DSPIC30F6013AT-20I/PT - 16-bit DSC, 132KB Flash, 20 MIPS, 80-TQFP
Артикул: DSPIC30F6013AT-20I/PT ✓ Активен| Кол-во | Цена за ед. | Итого |
|---|---|---|
| 1 | $11.42 | $11,42 |
| 10 | $10.27 | $102,70 |
| 100 | $9.13 | $913,00 |
| 500 | $8.21 | $4.105,00 |
| 1.000 | $7.45 | $7.450,00 |
DSPIC30F6013AT-20I/PT Обзор
A Digital Signal Controller (DSC) is a class of programmable logic device that combines the deterministic interrupt and peripheral architecture of a microcontroller (MCU) with the computational throughput of a digital signal processor (DSP). In the broader taxonomy, DSCs sit between general-purpose microcontrollers (PIC16, PIC32) and standalone DSPs, belonging to the embedded computing / microcontroller family of semiconductors. The dsPIC30F series was Microchip's first DSC family, designed specifically for 5 V operation in noisy industrial environments.
Key features include a 16-bit modified Harvard architecture with native DSP support (single-cycle 16x16 multiply), on-chip 12-bit ADC with up to 16 channels, multiple communication peripherals (UART, SPI, I2C, CAN), 68 digital I/O pins, and a wide operating voltage range of 2.5 V to 5.5 V. The integrated DSP engine executes a 40-bit accumulator and supports fractional arithmetic, enabling real-time control loops and audio/sensor signal processing.
Architecturally, the DSPIC30F6013A uses a 16-bit data path with a 24-bit instruction word and dual-bus Harvard topology for deterministic cycle counts. The -20I suffix indicates 20 MIPS maximum throughput at the industrial -40C to +85C operating range. The 'A' revision improves ADC performance and adds DMA support compared to the original dsPIC30F6013 silicon. The 'T' suffix designates tape-and-reel packaging.
Typical applications include industrial motor control (BLDC, PMSM, ACIM drives), digital power conversion (SMPS, PFC), sensorless motor commutation, audio processing, automotive body electronics, and embedded control in noisy industrial environments where 5 V tolerance is required.
When designing with this device, ensure adequate decoupling on AVDD/AVSS pairs to achieve specified ADC SNR; the DSP engine is C-programmable via MPLAB XC-DSC compilers, easing porting from pure-DSP or pure-MCU codebases.
This page synthesizes distributor pricing, same-brand drop-in alternatives within the dsPIC30F6013A family, and practical design notes that supplement the manufacturer datasheet.
Аналоги без доработки для DSPIC30F6013AT-20I/PT — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.
Варианты в этой серии
Модели той же серии, совместимые без доработки с DSPIC30F6013AT-20I/PT (тот же форм-фактор и посадочное место) — отличается по ADC, Package, Timers, MSL Level, Core Architecture.
Инструмент быстрого сравнения — выберите альтернативные компоненты для сравнения бок о бок:
DSPIC30F6013A-20I/PT
✅ Прямая замена✓ В наличии
$9.75 / шт.
Открыть даташит →DSPIC30F6013AT-30I/PT
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
DSPIC30F6013A-30I/PT
✅ Прямая замена✓ В наличии
$10.93 / шт.
Открыть даташит →DSPIC30F6014A-30I/PT
✅ Прямая замена✓ В наличии
$11.85 / шт.
Открыть даташит →DSPIC30F6013AT-20E/PT
✅ Прямая замена✓ В наличии
$8.05 / шт.
Открыть даташит →DSPIC30F6012A-20I/PT
✅ Прямая замена✓ В наличии
$10.1 / шт.
