Infineon

CY8C4125LQI-483 - 24MHz 32KB PSoC 4 MCU | Infineon

Артикул: CY8C4125LQI-483 ✓ Активен
2.5 V, 3.3 V, or 5 V Vdss 40-QFN, 6 mm x 6 mm Package 24 MHz Speed 32 KB flash Memory
MOQ: 1 |

CY8C4125LQI-483 Обзор

Infineon Technologies CY8C4125LQI-483 is a PSoC 4100 programmable system-on-chip microcontroller with a 32-bit Arm Cortex-M0 CPU operating up to 24 MHz, 32 KB of flash memory, 4 KB of SRAM, and a 40-QFN package measuring 6 mm by 6 mm. The device provides 34 GPIOs and integrates a 12-bit successive-approximation-register ADC capable of 806 ksps.

A PSoC microcontroller is a mixed-signal embedded-control device that combines a microcontroller core with programmable analog and digital peripherals. Within the semiconductor hierarchy, PSoC 4 belongs to the microcontroller and embedded-processor family, where it bridges general-purpose firmware execution with configurable signal acquisition, touch sensing, timers, communications, and control functions. This integration can reduce the number of discrete components required in compact sensing and control systems.

Principal features include 24 MHz maximum CPU operation, 32 KB flash, 4 KB SRAM, 34 GPIOs, a 12-bit SAR ADC at 806 ksps, and a dedicated CapSense block for touch-sensing applications. The digital fabric allows peripherals to be routed to GPIO pins according to application requirements, while the analog section supports acquisition and signal-conditioning functions near the sensor input.

The Arm Cortex-M0 architecture provides a compact instruction set and deterministic embedded-control behavior without the complexity of a higher-performance core. Four configurable 16-bit timer, counter, and PWM blocks support periodic measurement, motor or actuator timing, and general event management. Firmware is stored in the 32 KB program-memory region, while the 4 KB SRAM provides working space for stacks, variables, and intermediate processing.

Typical applications include capacitive touch controls, industrial sensor nodes, compact user-interface modules, building controls, wearable accessories, and low-cost embedded products requiring both analog measurement and digital connectivity. The 806 ksps ADC supports fast analog sampling, while the CapSense hardware can accelerate touch detection and reduce firmware overhead.

PCB implementation requires careful placement of decoupling capacitors and a continuous ground-plane reference for the exposed pad and high-speed digital signals. Power-supply sequencing, analog grounding, signal integrity, and thermal management should be evaluated under the worst operating conditions in the manufacturer application notes and device datasheet.

This page combines the device specifications, sourcing information, same-family drop-in alternatives, application guidance, and design considerations into a consolidated engineering resource for evaluating the CY8C4125LQI-483.

Аналоги без доработки для CY8C4125LQI-483 — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.

Варианты в этой серии

Модели той же серии, совместимые без доработки с CY8C4125LQI-483 (тот же форм-фактор и посадочное место) — отличается по ADC Resolution, Package.

Infineon
ADC Resolution: 12 bits
Package: 44-pin TQFP, 10 mm × 10 mm
Сравнить с CY8C4125LQI-483 →

CY8C4127LQI-483

✅ Прямая замена ⚠️ Характеристики не проверены
📦 40-QFN (6x6)
Same 40-QFN footprint and CY8C4100 resource layout; CPU and memory details require confirmation against the device tables.

📋 Справочный аналог (нет в каталоге)

CY8C4145LQI-483

✅ Прямая замена ⚠️ Характеристики не проверены
📦 40-QFN (6x6)
Same 40-QFN footprint; higher performance tier changes CPU frequency by approximately 100% relative to the 24 MHz target.

📋 Справочный аналог (нет в каталоге)

CY8C4147LQI-483

✅ Прямая замена ⚠️ Характеристики не проверены
📦 40-QFN (6x6)
Same 40-QFN footprint; higher performance tier changes CPU frequency by approximately 100% relative to the 24 MHz target.

📋 Справочный аналог (нет в каталоге)

CY8C4245LQI-483

✅ Прямая замена ⚠️ Характеристики не проверены
📦 40-QFN (6x6)
Same 40-QFN footprint; higher CY8C4200 performance tier changes CPU frequency by approximately 100% relative to the 24 MHz target.

📋 Справочный аналог (нет в каталоге)

CY8C4247LQI-483

✅ Прямая замена ⚠️ Характеристики не проверены
📦 40-QFN (6x6)
Same 40-QFN footprint; higher CY8C4200 performance tier changes CPU frequency by approximately 100% relative to the 24 MHz target.

