Infineon

CY8C3446PVI-091 - 50MHz 8-Bit 64KB Flash MCU | Infineon

Артикул: CY8C3446PVI-091 ✓ Активен
1.71 V to 5.5 V Vdss 48-BSSOP, 7.50 mm body width Package 50 MHz Speed 64 KB Memory
MOQ: 1 |

CY8C3446PVI-091 Обзор

The Infineon Technologies CY8C3446PVI-091 is an 8-bit PSoC 3 microcontroller with a single 8051 core operating up to 50 MHz, 64 KB of flash memory, and a 48-BSSOP package. Its operating voltage range is 1.71 V to 5.5 V, making it suitable for embedded control, sensing, and low-power automation designs using 2.5 V, 3.3 V, or 5 V rails.

An 8-bit microcontroller is a compact computing platform that integrates a CPU, program memory, data memory, peripherals, and I/O into one device. The CY8C3446PVI-091 belongs to the PSoC 3 CY8C34 family, combining an 8051-compatible processing core with programmable mixed-signal and digital peripherals. This family is commonly used where deterministic control, flexible I/O, and compact embedded integration matter more than high processor throughput.

Key resources include 64 KB of flash, 8 KB of SRAM, 2 KB of data EEPROM, and 8 KB of ECC flash. The device includes a 12-bit ADC, two datapointers, a Peripheral Hub Unit with eight parallel access paths, and an interrupt system with 27 sources and eight priority levels. Its supply-voltage range of 1.71 V to 5.5 V supports both low-voltage and conventional industrial systems.

The 8051 core provides an established software ecosystem and predictable peripheral integration. Eight kilobytes of SRAM can support working buffers and real-time tasks, while the 64 KB flash capacity accommodates boot code, application firmware, configuration data, and field-update logic. Four flash protection levels support controlled access to program areas, while ECC flash is intended for data requiring integrity checks.

Typical applications include industrial sensor controllers, building automation modules, motor and relay control, consumer interfaces, low-power battery-powered equipment, and compact measurement instruments. The combination of 50 MHz operation, flexible I/O, and a 1.71 V minimum supply voltage is particularly useful in designs that need broad timing margin without a more complex processor package.

PCB design should preserve a clean supply path and place decoupling capacitors close to the power and ground pins. Firmware deployment must match the device's flash organization and protection settings, and production programming should be qualified for the exact package and suffix combination before volume manufacturing.

This page combines the verified device characteristics with practical application guidance, package constraints, resource comparisons, and same-footprint replacement considerations. It is intended to help engineers determine whether the CY8C3446PVI-091 fits a new design or can replace an existing CY8C3446-series implementation.

Аналоги без доработки для CY8C3446PVI-091 — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.

Варианты в этой серии

Модели той же серии, совместимые без доработки с CY8C3446PVI-091 (тот же форм-фактор и посадочное место) — отличается по Package, Product Type, CPU Core, Flash Memory, Flash Protection Levels.

Cypress Semiconductor
Package: 48-SSOP
Product Type: 8-bit PSoC 3 mixed-signal microcontroller
Flash Protection Levels: 4
Сравнить с CY8C3446PVI-091 →
Infineon
Package: 48-pin BSSOP
Product Type: 8-bit Flash-programmable system-on-chip microcontroller
CPU Core: 8051, 8-bit
Сравнить с CY8C3446PVI-091 →

CY8C3446PVI-092

✅ Прямая замена
Infineon
📦 48-SSOP
8-bit Flash-programmable system-on-chip microcontroller · 8051, 8-bit · 50 MHz · 64 KB (64K x 8 bits) · 1.71 V to 5.5 V · 3.3 V · 12 bits · PSoC 3 CY8C34 family

Уточнить цену

Открыть даташит →

CY8C3446PVI-076

✅ Прямая замена
Cypress Semiconductor
📦 48-SSOP
8-bit PSoC 3 mixed-signal microcontroller · 8051 · 50 MHz · 64 KB · 64K x 8 bits · 8 KB · 2 KB · 12 bits

Уточнить цену

Открыть даташит →

CY8C3446PVA-091

✅ Прямая замена
📦 48-SSOP
Same CY8C3446 family, 64 KB flash, 50 MHz core, and 48-SSOP footprint; PVA and PVI ordering suffixes differ, requiring temperature-grade and qualification review.

