CYBLE-022001-00 - Bluetooth LE 4.1 PSoC 4 Module 128 KB | Infineon
Артикул: CYBLE-022001-00 ✓ Активен| Кол-во | Цена за ед. | Итого |
|---|---|---|
| 1 | $9.44 | $9,44 |
| 10 | $8.6 | $86,00 |
| 100 | $7.78 | $778,00 |
| 500 | $7.05 | $3.525,00 |
| 1.000 | $6.4 | $6.400,00 |
CYBLE-022001-00 Обзор
An RF transceiver module (also called an RF module or BLE module) is a pre-certified subsystem that bundles a radio IC, matching network, crystal, antenna, and optional microcontroller into a single tested hardware unit, eliminating the need for designers to qualify the RF chain themselves. The CYBLE-022001-00 sits in the RF & Wireless > RF Modules subcategory of the broader Power/Connectivity semiconductor ecosystem and supports Bluetooth v4.1 LE with a 1 Mbps air data rate over the 2.4 GHz ISM band.
Key features include 16 configurable GPIOs (with exposed ADC, PWM, UART, SPI, and I2C peripherals), an integrated ARM Cortex-M0 core, -92 dBm RX sensitivity for extended range, and up to +3 dBm programmable TX output power. Module-level FCC/IC/CE/MIC regulatory certifications substantially reduce end-product qualification time.
Architecture depth: The module is built around the Infineon PSoC 4 BLE silicon (CYBL1XX7X family), which combines a 32-bit ARM Cortex-M0 CPU, configurable analog and digital blocks (the famous PSoC UDB/PLD fabric), CapSense touch support, and a 2.4 GHz radio. An onboard 32 kHz watch crystal and a 24 MHz main crystal are included, plus all RF matching components and the chip antenna. Flash is 128 KB, SRAM is 16 KB.
Typical applications include BLE beaconing wearables, wireless HID peripherals (keyboards/mice/remote controls), industrial sensor telemetry nodes, smart-home lighting controllers, medical device accessory links, and proximity/marketing beacons where a small, certified, low-power radio drop is required.
Design consideration: Because the module is pre-certified, no antenna-matching network is required - the user PCB only needs to expose the 10 x 10 mm land pattern and reserve adequate clearance around the antenna keep-out zone to maintain radiated performance.
This page synthesizes distributor pricing, drop-in compatible module variants (CYBLE-222005-00, CYBLE-222014-01), and practical design notes not found in the manufacturer datasheet alone.
Аналоги без доработки для CYBLE-022001-00 — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.
Варианты в этой серии
Модели той же серии, совместимые без доработки с CYBLE-022001-00 (тот же форм-фактор и посадочное место) — отличается по Antenna, Bluetooth Version, Core, Flash Memory, Frequency Band.
Инструмент быстрого сравнения — выберите альтернативные компоненты для сравнения бок о бок:
CYBLE-222005-00
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
CYBLE-222014-01
✅ Прямая замена✓ В наличии
$6.14 / шт.
Открыть даташит →CYBLE-013025-00
✅ Прямая замена ⚠️ Характеристики не проверены📋 Справочный аналог (нет в каталоге)
CYBLE-212019-00
✅ Прямая замена ⚠️ Характеристики не проверены📋 Справочный аналог (нет в каталоге)
CYBLE-202007-00
✅ Прямая замена ⚠️ Характеристики не проверены📋 Справочный аналог (нет в каталоге)
CYBLE-022001-00 Характеристики (опубликованы производителем)
| Product Type | Bluetooth Low Energy Module |
| Series | EZ-BLE PRoC |
| Bluetooth Version | Bluetooth v4.1 LE |
| Frequency Band | 2.4 GHz ISM |
| Maximum Air Data Rate | 1 Mbps |
| Core | ARM Cortex-M0 (PSoC 4 BLE) |
| Flash Memory | 128 KB |
| GPIOs | 16 |
| Package / Module Size | 10 mm x 10 mm x 1.80 mm |
| Тип монтажа | Surface Mount |
| Antenna | Integrated chip antenna |
| Onboard Crystal | 32 kHz watch + 24 MHz main |
| Статус RoHS | Compliant |
Интерфейсы и разъемы CYBLE-022001-00
CYBLE-022001-00 имеет следующие интерфейсы и разъемы, опубликованные производителем: Bluetooth. Цоколевка разъемов расширения, нумерация контактов разъемов и электрические пределы определены в документации производителя.
| Bluetooth | Bluetooth v4.1 LE |
Обратитесь к документации производителя для полной распиновки разъёма расширения и нумерации контактов соединителя.
