Silicon Labs

EFM32G200F32G-E-QFN32 - 32MHz Cortex-M3 MCU | Silicon Labs

Артикул: EFM32G200F32G-E-QFN32 ✓ Активен
1.98 V to 3.8 V Vdss 0.6 uA Id 32-QFN, 6 x 6 mm Package 32 MHz Speed 32 KB Flash Memory
MOQ: 1 |

EFM32G200F32G-E-QFN32 Обзор

Silicon Labs EFM32G200F32G-E-QFN32 is a 32 MHz ARM Cortex-M3 Gecko microcontroller with 32 KB of Flash memory, 8 KB of RAM, and 24 digital I/O pins, packaged in a 32-pin QFN 6 x 6 mm device. It operates from a 1.98 V to 3.8 V supply and combines a low-power architecture with fast wake-up behavior for energy-sensitive embedded systems.

A microcontroller is a programmable system-on-chip that integrates a processor core, memory, digital interfaces, timers, and analog or communication peripherals on one semiconductor device. The EFM32G200 family belongs to the ARM Cortex-M3 microcontroller, embedded processor, and semiconductor hierarchy. Silicon Labs positions the Gecko family for applications that need efficient processing, autonomous peripheral operation, and low standby consumption without sacrificing real-time control capability.

Three principal features distinguish the EFM32G200F32G-E-QFN32: a 32 MHz ARM Cortex-M3 core, 32 KB of program Flash, and 8 KB of RAM. The device also provides 24 digital I/O pins and two 16-bit timers. Low-power operation reaches 0.6 uA in Stop mode, while run-mode consumption is specified at 180 uA/MHz. These characteristics make the MCU suitable for portable sensing, industrial control, connected equipment, and embedded automation.

The Gecko architecture uses hardware features intended to reduce CPU workload, including a Wake-up Interrupt Controller and autonomous peripheral operation. Fast wake-up behavior helps systems react to external events without continuously running the processor. The MCU supports programming through its Cortex-M3 ecosystem and is identified by the manufacturer's product family and device ordering information.

Typical uses include battery-powered environmental sensors, building-control endpoints, compact industrial controllers, robotics modules, and IoT devices connected to external radios or sensors. The 32 KB Flash capacity is suitable for focused firmware rather than large graphical applications, while 8 KB of RAM supports modest protocol buffers and real-time control state.

PCB design should preserve the manufacturer's recommended power, decoupling, ground, and exposed-pad layout. Place the QFN exposed pad on a properly sized ground copper region, keep high-current return paths away from sensitive analog inputs, and follow the pin-description table in the manufacturer datasheet when assigning all 32 package pins.

This product page combines core specifications, package and memory comparisons, verified drop-in alternatives, and practical implementation guidance. It helps engineers distinguish ordering-code differences, plan firmware and peripheral requirements, and assess whether the EFM32G200F32G-E-QFN32 fits a low-power embedded design.

Аналоги без доработки для EFM32G200F32G-E-QFN32 — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.

Варианты в этой серии

Модели той же серии, совместимые без доработки с EFM32G200F32G-E-QFN32 (тот же форм-фактор и посадочное место) — отличается по Package, Run Mode Current, Digital I/O Pins, Timers, RAM.

Silicon Labs
Package: 32-QFN, 6 x 6 mm, exposed pad
Digital I/O Pins: 24
Сравнить с EFM32G200F32G-E-QFN32 →
Silicon Labs
Package: 32-QFN (6 x 6 mm)
Run Mode Current: 180 µA/MHz
Timers: 2 x 16-bit timers
Сравнить с EFM32G200F32G-E-QFN32 →
Silicon Labs
Package: 32-QFN (6x6 mm) with exposed pad
Сравнить с EFM32G200F32G-E-QFN32 →
Silicon Labs
Package: 32-QFN (6 x 6 mm)
RAM: 16 kB
Сравнить с EFM32G200F32G-E-QFN32 →
Silicon Labs
Run Mode Current: 180 uA/MHz (per EFM32G family datasheet)
Digital I/O Pins: 24
RAM: 16 KB
Сравнить с EFM32G200F32G-E-QFN32 →

EFM32G200F32-QFN32

✅ Прямая замена
Silicon Labs
📦 32-QFN (6x6 mm)
ARM Cortex-M3 · 32-Bit · 32 MHz · 32 kB (32K x 8) · 8 kB · 1.98 V to 3.8 V · 24 · 2 x 16-bit

Уточнить цену

Открыть даташит →

EFM32G200F32G-E-QFN32R

✅ Прямая замена
📦 32-QFN (6x6 mm)
Same 32 MHz Cortex-M3 core, 32 KB Flash, 8 KB RAM, and 32-QFN electrical configuration; R denotes a reel-related ordering suffix.