📋 Справочный аналог (нет в каталоге)

CY8C4125LQI-483 Максимальные параметры и электрические характеристики

Product Type PSoC 4 programmable system-on-chip microcontroller
CPU Core Arm Cortex-M0, 32-bit
Maximum CPU Frequency 24 MHz
Program Memory 32 KB flash
SRAM 4 KB
General-Purpose I/O 34 GPIO
ADC Resolution 12 bit
ADC Type Successive-approximation register (SAR)
ADC Conversion Rate 806 ksps
Timer Counter and PWM Blocks 4 configurable 16-bit blocks
Supply Voltage Options 2.5 V, 3.3 V, or 5 V
Корпус 40-QFN, 6 mm x 6 mm
Тип монтажа Surface mount
Touch-Sensing Support Dedicated CapSense block
Programmable Peripheral Routing Any GPIO to any digital or analog peripheral
Shipping Package Tray

Руководство по цоколевке CY8C4125LQI-483 в корпусе tray

Цоколевка для CY8C4125LQI-483 (корпус tray). Эта цифровая ИС включает выводы GPIO, интерфейсы связи (UART, SPI, I2C) и выводы питания. Обратитесь к техническому описанию производителя для альтернативных функций выводов и вариантов конфигурации. Необходимо для проектирования встраиваемых систем и трассировки печатных плат.

Схема цоколевки корпуса tray для CY8C4125LQI-483

Нет подробных данных о распиновке для CY8C4125LQI-483.

Обратитесь к даташиту для полной конфигурации выводов.

Типичное применение

CY8C4125LQI-483 подходит для 6 применениеs: Capacitive Touch Control Panels, Industrial Sensor Nodes, Building and HVAC Controls, Wearable and Personal Electronics, Compact Data Acquisition Modules, Automated Equipment and HMI Modules.

📱

Capacitive Touch Control Panels

The CY8C4125LQI-483 fits capacitive touch controls because its dedicated CapSense block can evaluate touch electrodes while the Arm Cortex-M0 core handles user-interface logic at up to 24 MHz. The 34 GPIOs provide connections for LEDs, haptic feedback, and other controls without requiring a separate host processor. Place the touch electrodes and sensing components away from switching-current paths, maintain the ground reference described in the manufacturer hardware guidance, and validate sensitivity across temperature, humidity, and enclosure materials.

🏭

Industrial Sensor Nodes

The 12-bit SAR ADC at 806 ksps makes the CY8C4125LQI-483 suitable for compact industrial sensor nodes that must acquire analog measurements and perform local processing. Its 32 KB flash accommodates control firmware, while 4 KB SRAM supports protocol handling, filtering, and status data. The 40-QFN 6 mm by 6 mm package saves board area, although exposed-pad heat spreading and analog grounding remain important. Confirm the ADC source impedance, acquisition time, and input range during schematic design.

🏭

Building and HVAC Controls

The CY8C4125LQI-483 can consolidate sensing, touch input, timers, and communications in a distributed building-control node. Its four configurable 16-bit timer, counter, and PWM blocks are useful for periodic sensing, actuator timing, and motor or valve control, while the programmable peripheral fabric helps match pins to the board layout. The 24 MHz core is adequate for supervisory logic, but control-loop latency and communication interrupt load should be profiled. Local decoupling and a continuous ground plane reduce digital noise on analog measurements.

📱

Wearable and Personal Electronics

The compact 40-QFN package and mixed-signal integration make the CY8C4125LQI-483 useful in wearable accessories and personal electronic products combining capacitive controls, analog sensing, and low-rate communications. The Cortex-M0 core supports compact real-time logic without a large application processor, while 32 KB flash provides room for a focused firmware image. Power consumption depends on active peripherals and clock configuration, so select the lowest operating mode that preserves response time. Confirm board size, exposed-pad access, and antenna layout during mechanical design.

📟

Compact Data Acquisition Modules

With a 12-bit SAR ADC capable of 806 ksps, the CY8C4125LQI-483 can form the core of a compact acquisition module that samples analog signals and performs initial filtering or classification. Its programmable GPIO fabric allows digital triggers, status indicators, and communication interfaces to be assigned around the analog inputs. Sampling throughput must be evaluated together with channel-switching overhead, firmware processing time, and the ADC acquisition network. Use short, quiet analog traces and provide decoupling close to the device pins.

🔧

Automated Equipment and HMI Modules

The CY8C4125LQI-483 supports compact human-machine interface modules that combine buttons or capacitive controls, status LEDs, analog monitoring, and machine-state logic. The 24 MHz Cortex-M0 processor is suitable for deterministic user-interface and supervisory tasks, and the programmable peripheral fabric simplifies routing around a constrained 40-QFN pinout. Four configurable 16-bit timer blocks can handle periodic UI updates or actuator timing. Validate update latency, ESD protection, and grounding to keep user input reliable in electrically noisy equipment.