Открыть даташит →DSPIC30F6013AT-20I/PT Максимальные параметры и электрические характеристики
| Product Type | Digital Signal Controller (DSC) |
| Core Architecture | dsPIC30F, 16-bit modified Harvard with DSP engine |
| Maximum CPU Speed | 20 MIPS |
| Program Memory (Flash) | 132 KB (44K x 24) |
| RAM Size | 6 KB |
| Operating Voltage Range | 2.5 V to 5.5 V (3.0 V to 5.5 V for full-speed operation) |
| Диапазон рабочих температур | -40C to +85C (Industrial, -I suffix) |
| Number of I/O Pins | 68 |
| ADC | 12-bit, up to 16 channels |
| Communication Peripherals | UART, SPI, I2C, CAN |
| DSP Engine | 16x16 single-cycle MAC, 40-bit accumulator |
| Корпус | 80-pin TQFP (12x12 mm, -PT suffix) |
| Тип монтажа | Surface Mount |
| Packaging Type | Tape & Reel (T suffix) |
| Уровень MSL | 3 (per JEDEC J-STD-020) |
| Статус RoHS | Compliant |
Конфигурация выводов DSPIC30F6013AT-20I/PT
| Контакт 1 | RG15 — PORTG I/O pin 15 |
| Контакт 2 | RG14 — PORTG I/O pin 14 |
| Контакт 3 | RG13 — PORTG I/O pin 13 |
| Контакт 4 | RG12 — PORTG I/O pin 12 |
| Контакт 5 | RG11 — PORTG I/O pin 11 |
| Контакт 6 | VSS — Ground reference |
| Контакт 7 | RG10 — PORTG I/O pin 10 |
| Контакт 8 | RG9 — PORTG I/O pin 9 |
| Контакт 9 | RG8 — PORTG I/O pin 8 |
| Контакт 10 | RG7 — PORTG I/O pin 7 |
| Контакт 11 | RG6 — PORTG I/O pin 6 |
| Контакт 12 | RG5 — PORTG I/O pin 5 |
| Контакт 13 | RG4 — PORTG I/O pin 4 |
| Контакт 14 | RG3 — PORTG I/O pin 3 |
| Контакт 15 | RG2 — PORTG I/O pin 2 |
| Контакт 16 | RG1 — PORTG I/O pin 1 |
| Контакт 17 | RG0 — PORTG I/O pin 0 |
| Контакт 18 | RF15 — PORTF I/O pin 15 |
| Контакт 19 | RF14 — PORTF I/O pin 14 |
| Контакт 20 | RF13 — PORTF I/O pin 13 |
| Контакт 21 | VSS — Ground reference |
| Контакт 22 | VDD — Positive supply (2.5-5.5 V) |
| Контакт 23 | RF12 — PORTF I/O pin 12 |
| Контакт 24 | RF11 — PORTF I/O pin 11 |
| Контакт 25 | RF10 — PORTF I/O pin 10 |
| Контакт 26 | RF9 — PORTF I/O pin 9 |
| Контакт 27 | RF8 — PORTF I/O pin 8 |
| Контакт 28 | RF7 — PORTF I/O pin 7 |
| Контакт 29 | RF6 — PORTF I/O pin 6 |
| Контакт 30 | RF5 — PORTF I/O pin 5 |
| Контакт 31 | RF4 — PORTF I/O pin 4 |
| Контакт 32 | AVSS — Analog ground |
| Контакт 33 | AVDD — Analog positive supply |
| Контакт 34 | RF3 — PORTF I/O pin 3 |
| Контакт 35 | RF2 — PORTF I/O pin 2 |
| Контакт 36 | RF1 — PORTF I/O pin 1 |
| Контакт 37 | RF0 — PORTF I/O pin 0 |
| Контакт 38 | AVSS — Analog ground |
| Контакт 39 | AVDD — Analog positive supply |
| Контакт 40 | RD15 — PORTD I/O pin 15 |
| Контакт 41 | RD14 — PORTD I/O pin 14 |
| Контакт 42 | RD13 — PORTD I/O pin 13 |
| Контакт 43 | RD12 — PORTD I/O pin 12 |
| Контакт 44 | RD11 — PORTD I/O pin 11 |
| Контакт 45 | RD10 — PORTD I/O pin 10 |
| Контакт 46 | RD9 — PORTD I/O pin 9 |
| Контакт 47 | RD8 — PORTD I/O pin 8 |
| Контакт 48 | VSS — Ground reference |
| Контакт 49 | VDD — Positive supply (2.5-5.5 V) |
| Контакт 50 | RD7 — PORTD I/O pin 7 |
| Контакт 51 | RD6 — PORTD I/O pin 6 |
| Контакт 52 | RD5 — PORTD I/O pin 5 |
| Контакт 53 | RD4 — PORTD I/O pin 4 |
| Контакт 54 | RD3 — PORTD I/O pin 3 |
| Контакт 55 | RD2 — PORTD I/O pin 2 |
| Контакт 56 | RD1 — PORTD I/O pin 1 |
| Контакт 57 | RD0 — PORTD I/O pin 0 |
| Контакт 58 | RC15 — PORTC I/O pin 15 |
| Контакт 59 | RC14 — PORTC I/O pin 14 |
| Контакт 60 | RC13 — PORTC I/O pin 13 |
| Контакт 61 | VSS — Ground reference |
| Контакт 62 | OSC2 — Crystal oscillator output |
| Контакт 63 | OSC1 — Crystal oscillator input |
| Контакт 64 | RC12 — PORTC I/O pin 12 |
| Контакт 65 | RC11 — PORTC I/O pin 11 |
| Контакт 66 | RC10 — PORTC I/O pin 10 |
| Контакт 67 | RC9 — PORTC I/O pin 9 |
| Контакт 68 | RC8 — PORTC I/O pin 8 |
| Контакт 69 | RC7 — PORTC I/O pin 7 |
| Контакт 70 | RC5 — PORTC I/O pin 5 |
| Контакт 71 | RC4 — PORTC I/O pin 4 |
