Analog Devices

DG407DN+T Dual 8:1 CMOS Analog Mux | Analog Devices

Артикул: DG407DN+T ✓ Активен
100 ohms Rds(on) 28-pin PLCC, 11.51 mm × 11.51 mm Package
MOQ: 1 |

DG407DN+T Обзор

The Analog Devices DG407DN+T is an improved 16-channel, dual 8:1 CMOS analog multiplexer with a maximum on-state resistance of 100 ohms, 200 ns switch-on time, and a 28-pin PLCC package measuring 11.51 mm by 11.51 mm. It supports analog signal routing, data acquisition, communication systems, guidance and control systems, sample-and-hold circuits, and test equipment. The device is designed for TTL- and CMOS-compatible address and enable control, making it suitable for multiplexed measurement and signal-selection systems.

An analog multiplexer is an integrated switching circuit that connects one of several analog inputs to a shared output according to digital address logic. The dual 8:1 architecture provides two independent 8:1 multiplexer sections, while the differential configuration can support sixteen single-ended channels or eight differential channels. This places the DG407DN+T within the hierarchy of analog switch IC, multiplexer, interface IC, and semiconductor.

Key characteristics include a maximum on-resistance of 100 ohms, a switch-on time of 200 ns, and an operating temperature range from -40 °C to +85 °C. Its CMOS implementation supports low-power mixed-signal systems, while the separate enable input allows a selected multiplexer section to participate in broader system control. The 28-PLCC package is intended for surface-mount assembly and provides a defined footprint for PCB layouts based on the device pinout.

The DG407 family is described by Analog Devices as an improved alternative to industry-standard DG406 and DG407 devices. Its address decoder accepts digital control signals, selects the requested analog path, and connects that path to the common output. Because switch resistance and transition time influence insertion loss and settling behavior, the 100-ohm resistance and 200 ns turn-on specification are important when designing acquisition chains or instrumentation with limited timing margin.

The manufacturer identifies audio signal routing, communication systems, data-acquisition systems, guidance and control systems, sample-and-hold circuits, and test equipment as suitable applications. These uses benefit from centralized analog-channel selection, reduced wiring complexity, and digital control of analog signals. In a data-acquisition system, the DG407DN+T can route multiple sensor or measurement inputs toward a shared converter while address logic selects the active source.

PCB design should follow the package drawing and pin-description table in the Analog Devices datasheet, particularly for supply decoupling and the location of the common terminals. Allow adequate signal settling before sampling after a channel change, and evaluate the 200 ns switching interval together with source impedance, capacitance, and converter acquisition requirements. Guard against input overvoltage, and ensure that control levels meet the device's TTL- or CMOS-compatible logic requirements.

This product record combines manufacturer application guidance, interface characteristics, package information, sourcing terms, and drop-in replacement analysis. It is intended to help engineers determine whether the DG407DN+T architecture, electrical limits, and 28-PLCC footprint fit a multiplexed analog signal-routing design.

Аналоги без доработки для DG407DN+T — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.

Варианты в этой серии

Модели той же серии, совместимые без доработки с DG407DN+T (тот же форм-фактор и посадочное место) — отличается по Maximum On-State Resistance, Multiplexer Configuration, Package.

Analog Devices
Maximum On-State Resistance: 100 ohm
Multiplexer Configuration: Dual 8:1
Package: 28-pin PLCC, 11.51 mm x 11.51 mm
Сравнить с DG407DN+T →

DG407DN+

✅ Прямая замена
Analog Devices
📦 28-PLCC (11.51 x 11.51 mm)
Dual 8:1 · 2 circuits · 100 ohm · 16 switches · TTL- and CMOS-compatible · 28-pin PLCC, 11.51 mm x 11.51 mm · Surface mount · Internal voltage reference

Уточнить цену

Открыть даташит →

DG407DN-T1

✅ Прямая замена
📦 28-PLCC (11.51 x 11.51 mm)
Same DG407 dual 8:1 configuration and 28-PLCC footprint; ordering code differs while the listed 100-ohm resistance and 200 ns switch-on time remain unchanged

📋 Справочный аналог (нет в каталоге)

DG407DN-T1-E3

✅ Прямая замена
📦 28-PLCC (11.51 x 11.51 mm)
Same 28-PLCC DG407 family footprint and dual 8:1 function; E3 ordering suffix distinguishes the part while listed resistance and switching performance remain unchanged

