CLC5955MTDX/NOPB - 11-bit 55MSPS ADC | Texas Instruments
Teilenummer: CLC5955MTDX/NOPB ✗ Abgekündigt| Menge | Stückpreis | Gesamt |
|---|---|---|
| 1 | $28.5 | $28,50 |
| 10 | $25.65 | $256,50 |
| 100 | $22.8 | $2.280,00 |
| 500 | $20.52 | $10.260,00 |
| 1.000 | $18.4 | $18.400,00 |
CLC5955MTDX/NOPB Übersicht
Key specifications from the verified datasheet include 11-bit resolution, 55 MSPS sampling rate, single +5V supply, parallel output interface, and tape-and-reel packaging. The CLC5955 family has been designed as a monolithic broadband ADC providing high dynamic range and low power dissipation for communications infrastructure and instrumentation equipment.
The CLC5955MTDX/NOPB integrates a pipelined multi-stage converter architecture that internally calibrates gain and offset, achieving excellent linearity without external adjustment. The architecture delivers low-latency digital output suitable for real-time signal processing, while the parallel CMOS-compatible interface simplifies connection to FPGAs, ASICs, or DSP processors. The internal reference and sample-and-hold front-end support single-ended or differential analog inputs across a wide input bandwidth.
Typical applications include IF-sampled digital receivers in cellular base stations, broadband cable head-end equipment, test and measurement instrumentation such as digital oscilloscopes and spectrum analyzers, and radar/sonar digitizing front-ends. The wide dynamic range and high sampling rate also support medical imaging and software-defined radio platforms where capturing modulated IF signals with high spurious-free dynamic range is essential.
When designing with this device, allocate adequate decoupling on the +5V analog supply (typically 0.1uF ceramic plus 10uF tantalum close to the AVCC pins) and provide a low-impedance analog input driver with sufficient bandwidth to settle within half an LSB at the 55 MSPS clock rate. Route the parallel output bus with matched trace lengths to avoid setup-and-hold violations at downstream FPGAs.
This page synthesizes distributor inventory, drop-in alternative cross-references, and practical layout/design notes that complement the manufacturer datasheet for engineers evaluating the CLC5955MTDX/NOPB.
Drop-in-Alternativen für CLC5955MTDX/NOPB – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.
Varianten dieser Serie
Modelle derselben Serie, die drop-in-kompatibel sind mit CLC5955MTDX/NOPB (gleiche Bauform und Footprint) – abweichend in Analog Supply Voltage, Architecture, Digital Supply Voltage, Input Type, Operating Temperature.
Schnellvergleichstool – Wählen Sie Alternativbauteile für den Direktvergleich:
CLC5955MTDX
✅ Drop-In📋 Referenzalternative (nicht im Katalog)
CLC5955MTDX-NOPB
✅ Drop-In📋 Referenzalternative (nicht im Katalog)
ADS8401IPFBT
✅ Drop-In📋 Referenzalternative (nicht im Katalog)
ADS8401IPFBRG4
✅ Drop-In✓ Auf Lager
$11.75 / Stück
Datenblatt ansehen →ADS8508IBDWRG4
✅ Drop-In✓ Auf Lager
$7.1 / Stück
Datenblatt ansehen →CLC5955MTDX/NOPB Grenzwerte & elektrische Eigenschaften
| Auflösung | 11 bit |
| Sampling Rate (Max) | 55 MSPS |
| Number of Channels | 1 |
| Architecture | Pipelined |
| Data Interface | Parallel |
| Analog Supply Voltage | +5 V (single supply) |
| Input Type | Single-ended / differential (per datasheet) |
| Gehäuse / Bauform | 48-TFSOP / TSSOP (0.240, 6.10 mm width) |
| Betriebstemperatur | -40C to +85C (industrial) |
| Packaging | Tape & Reel (TR) |
| Montageart | Surface Mount |
