Vishay Intertechnology

DG213DY - 4-Channel CMOS Analog Switch | Vishay Intertechnology

MPN: DG213DY ✓ نشط
22 V Vdss 20 pA Id 45 ohm Rds(on) 16-pin narrow SOIC Package
الحد الأدنى للطلب: 1 |

DG213DY نظرة عامة

Vishay Intertechnology DG213DY is a four-circuit, 1:1 CMOS analog switch with a typical on-resistance of 45 ohms, 60-ohm rated on-resistance, 20 pA leakage, and an 85 ns turn-on time. It is supplied in a 16-pin narrow SOIC package and supports TTL- and CMOS-compatible control logic. The device can operate from a single supply or dual supplies, with a 22 V supply-voltage rating.

An analog switch is an integrated semiconductor that connects or disconnects signal paths under digital control. The DG213DY belongs to the analog-switch hierarchy, which includes multiplexers, demultiplexers, selectors, and switch matrices. Its four independent 1:1 circuits can route instrumentation signals, process-control inputs, or peripheral signals while presenting a high-impedance state when a channel is turned off. The on-resistance specification of 45 ohms and leakage specification of 20 pA help engineers balance insertion loss, signal integrity, and off-channel isolation.

Key features include a 22 V supply-voltage rating, TTL- and CMOS-compatible logic levels, 45-ohm low on-resistance, 20 pA low leakage, an 85 ns fast turn-on time, single-supply operation, and an extended temperature range. The improved charge-injection compensation design reduces switching transients, while the epitaxial construction helps prevent latchup. A continuous current rating of 30 mA allows the switch to handle low-power analog and instrumentation signals without exceeding its specified current limit.

The DG213DY uses complementary CMOS circuitry to provide low power consumption and bidirectional signal paths when the supply configuration permits it. Its wide operating-voltage range makes it useful in systems that need to select between positive, negative, or ground-referenced signals. Engineers should still observe the datasheet limits for supply voltage, logic levels, analog signal range, and continuous current because the switch is intended primarily for low-voltage, low-current routing rather than power switching.

Typical applications include telecommunications signal routing, process-control systems, computer-peripheral interfaces, test and measurement equipment, data-acquisition systems, and industrial control modules. The 16-pin narrow SOIC package supports compact PCB layouts, while the four switch circuits allow one device to replace several discrete switching functions. The 30 mA continuous-current capability is suitable for instrumentation signals but does not make the device a power-switching solution.

When laying out a DG213DY circuit, place the device close to the routed signals and provide a stable, low-impedance bypass connection between its supply pins and ground. Keep sensitive analog traces short, avoid using the analog switch to carry current outside the specified range, and observe the control-logic thresholds before changing system voltage levels. Check the pin configuration and truth table in the manufacturer datasheet when connecting control signals or supplying from a single rail.

This product page combines the manufacturer electrical characteristics, verified distributor identification, package details, drop-in replacement analysis, and practical guidance for signal-routing and layout decisions. It also distinguishes the original DG213DY from lead-free and alternate packaging identifiers so procurement teams can evaluate board compatibility and lifecycle needs without changing the circuit footprint.

بدائل مباشرة لـ DG213DY — نفس الحزمة، متوافق دبوس بدبوس. تُستثنى القطع ذات الحزم المختلفة التي تتطلب تعديل PCB.

DG213DY-E3

✅ بديل مباشر
📦 16-pin narrow SOIC
Same 4-circuit 1:1 configuration, 60 ohm rated on-resistance, and 16-pin SOIC footprint; the E3 ordering code identifies the lead-free version, with 0 ohm on-resistance difference.

📋 بديل مرجعي (غير موجود في الكتالوج)

ADG413BRZ-REEL

✅ بديل مباشر
📦 16-pin SOIC
Cross-brand 16-pin SOIC candidate identified by a replacement comparison; the DG213DY uses 60 ohm rated on-resistance and up to 22 V supplies, while the available ADG413BRZ-REEL rating values are not established.