📋 Справочный аналог (нет в каталоге)

EFM32G200F16-QFN32

✅ Прямая замена
Silicon Labs
📦 32-QFN (6x6 mm)
ARM Cortex-M3 · 32-bit · 32 MHz · 16 kB · 8 kB · 24 · 2 x 16-bit · 1.98 V to 3.8 V

Уточнить цену

Открыть даташит →

EFM32G200F32G-E-QFN32 Максимальные параметры и электрические характеристики

Core Processor ARM Cortex-M3, 32-bit single core
Maximum CPU Frequency 32 MHz
Program Memory 32 KB Flash
RAM 8 KB
Digital I/O Pins 24 pins
Timers 2 x 16-bit
Supply Voltage Range 1.98 V to 3.8 V
Stop Mode Current 0.6 uA
Run Mode Current 180 uA/MHz
Wake-up Interrupt Controller Integrated
Memory Protection Unit Integrated
Корпус 32-QFN, 6 x 6 mm
Exposed Pad Present
Тип монтажа Surface mount

Руководство по цоколевке EFM32G200F32G-E-QFN32 в корпусе 32-qfn, 6 x 6 mm

Цоколевка для EFM32G200F32G-E-QFN32 (корпус 32-qfn, 6 x 6 mm). Эта цифровая ИС включает выводы GPIO, интерфейсы связи (UART, SPI, I2C) и выводы питания. Обратитесь к техническому описанию производителя для альтернативных функций выводов и вариантов конфигурации. Необходимо для проектирования встраиваемых систем и трассировки печатных плат.

Схема цоколевки корпуса 32-qfn, 6 x 6 mm для EFM32G200F32G-E-QFN32

Нет подробных данных о распиновке для EFM32G200F32G-E-QFN32.

Обратитесь к даташиту для полной конфигурации выводов.

Типичное применение

EFM32G200F32G-E-QFN32 подходит для 6 применениеs: Battery-Powered Environmental Sensor, Industrial Control Endpoint, IoT Sensor Node, Building Automation Sensor, Compact Robotics Controller, Portable Measurement Device.

🧩

Battery-Powered Environmental Sensor

The EFM32G200F32G-E-QFN32 is well suited to a battery-powered environmental sensor because its 32 MHz Cortex-M3 core can process measurements while the low-power architecture supports 0.6 uA Stop-mode operation. The 32 KB of Flash accommodates drivers, sampling control, filtering, and a compact communications protocol without external program memory. Two 16-bit timers can pace sensor sampling and sensor-control intervals, while 24 digital I/O pins allow connections to a digital sensor, status indicators, and a radio enable line. Keep the radio and sensor disabled during inactive periods to convert the low Stop-mode figure into meaningful battery life.

🏭

Industrial Control Endpoint

Use the EFM32G200F32G-E-QFN32 as a compact industrial control endpoint for digital I/O, counting, monitoring, and local logic. Its two 16-bit timers are useful for pulse counting, periodic maintenance tasks, and timing external actuators, while the 24 available digital I/O pins reduce the need for external logic. The 32 MHz ARM Cortex-M3 core provides deterministic responsiveness, and 32 KB of Flash leaves room for communications, diagnostics, and control code. Its 1.98 V to 3.8 V operating range supports low-voltage industrial designs, subject to the final I/O voltage and environmental requirements.

🌐

IoT Sensor Node

The EFM32G200F32G-E-QFN32 provides a practical foundation for an IoT sensor node requiring local processing and modest protocol support. Its Cortex-M3 core runs up to 32 MHz, while 32 KB of Flash accommodates networking code, drivers, and application logic and 8 KB of RAM supports compact receive and transmit buffers. The 24 digital I/O pins can connect sensors, interrupts, and radio-control signals. Fast wake-up behavior and Stop-mode current of 0.6 uA help reduce energy use during idle intervals. Select a radio carefully because radio current and duty cycle usually dominate total battery consumption.

🏠

Building Automation Sensor

The EFM32G200F32G-E-QFN32 can manage a low-cost building-automation sensor that detects occupancy, temperature, or contact events. Two 16-bit timers support periodic sensing and debounce timing, while the 24 digital I/O pins accept multiple switches, alarm outputs, and bus signals. The 32 KB Flash capacity is useful for protocol stacks, threshold logic, calibration data, and diagnostic routines. Its low-power stop behavior allows the node to sleep between events, and fast wake-up reduces response latency. For wired building systems, verify that all connected interface levels remain compatible with the microcontroller's specified operating conditions.