Сводка рекомендуемых товаров

CY8C4127LQI-483 Same-family touch-capable PSoC alternative Используется в: Capacitive Touch Control Panels, Industrial Sensor Nodes, Wearable and Personal Electronics, Compact Data Acquisition Modules CY8C4145LQI-483 Higher-performance same-family control option Используется в: Capacitive Touch Control Panels, Wearable and Personal Electronics, Automated Equipment and HMI Modules CY8C4245LQI-483 Higher-resource same-family sensor option Используется в: Industrial Sensor Nodes, Compact Data Acquisition Modules CY8C4147LQI-483 Higher-performance control-system alternative Используется в: Building and HVAC Controls, Automated Equipment and HMI Modules CY8C4247LQI-483 Expanded-performance same-family alternative Используется в: Building and HVAC Controls
Where can I download the CY8C4125LQI-483 datasheet PDF?
The CY8C4125LQI-483 datasheet and product documentation are available through the official Infineon part page at https://www.infineon.com/part/CY8C4125LQI-483. The manufacturer page links the device data sheet, package information, ordering details, and related technical documentation. Use that source when assigning the 40-QFN pin functions or confirming electrical limits, because third-party copies may not identify the latest document revision.
What are the key specifications of CY8C4125LQI-483 that engineers should know?
The CY8C4125LQI-483 combines a 32-bit Arm Cortex-M0 processor, 24 MHz maximum operating frequency, 32 KB flash, 4 KB SRAM, 34 GPIOs, and a 12-bit SAR ADC operating at 806 ksps. According to the Infineon manufacturer product page, it is a PSoC 4100 device in a 40-QFN package measuring 6 mm by 6 mm. A dedicated CapSense block and four configurable 16-bit timer, counter, and PWM blocks broaden its utility for touch and embedded-control designs.
What can replace CY8C4125LQI-483?
The closest replacements are pin-compatible members of the CY8C4100 family that use the same 40-QFN 6 mm by 6 mm footprint, including CY8C4145LQI-483, CY8C4127LQI-483, CY8C4245LQI-483, CY8C4247LQI-483, and CY8C4147LQI-483. Their CPU frequency, memory capacity, or peripheral resources differ, so a replacement should be selected only after checking the pin description table and application requirements in the manufacturer documentation.
Is CY8C4125LQI-483 the same as CY8C4145LQI-483?
No, the CY8C4145LQI-483 is not electrically identical to the CY8C4125LQI-483 even though both are members of the CY8C4100 family and use a comparable QFN footprint. The principal difference is performance and resource allocation: the target operates up to 24 MHz, while the CY8C4145 variant belongs to a higher-performance family tier. Verify pin-level compatibility, clock limits, memory, and peripheral assignments before substituting one for the other.
CY8C4125LQI-483 vs CY8C4245LQI-483: which is better for a control application?
Choose the CY8C4125LQI-483 when a 24 MHz Cortex-M0 design with 32 KB flash and 4 KB SRAM is sufficient. Choose the CY8C4245LQI-483 when the additional processing and memory capability of the higher CY8C4200 tier is needed. Both use the CY8C4100-family software ecosystem, but the higher-tier part can consume more power and cost more. Confirm that the selected variant retains the required package pins and analog resources.
When should I choose CY8C4125LQI-483 over a higher-performance PSoC 4 device?
Choose the CY8C4125LQI-483 when the system operates at 24 MHz or below, 32 KB of flash and 4 KB of SRAM are adequate, and the 34 available GPIOs plus 12-bit SAR ADC satisfy the design. It is suitable for focused embedded-control and touch-sensing products where a higher clock, larger memory, or additional processing would add unnecessary cost, board space, and power consumption. Validate the margin in the worst-case firmware build before release.
Is CY8C4125LQI-483 suitable for capacitive touch and sensor applications?
Yes, the CY8C4125LQI-483 is suitable for capacitive touch and analog-sensing designs because it combines a dedicated CapSense block with a 12-bit SAR ADC operating at 806 ksps. The programmable digital fabric can route peripherals to GPIO resources, allowing sensor inputs, touch controls, timers, and communications to share the device efficiently. Board-level sensor performance still depends on trace layout, grounding, calibration, and the selected CapSense configuration.