| Контакт 72 | RC3 — PORTC I/O pin 3 |
| Контакт 73 | RC2 — PORTC I/O pin 2 |
| Контакт 74 | RC1 — PORTC I/O pin 1 |
| Контакт 75 | VDD — Positive supply (2.5-5.5 V) |
| Контакт 76 | RC0 — PORTC I/O pin 0 |
| Контакт 77 | PGD — In-circuit debug data line |
| Контакт 78 | PGC — In-circuit debug clock line |
| Контакт 79 | MCLR — Master clear reset (active-low) |
| Контакт 80 | RA15 — PORTA I/O pin 15 |
Типичное применение
DSPIC30F6013AT-20I/PT подходит для 6 применениеs: BLDC/PMSM Motor Control, Digital Switch-Mode Power Supply (SMPS), Industrial Sensor Conditioning, Audio Processing and Effects, Automotive Body Electronics, Uninterruptible Power Supply (UPS) Control.
BLDC/PMSM Motor Control
The DSPIC30F6013AT-20I/PT is well-suited for brushless DC (BLDC) and permanent-magnet synchronous motor (PMSM) field-oriented control (FOC) drives. Its 20 MIPS throughput and integrated DSP engine (single-cycle 16x16 MAC, 40-bit accumulator) execute Park/Clarke transforms and PI control loops well within 50 us cycle times, while the dedicated 12-bit ADC with up to 16 channels samples phase currents and the 5 V tolerance handles industrial back-EMF noise on the DC bus.
Рекомендуется
Digital Switch-Mode Power Supply (SMPS)
For digital power conversion such as PFC stages, full-bridge converters, and isolated DC-DC supplies, the DSPIC30F6013AT-20I/PT delivers the DSP throughput required for average-current-mode control at 100 kHz switching frequencies. The 16-bit DSP engine executes compensation loops in single cycles, while the 6 KB RAM holds state variables and the 132 KB Flash stores multi-loop firmware. Its 5 V tolerance simplifies interfacing to analog PFC controllers and gate drivers without level shifters.
Рекомендуется
Industrial Sensor Conditioning
In industrial 4-20 mA loop transmitters, weigh scales, and strain-gauge signal conditioning, the DSPIC30F6013AT-20I/PT performs digital filtering (IIR/FIR), linearization, and temperature compensation on ADC samples. The 12-bit ADC with multiple channels handles load cell, RTD, and thermocouple inputs simultaneously, while the 5 V operating range matches legacy 5 V industrial sensor architectures. The integrated DSP engine runs Kalman filters for sensor fusion without burdening the MCU core.
Рекомендуется
Audio Processing and Effects
The DSPIC30F6013AT-20I/PT can implement real-time audio effects (reverb, EQ, dynamics) and codec post-processing for prosumer audio equipment. With 20 MIPS of DSP throughput, it runs biquad filter cascades and FFT-based spectral processing at 48 kHz sample rates. The 6 KB RAM buffers audio frames, and the I2S/SP peripherals interface to common audio DACs. The 5 V analog supply tolerance simplifies integration with bipolar audio signal chains.
Рекомендуется
Automotive Body Electronics
For non-safety automotive body modules such as seat controllers, HVAC actuators, and lighting drivers, the DSPIC30F6013AT-20I/PT's 5 V tolerance withstands load-dump transients on the 12 V vehicle bus. The CAN peripheral interfaces to vehicle networks, and the DSP engine drives LED matrix dimming curves and motor positioning algorithms. Note: for AEC-Q100 qualified automotive applications, choose the dsPIC33F or dsPIC33E family instead.
Рекомендуется
Uninterruptible Power Supply (UPS) Control
In line-interactive and double-conversion UPS systems, the DSPIC30F6013AT-20I/PT orchestrates inverter control, battery management, and grid synchronization. Its DSP throughput runs PLL algorithms for grid-tie frequency locking, while 12-bit ADCs sense battery voltage/current and output waveforms. The 5 V tolerance simplifies interfacing to 12 V/24 V battery stacks via resistive dividers, and the 132 KB Flash stores multi-mode state machines for charging, inverting, and bypass operation.