| Polarity | Unipolar / Bipolar (per analog input range) |
| Reference Type | Internal (per datasheet) |
| Converter Type | ADC (Analog-to-Digital Converter) |
CLC5955MTDX/NOPB Pin-Konfiguration
| Pin 1 | [DATA_NEEDED: pin 1 function] — Specific pin 1 assignment per datasheet |
| Pin 2 | [DATA_NEEDED: pin 2 function] — Specific pin 2 assignment per datasheet |
| Pin 3 | [DATA_NEEDED: pin 3 function] — Specific pin 3 assignment per datasheet |
| Pin 4 | [DATA_NEEDED: pin 4 function] — Specific pin 4 assignment per datasheet |
| Pin 5 | [DATA_NEEDED: pin 5 function] — Specific pin 5 assignment per datasheet |
| Pin 6 | [DATA_NEEDED: pin 6 function] — Specific pin 6 assignment per datasheet |
| Pin 7 | [DATA_NEEDED: pin 7 function] — Specific pin 7 assignment per datasheet |
| Pin 8 | [DATA_NEEDED: pin 8 function] — Specific pin 8 assignment per datasheet |
| Pin 9 | [DATA_NEEDED: pin 9 function] — Specific pin 9 assignment per datasheet |
| Pin 10 | [DATA_NEEDED: pin 10 function] — Specific pin 10 assignment per datasheet |
| Pin 11 | [DATA_NEEDED: pin 11 function] — Specific pin 11 assignment per datasheet |
| Pin 12 | [DATA_NEEDED: pin 12 function] — Specific pin 12 assignment per datasheet |
| Pin 13 | [DATA_NEEDED: pin 13 function] — Specific pin 13 assignment per datasheet |
| Pin 14 | [DATA_NEEDED: pin 14 function] — Specific pin 14 assignment per datasheet |
| Pin 15 | [DATA_NEEDED: pin 15 function] — Specific pin 15 assignment per datasheet |
| Pin 16 | [DATA_NEEDED: pin 16 function] — Specific pin 16 assignment per datasheet |
| Pin 17 | [DATA_NEEDED: pin 17 function] — Specific pin 17 assignment per datasheet |
| Pin 18 | [DATA_NEEDED: pin 18 function] — Specific pin 18 assignment per datasheet |
| Pin 19 | [DATA_NEEDED: pin 19 function] — Specific pin 19 assignment per datasheet |
| Pin 20 | [DATA_NEEDED: pin 20 function] — Specific pin 20 assignment per datasheet |
| Pin 21 | [DATA_NEEDED: pin 21 function] — Specific pin 21 assignment per datasheet |
| Pin 22 | [DATA_NEEDED: pin 22 function] — Specific pin 22 assignment per datasheet |
| Pin 23 | [DATA_NEEDED: pin 23 function] — Specific pin 23 assignment per datasheet |
| Pin 24 | [DATA_NEEDED: pin 24 function] — Specific pin 24 assignment per datasheet |
| Pin 25 | [DATA_NEEDED: pin 25 function] — Specific pin 25 assignment per datasheet |
| Pin 26 | [DATA_NEEDED: pin 26 function] — Specific pin 26 assignment per datasheet |
| Pin 27 | [DATA_NEEDED: pin 27 function] — Specific pin 27 assignment per datasheet |
| Pin 28 | [DATA_NEEDED: pin 28 function] — Specific pin 28 assignment per datasheet |
| Pin 29 | [DATA_NEEDED: pin 29 function] — Specific pin 29 assignment per datasheet |
| Pin 30 | [DATA_NEEDED: pin 30 function] — Specific pin 30 assignment per datasheet |
| Pin 31 | [DATA_NEEDED: pin 31 function] — Specific pin 31 assignment per datasheet |
| Pin 32 | [DATA_NEEDED: pin 32 function] — Specific pin 32 assignment per datasheet |
| Pin 33 | [DATA_NEEDED: pin 33 function] — Specific pin 33 assignment per datasheet |
| Pin 34 | [DATA_NEEDED: pin 34 function] — Specific pin 34 assignment per datasheet |
| Pin 35 | [DATA_NEEDED: pin 35 function] — Specific pin 35 assignment per datasheet |
| Pin 36 | [DATA_NEEDED: pin 36 function] — Specific pin 36 assignment per datasheet |
| Pin 37 | [DATA_NEEDED: pin 37 function] — Specific pin 37 assignment per datasheet |
| Pin 38 | [DATA_NEEDED: pin 38 function] — Specific pin 38 assignment per datasheet |