How much power does the CY8C4125LQI-483 require?
The CY8C4125LQI-483 supports 2.5 V, 3.3 V, and 5 V operation, but the exact current consumption depends on clock frequency, active peripherals, GPIO state, temperature, and the selected power mode. According to the manufacturer datasheet, use the operating-current and sleep-current tables for the intended configuration. The 40-QFN package also requires its exposed thermal pad to be connected to the ground plane for proper heat spreading.
What is the pinout of the 40-QFN CY8C4125LQI-483?
The CY8C4125LQI-483 uses a 40-QFN package with an exposed pad, and its numbered pins include power, ground, GPIO, analog, and programming-related functions. The authoritative assignments are listed in the manufacturer datasheet pin-description table and package drawing. Use the official 40-QFN land pattern and pin table during PCB layout; do not infer missing pin functions from the 34-GPIO count because the package also includes power and dedicated peripheral connections.
Where can I buy CY8C4125LQI-483 and check current lead time?
Use the Request a Quote form on this page to request CY8C4125LQI-483 pricing, stock confirmation, minimum order quantity, and current lead time. The manufacturer part page is https://www.infineon.com/part/CY8C4125LQI-483. Commercial terms can vary with package format, quantity, and fulfillment method, so request a quotation for the exact MPN and the quantity required for production.
What is the price of CY8C4125LQI-483?
Current pricing for the CY8C4125LQI-483 depends on order quantity, packaging, and market conditions. Use the Request a Quote form on this page for the current unit price and volume breaks. Quote requests should identify the exact CY8C4125LQI-483 MPN, required tray or other packing format, production quantity, delivery location, and requested schedule.
Is CY8C4125LQI-483 in stock?
Stock availability for the CY8C4125LQI-483 changes according to inventory and replenishment timing. Use the Request a Quote form on this page to obtain a current availability confirmation and the lead time associated with the requested quantity. Specify the exact MPN CY8C4125LQI-483 and the required packaging so the response reflects the production part rather than a related tray, tape-and-reel, or grade variant.
How do I troubleshoot a CY8C4125LQI-483 design that will not start?
Begin by confirming power, ground, reset behavior, boot configuration, and debug connectivity before changing firmware. Verify that the 6 mm by 6 mm 40-QFN orientation and exposed-pad connection match the manufacturer footprint, then inspect the power rails for sequencing or brownout problems. Confirm that the programmed image targets the CY8C4125LQI-483 device and that the clock configuration remains within the 24 MHz maximum operating frequency.
Which tools and software are compatible with CY8C4125LQI-483?
The CY8C4125LQI-483 is supported by the PSoC 4 embedded-development environment for device configuration, programming, debugging, and peripheral setup. The exact tool version should be checked against Infineon's device-support documentation because software releases can add or retire device packs. A compatible debugger, programming adapter, target headers, and the appropriate PSoC 4 family device pack are required for development and production programming.
Is CY8C4125LQI-483 RoHS compliant and automotive qualified?
The RoHS and REACH status of the CY8C4125LQI-483 must be confirmed from the current manufacturer product page or material-compliance declaration; it is not automatically qualified for automotive use. The ordering information identifies the device as a commercial PSoC 4100 MCU, not as an AEC-Q100 automotive variant. Request the current compliance documents through the Request a Quote form when a formally compliant procurement record is required.
What is the best drop-in replacement for CY8C4125LQI-483?
The best same-footprint replacement depends on which target parameter cannot be changed: speed, memory, or peripheral availability. CY8C4145LQI-483 is a higher-speed same-family option, while CY8C4127LQI-483 is the closer-speed option when memory and peripherals remain suitable. The higher-tier CY8C4245LQI-483, CY8C4247LQI-483, and CY8C4147LQI-483 alternatives provide more capability but may require firmware and power-budget review. Confirm every pin against the manufacturer tables.

