DSPIC33CK128MC105T-I/M7 - 16-bit DSC 128KB Flash 48-VQFN | Microchip
Артикул: DSPIC33CK128MC105T-I/M7 ✓ Активен| Кол-во | Цена за ед. | Итого |
|---|---|---|
| 1 | $5.85 | $5,85 |
| 10 | $5.27 | $52,70 |
| 100 | $4.68 | $468,00 |
| 500 | $4.1 | $2.050,00 |
| 1.000 | $3.65 | $3.650,00 |
DSPIC33CK128MC105T-I/M7 Обзор
A digital signal controller combines the deterministic arithmetic capability of a digital signal processor (DSP) with the peripheral integration and low-power modes of a microcontroller (MCU). Within the power-management hierarchy of embedded systems, the dsPIC33CK family sits at the intersection of general-purpose MCUs and dedicated motor-control DSPs, offering single-cycle MAC/DSP instructions alongside hardened control peripherals.
Key features include the single 16-bit dsPIC DSC core operating up to 100 MIPS, on-chip operational amplifiers for current-sense signal conditioning, a 12-bit high-speed ADC for simultaneous multi-channel sampling, and high-resolution PWM outputs supporting Field-Oriented Control (FOC). The M7 package suffix denotes the industrial-grade 48-VQFN 6x6 mm option, and the T suffix indicates tape-and-reel delivery for automated assembly.
Architecturally, the device pairs the enhanced flash (with ECC and live update support) to multiple dedicated DMA channels and interrupt vectors, keeping deterministic loop closure times short. The DSP engine supports single-cycle MAC and hardware division, while the flexible clock system (internal fast RC oscillator with PLL or external crystal) allows designers to trade clock frequency against power consumption. Peripherals include UART, SPI, I2C, CLC configurable logic, and multiple 16-bit timers.
Typical applications include brushless DC and PMSM motor control (sensorless FOC), digital power supplies (LLC, totem-pole PFC), battery chargers, and industrial sensing front-ends where the on-chip op-amps amplify shunt currents before the 12-bit ADC samples them.
Design consideration: decouple AVDD and VDD separately and provide the dedicated VCAP bulk capacitor per the power diagram; the internal LDO requires it for stable core regulation at 100 MIPS operation.
This page synthesizes distributor pricing, drop-in family alternatives, design notes, and application guidance not found in the manufacturer datasheet. Pricing shown is as of 2026-09-22.
Аналоги без доработки для DSPIC33CK128MC105T-I/M7 — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.
Варианты в этой серии
Модели той же серии, совместимые без доработки с DSPIC33CK128MC105T-I/M7 (тот же форм-фактор и посадочное место) — отличается по Core, ADC Resolution, Data Bus Width, Operating Temperature, Package.
Инструмент быстрого сравнения — выберите альтернативные компоненты для сравнения бок о бок:
DSPIC33CK128MC105-I/M7
✅ Прямая замена✓ В наличии
$1.98 / шт.
Открыть даташит →DSPIC33CK256MC105T-I/M7
✅ Прямая замена ⚠️ Характеристики не проверены📋 Справочный аналог (нет в каталоге)
DSPIC33CK64MC105T-I/M7
✅ Прямая замена ⚠️ Характеристики не проверены📋 Справочный аналог (нет в каталоге)
DSPIC33CK128MC105T-E/M7
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
DSPIC33CK128MC505T-I/M7
✅ Прямая замена ⚠️ Характеристики не проверены✓ В наличии
$3.98 / шт.