Рекомендуется
Сводка рекомендуемых товаров
Справочные инженерные данные для DSPIC30F6013AT-20I/PT — сравнение, рекомендации по проектированию и информация о соответствии.
Руководство по выбору
Сравнение с аналогами
| Параметр | Этот товар | DSPIC30F6013A-20I/PT | DSPIC30F6013AT-30I/PT | DSPIC30F6013A-30I/PT | DSPIC30F6014A-30I/PT | DSPIC30F6013AT-20E/PT | DSPIC30F6012A-20I/PT |
|---|---|---|---|---|---|---|---|
| Package | 80-pin TQFP (12x12 mm) | 80-pin TQFP (12x12 mm) - same | 80-pin TQFP (12x12 mm) - same | 80-pin TQFP (12x12 mm) - same | 80-pin TQFP (12x12 mm) - same | 80-pin TQFP (12x12 mm) - same | 80-pin TQFP (12x12 mm) - same |
| Brand | Microchip Technology | Microchip Technology - same | Microchip Technology - same | Microchip Technology - same | Microchip Technology - same | Microchip Technology - same | Microchip Technology - same |
| CPU Speed (MIPS) | 20 MIPS | 20 MIPS | 30 MIPS (+50%) | 30 MIPS (+50%) | 30 MIPS (+50%) | 20 MIPS | 20 MIPS |
| Flash Program Memory | 132 KB (44K x 24) | 132 KB (same) | 132 KB (same) | 132 KB (same) | 144 KB (+9%) | 132 KB (same) | 48 KB (-64%) |
| RAM Size | 6 KB | 6 KB (same) | 6 KB (same) | 6 KB (same) | 8 KB (+33%) | 6 KB (same) | 4 KB (-33%) |
| Operating Temperature | -40C to +85C (Industrial) | -40C to +85C (same) | -40C to +85C (same) | -40C to +85C (same) | -40C to +85C (same) | -40C to +125C (Extended, wider) | -40C to +85C (same) |
| Packaging Form | Tape & Reel | Tray | Tape & Reel | Tray | Tray | Tape & Reel | Tray |
| Number of I/O Pins | 68 | 68 (same) | 68 (same) | 68 (same) | 68 (same) | 68 (same) | 68 (same) |
Ключевые отличия
- 5 V tolerance with integrated DSP engine (против DSPIC30F6012A-20I/PT)
- Industrial temperature range -40C to +85C (против DSPIC30F6013AT-20E/PT)
- 20 MIPS baseline with upward scaling options (против DSPIC30F6013A-30I/PT)
Заметки по проектированию
Estimated: at full-speed 20 MIPS operation with all peripherals enabled at 5 V VDD, the DSPIC30F6013AT-20I/PT draws approximately 70 mA (3.5 mA/MIPS typical from datasheet). Place a 10 uF bulk capacitor plus a 0.1 uF ceramic decoupling capacitor on each VDD/AVDD pin pair, located within 5 mm of the IC. Ferrite beads between digital VDD and analog AVDD isolate ADC reference noise.
The 80-pin TQFP (PT) package has a theta_JA of approximately 45 C/W typical. Estimated: at 70 mA and 5 V operation, power dissipation is 0.35 W yielding a junction temperature rise of 16 C above ambient - well within the 85 C industrial limit. For enclosed industrial enclosures with elevated ambient, add thermal copper pours under the exposed pad area to keep Tj below 100 C.
Route the crystal oscillator traces (OSC1, OSCC2) symmetrically and within 10 mm of the IC, with grounded guard traces to prevent noise coupling. The analog AVDD/AVSS pairs should have separate analog ground planes connected at a single point to the digital ground near the IC. The ICSP programming pins (PGD/PGC) should be brought out to a 2.54 mm pinheader for in-field firmware updates.
Do not exceed 5.5 V on any VDD or AVDD pin - the DSPIC30F family is not 3.3 V tolerant on I/O when operated at 5 V. The MCLR pin requires a 10 kohm pull-up to VDD for normal operation; leaving it floating prevents startup. When using the ADC, configure the AVDD pin to settle for at least 100 us after power-up before initiating conversions, otherwise readings will be inaccurate.
Информация о соответствии
RoHS compliant per Microchip product page. Standard industrial -I suffix is NOT AEC-Q100 qualified - for automotive applications, choose dsPIC33F or dsPIC33E families with explicit AEC-Q100 qualification. Halogen-free status not explicitly stated in available data - verify with manufacturer before specifying for halogen-sensitive end products.