🤖

Compact Robotics Controller

The EFM32G200F32G-E-QFN32 is appropriate for a small robotics controller that handles sensors, simple actuators, and local coordination. The 32 MHz ARM Cortex-M3 core handles real-time control tasks, while the two 16-bit timers can generate precise pulse widths, sample control signals, or drive timing sequences. With 24 digital I/O pins, the controller can interface encoders, switches, motor-control commands, and status LEDs. The 32 KB Flash capacity supports compact motion logic and communication routines, but it is not intended for large robotics frameworks. Validate motor transients and grounding separately from the low-voltage digital controller.

📱

Portable Measurement Device

The EFM32G200F32G-E-QFN32 supports a portable measurement instrument where low standby power and compact size are important. Its 32 KB Flash can store firmware for acquisition control, calibration, display updates, and a serial protocol, while 8 KB of RAM handles sampled data and control state. The two 16-bit timers are useful for periodic acquisition and interface timing. Operating from 1.98 V to 3.8 V simplifies low-voltage design planning, although the selected sensor and display may require regulated rails. Use the exposed-pad land pattern correctly and validate analog measurement accuracy separately from the digital controller.

What is the EFM32G200F32G-E-QFN32?
The EFM32G200F32G-E-QFN32 is a 32 MHz ARM Cortex-M3 Gecko microcontroller from Silicon Labs with 32 KB of Flash, 8 KB of RAM, and 24 digital I/O pins. According to the Silicon Labs product specification, it uses a 1.98 V to 3.8 V supply and is packaged in a 32-QFN measuring 6 x 6 mm. The device is intended for low-power embedded control, sensing, and connected-device applications.
What are the key specifications of EFM32G200F32G-E-QFN32 that engineers should know?
The principal specifications are a 32 MHz ARM Cortex-M3 core, 32 KB of Flash, 8 KB of RAM, 24 digital I/O pins, and two 16-bit timers. The Silicon Labs device specification also identifies a 1.98 V to 3.8 V operating supply, 0.6 uA Stop-mode current, and 180 uA/MHz run-mode current. These figures determine firmware capacity, real-time performance, peripheral allocation, and battery-life expectations.
Where can I download the EFM32G200F32G-E-QFN32 datasheet PDF?
Download the manufacturer documentation from the Silicon Labs EFM32G product page or the EFM32G datasheet link on this page. The EFM32G datasheet contains the device pin descriptions, electrical characteristics, memory map, peripheral details, and package drawings. Use the manufacturer PDF as the controlling document for layout and programming rather than relying on an aggregator's transcribed specifications.
Where can I find the EFM32G200F32G-E-QFN32 pinout?
The complete 32-pin assignment is shown in the pin-description table of the EFM32G datasheet. Use that table when connecting power, ground, reset, programming signals, oscillators, and peripheral I/O. The device is a 32-QFN package with an exposed pad, so the pad and thermal-via implementation must also follow the manufacturer's package-layout guidance.
Is EFM32G200F32G-E-QFN32 suitable for battery-powered applications?
Yes, the EFM32G200F32G-E-QFN32 is suitable for battery-powered embedded systems because Silicon Labs specifies 0.6 uA in Stop mode and 180 uA/MHz in Run mode. Its fast wake-up behavior and autonomous peripherals can reduce the time for which the CPU remains active. Actual battery life still depends on sensor duty cycle, radio activity, supply efficiency, and the selected energy-saving mode.
What is the difference between EFM32G200F32G-E-QFN32 and EFM32G200F32-QFN32?
Both devices provide the same fundamental Gecko configuration: an ARM Cortex-M3 core, 32 MHz operation, 32 KB of Flash, 8 KB of RAM, and a 32-QFN package. The EFM32G200F32G-E-QFN32 ordering code identifies the specific package and revision configuration used in this listing. Confirm every ordering code, temperature grade, and lifecycle status against the manufacturer ordering information before substitution.
EFM32G200F32G-E-QFN32 vs EFM32G200F16-QFN32: which is better?
Choose EFM32G200F32G-E-QFN32 when firmware storage is the deciding constraint because it provides 32 KB of Flash, twice the 16 KB listed for EFM32G200F16-QFN32. Both retain an ARM Cortex-M3 core operating up to 32 MHz, 8 KB of RAM, 24 digital I/O pins, and a 32-QFN package. The F32 part is therefore preferable for larger code, more elaborate drivers, or protocol stacks.