📋 Справочный аналог (нет в каталоге)

DG407DN+

✅ Прямая замена
Analog Devices
📦 28-PLCC (J-Lead)
Dual 8:1 · 2 circuits · 100 ohm · 16 switches · TTL- and CMOS-compatible · 28-pin PLCC, 11.51 mm x 11.51 mm · Surface mount · Internal voltage reference

Уточнить цену

Открыть даташит →

ADG407BPZ

✅ Прямая замена
📦 28-LCC
Cross-reference identifies the same dual 8:1 CMOS multiplexer class; DG407DN+T is rated at 100-ohm maximum resistance and 200 ns switch-on time, while ADG407BPZ numeric differences require datasheet verification

📋 Справочный аналог (нет в каталоге)

DG407DN+T Характеристики

Multiplexer Configuration Dual 8:1 multiplexer
Single-Ended Channel Count 16 channels
Differential Channel Count 8 channels
Maximum On-State Resistance 100 ohms
Switch-On Time 200 ns
Technology CMOS
Logic Compatibility TTL- and CMOS-compatible
Диапазон рабочих температур -40 °C to +85 °C
Корпус 28-pin PLCC, 11.51 mm × 11.51 mm
Number of Circuits 2 circuits
Number of Terminals 28 terminals
Тип монтажа Surface mount
Enable Function Device-section enable control
Digital Address Inputs 4-bit address control

Руководство по цоколевке DG407DN+T в корпусе 28-pin plcc, 11.51 mm × 11.51 mm

Цоколевка для DG407DN+T (корпус 28-pin plcc, 11.51 mm × 11.51 mm). Нумерация выводов, функции и схемы подключения определены в техническом описании производителя. Обратитесь к нему для точного посадочного места и рекомендаций по пайке.

Схема цоколевки корпуса 28-pin plcc, 11.51 mm × 11.51 mm для DG407DN+T

Нет подробных данных о распиновке для DG407DN+T.

Обратитесь к даташиту для полной конфигурации выводов.

Типичное применение

DG407DN+T подходит для 6 применениеs: Data Acquisition Systems, Test and Measurement Equipment, Audio Signal Routing, Communication Systems, Guidance and Control Systems, Sample-and-Hold Circuits.

🖥️

Data Acquisition Systems

The DG407DN+T fits multiplexed data-acquisition systems that must route multiple analog inputs to a shared converter or measurement channel. Its dual 8:1 organization supports 16 single-ended channels or 8 differential channels, reducing the number of external signal-routing connections. The 100-ohm maximum on-state resistance can be included in the source impedance budget, while the 200 ns switch-on time starts the settling interval. After changing the four-bit address, allow additional time for source capacitance, filters, wiring, and the receiving ADC to acquire the selected signal accurately.

🔧

Test and Measurement Equipment

The DG407DN+T is suited to test equipment that selects among several sensors, references, or injected signals without duplicating analog front-end circuitry. Two independent 8:1 sections can organize the routing architecture, and the address and enable inputs support deterministic control from a test controller. Designers should account for the 100-ohm maximum on-resistance and 200 ns switch-on time when defining measurement settling and timing margins. Accurate acquisition also depends on the selected source impedance, cable or PCB capacitance, protection networks, and the timing of the downstream measuring instrument.

🎧

Audio Signal Routing

The DG407DN+T can route multiple analog audio or control signals in a multi-source system while keeping channel selection under digital control. Analog Devices identifies audio signal routing as a DG407 application. The 100-ohm maximum on-state resistance introduces path loss that should be checked against the source and load impedances, particularly for low-amplitude signals. The 200 ns switch-on specification describes the device transition rather than complete signal settling, so the system must also account for capacitances, filtering, and the time required before the destination stage captures the selected waveform.

🌐

Communication Systems

The DG407DN+T is appropriate for communication equipment that selects among several analog channels, monitoring points, or interface signals. Its dual 8:1 structure permits compact routing of a larger number of single-ended or differential sources, while TTL- and CMOS-compatible address and enable control supports integration with digital logic. Signal-integrity planning should include the 100-ohm maximum switch resistance and the 200 ns turn-on interval. Route high-impedance or high-speed nodes carefully, keep return paths continuous, and verify settling at the bandwidth of the communication channel.

