CYBLE-222014-01 - Bluetooth 4.2 LE Module, 256KB Flash | Infineon
Артикул: CYBLE-222014-01 ✓ Активен| Кол-во | Цена за ед. | Итого |
|---|---|---|
| 1 | $9.84 | $9,84 |
| 10 | $8.97 | $89,70 |
| 100 | $7.95 | $795,00 |
| 500 | $6.92 | $3.460,00 |
| 1.000 | $6.14 | $6.140,00 |
CYBLE-222014-01 Обзор
An EZ-BLE module is a fully integrated, regulatory-certified Bluetooth Low Energy (BLE) turnkey solution that combines a Bluetooth radio, microcontroller, crystal oscillators, passive components, and a chip antenna into a single reflow-solderable package, eliminating the need for RF design expertise and significantly accelerating wireless product development.
Key features include a royalty-free BLE stack compatible with Bluetooth 4.2 (and stack-upgradable to Bluetooth 5.x on compatible parts), an integrated 2.4 GHz transceiver with on-module chip antenna, up to 16 GPIOs, four serial communication blocks, four TCPWMs, an ADC, and onboard 32 kHz and main crystals. The module includes built-in security features and supports in-system programming via SWD.
Architecturally, the CYBLE-222014-01 leverages Cypress's PSoC 4 programmable system-on-chip with CapSense touch-sensing capability, enabling flexible peripheral routing and capacitive touch buttons or sliders without external components. The integrated chip antenna is impedance-matched on the module, so designers can avoid the most common cause of BLE range failures: a poorly matched PCB trace antenna.
Typical applications include IoT sensor nodes, BLE beacons, fitness and wearable devices, smart-home actuators, industrial wireless sensors, and any compact battery-powered product that needs certified wireless connectivity without an RF layout cycle.
When designing with this module, follow Infineon's reference antenna keep-out region on the host PCB around the chip antenna, supply the module with a clean 1.9 V to 5.5 V rail with a decoupling cap within 5 mm of the VBAT pin, and verify regulatory output power limits in your target market.
This page synthesizes distributor pricing, drop-in compatible module alternatives, and practical RF layout notes specific to the CYBLE-222014-01 that the Infineon datasheet alone does not surface, helping engineers compare candidates quickly.
Аналоги без доработки для CYBLE-222014-01 — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.
Варианты в этой серии
Модели той же серии, совместимые без доработки с CYBLE-222014-01 (тот же форм-фактор и посадочное место) — отличается по Antenna, Bluetooth Version, Core, Flash Memory, Frequency Band.
Инструмент быстрого сравнения — выберите альтернативные компоненты для сравнения бок о бок:
CYBLE-022001-00
✅ Прямая замена✓ В наличии
$6.4 / шт.
Открыть даташит →CYBLE-222005-00
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
CYBLE-013025-EVAL
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
CYBLE-222014-01 Характеристики (опубликованы производителем)
| Module Type | EZ-BLE PRoC Bluetooth 4.2 Transceiver Module |
| Bluetooth Version | Bluetooth Low Energy 4.2 (stack upgradable to 5.1 on compatible variants) |
| Core | Arm Cortex-M0 / Cypress PSoC 4 BLE (PRoC BLE) |
| Flash Memory | 256 KB |
| SRAM | 32 KB |
| Operating Voltage | 1.9 V to 5.5 V |
| Frequency Band | 2.4 GHz (2402 MHz to 2480 MHz) |
| Number of Channels | 40 BLE channels |
| Modulation | GFSK |
| Maximum GPIOs | 16 |
| Interfaces | I2C, UART, SPI, PWM, ADC |
| Antenna | Integrated chip antenna (on-module) |
| Crystal Oscillators | 32 kHz (WCO) + main crystal included |
| Package / Dimensions | SMD Module, 10 mm x 10 mm x 1.80 mm |
| Тип монтажа | Surface Mount (reflow) |
| Статус RoHS | Compliant |
| Certifications | FCC, IC, CE, MIC, KC (per module datasheet) |
| Programming Interface | SWD / I2C (over HCI mode) |
Конфигурация выводов CYBLE-222014-01
| Контакт 1 | GND — Ground |
| Контакт 2 | VBAT — Module supply input, 1.9 V to 5.5 V |
| Контакт 3 | GND — Ground |
| Контакт 4 | XRES — External reset, active low |
| Контакт 5 | SWDIO — Serial Wire Debug I/O (programming) |
| Контакт 6 | SWDCLK — Serial Wire Debug clock |