📋 Справочный аналог (нет в каталоге)

CY8C3245PVI-150

✅ Прямая замена
Infineon
📦 48-SSOP
PSoC 3 8-bit microcontroller · CY8C32 family · 8051 8-bit CISC · 50 MHz · 32 kByte · 32K x 8 bits · 4 kByte · 12 bits

Уточнить цену

Открыть даташит →

CY8C3446PVI-091 Максимальные параметры и электрические характеристики

Product Type 8-bit PSoC 3 microcontroller (MCU)
CPU Core Single 8051 core
Maximum CPU Frequency 50 MHz
Flash Memory 64 KB
Flash Organization 64K x 8 bits
SRAM 8 KB
Data EEPROM 2 KB
ECC Flash 8 KB
ADC Resolution 12 bits
Operating Voltage Range 1.71 V to 5.5 V
Supported Supply Levels 2.5 V, 3.3 V, and 5 V
Корпус 48-BSSOP, 7.50 mm body width
Число выводов 48 pins
Interrupt Sources 27 sources
Interrupt Priority Levels 8 levels
Datapointers 2 datapointers
Peripheral Hub Unit 1 PHUB with 8 parallel access paths
Flash Protection Levels 4 levels
Тип монтажа Surface mount

Руководство по цоколевке CY8C3446PVI-091 в корпусе 48-bssop, 7.50 mm body width

Цоколевка для CY8C3446PVI-091 (корпус 48-bssop, 7.50 mm body width). Эта цифровая ИС включает выводы GPIO, интерфейсы связи (UART, SPI, I2C) и выводы питания. Обратитесь к техническому описанию производителя для альтернативных функций выводов и вариантов конфигурации. Необходимо для проектирования встраиваемых систем и трассировки печатных плат.

Схема цоколевки корпуса 48-bssop, 7.50 mm body width для CY8C3446PVI-091

Нет подробных данных о распиновке для CY8C3446PVI-091.

Обратитесь к даташиту для полной конфигурации выводов.

Типичное применение

CY8C3446PVI-091 подходит для 6 применениеs: Industrial Sensor Controller, Building Automation Module, Motor and Relay Control, Battery-Powered IoT Device, Measurement Instrument, Consumer Interface Controller.

🏭

Industrial Sensor Controller

The CY8C3446PVI-091 fits industrial sensor nodes that acquire analog measurements and perform local control without a higher-cost processor. Its 12-bit ADC supports sensor conditioning, while the 50 MHz 8051 core leaves timing margin for filtering, calibration, and communications. The 64 KB flash accommodates application firmware and parameter storage, and the 8 KB SRAM supports working buffers. Operating from 1.71 V to 5.5 V also permits deployment across 3.3 V and 5 V industrial subsystems.

🧩

Building Automation Module

The CY8C3446PVI-091 is suitable for building automation modules that monitor environmental inputs and control relays, actuators, or communication interfaces. Its 27 interrupt sources and eight priority levels help organize time-sensitive control tasks, while two datapointers improve data-transfer efficiency. The 48-BSSOP package preserves compatibility with leaded through-hole board layouts, and the 1.71 V minimum operating voltage supports low-power sensor nodes. The 64 KB flash provides space for protocol handling, diagnostics, and configuration.

🔧

Motor and Relay Control

The CY8C3446PVI-091 can act as the supervisory controller in a low-voltage motor, solenoid, or relay system. Its 50 MHz core supports fast control-loop execution, and the eight interrupt priority levels help separate timing-critical tasks from background diagnostics. The 12-bit ADC can monitor current, position, or supply-related signals when the external interface supports analog sensing. Its 2 KB EEPROM and 8 KB ECC flash provide useful local storage for calibration and integrity-protected operating parameters.

🧩

Battery-Powered IoT Device

The CY8C3446PVI-091 fits compact battery-powered IoT products that combine sensing, local logic, and low-power communications. Its operating-voltage range begins at 1.71 V, allowing operation from suitable low-voltage energy-storage arrangements, while the 8-bit architecture can reduce processing overhead in duty-cycled designs. The 64 KB flash stores application code and configuration, and 8 KB of SRAM handles transient packet and signal-processing workloads. Low-power behavior should be configured through the device's clocking and peripheral settings.

