DSPIC33FJ12MC201T-I/SO - 16-bit 40MIPS 12KB Flash Motor Control DSC | Microchip
Артикул: DSPIC33FJ12MC201T-I/SO ✓ Активен| Кол-во | Цена за ед. | Итого |
|---|---|---|
| 1 | $3.46 | $3,46 |
| 10 | $3.11 | $31,10 |
| 100 | $2.77 | $277,00 |
| 500 | $2.48 | $1.240,00 |
| 1.000 | $2.21 | $2.210,00 |
DSPIC33FJ12MC201T-I/SO Обзор
A Digital Signal Controller (DSC) is a hybrid architecture that combines a microcontroller (MCU) control loop with a Digital Signal Processor (DSP) computation engine. DSCs sit in the hierarchy: microcontroller -> DSC -> DSP -> embedded processor, and are particularly well-suited to closed-loop control tasks where both deterministic real-time response and high-rate numerical computation are required simultaneously, such as field-oriented control (FOC) of three-phase motors.
Key features include 16-bit data path, 40 MIPS execution, 21 I/O pins, an integrated 6-channel PWM module with dedicated motor-control peripherals, 12-bit ADC, and operation from 3.0 V to 3.6 V. The dsPIC33FJ12MC201 is specifically architected with motor-control centric peripherals including a Motor Control PWM (MCPWM) module, quadrature encoder interface (QEI), and high-speed analog comparators, eliminating external logic in typical BLDC and PMSM drive designs.
Typical applications include sensorless and sensored BLDC motor drives, PMSM servo control, ceiling fans and pumps, e-bike controllers, small appliances, and DC-DC converter digital control loops. The 20-SOIC footprint simplifies hand prototyping and rework while still supporting the motor-control PWM duty cycles needed for switching frequencies above 20 kHz.
Designers should provide adequate decoupling (100 nF + 10 uF bulk) close to VDD/AVDD pins and follow Microchip's dsPIC33F motor-control reference design layouts to minimize PWM glitch injection into the ADC sampling window. The 'T' suffix indicates Tape and Reel packaging, while the 'I' suffix indicates the -40C to +85C industrial temperature grade.
Аналоги без доработки для DSPIC33FJ12MC201T-I/SO — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.
Варианты в этой серии
Модели той же серии, совместимые без доработки с DSPIC33FJ12MC201T-I/SO (тот же форм-фактор и посадочное место) — отличается по ADC, Core Architecture, Operating Temperature, Package, Timers.
Инструмент быстрого сравнения — выберите альтернативные компоненты для сравнения бок о бок:
DSPIC33FJ12MC201-I/SO
✅ Прямая замена✓ В наличии
$2.65 / шт.
Открыть даташит →DSPIC33FJ12MC201-I/SS
✅ Прямая замена✓ В наличии
$2.46 / шт.
Открыть даташит →DSPIC33FJ12MC201-E/SO
✅ Прямая замена✓ В наличии
$2.95 / шт.
Открыть даташит →DSPIC33FJ12MC201-E/SS
✅ Прямая замена✓ В наличии
$3.42 / шт.
Открыть даташит →DSPIC33FJ12GP202-I/SP
✅ Прямая замена✓ В наличии
$2.69 / шт.
Открыть даташит →DSPIC33FJ12MC201T-I/SO Максимальные параметры и электрические характеристики
| Core Architecture | dsPIC33F 16-bit DSC |
| CPU Type | 16-bit MCU + DSP engine |
| Program Memory | 12 KB Flash (12K x 8) |
| RAM | 1 KB |
| Maximum CPU Speed | 40 MIPS (40 MHz) |
| Напряжение питания | 3.0 V to 3.6 V |
| I/O Pins | 21 |
| Package Type | 20-pin SOIC (0.295 inch / 7.50 mm width) |
| Рабочая температура | -40 C to +85 C (Industrial, 'I' suffix) |
| ADC | 12-bit (per family) |
| Motor Control PWM | 6-channel MCPWM (per family) |
| ROM Type | Flash |
| Тип монтажа | Surface Mount |
| Packaging | Tape & Reel ('T' suffix) |
| Статус жизненного цикла | ACTIVE |
Конфигурация выводов DSPIC33FJ12MC201T-I/SO
| Контакт 1 | MCLR — Master Clear (reset) input, active low |
| Контакт 2 | PWM1L — PWM1 low-side output (Motor Control PWM) |
| Контакт 3 | PWM1H — PWM1 high-side output (Motor Control PWM) |
| Контакт 4 | PWM2L — PWM2 low-side output (Motor Control PWM) |
| Контакт 5 | PWM2H — PWM2 high-side output (Motor Control PWM) |
| Контакт 6 | PWM3L — PWM3 low-side output (Motor Control PWM) |
| Контакт 7 | PWM3H — PWM3 high-side output (Motor Control PWM) |
| Контакт 8 | AN0/RA0 — Analog input 0 / GPIO |
| Контакт 9 | AN1/RA1 — Analog input 1 / GPIO |
| Контакт 10 | AN2/RA2 — Analog input 2 / GPIO |
| Контакт 11 | AVDD — Analog supply voltage (3.3 V) |
| Контакт 12 | AVSS — Analog ground |
| Контакт 13 | OSC1/RC0 — Crystal oscillator input / GPIO |
| Контакт 14 | OSC2/RC1 — Crystal oscillator output / GPIO |
| Контакт 15 | PGECx/RCx — ICSP programming clock (per datasheet pinout) |
| Контакт 16 | PGEDx/RCx — ICSP programming data (per datasheet pinout) |
| Контакт 17 | RBx — Port B GPIO / QEI input (per datasheet pinout) |
| Контакт 18 | RBx — Port B GPIO (per datasheet pinout) |
| Контакт 19 | VSS — Digital ground |
| Контакт 20 | VDD — Digital supply voltage (3.3 V) |
Типичное применение
DSPIC33FJ12MC201T-I/SO подходит для 6 применениеs: BLDC / PMSM Motor Control (FOC), Sensorless BLDC Fan / Pump Drives, E-Bike and Small EV Controllers, Digital DC-DC Converter Control, Small Appliance Motor Control (Washing Machine / Dishwasher), Robotics and Hobby Drones (Sub-250g Class).