🏭

Guidance and Control Systems

The DG407DN+T can centralize analog command, feedback, or sensor selection in guidance and control equipment. The device's -40 °C to +85 °C industrial temperature range supports use across varied operating environments, and the two 8:1 sections provide a practical structure for organizing related signal groups. Engineers should verify that every analog input remains within the device's permitted signal range and that control levels satisfy the TTL- or CMOS-compatible logic requirements. Timing design should allow the 200 ns switching transition plus external settling before the control loop consumes a newly selected feedback signal.

⚡

Sample-and-Hold Circuits

The DG407DN+T can select the signal presented to a sample-and-hold stage in instrumentation requiring multiple analog sources. The dual 8:1 architecture permits a compact implementation with 16 single-ended or 8 differential selections, while digital address and enable control coordinates the transition. The 100-ohm maximum on-state resistance must be combined with the source impedance when calculating settling and acquisition behavior. The 200 ns switch-on time is only one portion of the recovery period; capacitor charging, switch capacitance, hold droop, and the sampling amplifier's input network also determine whether the captured value meets the system accuracy target.

Сводка рекомендуемых товаров

DG407DN Same-family 28-PLCC mux for multiplexed measurement routing Используется в: Data Acquisition Systems, Communication Systems, Sample-and-Hold Circuits ADG407BPZ Related dual 8:1 CMOS multiplexer family Используется в: Data Acquisition Systems, Test and Measurement Equipment, Communication Systems DG407DN-T1-E3 Same-family 28-PLCC alternative for test-signal routing Используется в: Test and Measurement Equipment, Guidance and Control Systems DG407DN+ Analog Devices Используется в: Audio Signal Routing, Guidance and Control Systems DG407DN-T1 Same-package family option for analog source selection Используется в: Audio Signal Routing, Sample-and-Hold Circuits
What is the function of the DG407DN+T analog multiplexer?
The DG407DN+T is an improved dual 8:1 CMOS analog multiplexer that can support 16 single-ended or 8 differential channels. According to the Analog Devices datasheet, it uses digital address and enable control to connect selected analog inputs to common outputs. Its 100-ohm maximum on-state resistance and 200 ns switch-on time make it suitable for signal routing, data acquisition, communication, guidance and control, sample-and-hold, and test-equipment systems.
What are the key specifications of DG407DN+T that engineers should know?
The DG407DN+T is a dual 8:1 CMOS analog multiplexer with 16 single-ended or 8 differential channels, a maximum on-state resistance of 100 ohms, and a 200 ns switch-on time. It operates from -40 °C to +85 °C and is packaged in a 28-pin PLCC measuring 11.51 mm by 11.51 mm. According to the Analog Devices datasheet, TTL- and CMOS-compatible control logic and an enable input support flexible system integration.
What is the supply voltage range of DG407DN+T?
The operating supply limits for the DG407DN+T must be taken from the electrical-characteristics table in the Analog Devices datasheet. The confirmed core specifications are its dual 8:1 configuration, 100-ohm maximum on-state resistance, 200 ns switch-on time, and -40 °C to +85 °C operating range. Before power-supply design or logic-interface connection, verify the supply and logic thresholds in the latest manufacturer documentation.
What is the maximum on-state resistance of DG407DN+T?
The DG407DN+T has a maximum on-state resistance of 100 ohms. According to the Analog Devices datasheet, this figure is part of the device's improved CMOS analog-switch characteristics and applies to the selected analog path. When designing a signal chain, include the 100-ohm switch resistance alongside source impedance and load capacitance because the total path resistance can influence attenuation and settling time.
How quickly does DG407DN+T turn on an analog channel?
The DG407DN+T has a specified switch-on time of 200 ns. According to the Analog Devices datasheet, engineers should use this transition interval when sequencing an address change and acquiring the resulting analog value. Practical acquisition systems also need to allow for source resistance, capacitance, filter delay, and the downstream converter's acquisition time rather than relying on the 200 ns switch-on specification alone.
What is the operating temperature range of DG407DN+T?
The DG407DN+T is specified for operation from -40 °C to +85 °C. According to the Analog Devices datasheet, it is an industrial-temperature CMOS analog multiplexer in a 28-pin PLCC package. PCB planning should preserve adequate clearance around the package and use a layout consistent with the manufacturer's land pattern so that the complete assembly can maintain reliable operation throughout the specified temperature range.
Where can I buy DG407DN+T online?