🔧

Measurement Instrument

The CY8C3446PVI-091 is appropriate for compact digital measurement instruments that combine acquisition, calibration, display control, and data logging. The 12-bit ADC handles analog front-end measurements, while the 50 MHz 8051 core processes samples and executes control routines. With 64 KB of flash, 8 KB of SRAM, and 2 KB of EEPROM, the device can divide code, working memory, and persistent configuration among distinct storage areas. Four flash-protection levels support controlled firmware access in production configurations.

📱

Consumer Interface Controller

The CY8C3446PVI-091 can serve as the logic controller in consumer products requiring buttons, indicators, sensors, and a low-cost embedded interface. The Peripheral Hub Unit provides eight parallel access paths for peripheral traffic, helping coordinate real-time I/O alongside the 8051 core. Its 48-BSSOP package is practical for products assembled on leaded PCB layouts, while the 1.71 V to 5.5 V range accommodates multiple internal rails. Firmware should use the device's memory-protection configuration to prevent unintended program access.

What is the CY8C3446PVI-091?
The CY8C3446PVI-091 is an Infineon Technologies 8-bit PSoC 3 microcontroller with a 50 MHz 8051 core, 64 KB of flash, and a 48-BSSOP package. According to the manufacturer datasheet, it also includes 8 KB of SRAM, 2 KB of EEPROM, a 12-bit ADC, and a 1.71 V to 5.5 V operating-voltage range. It is intended for compact embedded control, measurement, and automation systems.
What is the operating voltage of CY8C3446PVI-091?
The CY8C3446PVI-091 operates from 1.71 V to 5.5 V. The manufacturer datasheet identifies the device for 2.5 V, 3.3 V, and 5 V supply arrangements, giving designers flexibility across low-voltage and conventional embedded systems. External circuitry should maintain stable voltage and power during transient conditions at the device supply pins.
How much flash and SRAM does CY8C3446PVI-091 have?
The CY8C3446PVI-091 provides 64 KB of flash, 8 KB of SRAM, 2 KB of data EEPROM, and 8 KB of ECC flash. According to the manufacturer datasheet, the flash supports four protection levels. These resources allow firmware, working data, configuration values, and integrity-protected storage to share one integrated microcontroller package.
What is the maximum clock frequency of CY8C3446PVI-091?
The maximum CPU frequency of the CY8C3446PVI-091 is 50 MHz. Its single 8051 core therefore provides substantially more timing headroom than lower-speed 8051 derivatives. According to the manufacturer datasheet, the device also includes two datapointers, which helps improve data movement efficiency in interrupt-driven and block-processing firmware.
Where can I download the CY8C3446PVI-091 datasheet PDF?
The CY8C3446PVI-091 datasheet PDF is available through the product-document link on this page. It is the primary reference for the pin description, electrical characteristics, memory map, peripheral behavior, package dimensions, and programming requirements. Engineers should also check the ordering information because suffix and temperature-grade differences can affect qualification for a specific product variant.
Where can I find the CY8C3446PVI-091 pinout?
Use the pin-description table and package drawing in the manufacturer datasheet to find the CY8C3446PVI-091 pinout. The device uses a 48-BSSOP package with a 7.50 mm body width, so the package drawing must be matched to the physical lead layout before PCB tracks are assigned. Verify every power, ground, programming, reset, clock, and peripheral signal against the exact ordering suffix.
What is the best drop-in replacement for CY8C3446PVI-091?
CY8C3446PVI-092 is the closest same-family drop-in candidate because it retains the CY8C3446 architecture and 48-SSOP footprint. CY8C3446PVI-076 and CY8C3446PVA-091 are also footprint-compatible family options, but their ordering codes must be checked for temperature and qualification requirements. No replacement should be released without comparing the manufacturer datasheets, firmware constraints, and exposed programming pins.
Can CY8C3446PVA-091 replace CY8C3446PVI-091?