Типичное применение
CYBLE-022001-00 подходит для 6 применениеs: BLE Beaconing Wearables, Wireless HID Peripherals (Keyboard/Mouse/Remote), Industrial Sensor Telemetry Nodes, Smart-Home Lighting Controllers, Medical Device Accessory Links, Proximity and Marketing Beacons.
BLE Beaconing Wearables
The CYBLE-022001-00 is well suited for iBeacon/Eddystone beacons and BLE-wearable devices thanks to its 2.4 GHz integrated chip antenna, pre-certified FCC/IC/CE/MIC radio compliance, and PSoC 4 BLE low-power modes. With 128 KB flash and 16 KB SRAM it has plenty of room for the BLE stack plus beacon profile and battery estimation firmware, while the 10 x 10 x 1.80 mm footprint fits wristbands and pendants. Placed on a small coin-cell PCB, the module streams advertising packets at hundreds of ms intervals while drawing micro-amps in deep-sleep - much simpler than designing a discrete radio chain.
Рекомендуется
Wireless HID Peripherals (Keyboard/Mouse/Remote)
The CYBLE-022001-00 powers BLE Human Interface Device peripherals: Bluetooth Low Energy keyboards, mice, presentation remotes, game controllers. The PSoC 4 BLE silicon's 16 GPIOs can scan keyboard matrices, drive PWM motor feedback, and host the BLE HID-over-GATT profile in firmware, while the integrated chip antenna removes the need for an external antenna and the module's small footprint fits thin consumer enclosures. Unlike a bare BLE SoC, the module arrives pre-certified so end-product CE/FCC testing wraps faster.
Рекомендуется
Industrial Sensor Telemetry Nodes
Industrial sensor telemetry nodes for BLE-to-cloud bridging commonly use the CYBLE-022001-00 because the 128 KB flash hosts the BLE stack plus sensor drivers and OTA-bootloader, and the ARM Cortex-M0 core runs low-energy advertising intervals in the seconds-to-minutes range for sub-mA average current. The 16 GPIO count handles UART/SPI sensor interfaces plus digital I/O for control loops. The module's temperature tolerance and small footprint let it drop onto remote sensor PCBs retrofitted into existing 4-20 mA wiring.
Рекомендуется
Smart-Home Lighting Controllers
Smart-home lighting and smart-lighting controllers use the CYBLE-022001-00 as a BLE-comms front-end to mains-dimmable LED drivers. The 16 GPIOs drive PWM outputs (PSoC 4 BLE has TCPWM blocks) for flicker-free dimming, while the BLE radio connects to phone apps for color and brightness commands. The pre-certified module avoids the FCC/IC retest cycle that custom RF designs would force on the OEM lighting fixture. For multi-protocol hubs (BLE+Zigbee+Thread), consider the upgraded CYBLE-222005-00 with twice the flash.
Рекомендуется
Medical Device Accessory Links
The CYBLE-022001-00 fits medical device accessory links (BLE glucose meter dongles, smart inhaler add-ons, BLE thermometer gateways) because the PSoC 4 BLE silicon includes a SAR ADC, CapSense touch, and a Crypto block for secure pairing. The 128 KB flash holds the medical BLE profile plus device-side encrypted log buffer, while the 10 x 10 mm module shrinks the dongle PCB area. Designers favor the pre-certified 2.4 GHz radio here because accessory-level FDA submissions only need to confirm the radio module is unmodified.
Рекомендуется
Proximity and Marketing Beacons
BLE proximity and marketing-beacon products (retail beacons, indoor navigation, asset tracking tags) deploy the CYBLE-022001-00 because it ships with a BLE stack that already implements GATT services used by iBeacon/Eddystone/AltBeacon profile frameworks. The integrated chip antenna and onboard 32 kHz/24 MHz crystals shrink the BOM to almost zero external parts, extending coin-cell battery life to months or years depending on advertising interval. Upgrading to CYBLE-222005-00 yields more flash for multi-protocol beacon firmware if needed.
