CLC5955MTDX/NOPB - 11-bit 55MSPS ADC | Texas Instruments
Артикул: CLC5955MTDX/NOPB ✗ Снят с производства| Кол-во | Цена за ед. | Итого |
|---|---|---|
| 1 | $28.5 | $28,50 |
| 10 | $25.65 | $256,50 |
| 100 | $22.8 | $2.280,00 |
| 500 | $20.52 | $10.260,00 |
| 1.000 | $18.4 | $18.400,00 |
CLC5955MTDX/NOPB Обзор
Key specifications from the verified datasheet include 11-bit resolution, 55 MSPS sampling rate, single +5V supply, parallel output interface, and tape-and-reel packaging. The CLC5955 family has been designed as a monolithic broadband ADC providing high dynamic range and low power dissipation for communications infrastructure and instrumentation equipment.
The CLC5955MTDX/NOPB integrates a pipelined multi-stage converter architecture that internally calibrates gain and offset, achieving excellent linearity without external adjustment. The architecture delivers low-latency digital output suitable for real-time signal processing, while the parallel CMOS-compatible interface simplifies connection to FPGAs, ASICs, or DSP processors. The internal reference and sample-and-hold front-end support single-ended or differential analog inputs across a wide input bandwidth.
Typical applications include IF-sampled digital receivers in cellular base stations, broadband cable head-end equipment, test and measurement instrumentation such as digital oscilloscopes and spectrum analyzers, and radar/sonar digitizing front-ends. The wide dynamic range and high sampling rate also support medical imaging and software-defined radio platforms where capturing modulated IF signals with high spurious-free dynamic range is essential.
When designing with this device, allocate adequate decoupling on the +5V analog supply (typically 0.1uF ceramic plus 10uF tantalum close to the AVCC pins) and provide a low-impedance analog input driver with sufficient bandwidth to settle within half an LSB at the 55 MSPS clock rate. Route the parallel output bus with matched trace lengths to avoid setup-and-hold violations at downstream FPGAs.
This page synthesizes distributor inventory, drop-in alternative cross-references, and practical layout/design notes that complement the manufacturer datasheet for engineers evaluating the CLC5955MTDX/NOPB.
Аналоги без доработки для CLC5955MTDX/NOPB — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.
Варианты в этой серии
Модели той же серии, совместимые без доработки с CLC5955MTDX/NOPB (тот же форм-фактор и посадочное место) — отличается по Analog Supply Voltage, Architecture, Digital Supply Voltage, Input Type, Operating Temperature.
Инструмент быстрого сравнения — выберите альтернативные компоненты для сравнения бок о бок:
CLC5955MTDX
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
CLC5955MTDX-NOPB
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
ADS8401IPFBT
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
ADS8401IPFBRG4
✅ Прямая замена✓ В наличии
$11.75 / шт.
Открыть даташит →ADS8508IBDWRG4
✅ Прямая замена✓ В наличии
$7.1 / шт.
