than relying on the shared 4000-series function alone.
What is the best onsemi equivalent for CD4520BCN?
The onsemi CD4520BCE is a close functional alternative to CD4520BCN and is identified in the CD4520BCN cross-reference information. Because the target is specified as an industrial-temperature PDIP-16 part, compare the exact temperature grade, suffix, and pin configuration before treating the alternate suffix as a drop-in replacement.
CD4520BCN vs CD4520BEE4: which counter should I choose?
CD4520BCN and CD4520BEE4 both implement the CD4520B dual 4-bit binary up-counter function, but their suffix codes indicate different ordering and grade configurations. Choose CD4520BEE4 only after confirming that its package, temperature grade, lifecycle status, and pin configuration satisfy the target design.
When should I choose CD4520BCN instead of a CD4520B alternative?
Choose CD4520BCN when an industrial-grade 16-pin PDIP counter is required and the original manufacturer’s part designation is preferable for documentation or qualification continuity. Select an alternative only when its exact suffix provides a verified pin-compatible, electrically compatible, and lifecycle-appropriate substitute for the installed circuit.
Is CD4520BCN suitable for industrial timing and counting systems?
Yes, CD4520BCN is identified as an industrial-grade, dual 4-bit binary up-counter suitable for industrial timing, sequencing, and event-counting designs. Its 3 V to 15 V operating range and positive-edge-triggered 4-stage counters support conventional CMOS control logic when clock and reset timing are properly designed.

Справочные инженерные данные для CD4520BCN — сравнение, рекомендации по проектированию и информация о соответствии.

Руководство по выбору

Choose CD4520BCN for industrial through-hole designs that require two independent, positive-edge-triggered 4-bit binary up-counters in a 3 V to 15 V system. Its 16-pin PDIP format supports repairable legacy equipment, prototypes, and control boards where binary modulo-16 counting or cascading is needed. Consider CD4520BCE or CD4520BC when an onsemi CD4520-family alternative is acceptable, but verify the temperature-grade and suffix differences. MC14520BCL is useful when its manufacturer qualification and sourcing conditions fit the design. For mixed counter requirements, evaluate SN74LS93DR for binary counting or SN74LS90DR for decade counting rather than assuming either has the same dual-counter architecture.

Сравнение с аналогами

Параметр Этот товар CD4520BCN CD4520BCE CD4520BC MC14520BCL CD4520BEE4 CD4520B
Brand onsemi onsemi onsemi onsemi onsemi Texas Instruments Texas Instruments
Package PDIP-16 PDIP-16 PDIP-16 PDIP-16 PDIP-16 PDIP-16 PDIP-16
Counter Type Dual 4-bit binary up-counter Dual 4-bit binary up-counter Dual 4-bit binary up-counter Dual 4-bit binary up-counter Dual 4-bit binary up-counter Dual 4-bit binary up-counter Dual 4-bit binary up-counter
Number of Counter Sections 2 sections 2 sections 2 sections 2 sections 2 sections 2 sections 2 sections
Counter Resolution 4 bits per section 4 bits per section 4 bits per section 4 bits per section 4 bits per section 4 bits per section 4 bits per section
Maximum Terminal Count 15 per section 15 per section 15 per section 15 per section 15 per section 15 per section 15 per section
Triggering Edge Positive-edge triggered Positive-edge triggered Positive-edge triggered Positive-edge triggered Positive-edge triggered Positive-edge triggered Positive-edge triggered
Mounting Type Through-hole Through-hole Through-hole Through-hole Through-hole Through-hole Through-hole

Ключевые отличия

  • Two independent counting sections in one package (против SN74LS93DR)
  • Broad CMOS supply range (против CD4520BEE4)
  • Native 4-bit terminal count (против SN74LS90DR)

Заметки по проектированию

Treat clock, enable, and reset inputs as synchronous control signals. Hold reset for the interval required by the manufacturer’s timing diagram, and do not allow clock edges to occur near a reset transition. A clean reset release reduces the chance that the counter advances into an unintended state. When a noisy switch or sensor drives the clock, add filtering or synchronization before the input; otherwise contact bounce can be interpreted as multiple count events.

Place the bypass capacitor close to the device supply pins and route ground returns directly to the device ground pins. Keep clock traces away from switching nodes and output traces that change rapidly at count rollover. Because this is a through-hole PDIP device, verify the physical pin orientation, row spacing, and pin numbering against the package drawing before inserting it into the board.

Do not assume the two sections are automatically cascaded: each counter requires the correct connection between its own clock, enable, reset, and output pins. Confirm whether counting should advance on the selected positive edge and whether the enable input is active high or low for the selected configuration. Also account for the 4-bit rollover from 15 to 0 in software, decoding logic, and any downstream interrupt scheme.

Информация о соответствии

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Без свинца
Unknown
Без галогенов
Unknown
Конфликтные минералы
Unknown

The component is identified as an industrial-grade logic IC. RoHS, REACH, lead-free, halogen-free, and conflict-minerals status require confirmation from the current manufacturer product documentation.

Данные проверены: 2026-11-19 — данные проверены и курируются командой компонентной инженерии XAIPART

Похожие запросы

cd4520b datasheet CD4520BCN datasheet CD4520BCN datasheet pdf CD4520BCN pinout onsemi CD4520BCN CD4520BCN PDIP-16 CD4520BCN dual binary counter CD4520BCN equivalent CD4520BCN replacement CD4520BCN vs CD4520BEE4 CD4520BCN price CD4520BCN stock

Связанные компоненты & термины

onsemi CD4520BCN CD4520B CD4520BCN CD4520BCE CD4520BC MC14520BCL MC14520B CD4520BEE4 binary counter digital counter logic IC CMOS 4000-series logic positive-edge triggered 4-bit counter PDIP-16 DIP package through-hole industrial temperature grade supply voltage counter cascading frequency divider industrial timing digital instrumentation
Быстрый запрос цены (RFQ)
Заполните все данные — наша команда продаж ответит в течение 24 часов
Артикул Производитель Корпус QTY Целевая цена Итого
✓
Запрос цены отправлен!

Мы ответим на ваш email в течение 24 часов

1
RFQ отправлен
2
Предложение получено
3
Заказ оформлен
4
Оплата
5
Отправлено
6
Доставлено
Просмотреть детали RFQ