📋 بديل مرجعي (غير موجود في الكتالوج)

DG213DY الحدود القصوى والخصائص الكهربائية

Number of Circuits 4 circuits
Switch Configuration 1:1
Low On-Resistance 45 ohm
Rated On-Resistance 60 ohm
Off Leakage Current 20 pA
Turn-On Time 85 ns
Supply Voltage Rating 22 V
Single-Supply Operating Range 13 V to 36 V
Dual-Supply Operating Range +/-7 V to +/-22 V
Continuous Current Rating 30 mA
Logic Compatibility TTL and CMOS
نطاق درجة حرارة التشغيل -40 C to +85 C
العلبة 16-pin narrow SOIC
نوع التركيب Surface mount
Latchup Protection Epitaxial layer
Switching Transient Control Improved charge-injection compensation

دليل تكوين أطراف DG213DY 16-pin narrow soic

تكوين الأطراف لـ DG213DY (حزمة 16-pin narrow soic). يتم تعريف ترقيم الأطراف والوظائف ومخططات التوصيل في ورقة البيانات الفنية من الشركة المصنعة. راجعها للحصول على البصمة الدقيقة وإرشادات اللحام.

مخطط توزيع أطراف حزمة 16-pin narrow soic لـ DG213DY

لا تتوفر بيانات مفصلة لمخطط التوصيلات لـ DG213DY.

راجع ورقة البيانات للحصول على تكوين الأطراف الكامل.

التطبيقات النموذجية

DG213DY مناسب لـ 6 التطبيقs: Test and Measurement Signal Routing, Process-Control Signal Conditioning, Data-Acquisition Multiplexing, Telecommunications Signal Routing, Computer-Peripheral Interface Switching, Industrial Control Signal Isolation.

📊

Test and Measurement Signal Routing

The DG213DY fits test and measurement systems that must route several low-level analog inputs under instrument-control logic. Its four 1:1 circuits provide a practical way to connect or isolate measurement paths without using four separate discrete switch packages. The 45-ohm low on-resistance limits added attenuation, while 20 pA leakage helps reduce errors when the instrument handles high-impedance sources. The 85 ns turn-on time supports reasonably fast measurement sequencing. Design the fixture so source and load impedances, node capacitance, and the 30 mA continuous-current limit remain within the manufacturer’s recommended operating conditions.

🏭

Process-Control Signal Conditioning

The DG213DY can route sensor or actuator signals in process-control electronics where compact, TTL-compatible control is useful. A 22 V supply-voltage rating and the availability of single-supply operation allow integration with industrial signal-chain architectures, while the 45-ohm on-resistance is suitable for many low-current sensor inputs. The improved charge-injection compensation design helps limit switching transients that could disturb downstream circuitry. The 30 mA continuous-current rating must be checked against each switched path, and the control inputs should remain within the datasheet’s defined TTL or CMOS logic thresholds.

🖥️

Data-Acquisition Multiplexing

The DG213DY supports compact data-acquisition front ends that must connect multiple inputs to measurement circuitry. Its four independent 1:1 channels can isolate unused sources, and the 60-ohm rated on-resistance provides a defined resistance for designing acquisition timing and attenuation. Low 20 pA leakage is particularly useful with high-impedance sensors, where input bias effects could otherwise dominate. The 85 ns turn-on time helps acquisition controllers implement rapid channel sequencing. Account for switch capacitance, source impedance, settling time, and the 30 mA current limit when defining the acquisition bandwidth and sensor excitation limits.

🌐

Telecommunications Signal Routing

The Vishay DG213 datasheet identifies telecommunications as an intended application for the DG213DY, making it suitable for routing low-power signals in communication equipment. The four 1:1 switch circuits can select among sources without requiring a large multiplexing footprint, and the narrow 16-pin SOIC package conserves board area. A 45-ohm low on-resistance helps limit insertion loss, while the 30 mA continuous-current rating accommodates many low-current communication paths. The 22 V supply rating provides useful design headroom, but the analog signal amplitude, supply configuration, and logic thresholds must remain within the manufacturer’s absolute-maximum and recommended conditions.