When should I choose EFM32G200F32G-E-QFN32 over a smaller-memory MCU?
Choose the EFM32G200F32G-E-QFN32 when 32 KB of Flash provides useful headroom for protocol handlers, control logic, and field updates. A 16 KB Flash device may force application code into a more compact architecture, while the selected Gecko configuration also offers two 16-bit timers and autonomous low-power operation. Select the smaller-memory alternative only when the complete firmware comfortably fits and minimizing program-memory capacity is the priority.
Is EFM32G200F32G-E-QFN32 suitable for an IoT sensor node?
Yes, the EFM32G200F32G-E-QFN32 fits an IoT sensor node that needs local control, timers, and moderate protocol code. Its 32 MHz Cortex-M3 core and 32 KB of Flash support event handling, while 8 KB of RAM is sufficient for compact buffers and state. Its 0.6 uA Stop-mode specification is especially useful when the radio and sensor can remain disabled between measurements.
What can replace EFM32G200F32G-E-QFN32?
The closest same-family drop-in candidates are EFM32G200F32-QFN32, EFM32G200F32G-E-QFN32R, and EFM32G200F16-QFN32, all using the 32-QFN Gecko format. Their practical equivalence depends on the ordering code, flash requirement, and production status. No independently verified cross-brand pin-compatible replacement was identified, so firmware and peripheral changes may be required for unrelated MCU families.
What is the best Silicon Labs equivalent for EFM32G200F32G-E-QFN32?
The best direct Silicon Labs equivalent depends on whether identical memory is required. EFM32G200F32-QFN32 retains the 32 KB Flash and 8 KB RAM configuration in the same 32-QFN format, while EFM32G200F16-QFN32 reduces Flash to 16 KB. Treat the F32-QFN32 device as the closest functional alternative when its ordering and lifecycle details match the production design.
Where can I buy EFM32G200F32G-E-QFN32 online?
Use the Request a Quote form on this page to request EFM32G200F32G-E-QFN32 availability, current lead time, and an order quote. Provide the required package, quantity, and production schedule so the request can be matched accurately. The exact target ordering code is essential because related Gecko devices use different Flash capacities, revision codes, and reel suffix conventions.
What is the price of EFM32G200F32G-E-QFN32?
Current commercial pricing for EFM32G200F32G-E-QFN32 is obtained through the Request a Quote form on this page. Submit the quantity, target packaging, and required delivery date for a current quotation. Pricing can change with market conditions and order volume, so use the form rather than relying on a historical listing figure when preparing a production BOM.
What is the lead time for EFM32G200F32G-E-QFN32?
Request the current lead time for EFM32G200F32G-E-QFN32 through the Request a Quote form on this page. State your required quantity, delivery date, and whether a cut tape or reel configuration is needed. For production planning, also confirm the manufacturer lifecycle status because supply timing and obsolete-part handling differ from active catalog devices.
How much RAM and Flash does the EFM32G200F32G-E-QFN32 have?
The EFM32G200F32G-E-QFN32 provides 32 KB of Flash for program code and 8 KB of RAM for working data. According to the Silicon Labs product specification, these resources accompany a 32 MHz ARM Cortex-M3 core and 24 digital I/O pins. The memory combination is appropriate for compact real-time control, communication protocols, and sensor-node firmware rather than resource-intensive graphical workloads.

Справочные инженерные данные для EFM32G200F32G-E-QFN32 — сравнение, рекомендации по проектированию и информация о соответствии.

Руководство по выбору

Choose EFM32G200F32G-E-QFN32 when a new low-power design needs an ARM Cortex-M3 core, 32 KB of Flash, 8 KB of RAM, two 16-bit timers, and 24 digital I/O pins in a compact 32-QFN package. Choose EFM32G200F32-QFN32 when its ordering code and lifecycle status match the production requirements and it offers a cleaner or preferred catalog designation. Consider EFM32G200F16-QFN32 only when the entire firmware, including libraries, boot code, and update margin, fits within 16 KB; its reduced Flash can otherwise create costly firmware rework. EFM32G200F32G-E-QFN32R is suitable when its reel-related ordering configuration matches assembly requirements. No cross-brand drop-in replacement was independently verified, so changing MCU families should be treated as a redesign rather than a footprint-only substitution.

