CY8C4014LQI-422 - 16MHz Cortex-M0 PSoC 4 | Infineon
Артикул: CY8C4014LQI-422 ✓ АктивенCY8C4014LQI-422 Обзор
A PSoC, or programmable system-on-chip, is a microcontroller architecture that integrates a CPU, programmable digital logic, analog blocks, and configurable peripherals into a single semiconductor package. Within the broader hierarchy of embedded semiconductors, the CY8C4014LQI-422 belongs to the microcontroller family and the PSoC 4 product line. This integration can reduce the number of separate components required for sensing, control, signal conditioning, and communications-oriented products.
The headline configuration combines a 16 MHz Arm Cortex-M0 core with 16 kByte of flash and 2 kByte of SRAM. The manufacturer identifies 20 I/O pins and a compact 24-QFN package measuring 4 mm by 4 mm. These characteristics make the device suitable for space-constrained embedded controls that require deterministic peripheral integration, low component count, and a small board footprint.
The CY8C4000 family architecture allows designers to use programmable digital blocks and analog functions alongside conventional microcontroller peripherals. According to the Infineon product page, the CY8C4014LQI-422 is a PSoC 4 MCU with Arm Cortex-M0 processing, 16 kByte flash, 2 kByte SRAM, and 20 I/O pins. Its combination of embedded memory, programmable mixed-signal resources, and a small QFN package supports consolidation of simple control boards without requiring a large external discrete analog network.
Typical design uses include capacitive-sensing interfaces, compact industrial controls, wearable and portable products, low-speed communication modules, sensor-conditioning systems, and general-purpose embedded products. The Arm Cortex-M0 architecture provides a familiar software ecosystem, while the PSoC 4 programmable fabric allows application-specific signal routing and peripheral behavior to be adapted without moving to a larger device.
PCB design should preserve the manufacturer-recommended power, ground, decoupling, and exposed-pad layout. Place the required bypass capacitors close to their associated supply pins, connect the thermal pad according to the package drawing, and maintain a short return path through the pad and ground plane. Confirm the exact pin functions and exposed-pad requirements in the manufacturer datasheet before assigning PCB nets or routing sensitive analog signals.
This product page combines the manufacturer configuration with package, sourcing, lifecycle, and application guidance. It also provides a same-footprint replacement analysis for engineers who need to identify a qualified substitute without changing the PCB land pattern, plus design notes covering decoupling, thermal-pad implementation, and mixed-signal layout discipline.
Аналоги без доработки для CY8C4014LQI-422 — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.
Варианты в этой серии
Модели той же серии, совместимые без доработки с CY8C4014LQI-422 (тот же форм-фактор и посадочное место) — отличается по Flash Memory, Package, Product Type, SRAM, Architecture.
CY8C4014LQI-421T
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
CY8C4014LQI-422 Максимальные параметры и электрические характеристики
| Product Type | PSoC 4 programmable system-on-chip microcontroller |
| Product Family | PSoC 4000 / CY8C4000 |
| CPU Architecture | 32-bit Arm Cortex-M0 |
| Maximum CPU Frequency | 16 MHz |
| Flash Memory | 16 kByte |
| Program Memory Organization | 16K x 8 bits |
| SRAM | 2 kByte |
| I/O Pin Count | 20 pins |
| Корпус | 24-QFN (4 x 4 mm) |
| Тип монтажа | Surface mount |
| Core Variant | Arm Cortex-M0 |
Руководство по цоколевке CY8C4014LQI-422 в корпусе 24-qfn (4 x 4 mm)
Цоколевка для CY8C4014LQI-422 (корпус 24-qfn (4 x 4 mm)). Эта цифровая ИС включает выводы GPIO, интерфейсы связи (UART, SPI, I2C) и выводы питания. Обратитесь к техническому описанию производителя для альтернативных функций выводов и вариантов конфигурации. Необходимо для проектирования встраиваемых систем и трассировки печатных плат.
Нет подробных данных о распиновке для CY8C4014LQI-422.
Обратитесь к даташиту для полной конфигурации выводов.
Типичное применение
CY8C4014LQI-422 подходит для 6 применениеs: Capacitive Touch Controls, Industrial Sensor Control, Portable Wearable Devices, Compact Communication Modules, LED Lighting Control, Embedded Control Boards.
Capacitive Touch Controls
The CY8C4014LQI-422 fits compact capacitive-touch control designs because its PSoC 4 architecture combines programmable analog and digital resources with a 16 MHz Arm Cortex-M0 core. The manufacturer identifies 20 I/O pins, 16 kByte of flash, and 2 kByte of SRAM, providing control logic and configuration storage in one 24-QFN device. A touch interface can use the programmable system-on-chip resources instead of placing separate sensing, filtering, and control ICs around a conventional microcontroller. The design team should validate electrode geometry, scan timing, noise immunity, and calibration behavior with the manufacturer’s recommended sensing methods before finalizing a production PCB.