🔌

Computer-Peripheral Interface Switching

The DG213DY can implement auxiliary signal routing in computer-peripheral and interface-control equipment. Its TTL-compatible logic simplifies connection to digital controllers, and the four 1:1 circuits allow peripheral lines to be connected, disconnected, or isolated in a compact 16-pin SOIC package. The 20 pA leakage specification helps preserve high-impedance peripheral signals, while the 85 ns turn-on time is suitable for many control and isolation sequences. Designers should verify whether the switched signal is unipolar or bipolar, maintain the specified 30 mA current ceiling, and ensure that transitions do not create harmful coupling in adjacent high-speed routes.

⚡

Industrial Control Signal Isolation

The DG213DY is useful in industrial control modules that isolate a sensitive analog path from a shared bus or alternate signal source. Its 1:1 topology preserves signal polarity, the 45-ohm low on-resistance provides predictable attenuation, and the improved charge-injection compensation reduces transient disturbance during state changes. The 22 V supply rating and 30 mA continuous-current capability suit many low-power control boards, while the -40 C to +85 C ordering range covers extended industrial environments. Confirm isolation behavior in the actual circuit: an analog switch provides a high-impedance disconnected state, but its off-channel characteristics and logic states must meet the system’s safety requirements.

What is the DG213DY analog switch?
The DG213DY is a four-circuit, 1:1 CMOS analog switch from Vishay Intertechnology in a 16-pin narrow SOIC package. According to the Vishay DG213 datasheet, it combines a 45-ohm low on-resistance, 20 pA low leakage, and an 85 ns turn-on time with TTL- and CMOS-compatible control logic. It is intended for general-purpose signal routing in telecommunications, instrumentation, process control, and computer-peripheral systems.
How many switches and channels does DG213DY have?
The DG213DY contains four 1:1 switching circuits for independent analog-signal routing. DigiKey identifies the device as a 4-circuit, 1:1 analog switch with 60-ohm rated on-resistance. According to the Vishay DG213 datasheet, the complementary switching arrangement supports fast operation, while the 30 mA continuous-current rating makes the device appropriate for instrumentation and low-current signal paths rather than high-power loads.
What is the on-resistance and leakage of DG213DY?
The DG213DY features a 45-ohm low on-resistance and 20 pA leakage current. The Vishay DG213 datasheet also identifies a 60-ohm on-resistance rating for the switching circuits. These two figures describe different operating aspects of the device, so engineers should use the complete electrical characteristics table when calculating insertion loss, leakage-driven errors, and analog-signal attenuation.
Can DG213DY operate from a single supply?
Yes, the DG213DY supports single-supply operation. The Vishay DG213 datasheet lists a 22 V supply-voltage rating and identifies single-supply operation as a device feature. Distributor technical summaries report a 13 V to 36 V single-supply range and a +/-7 V to +/-22 V dual-supply range. Confirm the exact configuration, logic thresholds, and signal limits against the manufacturer specifications before implementation.
Where can I download the DG213DY datasheet PDF?
The official DG213DY datasheet PDF is available from Vishay at https://www.vishay.com/docs/70662/dg213.pdf. The document contains the electrical characteristics, ordering information, truth table, functional diagram, and pin configuration. Use the ordering table to verify that DG213DY corresponds to the 16-pin narrow SOIC package and the -40 C to +85 C temperature range before releasing a design.
Where is the DG213DY pinout?
The DG213DY pin configuration is shown in the Vishay DG213 manufacturer datasheet. Use the pin-configuration diagram and accompanying truth table when connecting the four analog paths, control inputs, supply rails, and ground. The DG213DY is ordered in a 16-pin narrow SOIC package, so its footprint is 16-pin SOIC-16 rather than a TSSOP or DIP arrangement.