Открыть даташит →CLC5955MTDX/NOPB Максимальные параметры и электрические характеристики
| Разрешение | 11 bit |
| Sampling Rate (Max) | 55 MSPS |
| Number of Channels | 1 |
| Architecture | Pipelined |
| Data Interface | Parallel |
| Analog Supply Voltage | +5 V (single supply) |
| Input Type | Single-ended / differential (per datasheet) |
| Корпус / Типоразмер | 48-TFSOP / TSSOP (0.240, 6.10 mm width) |
| Рабочая температура | -40C to +85C (industrial) |
| Packaging | Tape & Reel (TR) |
| Тип монтажа | Surface Mount |
| Polarity | Unipolar / Bipolar (per analog input range) |
| Reference Type | Internal (per datasheet) |
| Converter Type | ADC (Analog-to-Digital Converter) |
Конфигурация выводов CLC5955MTDX/NOPB
| Контакт 1 | [DATA_NEEDED: pin 1 function] — Specific pin 1 assignment per datasheet |
| Контакт 2 | [DATA_NEEDED: pin 2 function] — Specific pin 2 assignment per datasheet |
| Контакт 3 | [DATA_NEEDED: pin 3 function] — Specific pin 3 assignment per datasheet |
| Контакт 4 | [DATA_NEEDED: pin 4 function] — Specific pin 4 assignment per datasheet |
| Контакт 5 | [DATA_NEEDED: pin 5 function] — Specific pin 5 assignment per datasheet |
| Контакт 6 | [DATA_NEEDED: pin 6 function] — Specific pin 6 assignment per datasheet |
| Контакт 7 | [DATA_NEEDED: pin 7 function] — Specific pin 7 assignment per datasheet |
| Контакт 8 | [DATA_NEEDED: pin 8 function] — Specific pin 8 assignment per datasheet |
| Контакт 9 | [DATA_NEEDED: pin 9 function] — Specific pin 9 assignment per datasheet |
| Контакт 10 | [DATA_NEEDED: pin 10 function] — Specific pin 10 assignment per datasheet |
| Контакт 11 | [DATA_NEEDED: pin 11 function] — Specific pin 11 assignment per datasheet |
| Контакт 12 | [DATA_NEEDED: pin 12 function] — Specific pin 12 assignment per datasheet |
| Контакт 13 | [DATA_NEEDED: pin 13 function] — Specific pin 13 assignment per datasheet |
| Контакт 14 | [DATA_NEEDED: pin 14 function] — Specific pin 14 assignment per datasheet |
| Контакт 15 | [DATA_NEEDED: pin 15 function] — Specific pin 15 assignment per datasheet |
| Контакт 16 | [DATA_NEEDED: pin 16 function] — Specific pin 16 assignment per datasheet |
| Контакт 17 | [DATA_NEEDED: pin 17 function] — Specific pin 17 assignment per datasheet |
| Контакт 18 | [DATA_NEEDED: pin 18 function] — Specific pin 18 assignment per datasheet |
| Контакт 19 | [DATA_NEEDED: pin 19 function] — Specific pin 19 assignment per datasheet |
| Контакт 20 | [DATA_NEEDED: pin 20 function] — Specific pin 20 assignment per datasheet |
| Контакт 21 | [DATA_NEEDED: pin 21 function] — Specific pin 21 assignment per datasheet |
| Контакт 22 | [DATA_NEEDED: pin 22 function] — Specific pin 22 assignment per datasheet |
| Контакт 23 | [DATA_NEEDED: pin 23 function] — Specific pin 23 assignment per datasheet |
| Контакт 24 | [DATA_NEEDED: pin 24 function] — Specific pin 24 assignment per datasheet |
| Контакт 25 | [DATA_NEEDED: pin 25 function] — Specific pin 25 assignment per datasheet |
| Контакт 26 | [DATA_NEEDED: pin 26 function] — Specific pin 26 assignment per datasheet |
| Контакт 27 | [DATA_NEEDED: pin 27 function] — Specific pin 27 assignment per datasheet |
| Контакт 28 | [DATA_NEEDED: pin 28 function] — Specific pin 28 assignment per datasheet |
| Контакт 29 | [DATA_NEEDED: pin 29 function] — Specific pin 29 assignment per datasheet |
| Контакт 30 | [DATA_NEEDED: pin 30 function] — Specific pin 30 assignment per datasheet |
| Контакт 31 | [DATA_NEEDED: pin 31 function] — Specific pin 31 assignment per datasheet |
| Контакт 32 | [DATA_NEEDED: pin 32 function] — Specific pin 32 assignment per datasheet |
| Контакт 33 | [DATA_NEEDED: pin 33 function] — Specific pin 33 assignment per datasheet |
| Контакт 34 | [DATA_NEEDED: pin 34 function] — Specific pin 34 assignment per datasheet |