| Контакт 7 | HCI_TX — HCI UART TX (if used in HCI mode) |
| Контакт 8 | HCI_RX — HCI UART RX (if used in HCI mode) |
| Контакт 9 | P0[0] — GPIO / CapSense / PWM / TCPWM / I2C / SPI |
| Контакт 10 | P0[1] — GPIO / CapSense / PWM / TCPWM / I2C / SPI |
| Контакт 11 | P0[2] — GPIO / CapSense / PWM / TCPWM / I2C / SPI |
| Контакт 12 | P0[3] — GPIO / CapSense / PWM / TCPWM / I2C / SPI |
| Контакт 13 | P1[0] — GPIO / TCPWM / UART / SPI |
| Контакт 14 | P1[1] — GPIO / TCPWM / UART / SPI |
| Контакт 15 | P1[2] — GPIO / TCPWM / UART / SPI |
| Контакт 16 | P1[3] — GPIO / TCPWM / UART / SPI |
| Контакт 17 | P2[0] — GPIO / TCPWM / UART / SPI |
| Контакт 18 | P2[1] — GPIO / TCPWM / UART / SPI |
| Контакт 19 | P2[2] — GPIO / TCPWM / UART / SPI |
| Контакт 20 | P2[3] — GPIO / TCPWM / UART / SPI |
Типичное применение
CYBLE-222014-01 подходит для 7 применениеs: IoT Wireless Sensor Nodes, BLE Beacons and Proximity Trackers, Fitness Bands and Wearables, Smart Home Actuators and Light Switches, Industrial Wireless Sensor Backhaul, Capacitive Touch BLE Remotes, Battery-Powered BLE HID Devices.
IoT Wireless Sensor Nodes
The CYBLE-222014-01 is well suited to coin-cell powered IoT sensor nodes such as temperature, humidity, or door/window sensors. The 1.9 V to 5.5 V supply range accommodates Li-ion, CR2032 coin cells, and 3.3 V rails directly, while 256 KB flash supports BLE 5.x stack plus application code and OTA staging. Its integrated chip antenna eliminates an external RF match network, shrinking the host PCB. Compared to a discrete BLE SoC + PCB antenna, the module drops approximately 8-12 dB of radiated efficiency variation across batches because the antenna is factory tuned.
Рекомендуется
BLE Beacons and Proximity Trackers
For BLE beacons (iBeacon, Eddystone, or AltBeacon) the CYBLE-222014-01 offers 256 KB of flash to hold multiple beacon profiles and the broadcaster firmware, plus a Bluetooth 5.1-capable stack when upgraded. The module's sub-3 mA average TX current at 0 dBm and deep sleep current well below 10 uA extend coin-cell runtime to years. The pre-certified FCC/IC/CE modular approval lets a product ship globally without an additional intentional radiator filing, a key reason proximity trackers increasingly favor Infineon EZ-BLE modules over discrete SoC designs.
Рекомендуется
Fitness Bands and Wearables
Wearable fitness bands benefit from the CYBLE-222014-01's 10 x 10 x 1.8 mm footprint, which fits easily inside a 20 mm wristband cavity. The 16 GPIO budget can drive an OLED display over I2C, two PWM-driven vibration motors, an SPI heart-rate sensor, and still leave pins for capacitive touch button inputs. Built-in CapSense on PSoC 4 lets a single pin replace a mechanical button, reducing BOM and improving water resistance. Bluetooth 4.2 LE's secure connections (LE-SC) provide the cryptographic pairing that modern fitness platforms require.
Рекомендуется
Smart Home Actuators and Light Switches
Smart light switches and motorized blinds use the CYBLE-222014-01 to expose a BLE-paired control path into a Wi-Fi gateway without pulling mains wiring into the RF section. Its 1.9 V to 5.5 V range drops directly onto a 3.3 V LDO fed by the same flyback that powers a relay, while the 5 V tolerance protects against rectified-120/230 VAC noise spikes. Up to 4 TCPWMs supply PWM-driven LED feedback, and the SWD interface supports in-system firmware updates without disassembly, simplifying compliance sign-off for retrofit residential products.
Рекомендуется
Industrial Wireless Sensor Backhaul
Industrial sensor nodes that retrofit existing equipment often run on 24 V loops and need a wireless retrofit without draining the loop budget. The CYBLE-222014-01's 5.5 V tolerance lets it tap a 24 V line through a simple LDO like the MIC29151T-3.3G referenced in the Site MPN list. Across a typical factory floor, line-of-sight range with the chip antenna reaches 50-80 m at 0 dBm - sufficient for asset-tracking tags and rotary-machine vibration nodes. The 256 KB flash supports OPC UA over BLE or vendor-specific telemetry payloads.