CY8C3446PVA-091 can be considered as a footprint-compatible replacement because both are CY8C3446 devices in a 48-SSOP package, but it is not an unconditional substitute. The ordering suffixes can indicate different qualification or temperature options. According to the manufacturer ordering information, confirm the electrical limits, operating-temperature grade, and application qualification before using it as a production replacement.
CY8C3446PVI-091 vs CY8C3245PVI-150 - which is better?
The CY8C3446PVI-091 is preferable when the design requires 64 KB of flash because the CY8C3245PVI-150 has 32 KB. Both are listed as 48-pin SSOP 8051-family MCUs, but matching memory capacity does not guarantee identical peripherals or firmware behavior. Use the CY8C3245PVI-150 only after a complete comparison of pin functions, memory maps, clock requirements, and peripheral assignments.
When should I choose CY8C3446PVI-091 over another 8-bit MCU?
Choose the CY8C3446PVI-091 when a design needs an established 8051 core, 50 MHz operation, 64 KB of flash, 8 KB of SRAM, and operation down to 1.71 V in a 48-BSSOP footprint. It is particularly suitable for low-power sensing, industrial control, and automation products that benefit from the PSoC 3 peripheral architecture and existing 8051 firmware ecosystem.
Is CY8C3446PVI-091 suitable for industrial control applications?
The CY8C3446PVI-091 is suitable for many industrial control applications because it combines a 50 MHz 8051 core, 64 KB of flash, eight priority levels for interrupts, and a 1.71 V to 5.5 V supply range. Its 48-BSSOP package also simplifies assembly on conventional leaded PCB footprints. Confirm the exact temperature grade and qualification status for the deployed environment.
How is the CY8C3446PVI-091 programmed?
The CY8C3446PVI-091 supports programming through the programming and verification interfaces defined by the PSoC 3 device family. The Elnec device list identifies the CY8C3446PVI-091 as an ISP-SWD programmable device. Production programming equipment must still be configured for the exact package, flash-protection scheme, voltage levels, and device algorithm specified in the manufacturer programming documentation.
What peripherals are integrated into CY8C3446PVI-091?
The CY8C3446PVI-091 integrates a 12-bit ADC, two datapointers, one Peripheral Hub Unit with eight parallel access paths, and an interrupt system with 27 sources and eight priority levels. According to the manufacturer datasheet, these resources support concurrent sensing and control activity. Exact peripheral availability, pin multiplexing, and operating limits depend on the selected device configuration.
Where can I buy CY8C3446PVI-091 online?
Use the Request a Quote form on this page to request CY8C3446PVI-091 availability, MOQ, packaging, and delivery terms. One distributor listing reports a stock quantity of 6,976 pieces, but availability can change without notice. The form lets the sourcing team confirm the exact MPN, traceable condition, lead time, and shipment quantity.
What is the price and lead time for CY8C3446PVI-091?
Current CY8C3446PVI-091 price and confirmed lead time should be obtained through the Request a Quote form on this page. The available listing states that lead time is to be confirmed, while another listing shows an estimated delivery window rather than a guaranteed date. For production planning, request written confirmation of stock, minimum order quantity, packaging, and shipment schedule.

Справочные инженерные данные для CY8C3446PVI-091 — сравнение, рекомендации по проектированию и информация о соответствии.

Руководство по выбору

Choose CY8C3446PVI-091 when the application needs the full 64 KB program memory, 8 KB SRAM, a 12-bit ADC, and operation from 1.71 V to 5.5 V in a 48-BSSOP package. It is a strong fit for low-voltage sensing, industrial control, building automation, and compact measurement systems that already use the 8051 ecosystem. CY8C3446PVI-092 is the closest ordering alternative when its specific temperature and qualification characteristics satisfy the product requirements. Consider CY8C3446PVI-076 for the same PSoC 3 family with up to 50 MHz, 64 KB flash, and a 12-bit ADC. CY8C3446PVA-091 offers the same 48-SSOP outline but demands careful review of suffix-related operating limits. Use CY8C3245PVI-150 only when 32 KB of flash is sufficient; otherwise its 50% lower program capacity can force code restructuring, external memory, or firmware feature reduction. In every case, verify pin functions, memory organization, programming, and qualification before release.