Рекомендуется
Сводка рекомендуемых товаров
Справочные инженерные данные для CYBLE-022001-00 — сравнение, рекомендации по проектированию и информация о соответствии.
Руководство по выбору
Сравнение с аналогами
| Параметр | Этот товар | CYBLE-222005-00 | CYBLE-222014-01 | CYBLE-013025-00 | CYBLE-212019-00 | CYBLE-202007-00 |
|---|---|---|---|---|---|---|
| Package | 10 x 10 x 1.80 mm module | 10 x 10 x 1.80 mm module (same) | 10 x 10 x 1.80 mm module (same family) | 10 x 10 x 1.80 mm module (same family) | 10 x 10 x 1.80 mm module (same family) | 10 x 10 x 1.80 mm module (same family) |
| Brand | Infineon (was Cypress) | Infineon | Infineon | Infineon | Infineon | Infineon |
| Flash Memory | 128 KB | 256 KB | 256 KB | 256 KB | 256 KB | 256 KB |
| Bluetooth Version | v4.1 LE | v4.2 LE | v5.0 LE | v5.0 LE | v5.1 LE | v5.1 LE |
| Module Certification | FCC/IC/CE/MIC pre-certified | FCC/IC/CE/MIC pre-certified | FCC/IC/CE/MIC pre-certified | FCC/IC/CE pre-certified | FCC/IC/CE pre-certified | FCC/IC/CE pre-certified |
| Antenna | Integrated chip antenna | Integrated chip antenna | Integrated chip antenna | Integrated chip antenna | Integrated chip antenna | Integrated chip antenna |
Ключевые отличия
- Largest flash in same-price drop-in footprint (против CYBLE-222005-00)
- Lower entry cost vs newer Bluetooth 5 variants (против CYBLE-222014-01 (BT 5.0))
- Module-level FCC/IC/CE/MIC pre-certification (против Bare PSoC 4 BLE SoC)
- 16 programmable GPIOs in 10 x 10 mm (против Larger competitor BLE modules)
Заметки по проектированию
Reserve a copper-free keep-out zone under and around the chip antenna per the CYBLE-022001-00 datasheet antenna footprint. No ground plane, traces, or copper pour should be placed under the antenna area, and the antenna should be near a board edge with free space for radiated patterns. Estimated: the keep-out zone typically measures ~5 x 5 mm on a 1.6 mm FR-4 board; placing copper too close degrades return loss and range even though the module is pre-certified.
Place a 1 uF X7R ceramic decoupling capacitor within 3 mm of the module's VDD pad and a 4.7 uF bulk capacitor on the same rail to handle BLE TX current spikes (transient draw can exceed 15 mA during a packet burst). Estimated: at 3.3 V VDD and -20 dBm to +3 dBm output power, average current is sub-15 mA but peaks during TX burst; insufficient decoupling causes brownouts and dropped packets. PSoC 4 BLE deep-sleep current is in the low micro-amps but only with all GPIOs configured correctly - see the silicon datasheet for routing retention rules.
Do not assume module-level FCC/IC/CE certification transfers if the customer PCB adds significant RF-disturbing structures near the antenna (coin-cell batteries, large copper fills, or metal enclosures). The pre-certification covers only the unmodified module in its reference test fixture. A second round of intentional radiator testing in the final enclosure is the OEM's responsibility. Also confirm the firmware-side CYBLE-222005-00 vs CYBLE-022001-00 retargeting is done in PSoC Creator before taping out - the BLE stack and pin map differ even with identical PCB footprints.
Keep the castellated module edge pads clean and avoid solder-mask openings larger than the pad itself. Reflow profile should follow JEDEC J-STD-020 MSL-3 conditions (peak 245 C). Use a 4-6 mil solder paste deposit and ensure castellated edges receive adequate paste volume - insufficient solder on the edge pads is the number-one cause of field failures in production CYBLE modules per Infineon application notes.
Информация о соответствии
Module-level FCC, IC (Canada), CE (Europe), MIC (Japan), KC (Korea) certifications per the Infineon/Cypress datasheet. RoHS and lead-free confirmed by Infineon product page; halogen-free status not explicitly listed in the verified excerpts. AEC-Q100 not applicable for a Bluetooth module.
