CY8C3446PVI-091 - 50MHz 8-Bit 64KB Flash MCU | Infineon
MPN: CY8C3446PVI-091 ✓ AktifCY8C3446PVI-091 Genel Bakış
An 8-bit microcontroller is a compact computing platform that integrates a CPU, program memory, data memory, peripherals, and I/O into one device. The CY8C3446PVI-091 belongs to the PSoC 3 CY8C34 family, combining an 8051-compatible processing core with programmable mixed-signal and digital peripherals. This family is commonly used where deterministic control, flexible I/O, and compact embedded integration matter more than high processor throughput.
Key resources include 64 KB of flash, 8 KB of SRAM, 2 KB of data EEPROM, and 8 KB of ECC flash. The device includes a 12-bit ADC, two datapointers, a Peripheral Hub Unit with eight parallel access paths, and an interrupt system with 27 sources and eight priority levels. Its supply-voltage range of 1.71 V to 5.5 V supports both low-voltage and conventional industrial systems.
The 8051 core provides an established software ecosystem and predictable peripheral integration. Eight kilobytes of SRAM can support working buffers and real-time tasks, while the 64 KB flash capacity accommodates boot code, application firmware, configuration data, and field-update logic. Four flash protection levels support controlled access to program areas, while ECC flash is intended for data requiring integrity checks.
Typical applications include industrial sensor controllers, building automation modules, motor and relay control, consumer interfaces, low-power battery-powered equipment, and compact measurement instruments. The combination of 50 MHz operation, flexible I/O, and a 1.71 V minimum supply voltage is particularly useful in designs that need broad timing margin without a more complex processor package.
PCB design should preserve a clean supply path and place decoupling capacitors close to the power and ground pins. Firmware deployment must match the device's flash organization and protection settings, and production programming should be qualified for the exact package and suffix combination before volume manufacturing.
This page combines the verified device characteristics with practical application guidance, package constraints, resource comparisons, and same-footprint replacement considerations. It is intended to help engineers determine whether the CY8C3446PVI-091 fits a new design or can replace an existing CY8C3446-series implementation.
Drop-in alternatifler için CY8C3446PVI-091 — aynı paket, pin-başına uyumlu. PCB yeniden montajı gerektiren farklı paket bileşenleri dışlanmıştır.
Bu Serideki Variantlar
Yedek parça uyumlu olan aynı serideki modeller CY8C3446PVI-091 (aynı form faktörü ve ayağa oturma) — farklı olan Package, Product Type, CPU Core, Flash Memory, Flash Protection Levels.
CY8C3446PVI-092
✅ YerleştirmeFiyat için iletişime geçin
Veri Şablonunu Görüntüle →CY8C3446PVI-076
✅ YerleştirmeFiyat için iletişime geçin
Veri Şablonunu Görüntüle →CY8C3446PVA-091
✅ Yerleştirme📋 Katalogda Olmayan Referans Alternatifi
CY8C3245PVI-150
✅ YerleştirmeFiyat için iletişime geçin
Veri Şablonunu Görüntüle →CY8C3446PVI-091 Maksimum Değerlendirmeler & Elektriksel Özellikler
| Product Type | 8-bit PSoC 3 microcontroller (MCU) |
| CPU Core | Single 8051 core |
| Maximum CPU Frequency | 50 MHz |
| Flash Memory | 64 KB |
| Flash Organization | 64K x 8 bits |
| SRAM | 8 KB |
| Data EEPROM | 2 KB |
| ECC Flash | 8 KB |
| ADC Resolution | 12 bits |
| Operating Voltage Range | 1.71 V to 5.5 V |
| Supported Supply Levels | 2.5 V, 3.3 V, and 5 V |
| Paket | 48-BSSOP, 7.50 mm body width |
| Pin Sayısı | 48 pins |
| Interrupt Sources | 27 sources |
| Interrupt Priority Levels | 8 levels |
| Datapointers | 2 datapointers |
| Peripheral Hub Unit | 1 PHUB with 8 parallel access paths |
| Flash Protection Levels | 4 levels |
| Montaj Türü | Surface mount |
CY8C3446PVI-091 48-bssop, 7.50 mm body width Pin Yapısı Kılavuzu
CY8C3446PVI-091 (48-bssop, 7.50 mm body width paket) için pin yapısı. Bu dijital IC, GPIO, iletişim arayüzleri (UART, SPI, I2C) ve güç pinleri içerir. Alternatif pin işlevleri ve yapılandırma seçenekleri için üretici veri kitapçığını referans alın. Tünel sistem tasarımı ve PCB yerleşimi için temel bir bileşendir.
Ayrıntılı pin çıkış verisi mevcut değil: CY8C3446PVI-091.
Aşağıdaki veri sayfası tam pin konfigürasyonu için.
Tipik Uygulamalar
CY8C3446PVI-091 için uygundur 6 uygulamas: Industrial Sensor Controller, Building Automation Module, Motor and Relay Control, Battery-Powered IoT Device, Measurement Instrument, Consumer Interface Controller.
Industrial Sensor Controller
The CY8C3446PVI-091 fits industrial sensor nodes that acquire analog measurements and perform local control without a higher-cost processor. Its 12-bit ADC supports sensor conditioning, while the 50 MHz 8051 core leaves timing margin for filtering, calibration, and communications. The 64 KB flash accommodates application firmware and parameter storage, and the 8 KB SRAM supports working buffers. Operating from 1.71 V to 5.5 V also permits deployment across 3.3 V and 5 V industrial subsystems.