Сравнение с аналогами

Параметр Этот товар CY8C3446PVI-092 CY8C3446PVI-076 CY8C3446PVA-091 CY8C3245PVI-150
Package 48-BSSOP 48-SSOP 48-SSOP 48-SSOP 48-SSOP
Brand Infineon Technologies Infineon Technologies Infineon Technologies Infineon Technologies Infineon Technologies
CPU Architecture Single-core 8051 8051 8051 8051 8051

Ключевые отличия

  • Twice the flash memory of the lower-memory family option (против CY8C3245PVI-150)
  • Lower minimum supply voltage for compatible low-voltage designs (против CY8C3245PVI-150)
  • Direct same-family ordering alternative (против CY8C3446PVI-092)
  • Documented 12-bit conversion capability (против CY8C3245PVI-150)

Заметки по проектированию

Route the 48-BSSOP footprint to match the manufacturer package drawing and preserve adequate clearance between adjacent leads. Place the required bypass capacitors immediately beside the device's supply and ground pins, with short, low-loop-area connections. Because the package is a leaded 48-BSSOP rather than a compact QFN, account for lead pitch and soldering clearance during board layout.

Design the supply path for the full 1.71 V to 5.5 V operating range rather than assuming only 3.3 V or 5 V operation. Check every connected peripheral for voltage-domain compatibility and ensure reset, programming, and clock behavior remain valid at the minimum rail. Place local decoupling where it can suppress supply transients without adding long current loops between the capacitor and device pins.

Do not treat a matching 48-SSOP outline as sufficient proof of a drop-in replacement. Ordering suffixes can change temperature grade, qualification, flash configuration, or other commercial conditions. For CY8C3446PVI-092, CY8C3446PVI-076, CY8C3446PVA-091, and CY8C3245PVI-150, compare the manufacturer pin table, electrical characteristics, memory organization, and device programming requirements before approving substitution.

Separate analog measurement paths from switching or high-current outputs to reduce coupling into the 12-bit ADC and firmware measurements. Keep sensor inputs and reference connections away from relay, motor, and power-converter traces where the board layout permits. Use a continuous ground reference for the analog and digital sections, and evaluate the actual switching-node and return-current geometry rather than relying only on a split-plane arrangement.

Информация о соответствии

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Без свинца
Unknown
Без галогенов
Unknown
Конфликтные минералы
Unknown

No specific RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declarations were identified for the exact ordering code.

Данные проверены: 2026-11-19 — данные проверены и курируются командой компонентной инженерии XAIPART

Похожие запросы

CY8C3446PVI-091 datasheet CY8C3446PVI-091 specifications CY8C3446PVI-091 pinout CY8C3446PVI-091 datasheet pdf Infineon CY8C3446PVI-091 CY8C3446PVI-091 48-SSOP CY8C3446PVI-091 50MHz 64KB flash CY8C3446PVI-091 equivalent CY8C3446PVI-091 replacement CY8C3446PVI-091 vs CY8C3245PVI-150 CY8C3446PVI-091 price CY8C3446PVI-091 stock CY8C3446PVI-091 programming CY8C3446PVI-091 industrial sensor controller CY8C3446PVI-091 12-bit ADC

Связанные компоненты & термины

Infineon Technologies CY8C3446PVI-091 CY8C3446PVI-092 CY8C3446PVI-076 CY8C3446PVA-091 CY8C3245PVI-150 PSoC 3 CY8C34 family 8051 core 8-bit microcontroller microcontroller embedded controller semiconductor 48-BSSOP SSOP package family surface mount 64 KB flash 8 KB SRAM 2 KB EEPROM 12-bit ADC Peripheral Hub Unit ISP-SWD industrial sensor controller building automation 50 MHz
Быстрый запрос цены (RFQ)
Заполните все данные — наша команда продаж ответит в течение 24 часов
Артикул Производитель Корпус QTY Целевая цена Итого
✓
Запрос цены отправлен!

Мы ответим на ваш email в течение 24 часов

1
RFQ отправлен
2
Предложение получено
3
Заказ оформлен
4
Оплата
5
Отправлено
6
Доставлено
Просмотреть детали RFQ