Рекомендуется
Industrial Sensor Control
The CY8C4014LQI-422 is suitable for compact industrial sensor-control assemblies that combine signal acquisition, local processing, and digital output in a limited board area. Its 16 MHz Arm Cortex-M0 core supports responsive control firmware, while 16 kByte of flash accommodates application code and 2 kByte of SRAM provides working memory. Integrating programmable PSoC 4 resources can reduce discrete analog overhead compared with a fixed-function controller design. For an industrial deployment, the engineering team must verify supply limits, operating temperature, EMC requirements, and the exact peripheral resources required by the selected sensor interface against the manufacturer documentation.
Рекомендуется
Portable Wearable Devices
The 4 x 4 mm 24-QFN package makes the CY8C4014LQI-422 appropriate for space-conscious wearable and portable products where controller area and component count influence the enclosure. The Arm Cortex-M0 core provides a 32-bit control architecture at up to 16 MHz, and the 2 kByte SRAM and 16 kByte flash are suited to lightweight sensing, gesture, or interface firmware. The PSoC platform can consolidate programmable analog behavior and digital logic that would otherwise require additional devices. Battery-powered implementations still require a careful operating-mode and load-current assessment, plus confirmation of the voltage and temperature ranges for the production suffix.
Рекомендуется
Compact Communication Modules
The CY8C4014LQI-422 can serve as the control processor in a compact communication module that requires a low-power microcontroller plus configurable peripheral logic. Its 16 MHz Arm Cortex-M0 core and 16 kByte of flash support protocol handling, while 2 kByte of SRAM provides space for packet buffers and working state. The PSoC 4 programmable resources allow designers to implement application-specific timing, signal routing, or control behavior around the standard MCU core. RF implementation remains external to this device, so the layout should preserve short return paths and provide controlled supply and ground planes around the radio and power circuitry.
Рекомендуется
LED Lighting Control
The CY8C4014LQI-422 is suitable for compact LED lighting controllers that combine user input, sequencing, fault handling, and communication in one small package. The 20 available I/O pins can support digital control functions, while the programmable PSoC 4 resources can provide timing and signal conditioning beyond the basic Cortex-M0 core. Flash and SRAM capacities are appropriate for embedded lighting sequences and parameter storage without requiring a separate memory device. Designers should size the external driver interface for the LED load, keep switching-current paths away from sensitive control signals, and confirm the exact electrical limits of the selected ordering code.
Рекомендуется
Embedded Control Boards
The CY8C4014LQI-422 is well suited to compact embedded control boards requiring a capable core, modest program memory, and a low component-count mixed-signal implementation. Its 16 MHz Arm Cortex-M0 processor, 16 kByte flash, 2 kByte SRAM, and 20 I/O pins provide a practical foundation for motor, interface, and sensor-control functions. PSoC 4 programmable resources can be configured to reduce the need for application-specific glue logic while preserving a conventional MCU development workflow. A robust implementation should follow the manufacturer’s power and decoupling sequence, connect the QFN thermal pad correctly, and validate programming, reset, and debug access on the assembled board.
Рекомендуется
Сводка рекомендуемых товаров
Справочные инженерные данные для CY8C4014LQI-422 — сравнение, рекомендации по проектированию и информация о соответствии.
Руководство по выбору
Сравнение с аналогами
| Параметр | Этот товар | CY8C4014LQI-421T |
|---|---|---|
| Package | 24-QFN (4 x 4 mm) | 24-QFN (4 x 4 mm) |
| Brand | Infineon Technologies | Infineon Technologies |
| Product Family | PSoC 4000 / CY8C4000 | CY8C4014 family |
| CPU Architecture | 32-bit Arm Cortex-M0 | Arm Cortex-M0 |
| Maximum CPU Frequency | 16 MHz | 16 MHz |
| Flash Memory | 16 kByte | 16 kByte |
| SRAM | 2 kByte | 2 kByte |
| I/O Pin Count | 20 pins | 20 pins |
Ключевые отличия
- Integrated programmable mixed-signal platform in a compact package (против Generic 24-QFN Arm Cortex-M0 microcontroller)
- Same-footprint family option for design continuity (против CY8C4014LQI-421T)
- Established Cortex-M0 software foundation (против A non-Arm 24-QFN controller)
Заметки по проектированию
Implement the 24-QFN footprint exactly as shown in the manufacturer package drawing, including the exposed pad. Place all required bypass capacitors adjacent to their associated power pins and provide a short, low-impedance connection from the thermal pad into the ground plane. The 4 x 4 mm footprint offers little routing space, so footprint geometry and capacitor placement should be frozen before the signal-routing stage.
Separate analog-sensitive nets from digital switching paths and route the PSoC 4 programmable peripheral signals according to the datasheet recommendations. Keep the ground return beneath or near the device continuous, and avoid routing high-current outputs through the quiet analog area. If capacitive sensing is used, compare sensor traces against switch-mode and communication circuitry to minimize injected noise and false detections.
Design the supply network around the manufacturer’s specified voltage range and startup behavior. Use the recommended capacitor types, voltage ratings, and effective capacitance, including any cold-temperature derating required for ceramic capacitors. Validate the complete power budget across active, sleep, and reset states before selecting the external regulator; the device’s stated 16 MHz frequency and 2 kByte SRAM do not by themselves establish permitted operating voltages.
Информация о соответствии
Material-compliance and automotive-qualification declarations for the exact CY8C4014LQI-422 ordering code require confirmation from Infineon.