Önerilen
Building Automation Module
The CY8C3446PVI-091 is suitable for building automation modules that monitor environmental inputs and control relays, actuators, or communication interfaces. Its 27 interrupt sources and eight priority levels help organize time-sensitive control tasks, while two datapointers improve data-transfer efficiency. The 48-BSSOP package preserves compatibility with leaded through-hole board layouts, and the 1.71 V minimum operating voltage supports low-power sensor nodes. The 64 KB flash provides space for protocol handling, diagnostics, and configuration.
Önerilen
Motor and Relay Control
The CY8C3446PVI-091 can act as the supervisory controller in a low-voltage motor, solenoid, or relay system. Its 50 MHz core supports fast control-loop execution, and the eight interrupt priority levels help separate timing-critical tasks from background diagnostics. The 12-bit ADC can monitor current, position, or supply-related signals when the external interface supports analog sensing. Its 2 KB EEPROM and 8 KB ECC flash provide useful local storage for calibration and integrity-protected operating parameters.
Önerilen
Battery-Powered IoT Device
The CY8C3446PVI-091 fits compact battery-powered IoT products that combine sensing, local logic, and low-power communications. Its operating-voltage range begins at 1.71 V, allowing operation from suitable low-voltage energy-storage arrangements, while the 8-bit architecture can reduce processing overhead in duty-cycled designs. The 64 KB flash stores application code and configuration, and 8 KB of SRAM handles transient packet and signal-processing workloads. Low-power behavior should be configured through the device's clocking and peripheral settings.
Önerilen
Measurement Instrument
The CY8C3446PVI-091 is appropriate for compact digital measurement instruments that combine acquisition, calibration, display control, and data logging. The 12-bit ADC handles analog front-end measurements, while the 50 MHz 8051 core processes samples and executes control routines. With 64 KB of flash, 8 KB of SRAM, and 2 KB of EEPROM, the device can divide code, working memory, and persistent configuration among distinct storage areas. Four flash-protection levels support controlled firmware access in production configurations.
Önerilen
Consumer Interface Controller
The CY8C3446PVI-091 can serve as the logic controller in consumer products requiring buttons, indicators, sensors, and a low-cost embedded interface. The Peripheral Hub Unit provides eight parallel access paths for peripheral traffic, helping coordinate real-time I/O alongside the 8051 core. Its 48-BSSOP package is practical for products assembled on leaded PCB layouts, while the 1.71 V to 5.5 V range accommodates multiple internal rails. Firmware should use the device's memory-protection configuration to prevent unintended program access.
Önerilen
Önerilen Ürünler Özeti
Mühendislik referans verileri: CY8C3446PVI-091 — karşılaştırma, tasarım rehberi ve uyumluluk bilgileri.
Seçim Kılavuzu
Alternatiflerle Karşılaştırma
| Parametre | Bu Ürün | CY8C3446PVI-092 | CY8C3446PVI-076 | CY8C3446PVA-091 | CY8C3245PVI-150 |
|---|---|---|---|---|---|
| Package | 48-BSSOP | 48-SSOP | 48-SSOP | 48-SSOP | 48-SSOP |
| Brand | Infineon Technologies | Infineon Technologies | Infineon Technologies | Infineon Technologies | Infineon Technologies |
| CPU Architecture | Single-core 8051 | 8051 | 8051 | 8051 | 8051 |
Ana Farklılayıcılar
- Twice the flash memory of the lower-memory family option (karşılaştırma:CY8C3245PVI-150)
- Lower minimum supply voltage for compatible low-voltage designs (karşılaştırma:CY8C3245PVI-150)
- Direct same-family ordering alternative (karşılaştırma:CY8C3446PVI-092)
- Documented 12-bit conversion capability (karşılaştırma:CY8C3245PVI-150)
Tasarım Notları
Route the 48-BSSOP footprint to match the manufacturer package drawing and preserve adequate clearance between adjacent leads. Place the required bypass capacitors immediately beside the device's supply and ground pins, with short, low-loop-area connections. Because the package is a leaded 48-BSSOP rather than a compact QFN, account for lead pitch and soldering clearance during board layout.
Design the supply path for the full 1.71 V to 5.5 V operating range rather than assuming only 3.3 V or 5 V operation. Check every connected peripheral for voltage-domain compatibility and ensure reset, programming, and clock behavior remain valid at the minimum rail. Place local decoupling where it can suppress supply transients without adding long current loops between the capacitor and device pins.
Do not treat a matching 48-SSOP outline as sufficient proof of a drop-in replacement. Ordering suffixes can change temperature grade, qualification, flash configuration, or other commercial conditions. For CY8C3446PVI-092, CY8C3446PVI-076, CY8C3446PVA-091, and CY8C3245PVI-150, compare the manufacturer pin table, electrical characteristics, memory organization, and device programming requirements before approving substitution.
Separate analog measurement paths from switching or high-current outputs to reduce coupling into the 12-bit ADC and firmware measurements. Keep sensor inputs and reference connections away from relay, motor, and power-converter traces where the board layout permits. Use a continuous ground reference for the analog and digital sections, and evaluate the actual switching-node and return-current geometry rather than relying only on a split-plane arrangement.
Uyumluluk Bilgisi
No specific RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declarations were identified for the exact ordering code.