DG213DY - 4-Channel CMOS Analog Switch | Vishay Intertechnology
Артикул: DG213DY ✓ АктивенDG213DY Обзор
An analog switch is an integrated semiconductor that connects or disconnects signal paths under digital control. The DG213DY belongs to the analog-switch hierarchy, which includes multiplexers, demultiplexers, selectors, and switch matrices. Its four independent 1:1 circuits can route instrumentation signals, process-control inputs, or peripheral signals while presenting a high-impedance state when a channel is turned off. The on-resistance specification of 45 ohms and leakage specification of 20 pA help engineers balance insertion loss, signal integrity, and off-channel isolation.
Key features include a 22 V supply-voltage rating, TTL- and CMOS-compatible logic levels, 45-ohm low on-resistance, 20 pA low leakage, an 85 ns fast turn-on time, single-supply operation, and an extended temperature range. The improved charge-injection compensation design reduces switching transients, while the epitaxial construction helps prevent latchup. A continuous current rating of 30 mA allows the switch to handle low-power analog and instrumentation signals without exceeding its specified current limit.
The DG213DY uses complementary CMOS circuitry to provide low power consumption and bidirectional signal paths when the supply configuration permits it. Its wide operating-voltage range makes it useful in systems that need to select between positive, negative, or ground-referenced signals. Engineers should still observe the datasheet limits for supply voltage, logic levels, analog signal range, and continuous current because the switch is intended primarily for low-voltage, low-current routing rather than power switching.
Typical applications include telecommunications signal routing, process-control systems, computer-peripheral interfaces, test and measurement equipment, data-acquisition systems, and industrial control modules. The 16-pin narrow SOIC package supports compact PCB layouts, while the four switch circuits allow one device to replace several discrete switching functions. The 30 mA continuous-current capability is suitable for instrumentation signals but does not make the device a power-switching solution.
When laying out a DG213DY circuit, place the device close to the routed signals and provide a stable, low-impedance bypass connection between its supply pins and ground. Keep sensitive analog traces short, avoid using the analog switch to carry current outside the specified range, and observe the control-logic thresholds before changing system voltage levels. Check the pin configuration and truth table in the manufacturer datasheet when connecting control signals or supplying from a single rail.
This product page combines the manufacturer electrical characteristics, verified distributor identification, package details, drop-in replacement analysis, and practical guidance for signal-routing and layout decisions. It also distinguishes the original DG213DY from lead-free and alternate packaging identifiers so procurement teams can evaluate board compatibility and lifecycle needs without changing the circuit footprint.
Аналоги без доработки для DG213DY — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.
DG213DY-E3
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
ADG413BRZ-REEL
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
DG213DY Максимальные параметры и электрические характеристики
| Number of Circuits | 4 circuits |
| Switch Configuration | 1:1 |
| Low On-Resistance | 45 ohm |
| Rated On-Resistance | 60 ohm |
| Off Leakage Current | 20 pA |
| Turn-On Time | 85 ns |
| Supply Voltage Rating | 22 V |
| Single-Supply Operating Range | 13 V to 36 V |
| Dual-Supply Operating Range | +/-7 V to +/-22 V |
| Continuous Current Rating | 30 mA |
| Logic Compatibility | TTL and CMOS |
| Диапазон рабочих температур | -40 C to +85 C |
| Корпус | 16-pin narrow SOIC |
| Тип монтажа | Surface mount |
| Latchup Protection | Epitaxial layer |
| Switching Transient Control | Improved charge-injection compensation |
Руководство по цоколевке DG213DY в корпусе 16-pin narrow soic
Цоколевка для DG213DY (корпус 16-pin narrow soic). Нумерация выводов, функции и схемы подключения определены в техническом описании производителя. Обратитесь к нему для точного посадочного места и рекомендаций по пайке.
Нет подробных данных о распиновке для DG213DY.
Обратитесь к даташиту для полной конфигурации выводов.
Типичное применение
DG213DY подходит для 6 применениеs: Test and Measurement Signal Routing, Process-Control Signal Conditioning, Data-Acquisition Multiplexing, Telecommunications Signal Routing, Computer-Peripheral Interface Switching, Industrial Control Signal Isolation.
Test and Measurement Signal Routing
The DG213DY fits test and measurement systems that must route several low-level analog inputs under instrument-control logic. Its four 1:1 circuits provide a practical way to connect or isolate measurement paths without using four separate discrete switch packages. The 45-ohm low on-resistance limits added attenuation, while 20 pA leakage helps reduce errors when the instrument handles high-impedance sources. The 85 ns turn-on time supports reasonably fast measurement sequencing. Design the fixture so source and load impedances, node capacitance, and the 30 mA continuous-current limit remain within the manufacturer’s recommended operating conditions.