Открыть даташит →DSPIC33CK128MC105T-I/M7 Максимальные параметры и электрические характеристики
| Core | dsPIC33CK 16-bit DSC |
| Core Clock | up to 100 MHz (100 MIPS) |
| Flash Program Memory | 128 KB (128K x 16) |
| SRAM | 16 KB |
| Напряжение питания | 3.0 V to 3.6 V |
| Рабочая температура | -40C to +85C (I grade) |
| Корпус | 48-VQFN (6x6 mm), exposed pad |
| Тип монтажа | Surface Mount |
| ADC Resolution | 12-bit |
| On-chip Op-Amps | Yes (integrated op-amps) |
| PWM | High-resolution PWM for motor control |
| DMA | Yes (multiple DMA channels) |
| Communication Interfaces | UART, SPI, I2C |
| Packaging Suffix | T = Tape & Reel |
| Разрядность шины данных | 16-bit |
| Program Memory Type | Flash |
Конфигурация выводов DSPIC33CK128MC105T-I/M7
| Контакт 1 | MCLR — Master clear reset input / programming voltage |
| Контакт 2 | AN0/RA0 — Analog input 0 / digital I/O |
| Контакт 3 | AN1/RA1 — Analog input 1 / digital I/O |
| Контакт 4 | VSS — Ground reference |
| Контакт 5 | AN2/RA2 — Analog input 2 / digital I/O |
| Контакт 6 | AN3/RA3 — Analog input 3 / digital I/O |
| Контакт 7 | VDD — Power supply 3.0-3.6 V |
| Контакт 8 | PGD/EMUD1/RB1 — Programming data / debug / digital I/O |
| Контакт 9 | PGC/EMUC1/RB0 — Programming clock / debug / digital I/O |
| Контакт 10 | AN4/RB4 — Analog input 4 / digital I/O |
| Контакт 11 | AN5/RB5 — Analog input 5 / digital I/O |
| Контакт 12 | AN6/RB6 — Analog input 6 / digital I/O |
| Контакт 13 | AN7/RB7 — Analog input 7 / digital I/O |
| Контакт 14 | AN8/RB8 — Analog input 8 / digital I/O |
| Контакт 15 | AN9/RB9 — Analog input 9 / digital I/O |
| Контакт 16 | VSS — Ground reference |
| Контакт 17 | VDD — Power supply |
| Контакт 18 | AN10/RB10 — Analog input 10 / digital I/O |
| Контакт 19 | AN11/RB11 — Analog input 11 / digital I/O |
| Контакт 20 | PWM1H/RC0 — High-resolution PWM output 1H / digital I/O |
| Контакт 21 | PWM1L/RC1 — High-resolution PWM output 1L / digital I/O |
| Контакт 22 | PWM2H/RC2 — High-resolution PWM output 2H / digital I/O |
| Контакт 23 | PWM2L/RC3 — High-resolution PWM output 2L / digital I/O |
| Контакт 24 | PWM3H/RC4 — High-resolution PWM output 3H / digital I/O |
| Контакт 25 | PWM3L/RC5 — High-resolution PWM output 3L / digital I/O |
| Контакт 26 | VSS — Ground reference |
| Контакт 27 | OA1OUT/RC6 — Op-amp 1 output / digital I/O |
| Контакт 28 | OA1IN+/AN12/RC7 — Op-amp 1 non-inverting input / analog / digital I/O |
| Контакт 29 | OA1IN-/AN13/RC8 — Op-amp 1 inverting input / analog / digital I/O |
| Контакт 30 | OA2OUT/RC9 — Op-amp 2 output / digital I/O |
| Контакт 31 | OA2IN+/AN14/RD0 — Op-amp 2 non-inverting input / analog / digital I/O |
| Контакт 32 | OA2IN-/AN15/RD1 — Op-amp 2 inverting input / analog / digital I/O |
| Контакт 33 | OA3OUT/RD2 — Op-amp 3 output / digital I/O |
| Контакт 34 | OA3IN+/RD3 — Op-amp 3 non-inverting input / digital I/O |
| Контакт 35 | OA3IN-/RD4 — Op-amp 3 inverting input / digital I/O |
| Контакт 36 | PWM4H/RD5 — High-resolution PWM output 4H / digital I/O |
| Контакт 37 | PWM4L/RD6 — High-resolution PWM output 4L / digital I/O |
| Контакт 38 | SOSCI/RD7 — Secondary oscillator input / digital I/O |
| Контакт 39 | SOSCO/RD8 — Secondary oscillator output / digital I/O |
| Контакт 40 | VDD — Power supply |
| Контакт 41 | VCAP — Internal core LDO bulk capacitor |
| Контакт 42 | AVSS — Analog ground |
| Контакт 43 | AVDD — Analog power supply |
| Контакт 44 | OSC1/RD9 — Primary oscillator input / digital I/O |
| Контакт 45 | OSC2/RC13 — Primary oscillator output / digital I/O |
| Контакт 46 | VSS — Ground reference |
| Контакт 47 | SCL/RD10 — I2C clock / digital I/O |
| Контакт 48 | SDA/RD11 — I2C data / digital I/O |
Типичное применение
DSPIC33CK128MC105T-I/M7 подходит для 6 применениеs: BLDC/PMSM Sensorless Motor Control, Digital Power Conversion, Industrial Sensing Front-Ends, Battery Management and Chargers, Industrial Automation and Robotics, Embedded Systems / General Purpose Control.