BLDC / PMSM Motor Control (FOC)
The DSPIC33FJ12MC201T-I/SO is engineered for field-oriented control (FOC) of brushless DC and permanent magnet synchronous motors, where its 40 MIPS core executes the Park/Clarke transforms and PI loops at PWM rates above 20 kHz. The integrated 6-channel Motor Control PWM (MCPWM) module generates complementary pairs with programmable dead time, and the 12-bit ADC samples phase currents within the PWM window. Its 21 I/O pins support Hall sensors or a quadrature encoder interface (QEI) for rotor position feedback. The 12 KB Flash holds FOC lookup tables and state machines for sensorless startup, while 1 KB RAM buffers ADC samples. The 20-SOIC footprint suits hand-prototyped motor-drive boards under 1 kW where compact layout matters more than exotic thermal performance. Recommended companion parts: IRFS7537 (MOSFET), ACS712 (current sensor).
Рекомендуется
Sensorless BLDC Fan / Pump Drives
For sensorless BLDC ceiling fans, water pumps, and HVAC blowers, the DSPIC33FJ12MC201T-I/SO provides back-EMF zero-crossing detection and trapezoidal commutation using its high-speed analog comparators and 6-channel PWM. The 40 MIPS throughput processes BEMF sensing, RPM estimation, and closed-loop speed PI control in real time. The 3.3 V supply rails simplify integration with low-voltage gate drivers, and the 20-SOIC package fits small motor-control PCBs. Industrial temperature grade (-40 C to +85 C) supports outdoor or under-hood installations. Power dissipation is minimal due to the CMOS core design; no heatsink required. Recommended companion parts: FDD4685 (P-channel high-side), MCP1416 (gate driver).
Рекомендуется
E-Bike and Small EV Controllers
The DSPIC33FJ12MC201T-I/SO suits e-bike hub-motor controllers and small EV traction drives where its dedicated motor-control PWM with programmable dead-band prevents shoot-through in 3-phase inverter bridges. The 16-bit DSC core handles torque estimation, throttle mapping, and battery current limiting with deterministic interrupt latency. With 21 I/O, designers can interface to throttle, brake, PAS (pedal-assist) sensors, and a serial LCD. The 20-SOIC industrial-temp package is suited to vibration-prone and outdoor environments. Recommended companion parts: PIC18F2423 (display/IO co-processor), MCP1700 (3.3V LDO).
Рекомендуется
Digital DC-DC Converter Control
Digital control loops for buck, boost, and SEPIC converters benefit from the DSPIC33FJ12MC201T-I/SO's DSP engine for PID compensation, feed-forward compensation, and adaptive voltage positioning. The high-resolution PWM (with 16-bit duty resolution in MCPWM mode) provides fine output voltage regulation. The 12-bit ADC samples output voltage and current at up to 1 Msps, enabling multi-loop digital control. With 12 KB Flash and 1 KB RAM, the firmware can include constant-on-time, voltage-mode, and current-mode algorithms. Recommended companion parts: MCP14700 (synchronous gate driver), MCP6L01 (op-amp for current sense).
Рекомендуется
Small Appliance Motor Control (Washing Machine / Dishwasher)
Washing machine drum motors, dishwasher pumps, and refrigerator compressors use the DSPIC33FJ12MC201T-I/SO for variable-speed direct-drive control. The motor-control PWM supports 6-step and sinusoidal commutation, while the DSP engine runs speed/load profiling algorithms to optimize wash cycles. Industrial temperature grade handles appliance under-cabinet heat. The 20-SOIC package is economical for high-volume consumer white-goods manufacturing. Recommended companion parts: dsPIC33FJ12GP202 (auxiliary DSP co-processor), MCP9700 (temperature sensor).