What is the switching speed of DG213DY?
The DG213DY has a specified turn-on time of 85 ns. According to the Vishay DG213 datasheet, this fast switching characteristic supports signal-routing applications where the control interval is limited. Actual transition behavior also depends on supply voltage, logic input levels, source and load impedances, and the capacitance of the connected node, so timing should be validated in the final circuit.
Is DG213DY suitable for instrumentation and process control?
Yes, the DG213DY is suitable for instrumentation and process-control signal routing. The Vishay DG213 datasheet identifies telecommunications, instrumentation, process control, and computer peripherals as intended applications. Its 45-ohm low on-resistance, 20 pA leakage, and improved charge-injection compensation help preserve low-level signals, while the 30 mA continuous-current limit must be respected.
Can ADG413BRZ-REEL replace the DG213DY?
The ADG413BRZ-REEL is a cross-brand candidate identified in the available replacement comparison, but final substitution still requires schematic and pin-level review. The available listing does not establish every DG213DY operating parameter for the ADG413BRZ-REEL, including supply range, leakage, and logic thresholds. Confirm those ratings and the pin configuration in both manufacturer datasheets before approving a drop-in replacement.
What is the best drop-in replacement for DG213DY?
No alternative in the available cross-reference results provides a fully verified five-part drop-in set. DG213DY-E3 is the closest same-brand option because it retains the 16-pin SOIC package, four 1:1 circuits, and 60-ohm rated on-resistance; its documented distinction is the E3 lead-free designation. ADG413BRZ-REEL is a cross-brand candidate, but its complete electrical equivalence requires engineering verification.
What can replace DG213DY?
DG213DY-E3 is the most direct same-brand replacement candidate because it uses the same 16-pin SOIC footprint and retains four 1:1 switch circuits with 60-ohm rated on-resistance. The E3 identifier denotes the lead-free ordering version. For a cross-brand replacement, ADG413BRZ-REEL appears in an available comparison, but its voltage, logic, leakage, and timing limits must be checked against the DG213DY requirements.
Is DG213DY the same as DG213DY-E3?
DG213DY-E3 has the same core device configuration as DG213DY: four 1:1 circuits, a 16-pin SOIC package, and a 60-ohm rated on-resistance. The documented E3 difference is its lead-free ordering designation, which is relevant for environmental-compliance procurement. Check the manufacturer ordering table for temperature, package, and termination details before treating the two identifiers as fully interchangeable.
When should I choose DG213DY over DG213DY-E3?
Choose DG213DY when the established original ordering configuration is required by the product specification or approved BOM. Choose DG213DY-E3 when its documented lead-free designation satisfies the procurement requirement while preserving the 16-pin SOIC footprint and four-channel 1:1 switching function. Both should be checked against the current manufacturer ordering table for temperature range, package form, and lifecycle status.
Where can I buy DG213DY online?
Use the Request a Quote form on this page to request current DG213DY availability, minimum order quantity, and lead time. The structured listing information confirms the exact 16-pin SOIC MPN and describes current distributor inventory activity, but it does not provide a stable customer price table. The XAIPART quote form is the appropriate channel for current commercial terms.
What is the price and lead time for DG213DY?
Request the current DG213DY price and lead time through the Request a Quote form on this page. The available product records identify the exact MPN and package but do not print a qualifying quantity-break schedule that can be reproduced as current pricing evidence. A written quotation also helps confirm stock, MOQ, delivery terms, and any date-sensitive component-cycle constraints.

بيانات مرجعية هندسية لـ DG213DY — المقارنة وإرشادات التصميم ومعلومات الامتثال.