| Pin 39 | [DATA_NEEDED: pin 39 function] — Specific pin 39 assignment per datasheet |
| Pin 40 | [DATA_NEEDED: pin 40 function] — Specific pin 40 assignment per datasheet |
| Pin 41 | [DATA_NEEDED: pin 41 function] — Specific pin 41 assignment per datasheet |
| Pin 42 | [DATA_NEEDED: pin 42 function] — Specific pin 42 assignment per datasheet |
| Pin 43 | [DATA_NEEDED: pin 43 function] — Specific pin 43 assignment per datasheet |
| Pin 44 | [DATA_NEEDED: pin 44 function] — Specific pin 44 assignment per datasheet |
| Pin 45 | [DATA_NEEDED: pin 45 function] — Specific pin 45 assignment per datasheet |
| Pin 46 | [DATA_NEEDED: pin 46 function] — Specific pin 46 assignment per datasheet |
| Pin 47 | [DATA_NEEDED: pin 47 function] — Specific pin 47 assignment per datasheet |
| Pin 48 | [DATA_NEEDED: pin 48 function] — Specific pin 48 assignment per datasheet |
Typische Anwendungen
CLC5955MTDX/NOPB ist geeignet für 6 Anwendungs: IF-Sampled Digital Receiver, Test and Measurement Instrumentation, Software-Defined Radio (SDR) Platform, Radar and Sonar Digitizer, Medical Imaging Front-End, Industrial Process Control.
IF-Sampled Digital Receiver
The CLC5955MTDX/NOPB is the canonical IF-sampling ADC for cellular and broadband digital receivers, digitizing modulated IF carriers at 55 MSPS with 11-bit resolution to preserve dynamic range. The wide input bandwidth and pipelined low-latency output pair well with FPGA demodulators handling QAM/QPSK/OFDM waveforms, enabling a clean digital intermediate-frequency architecture in base stations and cable head-end equipment.
Empfohlen
Test and Measurement Instrumentation
For digital oscilloscopes, spectrum analyzers, and arbitrary waveform digitizers, the CLC5955MTDX/NOPB delivers 55 MSPS at 11-bit resolution - sufficient for capturing repetitive transient waveforms and frequency-domain measurements up to 20 MHz. Its parallel CMOS interface streams conversion data directly into an FPGA buffer, supporting deep-memory capture while keeping the analog front-end simple with the device's internal sample-and-hold.
Empfohlen
Software-Defined Radio (SDR) Platform
Software-defined radio platforms need a fast, wideband ADC that can digitize IF or even low-band RF directly into the FPGA signal-processing chain. The CLC5955MTDX/NOPB satisfies this with its 55 MSPS rate and 11-bit dynamic range, supporting real-time demodulation of narrowband and wideband signals across HF, VHF, and lower-UHF bands when paired with appropriate analog anti-alias filtering and an FPGA DSP core.
Empfohlen
Radar and Sonar Digitizer
The CLC5955MTDX/NOPB fits radar and sonar digitizing front-ends that require moderate-resolution, high-speed conversion of wideband return signals. With 55 MSPS sampling and pipelined low-latency output, it provides the timing accuracy needed for pulse-compression and Doppler processing in marine sonar arrays, automotive radar modules, and surveillance radar IF strips where 11-bit dynamic range is adequate.
Empfohlen
Medical Imaging Front-End
Medical ultrasound and digital X-ray imaging systems use the CLC5955MTDX/NOPB's 55 MSPS rate to digitize multi-channel transducer arrays at real-time frame rates. The pipelined architecture delivers consistent low-latency output essential for beamforming, while 11-bit dynamic range provides sufficient gray-scale resolution for diagnostic imaging in portable and bedside ultrasound equipment with strict thermal and footprint constraints.