Рекомендуется
Process-Control Signal Conditioning
The DG213DY can route sensor or actuator signals in process-control electronics where compact, TTL-compatible control is useful. A 22 V supply-voltage rating and the availability of single-supply operation allow integration with industrial signal-chain architectures, while the 45-ohm on-resistance is suitable for many low-current sensor inputs. The improved charge-injection compensation design helps limit switching transients that could disturb downstream circuitry. The 30 mA continuous-current rating must be checked against each switched path, and the control inputs should remain within the datasheet’s defined TTL or CMOS logic thresholds.
Рекомендуется
Data-Acquisition Multiplexing
The DG213DY supports compact data-acquisition front ends that must connect multiple inputs to measurement circuitry. Its four independent 1:1 channels can isolate unused sources, and the 60-ohm rated on-resistance provides a defined resistance for designing acquisition timing and attenuation. Low 20 pA leakage is particularly useful with high-impedance sensors, where input bias effects could otherwise dominate. The 85 ns turn-on time helps acquisition controllers implement rapid channel sequencing. Account for switch capacitance, source impedance, settling time, and the 30 mA current limit when defining the acquisition bandwidth and sensor excitation limits.
Рекомендуется
Telecommunications Signal Routing
The Vishay DG213 datasheet identifies telecommunications as an intended application for the DG213DY, making it suitable for routing low-power signals in communication equipment. The four 1:1 switch circuits can select among sources without requiring a large multiplexing footprint, and the narrow 16-pin SOIC package conserves board area. A 45-ohm low on-resistance helps limit insertion loss, while the 30 mA continuous-current rating accommodates many low-current communication paths. The 22 V supply rating provides useful design headroom, but the analog signal amplitude, supply configuration, and logic thresholds must remain within the manufacturer’s absolute-maximum and recommended conditions.
Рекомендуется
Computer-Peripheral Interface Switching
The DG213DY can implement auxiliary signal routing in computer-peripheral and interface-control equipment. Its TTL-compatible logic simplifies connection to digital controllers, and the four 1:1 circuits allow peripheral lines to be connected, disconnected, or isolated in a compact 16-pin SOIC package. The 20 pA leakage specification helps preserve high-impedance peripheral signals, while the 85 ns turn-on time is suitable for many control and isolation sequences. Designers should verify whether the switched signal is unipolar or bipolar, maintain the specified 30 mA current ceiling, and ensure that transitions do not create harmful coupling in adjacent high-speed routes.
Рекомендуется
Industrial Control Signal Isolation
The DG213DY is useful in industrial control modules that isolate a sensitive analog path from a shared bus or alternate signal source. Its 1:1 topology preserves signal polarity, the 45-ohm low on-resistance provides predictable attenuation, and the improved charge-injection compensation reduces transient disturbance during state changes. The 22 V supply rating and 30 mA continuous-current capability suit many low-power control boards, while the -40 C to +85 C ordering range covers extended industrial environments. Confirm isolation behavior in the actual circuit: an analog switch provides a high-impedance disconnected state, but its off-channel characteristics and logic states must meet the system’s safety requirements.
Рекомендуется
Сводка рекомендуемых товаров
Справочные инженерные данные для DG213DY — сравнение, рекомендации по проектированию и информация о соответствии.
Руководство по выбору
Сравнение с аналогами
| Параметр | Этот товар | DG213DY-E3 | ADG413BRZ-REEL |
|---|---|---|---|
| Brand | Vishay Intertechnology | Vishay Intertechnology | Analog Devices |
| Package | 16-pin narrow SOIC | 16-pin narrow SOIC | 16-pin SOIC |
Ключевые отличия
- Four-channel integration in a narrow 16-pin SOIC (против ADG413BRZ-REEL)
- Direct same-brand ordering alternative (против DG213DY-E3)
- Low leakage for sensitive analog routing (против ADG413BRZ-REEL)
Заметки по проектированию
Treat the DG213DY as a low-current analog switch rather than a power switch. Its listed continuous-current rating is 30 mA, so resistor-limited signals and downstream protection must prevent overload. Also use the exact voltage ratings from the manufacturer datasheet; a 22 V supply-voltage rating does not mean every signal node may safely reach 22 V under all control states.
Route each switched signal with a short, continuous path and place the DG213DY close to the source and destination circuitry. Avoid sharing narrow analog traces with digital clocks or fast-switching nodes. Keep the supply bypass connection short and place its capacitor at the device, because long supply loops can reduce effective decoupling and allow switching transients to propagate through the analog path.
Include the 45-ohm low on-resistance and 60-ohm rated on-resistance when calculating insertion loss for high-impedance sources or unusually sensitive amplifier inputs. The 20 pA leakage value is also relevant to source impedance calculations. Validate settling behavior with the actual source resistance, load capacitance, control timing, and external filtering because the 85 ns turn-on figure alone does not define complete signal-channel bandwidth.
Информация о соответствии
The DG213DY-E3 ordering version is documented as lead-free and RoHS compliant, but those statements were not established for the base DG213DY identifier. Automotive qualification is not applicable to this general-purpose analog switch.