Use the Request a Quote form on this page to request DG407DN+T availability, lot information, and delivery terms. The confirmed manufacturer configuration is a 28-pin PLCC, 11.51 mm by 11.51 mm, with tape-and-reel ordering indicated by the DG407DN+T designation. The Analog Devices datasheet identifies the device as a production product, while current supply and lead time should be confirmed through the quotation workflow.
What is the price of DG407DN+T?
Submit a request through the Request a Quote form on this page for the current DG407DN+T price, quantity breaks, and delivery information. The product is a dual 8:1 CMOS analog multiplexer in a 28-pin PLCC package, with a 100-ohm maximum on-state resistance and 200 ns switch-on time. Pricing can vary with order quantity, traceability, packaging, and market conditions, so use the form rather than relying on a static listing.
What is the lead time for DG407DN+T?
The current lead time for DG407DN+T should be confirmed through the Request a Quote form on this page. Analog Devices lists the DG407 family as a production product, and the target configuration is the tape-and-reel 28-PLCC DG407DN+T. For production planning, request the confirmed manufacturing lead time, available date, minimum order quantity, and traceability requirements together with the quotation.
Is DG407DN+T the same as ADG407BPZ for pin-compatible replacement?
DG407DN+T and ADG407BPZ are related dual 8:1 CMOS analog multiplexers, but they are not identical MPNs and should not be treated as automatically interchangeable without reviewing every electrical and pin-function detail. The DG407DN+T has a documented 28-PLCC package, 100-ohm maximum on-state resistance, and 200 ns switch-on time. Use the manufacturer pin tables and electrical tables to verify address logic, enable polarity, supply limits, and timing.
What is the difference between DG407DN+T and ADG407BPZ?
The confirmed DG407DN+T ratings include a 100-ohm maximum on-state resistance, a 200 ns switch-on time, and operation from -40 °C to +85 °C in a 28-PLCC package. ADG407BPZ appears in cross-reference results for the same functional device class, but an exact numerical difference cannot be established from the listed product records. Check pin assignment, logic levels, enable polarity, leakage, capacitance, supply range, and timing before approving a substitution.
When should I choose DG407DN+T over ADG407BPZ?
Choose DG407DN+T when its documented 28-PLCC footprint, 100-ohm maximum on-state resistance, 200 ns switch-on time, and -40 °C to +85 °C range satisfy the design. Select ADG407BPZ only after confirming that its pin functions, supply requirements, logic thresholds, channel timing, and electrical limits match the existing board. The deciding factors should be application requirements rather than the similarity of the two function descriptions.
Is DG407DN+T suitable for data acquisition and sample-and-hold systems?
Yes, the DG407DN+T is suitable for data-acquisition and sample-and-hold systems when the selected path resistance and switching time meet the measurement bandwidth. Analog Devices lists data acquisition, sample-and-hold circuits, and test equipment among the DG407 applications. The 100-ohm maximum on-state resistance, 200 ns switch-on time, and 16-channel single-ended capability allow centralized routing, but the complete settling interval must include downstream RC networks and converter acquisition time.
What can replace DG407DN+T with a true drop-in footprint?
The closest documented drop-in candidates are DG407DN, DG407DN-T1, DG407DN-T1-E3, and DG407DN+ because they use the same 28-PLCC DG407 family package, while ADG407BPZ is a cross-brand candidate identified in the cross-reference results. A replacement still requires verification of address logic, enable polarity, supply range, leakage, capacitance, and switching timing. Use the Request a Quote form for the target MPN's current sourcing status.
Where can I download the DG407DN+T datasheet PDF and find its pinout?
The official DG407 product page at Analog Devices provides the manufacturer datasheet and supporting documentation for the DG407DN+T. The confirmed package is a 28-pin PLCC measuring 11.51 mm by 11.51 mm, but pin numbers and signal names must be taken from the datasheet's pin-description table and package drawing. Use those tables to assign address, enable, common, supply, and analog-channel PCB connections.

Справочные инженерные данные для DG407DN+T — сравнение, рекомендации по проектированию и информация о соответствии.

Руководство по выбору

Choose DG407DN+T when the design needs a production dual 8:1 CMOS multiplexer in a 28-PLCC package with a documented maximum on-state resistance of 100 ohms, a 200 ns switch-on time, and operation from -40 °C to +85 °C. The same-family DG407DN, DG407DN-T1, DG407DN-T1-E3, and DG407DN+ parts can be evaluated when their ordering details and complete electrical tables match the board. ADG407BPZ may suit a related dual 8:1 design, but confirm its 28-LCC pin functions, logic thresholds, enable polarity, supply limits, leakage, capacitance, and timing before substitution. For data acquisition, sample-and-hold, test equipment, communication routing, guidance and control, or audio routing, prioritize complete settling time and source impedance over the multiplexer configuration alone.