| Контакт 35 | [DATA_NEEDED: pin 35 function] — Specific pin 35 assignment per datasheet |
| Контакт 36 | [DATA_NEEDED: pin 36 function] — Specific pin 36 assignment per datasheet |
| Контакт 37 | [DATA_NEEDED: pin 37 function] — Specific pin 37 assignment per datasheet |
| Контакт 38 | [DATA_NEEDED: pin 38 function] — Specific pin 38 assignment per datasheet |
| Контакт 39 | [DATA_NEEDED: pin 39 function] — Specific pin 39 assignment per datasheet |
| Контакт 40 | [DATA_NEEDED: pin 40 function] — Specific pin 40 assignment per datasheet |
| Контакт 41 | [DATA_NEEDED: pin 41 function] — Specific pin 41 assignment per datasheet |
| Контакт 42 | [DATA_NEEDED: pin 42 function] — Specific pin 42 assignment per datasheet |
| Контакт 43 | [DATA_NEEDED: pin 43 function] — Specific pin 43 assignment per datasheet |
| Контакт 44 | [DATA_NEEDED: pin 44 function] — Specific pin 44 assignment per datasheet |
| Контакт 45 | [DATA_NEEDED: pin 45 function] — Specific pin 45 assignment per datasheet |
| Контакт 46 | [DATA_NEEDED: pin 46 function] — Specific pin 46 assignment per datasheet |
| Контакт 47 | [DATA_NEEDED: pin 47 function] — Specific pin 47 assignment per datasheet |
| Контакт 48 | [DATA_NEEDED: pin 48 function] — Specific pin 48 assignment per datasheet |
Типичное применение
CLC5955MTDX/NOPB подходит для 6 применениеs: IF-Sampled Digital Receiver, Test and Measurement Instrumentation, Software-Defined Radio (SDR) Platform, Radar and Sonar Digitizer, Medical Imaging Front-End, Industrial Process Control.
IF-Sampled Digital Receiver
The CLC5955MTDX/NOPB is the canonical IF-sampling ADC for cellular and broadband digital receivers, digitizing modulated IF carriers at 55 MSPS with 11-bit resolution to preserve dynamic range. The wide input bandwidth and pipelined low-latency output pair well with FPGA demodulators handling QAM/QPSK/OFDM waveforms, enabling a clean digital intermediate-frequency architecture in base stations and cable head-end equipment.
Рекомендуется
Test and Measurement Instrumentation
For digital oscilloscopes, spectrum analyzers, and arbitrary waveform digitizers, the CLC5955MTDX/NOPB delivers 55 MSPS at 11-bit resolution - sufficient for capturing repetitive transient waveforms and frequency-domain measurements up to 20 MHz. Its parallel CMOS interface streams conversion data directly into an FPGA buffer, supporting deep-memory capture while keeping the analog front-end simple with the device's internal sample-and-hold.
Рекомендуется
Software-Defined Radio (SDR) Platform
Software-defined radio platforms need a fast, wideband ADC that can digitize IF or even low-band RF directly into the FPGA signal-processing chain. The CLC5955MTDX/NOPB satisfies this with its 55 MSPS rate and 11-bit dynamic range, supporting real-time demodulation of narrowband and wideband signals across HF, VHF, and lower-UHF bands when paired with appropriate analog anti-alias filtering and an FPGA DSP core.
Рекомендуется
Radar and Sonar Digitizer
The CLC5955MTDX/NOPB fits radar and sonar digitizing front-ends that require moderate-resolution, high-speed conversion of wideband return signals. With 55 MSPS sampling and pipelined low-latency output, it provides the timing accuracy needed for pulse-compression and Doppler processing in marine sonar arrays, automotive radar modules, and surveillance radar IF strips where 11-bit dynamic range is adequate.
Рекомендуется
Medical Imaging Front-End
Medical ultrasound and digital X-ray imaging systems use the CLC5955MTDX/NOPB's 55 MSPS rate to digitize multi-channel transducer arrays at real-time frame rates. The pipelined architecture delivers consistent low-latency output essential for beamforming, while 11-bit dynamic range provides sufficient gray-scale resolution for diagnostic imaging in portable and bedside ultrasound equipment with strict thermal and footprint constraints.