BLDC/PMSM Sensorless Motor Control
The DSPIC33CK128MC105T-I/M7 is purpose-built for sensorless Field-Oriented Control of brushless DC and permanent-magnet synchronous motors. Its 100 MIPS core executes single-cycle MAC instructions so the FOC current loop closes within one PWM period even at high electrical speeds. The integrated op-amps amplify phase-current shunt voltages in-line, and the 12-bit ADC samples all three phases with the high-resolution PWM triggering synchronized conversions, eliminating external analog front-end components. Designers should budget ISR execution time to stay under the PWM period at maximum motor speed; the deterministic interrupt latency of the dsPIC33CK core makes this calculation reliable.
Рекомендуется
Digital Power Conversion
Digital power supplies such as LLC converters, totem-pole PFC stages, and synchronous buck regulators benefit from this DSC's high-resolution PWM and fast control loop. The 100 MIPS core supports single- or double-update control at switching frequencies used in modern AC-DC and DC-DC designs, while PWM dead-time and phase-shift control are handled in hardware with fine resolution to minimize body-diode conduction losses. The 12-bit ADC provides output-voltage and current telemetry with DMA offloading of sample buffers. Compensator coefficients can be updated on the fly, enabling adaptive mode transitions between burst, CC, and CV operation in battery chargers and adapters.
Рекомендуется
Industrial Sensing Front-Ends
The on-chip op-amps combined with the 12-bit ADC make this device a compact analog signal-chain solution for industrial sensing: pressure transducers, thermocouple conditioning via the internal references, and current monitoring all fit without external amplifier ICs. Gain and offset of the integrated op-amps are register-configurable, allowing run-time reconfiguration across sensor variants on one PCB. UART, SPI, and I2C interfaces push processed data to PLC networks or gateways, and the DMA engine sustains streaming without CPU intervention. The -40C to +85C industrial temperature grade covers factory-floor environments without component derating.
Рекомендуется
Battery Management and Chargers
Battery charging systems use this DSC for CC/CV profile control, coulomb counting, and safety supervision. The high-resolution PWM drives the power stage with low ripple, the 12-bit ADC reads cell voltages and current through the integrated op-amps, and the 128 KB flash stores charging profiles, logging, and communication stacks simultaneously. Multiple low-power modes support always-on battery supervision with minimal draw, waking on comparator or timer events. The deterministic core also implements safety-critical monitoring routines such as over-current and over-temperature cutoffs with tightly bounded response times, supporting layered protection architectures in smart chargers and power banks.
Рекомендуется
Industrial Automation and Robotics
In automation nodes, servo drives, and robotic joints, this controller merges motor control and system supervision on one chip. The 100 MIPS DSP engine closes servo current loops while the general-purpose peripherals handle encoders, limit switches via CLC configurable logic, and Modbus/UART communication to PLCs. The 16 KB RAM accommodates fieldbus buffers and trajectory calculations, and the 128 KB flash supports protocol stacks plus firmware update mechanisms. Multiple timers coordinate motion sequencing. Using one DSC for both control and communication reduces BOM count versus separate MCU-plus-driver architectures common in compact actuator designs.