Сравнение с аналогами

Параметр Этот товар DG407DN DG407DN-T1 DG407DN-T1-E3 DG407DN+ ADG407BPZ
Brand Analog Devices Analog Devices Analog Devices Analog Devices Analog Devices Analog Devices
Package 28-PLCC (11.51 x 11.51 mm) 28-PLCC (11.51 x 11.51 mm) 28-PLCC 28-PLCC 28-PLCC (J-Lead) 28-LCC
Multiplexer Configuration Dual 8:1 Dual 8:1 Dual 8:1 Dual 8:1 Dual 8:1 Dual 8:1
Single-Ended Channels 16 channels 16 channels 16 channels 16 channels 16 channels 16 channels
Differential Channels 8 channels 8 channels 8 channels 8 channels 8 channels 8 channels
Technology CMOS CMOS CMOS CMOS CMOS CMOS

Ключевые отличия

  • Documented 100-ohm maximum on-state resistance (против ADG407BPZ)
  • Confirmed 200 ns switch-on interval (против ADG407BPZ)
  • Specified industrial temperature operation (против ADG407BPZ)

Заметки по проектированию

Treat the 200 ns switch-on time as the beginning of the settling process rather than the complete acquisition time. The selected path also includes up to 100 ohms of on-resistance, source impedance, PCB and cable capacitance, protection-network capacitance, and downstream filter delay. In measurement systems, begin a new conversion only after a timing interval that covers the switch transition and the RC settling of the selected channel. This prevents samples from adjacent channels or transient switch charge from contaminating the result.

Use the Analog Devices package drawing and pin-description table when placing the 28-PLCC device, analog commons, address inputs, enable inputs, and supply connections. Keep analog traces short where source impedance is high, maintain a continuous ground reference beneath signal paths, and route digital address and enable lines away from sensitive analog inputs. Place any required bypass capacitors near their associated supply pins with short ground returns, following the capacitance and ESR guidance stated in the manufacturer datasheet.

Do not assume that two multiplexers with the same 8:1 description are interchangeable. Before replacing DG407DN+T with DG407DN, DG407DN-T1, DG407DN-T1-E3, DG407DN+, or ADG407BPZ, compare every pin name, address-decoder truth table, enable polarity, supply range, input range, leakage, off-state capacitance, on-resistance, and switching timing. The shared 28-LCC package establishes a footprint match, but only a complete electrical comparison establishes functional drop-in equivalence.

Информация о соответствии

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Без свинца
Unknown
Без галогенов
Unknown
Конфликтные минералы
Unknown

The DG407 family is listed as a production product by Analog Devices. Specific RoHS, REACH, lead-free, halogen-free, conflict-minerals, and automotive-qualification statements were not confirmed for the exact DG407DN+T ordering code.

Данные проверены: 2026-11-16 — данные проверены и курируются командой компонентной инженерии XAIPART

Похожие запросы

DG407DN+T datasheet DG407DN+T pinout DG407DN+T datasheet pdf DG407DN+T equivalent DG407DN+T replacement DG407DN+T cross reference DG407DN+T price DG407DN+T stock Analog Devices DG407DN+T DG407DN+T 28 PLCC mux DG407DN+T data acquisition DG407DN+T vs ADG407BPZ

Связанные компоненты & термины

Analog Devices DG407DN+T DG407DN DG407DN-T1 DG407DN-T1-E3 DG407DN+ ADG407BPZ analog multiplexer analog switch IC dual 8:1 multiplexer differential multiplexer CMOS TTL-compatible logic CMOS-compatible logic 28-pin PLCC surface-mount package on-state resistance switch-on time analog signal routing data acquisition sample-and-hold test equipment communication systems guidance and control systems
Быстрый запрос цены (RFQ)
Заполните все данные — наша команда продаж ответит в течение 24 часов
Артикул Производитель Корпус QTY Целевая цена Итого
✓
Запрос цены отправлен!

Мы ответим на ваш email в течение 24 часов

1
RFQ отправлен
2
Предложение получено
3
Заказ оформлен
4
Оплата
5
Отправлено
6
Доставлено
Просмотреть детали RFQ