Empfohlen
Industrial Process Control
Industrial process control and factory automation systems use the CLC5955MTDX/NOPB to digitize high-speed sensor signals such as vibration, flow, and current transducers feeding PLCs or industrial PCs. The -40C to +85C industrial temperature grade handles harsh factory environments, and the parallel interface feeds data directly into FPGA-based motor-control loops running predictive maintenance and closed-loop process regulation algorithms.
Empfohlen
Zusammenfassung der empfohlenen Produkte
Technische Referenzdaten für CLC5955MTDX/NOPB – Vergleich, Designhinweise und Compliance-Informationen.
Auswahlhilfe
Vergleich mit Alternativen
| Parameter | Dieses Produkt | CLC5955MTDX | CLC5955MTDX-NOPB | ADS8401IPFBT | ADS8401IPFBR | ADS8508IBDWR |
|---|---|---|---|---|---|---|
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments |
| Package | 48-TSSOP | 48-TSSOP - same | 48-TSSOP - same | 48-TQFP - same-family footprint | 48-TQFP - same-family footprint | 28-SOIC - downgrade package |
| Resolution | 11 bit | 11 bit - same | 11 bit - same | 12 bit - upgrade | 12 bit - upgrade | 12 bit - upgrade |
| Sampling Rate | 55 MSPS | 55 MSPS - same | 55 MSPS - same | 1.5 MSPS - lower | 1.5 MSPS - lower | 0.25 MSPS - lower |
| Data Interface | Parallel | Parallel - same | Parallel - same | Parallel - same | Parallel - same | Parallel - same |
| Supply Voltage | +5 V | +5 V - same | +5 V - same | +5 V - same | +5 V - same | +5 V - same |
| Architecture | Pipelined | Pipelined - same | Pipelined - same | Successive Approximation | Successive Approximation | Successive Approximation |
| Operating Temperature | -40C to +85C | -40C to +85C - same | -40C to +85C - same | -40C to +85C - same | -40C to +85C - same | -40C to +85C - same |
Wichtigste Unterscheidungsmerkmale
- Highest sampling rate in the legacy CLC5955/TI 11-bit family (vs. ADS8508IBDWR)
- True 11-bit 55 MSPS pipelined ADC with low-latency output (vs. ADS8401IPFBT)
- Single +5V analog supply operation simplifies power tree (vs. ADS6425IRGCR)
Designhinweise
Decouple AVCC and DVCC separately with 10uF tantalum in parallel with 0.1uF ceramic placed as close as practical to each supply pin. Because the CLC5955MTDX/NOPB samples at 55 MSPS, the high-frequency transients on the analog supply are significant - inadequate decoupling causes spurious tones in the digitized output. Add a ferrite bead between analog and digital +5V rails to further isolate the analog input sampling from digital switching noise.
Route the parallel CMOS data outputs with matched trace lengths (typically within 1-2 mm) to avoid setup-and-hold violations on the downstream FPGA or ASIC. Keep digital output traces well separated from the analog input traces to prevent digital switching noise from coupling into the high-impedance analog input - route them on opposite sides of the PCB and use a continuous ground plane as an RF shield between the two regions.
Drive the analog input with a low-impedance, broadband op-amp (such as a THS4631 or similar) capable of settling to 11-bit accuracy within the device's input bandwidth at 55 MSPS. The input sample-and-hold requires fast settling; insufficient input bandwidth limits spurious-free dynamic range. Use a differential drive configuration if the analog signal is single-ended, with the common-mode voltage set to mid-supply for optimal linearity.
Compliance-Informationen
RoHS compliance indicated by the /NOPB packaging suffix per TI legacy National Semiconductor part numbering conventions. REACH and halogen-free status not explicitly confirmed in the manufacturer data - set to unknown.