Рекомендуется
Capacitive Touch BLE Remotes
The CYBLE-222014-01's PSoC 4 BLE silicon includes Cypress's CapSense capacitive touch IP, allowing designers to replace mechanical buttons with touch sliders or wheels without extra components. In a TV/AV remote, 8-12 CapSense-capable pins plus 4 TCPWMs cover full IR-translator support, USB-C charging control, and the BLE HID interface simultaneously. The result is a sealed, splash-resistant remote in a 1.8 mm tall package, achievable in a single reflow flow on a standard 4-layer FR-4 PCB.
Рекомендуется
Battery-Powered BLE HID Devices
The CYBLE-222014-01 fits BLE keyboards, presentation clickers, and stylus peripherals where 256 KB flash stores both the HID profile and the device-specific gesture or keymap logic. Up to 16 GPIOs tolerate multi-key matrix scanning over multiple Port pins, while Bluetooth 4.2 LE's enhanced ATT MTU reaches 247 bytes per packet - ample for keyboard reports with n-key rollover. The 1.9 V-5.5 V range pairs cleanly with a single-cell Li-Po and an internal boost, plus low deep-sleep current allows months of standby per charge.
Рекомендуется
Сводка рекомендуемых товаров
Справочные инженерные данные для CYBLE-222014-01 — сравнение, рекомендации по проектированию и информация о соответствии.
Руководство по выбору
Сравнение с аналогами
| Параметр | Этот товар | CYBLE-022001-00 | CYBLE-222005-00 | CYBLE-013025-EVAL |
|---|---|---|---|---|
| Package / Footprint | SMD Module, 10 x 10 x 1.80 mm | SMD Module, 10 x 10 x 1.80 mm - same | SMD Module, 10 x 10 x 1.80 mm - same | SMD Module, 10 x 10 mm - same |
| Brand | Infineon | Infineon | Infineon | Infineon |
| Bluetooth Version | BLE 4.2 | BLE 4.1 | BLE 4.1 | BLE 4.2 |
| Supply Voltage | 1.9 V to 5.5 V | 1.9 V to 5.5 V | 1.9 V to 5.5 V | 1.9 V to 5.5 V |
| Maximum GPIOs | 16 | 16 | 16 | 16 |
| Integrated Antenna | Yes (chip) | Yes (chip) | Yes (chip) | Yes (chip) |
| Core | Arm Cortex-M0 / PSoC 4 | Arm Cortex-M0 / PSoC 4 | Arm Cortex-M0 / PSoC 4 | Arm Cortex-M0 / PSoC 4 |
Ключевые отличия
- Largest flash within the drop-in footprint family (против CYBLE-022001-00)
- Bluetooth 4.2 LE secure connections + 5.1-capable stack (против CYBLE-222005-00)
- Pre-certified modular approval in FCC/IC/CE/MIC/KC (против CYBLE-013025-EVAL)
Заметки по проектированию
The CYBLE-222014-01 datasheet specifies an antenna keep-out region in all four copper layers around the chip antenna, typically a 7 mm x 5 mm clear zone at the corner of the host PCB. Place any traces, ground pour, batteries, or metal shields outside this zone to preserve the pre-tuned antenna's VSWR and radiated efficiency. Bringing the antenna within 5 mm of a ground plane can detune resonance and shrink range by 30-50%.
Place a 10 uF ceramic decoupling capacitor within 5 mm of the VBAT pin on the host PCB and parallel it with a 0.1 uF X7R cap. The 5.5 V max rating of VBAT means a simple AC-rectified 5 V supply or a single-cell Li-ion 4.2 V feed is acceptable; nevertheless, ensure ripple is below 50 mV pk-pk because the internal regulator's PSRR rolls off above 1 MHz.
The module's max power dissipation is around 0.25 W during continuous BLE TX at 0 dBm, giving a Theta_JA near 50 C/W on a 4-layer 1 oz PCB. This is far from a thermal limit, but enclosing the module inside a sealed plastic housing without a thermal vent can trap heat during continuous TX. Estimated: TJ rise stays below 15 C at 0 dBm / 1 s TX every 5 s in a typical sensor beacon duty cycle.
Do not route GPIO traces under the chip antenna even if they carry only slow digital signals. The antenna radiates and receives BLE in the 2.4 GHz ISM band; coupled GPIO noise above 100 MHz can desensitize RX paths. Also avoid mounting a coin-cell directly under the antenna corner - cell can and battery leads couple RF into the antenna and shift resonance by 30-50 MHz.
Информация о соответствии
RoHS and REACH compliance stated on the Infineon product page. Modular radio approvals (FCC, IC, CE, MIC, KC) are listed in the module datasheet. AEC-Q100 is not applicable - this is a commercial/industrial BLE module, not an automotive-grade part.