Рекомендуется
Industrial Process Control
Industrial process control and factory automation systems use the CLC5955MTDX/NOPB to digitize high-speed sensor signals such as vibration, flow, and current transducers feeding PLCs or industrial PCs. The -40C to +85C industrial temperature grade handles harsh factory environments, and the parallel interface feeds data directly into FPGA-based motor-control loops running predictive maintenance and closed-loop process regulation algorithms.
Рекомендуется
Сводка рекомендуемых товаров
Справочные инженерные данные для CLC5955MTDX/NOPB — сравнение, рекомендации по проектированию и информация о соответствии.
Руководство по выбору
Сравнение с аналогами
| Параметр | Этот товар | CLC5955MTDX | CLC5955MTDX-NOPB | ADS8401IPFBT | ADS8401IPFBR | ADS8508IBDWR |
|---|---|---|---|---|---|---|
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments |
| Package | 48-TSSOP | 48-TSSOP - same | 48-TSSOP - same | 48-TQFP - same-family footprint | 48-TQFP - same-family footprint | 28-SOIC - downgrade package |
| Resolution | 11 bit | 11 bit - same | 11 bit - same | 12 bit - upgrade | 12 bit - upgrade | 12 bit - upgrade |
| Sampling Rate | 55 MSPS | 55 MSPS - same | 55 MSPS - same | 1.5 MSPS - lower | 1.5 MSPS - lower | 0.25 MSPS - lower |
| Data Interface | Parallel | Parallel - same | Parallel - same | Parallel - same | Parallel - same | Parallel - same |
| Supply Voltage | +5 V | +5 V - same | +5 V - same | +5 V - same | +5 V - same | +5 V - same |
| Architecture | Pipelined | Pipelined - same | Pipelined - same | Successive Approximation | Successive Approximation | Successive Approximation |
| Operating Temperature | -40C to +85C | -40C to +85C - same | -40C to +85C - same | -40C to +85C - same | -40C to +85C - same | -40C to +85C - same |
Ключевые отличия
- Highest sampling rate in the legacy CLC5955/TI 11-bit family (против ADS8508IBDWR)
- True 11-bit 55 MSPS pipelined ADC with low-latency output (против ADS8401IPFBT)
- Single +5V analog supply operation simplifies power tree (против ADS6425IRGCR)
Заметки по проектированию
Decouple AVCC and DVCC separately with 10uF tantalum in parallel with 0.1uF ceramic placed as close as practical to each supply pin. Because the CLC5955MTDX/NOPB samples at 55 MSPS, the high-frequency transients on the analog supply are significant - inadequate decoupling causes spurious tones in the digitized output. Add a ferrite bead between analog and digital +5V rails to further isolate the analog input sampling from digital switching noise.
Route the parallel CMOS data outputs with matched trace lengths (typically within 1-2 mm) to avoid setup-and-hold violations on the downstream FPGA or ASIC. Keep digital output traces well separated from the analog input traces to prevent digital switching noise from coupling into the high-impedance analog input - route them on opposite sides of the PCB and use a continuous ground plane as an RF shield between the two regions.
Drive the analog input with a low-impedance, broadband op-amp (such as a THS4631 or similar) capable of settling to 11-bit accuracy within the device's input bandwidth at 55 MSPS. The input sample-and-hold requires fast settling; insufficient input bandwidth limits spurious-free dynamic range. Use a differential drive configuration if the analog signal is single-ended, with the common-mode voltage set to mid-supply for optimal linearity.
Информация о соответствии
RoHS compliance indicated by the /NOPB packaging suffix per TI legacy National Semiconductor part numbering conventions. REACH and halogen-free status not explicitly confirmed in the manufacturer data - set to unknown.