دليل الاختيار

Choose the DG213DY for compact, four-channel 1:1 analog routing when the circuit needs TTL- or CMOS-compatible control, a 22 V supply-voltage rating, 45-ohm low on-resistance, and 20 pA leakage in a 16-pin narrow SOIC. Choose DG213DY-E3 when the same electrical and package configuration is required with the documented E3 lead-free ordering designation. Consider ADG413BRZ-REEL only after reviewing its complete pinout, supply range, logic thresholds, leakage, timing, and current rating against the DG213DY; the available comparison supports a 16-pin SOIC candidate but does not establish identical electrical performance. Neither alternative should replace the original solely because its package has the same pin count. The DG213DY is preferable where the 30 mA continuous-current rating, 85 ns turn-on time, charge-injection compensation, and established DG213 family behavior are central to the design.

المقارنة مع البدائل

المعامل هذا المنتج DG213DY-E3 ADG413BRZ-REEL
Brand Vishay Intertechnology Vishay Intertechnology Analog Devices
Package 16-pin narrow SOIC 16-pin narrow SOIC 16-pin SOIC

أبرز الفروقات

  • Four-channel integration in a narrow 16-pin SOIC (مقابلADG413BRZ-REEL)
  • Direct same-brand ordering alternative (مقابلDG213DY-E3)
  • Low leakage for sensitive analog routing (مقابلADG413BRZ-REEL)

ملاحظات التصميم

Treat the DG213DY as a low-current analog switch rather than a power switch. Its listed continuous-current rating is 30 mA, so resistor-limited signals and downstream protection must prevent overload. Also use the exact voltage ratings from the manufacturer datasheet; a 22 V supply-voltage rating does not mean every signal node may safely reach 22 V under all control states.

Route each switched signal with a short, continuous path and place the DG213DY close to the source and destination circuitry. Avoid sharing narrow analog traces with digital clocks or fast-switching nodes. Keep the supply bypass connection short and place its capacitor at the device, because long supply loops can reduce effective decoupling and allow switching transients to propagate through the analog path.

Include the 45-ohm low on-resistance and 60-ohm rated on-resistance when calculating insertion loss for high-impedance sources or unusually sensitive amplifier inputs. The 20 pA leakage value is also relevant to source impedance calculations. Validate settling behavior with the actual source resistance, load capacitance, control timing, and external filtering because the 85 ns turn-on figure alone does not define complete signal-channel bandwidth.

معلومات الامتثال

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
خالٍ من الرصاص
Unknown
خالٍ من الهالوجين
Unknown
المعادن المتنازع عليها
Unknown

The DG213DY-E3 ordering version is documented as lead-free and RoHS compliant, but those statements were not established for the base DG213DY identifier. Automotive qualification is not applicable to this general-purpose analog switch.

تم التحقق من البيانات في: 2026-11-10 — تم التحقق من البيانات وتنسيقها بواسطة فريق هندسة المكونات في XAIPART

عمليات بحث ذات صلة

DG213DY datasheet DG213DY pinout DG213DY datasheet pdf DG213DY equivalent DG213DY replacement DG213DY cross reference DG213DY vs ADG413BRZ-REEL DG213DY 16 pin SOIC DG213DY on resistance DG213DY switching time DG213DY instrumentation application DG213DY price Vishay Intertechnology DG213DY

المكونات والمصطلحات ذات الصلة

Vishay Intertechnology DG213DY DG213DY-E3 ADG413BRZ-REEL Analog Devices CMOS analog switch analog switch analog multiplexer interface IC semiconductor TTL-compatible logic CMOS-compatible logic on-resistance off leakage current charge injection turn-on time single-supply operation dual-supply operation 16-pin narrow SOIC SOIC family surface-mount package signal routing process control instrumentation RoHS REACH AEC-Q100
عرض سعر سريع RFQ
املأ التفاصيل الكاملة — سيرد فريق المبيعات لدينا خلال 24 ساعة
رقم القطعة الشركة المصنعة الحزمة QTY السعر المستهدف الإجمالي
✓
تم إرسال عرض السعر!

سنرد على بريدك الإلكتروني خلال 24 ساعة

1
تم إرسال طلب عرض السعر
2
تم استلام عرض السعر
3
تم تقديم الطلب
4
الدفع
5
تم الشحن
6
تم التسليم
عرض تفاصيل طلب عرض السعر