Справочные инженерные данные для CY8C4125LQI-483 — сравнение, рекомендации по проектированию и информация о соответствии.

Руководство по выбору

Choose the CY8C4125LQI-483 for compact embedded products that need a 24 MHz Cortex-M0 core, 32 KB flash, 4 KB SRAM, 34 GPIOs, capacitive-touch support, and a 12-bit SAR ADC rated at 806 ksps. It is a practical fit for touch controls, industrial sensor nodes, building-control modules, and compact HMI designs where a higher-tier MCU would add resource and power requirements without improving the end product. The CY8C4127LQI-483 is the closest same-family starting point when timing and peripheral details align. Use CY8C4145LQI-483 or CY8C4147LQI-483 when additional processing performance materially improves control-loop or firmware behavior. Use CY8C4245LQI-483 or CY8C4247LQI-483 for larger software workloads or expanded resources. For every alternative, verify the 40-QFN pin assignments, exposed-pad connection, clock limits, boot behavior, ADC channels, and peripheral conflicts against the manufacturer documentation before approving a substitution.

Сравнение с аналогами

Параметр Этот товар CY8C4127LQI-483 CY8C4145LQI-483 CY8C4245LQI-483 CY8C4247LQI-483 CY8C4147LQI-483
Brand Infineon Technologies Infineon Technologies Infineon Technologies Infineon Technologies Infineon Technologies Infineon Technologies
Package 40-QFN (6x6) 40-QFN (6x6) 40-QFN (6x6) 40-QFN (6x6) 40-QFN (6x6) 40-QFN (6x6)
CPU Core 32-bit Arm Cortex-M0 32-bit Arm Cortex-M0 32-bit Arm Cortex-M0 32-bit Arm Cortex-M0 32-bit Arm Cortex-M0 32-bit Arm Cortex-M0

Ключевые отличия

  • Balanced 24 MHz performance and memory for focused embedded-control designs (против CY8C4145LQI-483)
  • Integrated high-speed analog conversion (против CY8C4245LQI-483)
  • Dedicated CapSense hardware with programmable peripheral routing (против CY8C4247LQI-483)

Заметки по проектированию

Place the required bypass capacitors immediately beside the device power pins and connect the exposed pad to a low-impedance ground plane. The 40-QFN package has no bottom-side pins outside the thermal pad, so routing must use the manufacturer land pattern rather than a generic QFN footprint. Keep analog inputs away from switching nodes and maintain a quiet ground reference under the sensing circuitry.

Use the official 40-QFN pinout and land pattern without substituting pin assignments from another PSoC 4 density or performance grade. Confirm the device orientation, exposed-pad dimensions, solder-mask clearance, and paste pattern in the manufacturer package drawing. A footprint mismatch can shift every signal assignment even when the nominal package dimensions appear identical.

Validate startup, shutdown, brownout, and peripheral-state behavior across the required 2.5 V, 3.3 V, or 5 V operating condition. Do not assume that the CPU clock, ADC, and communication peripherals can all operate simultaneously at their maximum ratings. Use the manufacturer current tables to size the supply and verify that the exposed pad provides adequate thermal spreading.

A higher-frequency family member is not automatically a functional substitute for the CY8C4125LQI-483. Check the boot configuration, debug interface, GPIO mapping, ADC channels, clock tree, timer resources, and firmware target before replacing the device. In particular, confirm that unused pins have acceptable levels during reset and that no new peripheral instance conflicts with an existing board connection.

Информация о соответствии

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Без свинца
Unknown
Без галогенов
Unknown
Конфликтные минералы
Unknown

The manufacturer product page and distributor descriptions do not provide explicit compliance declarations for this exact MPN. The ordering code does not identify an automotive-qualified variant, so AEC-Q100 status is treated as not applicable rather than qualified.

Данные проверены: 2026-11-19 — данные проверены и курируются командой компонентной инженерии XAIPART

Похожие запросы

CY8C4125LQI-483 datasheet CY8C4125LQI-483 pinout CY8C4125LQI-483 datasheet pdf CY8C4125LQI-483 equivalent CY8C4125LQI-483 replacement CY8C4125LQI-483 vs CY8C4145LQI-483 CY8C4125LQI-483 footprint CY8C4125LQI-483 price CY8C4125LQI-483 stock Infineon CY8C4125LQI-483 CY8C4125LQI-483 40-QFN pinout CY8C4125LQI-483 CapSense application

Связанные компоненты & термины

Infineon Technologies Cypress Semiconductor CY8C4125LQI-483 CY8C4127LQI-483 CY8C4145LQI-483 CY8C4147LQI-483 CY8C4245LQI-483 CY8C4247LQI-483 PSoC 4 PSoC 4100 PSoC 4200 Arm Cortex-M0 microcontroller programmable system-on-chip embedded processor semiconductor 32-bit 24 MHz 32 KB flash 4 KB SRAM 34 GPIO 12-bit SAR ADC 806 ksps CapSense 40-QFN QFN family surface-mount 40-QFN 6x6 mm RoHS REACH AEC-Q100
Быстрый запрос цены (RFQ)
Заполните все данные — наша команда продаж ответит в течение 24 часов
Артикул Производитель Корпус QTY Целевая цена Итого
✓
Запрос цены отправлен!

Мы ответим на ваш email в течение 24 часов

1
RFQ отправлен
2
Предложение получено
3
Заказ оформлен
4
Оплата
5
Отправлено
6
Доставлено
Просмотреть детали RFQ