Рекомендуется
Robotics and Hobby Drones (Sub-250g Class)
Sub-250 g hobby drones and educational robotics platforms use the DSPIC33FJ12MC201T-I/SO for 4-in-1 ESC (electronic speed controller) integration, where four discrete MCUs each drive one brushless motor. The 40 MIPS throughput handles PID control loops at 8 kHz update rates, and the motor-control PWM provides hardware dead-band generation. The small 20-SOIC footprint enables compact quadcopter ESC boards. Industrial temperature grade supports high-altitude cold operation. Recommended companion parts: MPU-6050 (IMU), NCP702 (3.3V LDO).
Рекомендуется
Сводка рекомендуемых товаров
Справочные инженерные данные для DSPIC33FJ12MC201T-I/SO — сравнение, рекомендации по проектированию и информация о соответствии.
Руководство по выбору
Сравнение с аналогами
| Параметр | Этот товар | DSPIC33FJ12MC201-I/SO | DSPIC33FJ12MC201-I/SS | DSPIC33FJ12MC201-E/SO | DSPIC33FJ12MC201-E/SS | DSPIC33FJ12GP202-I/SP |
|---|---|---|---|---|---|---|
| Package | 20-SOIC (SO) | 20-SOIC (SO) - same | 20-SOIC (SO family) | 20-SOIC (SO) - same | 20-SOIC (SO family) | 20-SOIC (SO family) |
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Core Architecture | dsPIC33F 16-bit DSC | dsPIC33F 16-bit DSC | dsPIC33F 16-bit DSC | dsPIC33F 16-bit DSC | dsPIC33F 16-bit DSC | dsPIC33F 16-bit DSC |
| Program Memory | 12 KB Flash | 12 KB Flash | 12 KB Flash | 12 KB Flash | 12 KB Flash | 12 KB Flash (GP family) |
| RAM | 1 KB | 1 KB | 1 KB | 1 KB | 1 KB | 1 KB |
| CPU Speed | 40 MIPS | 40 MIPS | 40 MIPS | 40 MIPS | 40 MIPS | 40 MIPS (GP) |
| Motor Control PWM | 6-channel MCPWM | 6-channel MCPWM | 6-channel MCPWM | 6-channel MCPWM | 6-channel MCPWM | No MCPWM (GP family) |
| Supply Voltage | 3.0 V to 3.6 V | 3.0 V to 3.6 V | 3.0 V to 3.6 V | 3.0 V to 3.6 V | 3.0 V to 3.6 V | 3.0 V to 3.6 V |
| Temperature Range | -40 C to +85 C (Industrial) | -40 C to +85 C | -40 C to +85 C | -40 C to +125 C (Extended) | -40 C to +125 C (Extended) | -40 C to +85 C |
| Packaging Format | Tape & Reel | Tube | Tube (SSOP) | Tube | Tube (SSOP) | Tube (SPDIP) |
Ключевые отличия
- Dedicated Motor-Control PWM (MCPWM) with hardware dead-band generation (против DSPIC33FJ12GP202-I/SP)
- Tape and Reel format for high-volume SMT assembly (против DSPIC33FJ12MC201-I/SO)
- Same 20-SOIC footprint across the entire MC201 family (против DSPIC33FJ12MC202 family)
Заметки по проектированию
Place a 100 nF ceramic decoupling capacitor as close as possible to each VDD/AVDD pin (pins 11 and 20) and a 10 uF bulk capacitor on the supply rail. For motor-control applications where switching noise couples to analog inputs, add a ferrite bead between digital VDD and analog AVDD to isolate the ADC reference from switching transients.
Route the motor-phase PWM outputs (PWM1H/L through PWM3H/L on pins 2-7) in a tight group away from analog input traces to minimize capacitive coupling. Place the crystal oscillator traces (OSC1/OSC2 on pins 13-14) within 5 mm of the IC with a ground guard ring to suppress radiated noise. Refer to Microchip's dsPIC33F motor-control reference design (AN1078) for layout guidance.
Do not exceed the absolute maximum supply voltage of 4.0 V on VDD - the 3.3 V nominal supply must stay below 3.6 V under all transients. Ensure MCLR (pin 1) has a proper 10 kohm pull-up to VDD; floating MCLR causes erratic behavior. Use Microchip's ICSP programming connector with proper isolation per DS-70265 to avoid in-circuit programming failures.
Estimated: At maximum operating frequency (40 MHz) with all peripherals active, the DSPIC33FJ12MC201T-I/SO draws approximately 25 mA from VDD, yielding about 82 mW dissipation. The 20-SOIC package has theta_JA of approximately 80 C/W on a 1-oz copper pour, so the junction-to-ambient rise is about 6.6 C above ambient - well within the 85 C industrial limit and 125 C extended limit. No heatsink is required for typical motor-control designs.
Информация о соответствии
RoHS compliant per Microchip product declaration. Industrial temperature grade is not AEC-Q100 qualified; for automotive motor-control, use dsPIC33F automotive-qualified variants such as dsPIC33FJ128MC804 family. Conflict minerals statement available from Microchip.