Сравнение с аналогами

Параметр Этот товар EFM32G200F32-QFN32 EFM32G200F32G-E-QFN32R EFM32G200F16-QFN32
Brand Silicon Labs Silicon Labs Silicon Labs Silicon Labs
Package 32-QFN (6x6 mm) 32-QFN (6x6 mm) 32-QFN (6x6 mm) 32-QFN (6x6 mm)
Core Processor ARM Cortex-M3, 32-bit ARM Cortex-M3, 32-bit ARM Cortex-M3, 32-bit ARM Cortex-M3, 32-bit
Maximum Frequency 32 MHz 32 MHz 32 MHz 32 MHz
Flash Memory 32 KB 32 KB 32 KB 16 KB
RAM 8 KB 8 KB 8 KB 8 KB
Digital I/O Pins 24 pins 24 pins 24 pins 24 pins
Timers 2 x 16-bit 2 x 16-bit 2 x 16-bit 2 x 16-bit

Ключевые отличия

  • Twice the Flash memory of the reduced-memory family member (против EFM32G200F16-QFN32)
  • Identical core, memory, and package configuration (против EFM32G200F32-QFN32)
  • Direct reel-configured ordering option (против EFM32G200F32G-E-QFN32R)

Заметки по проектированию

Implement the 32-QFN footprint according to the manufacturer package drawing, including the exposed ground pad, solderable perimeter pads, and thermal-via arrangement. Place input and bulk-decoupling capacitors close to their associated supply pins and connect the exposed pad to a continuous ground plane. Verify pad dimensions, paste volume, and reflow profile against the current EFM32G datasheet rather than copying a generic QFN footprint.

Plan the 1.98 V to 3.8 V supply rail so that voltage droop, startup sequencing, and peripheral load current remain inside the device limits. Place local high-frequency bypass capacitance near each supply connection and use additional bulk capacitance where the source is distant. For battery-powered designs, measure both active and sleep current because the 0.6 uA Stop specification excludes current drawn by external sensors, regulators, and radios.

Assign all 32 package pins from the datasheet pin-description table and keep exposed-pad vias away from sensitive signal paths where practical. Route high-current or switching signals away from oscillator, reset, and low-level sensor inputs. Provide a clean ground reference beneath the device and use short return paths for signal and bypass-capacitor connections. This reduces susceptibility to switching noise and improves repeatability in low-power sensing systems.

Do not treat the EFM32G200F16-QFN32 as a fully equivalent substitution when firmware exceeds 16 KB: its Flash capacity is 50% lower than the 32 KB available in the target. Likewise, a suffix change can affect reel configuration, revision identity, or ordering requirements even when the electrical specifications appear identical. Confirm the complete ordering code, lifecycle status, and firmware size before approving a replacement.

Информация о соответствии

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Без свинца
Unknown
Без галогенов
Unknown
Конфликтные минералы
Unknown

The manufacturer product page and EFM32G family materials should be checked for current declarations. No specific compliance conclusion was added without an explicit product-level declaration.

Данные проверены: 2026-11-19 — данные проверены и курируются командой компонентной инженерии XAIPART

Похожие запросы

EFM32G200F32G-E-QFN32 EFM32G200F32G-E-QFN32 datasheet EFM32G200F32G-E-QFN32 datasheet pdf EFM32G200F32G-E-QFN32 pinout EFM32G200F32G-E-QFN32 equivalent EFM32G200F32G-E-QFN32 replacement EFM32G200F32G-E-QFN32 price EFM32G200F32G-E-QFN32 stock Silicon Labs EFM32G200F32G-E-QFN32 EFM32G200F32G-E-QFN32 vs EFM32G200F16-QFN32 EFM32G200F32G-E-QFN32 QFN32 footprint EFM32G200F32G-E-QFN32 application circuit

Связанные компоненты & термины

Silicon Labs EFM32G200F32G-E-QFN32 EFM32G200F32-QFN32 EFM32G200F32G-E-QFN32R EFM32G200F16-QFN32 EFM32G200 EFM32 Gecko ARM Cortex-M3 microcontroller embedded processor semiconductor 32-QFN QFN package family surface-mount package 32 KB Flash 8 KB RAM 32 MHz 24 digital I/O 16-bit timer Wake-up Interrupt Controller Memory Protection Unit Stop mode battery-powered sensor industrial control IoT sensor node building automation
Быстрый запрос цены (RFQ)
Заполните все данные — наша команда продаж ответит в течение 24 часов
Артикул Производитель Корпус QTY Целевая цена Итого
✓
Запрос цены отправлен!

Мы ответим на ваш email в течение 24 часов

1
RFQ отправлен
2
Предложение получено
3
Заказ оформлен
4
Оплата
5
Отправлено
6
Доставлено
Просмотреть детали RFQ