Рекомендуется
Embedded Systems / General Purpose Control
For general embedded control where some DSP throughput is occasionally needed - filtering, FFT-based diagnostics, or audio-tone generation - this DSC offers MCU-style development with DSP headroom. The MPLAB X and XC16 toolchain with MCC code generation lowers barrier to entry, while the peripheral ecosystem (UART, SPI, I2C, CLC, timers) covers typical I/O needs. The 48-VQFN 6x6 mm footprint balances GPIO count against board area for cost-sensitive products. The tape-and-reel T ordering code suits high-volume contract manufacturing with automated placement, and the industrial temperature grade avoids qualifying separate consumer SKUs.
Рекомендуется
Сводка рекомендуемых товаров
Справочные инженерные данные для DSPIC33CK128MC105T-I/M7 — сравнение, рекомендации по проектированию и информация о соответствии.
Руководство по выбору
Сравнение с аналогами
| Параметр | Этот товар | DSPIC33CK128MC105-I/M7 | DSPIC33CK256MC105T-I/M7 | DSPIC33CK64MC105T-I/M7 | DSPIC33CK128MC105T-E/M7 |
|---|---|---|---|---|---|
| Package | 48-VQFN (6x6) | 48-VQFN (6x6) - same | 48-VQFN (6x6) - same | 48-VQFN (6x6) - same | 48-VQFN (6x6) - same |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Core / Performance | 16-bit dsPIC33CK, up to 100 MIPS | 16-bit, up to 100 MIPS | 16-bit, up to 100 MIPS | 16-bit, up to 100 MIPS | 16-bit, up to 100 MIPS |
| Flash Memory | 128 KB | 128 KB | 256 KB | 64 KB | 128 KB |
| SRAM | 16 KB | 16 KB | 16 KB | 16 KB | 16 KB |
| Packaging Delivery | Tape & Reel (T) | Tray/Tube | Tape & Reel | Tape & Reel | Tape & Reel |
| Integrated Op-Amps / 12-bit ADC / PWM | Yes / Yes / Yes | Yes / Yes / Yes | Yes / Yes / Yes | Yes / Yes / Yes | Yes / Yes / Yes |
Ключевые отличия
- Balanced 128 KB flash with full peripheral set (против DSPIC33CK64MC105T-I/M7)
- Cost-optimized vs the 256 KB sibling (против DSPIC33CK256MC105T-I/M7)
- Tape-and-reel delivery for automated assembly (против DSPIC33CK128MC105-I/M7)
Заметки по проектированию
The device regulates its core from the 3.3 V rail through an internal LDO whose output appears on the VCAP pin. Provide the bulk capacitor on VCAP exactly as specified in the power-delivery section of the manufacturer datasheet - wrong capacitance or excessive ESR destabilizes the core and causes erratic execution at 100 MIPS. Decouple each VDD pin with 100 nF ceramic capacitors placed within 2 mm, and isolate AVDD from the digital rail with a ferrite bead plus a dedicated 1 uF capacitor for best ADC performance.
The 48-VQFN 6x6 mm package has an exposed thermal pad that must be soldered to a grounded copper pour - it carries the majority of VSS current, not just heat. Use a 4x4 via array under the pad connected to the ground plane for lowest inductance. Keep the PWM output traces to gate drivers short and separated from the op-amp input traces carrying microvolt-level shunt signals; a ground guard ring around OA input traces reduces crosstalk from PWM edges.
Do not reconfigure the integrated op-amps and their ADC input assignments independently without checking the multiplexed pin maps - on dsPIC33CK devices the op-amp input pins share analog multiplexer channels, and an incorrect RPx pin selection silently disconnects the current-sense signal, producing zero-current readings that mimic a broken shunt. Validate analog channel mapping in MCC before PCB layout freeze. Also note the I-grade device is not rated for extended-temperature automotive use; select the E-grade sibling (DSPIC33CK128MC105T-E/M7) for hotter environments.
Информация о соответствии
Compliance data for this exact ordering code was not present in the retrieved web data. Confirm RoHS/REACH status via Microchip's Environmental Data lookup. This is a standard industrial (I-grade) part, not an AEC-Q100 automotive variant.
