Silicon Labs

EFM32TG222F32-QFP48 - 32MHz ARM Cortex-M3 MCU | Silicon Labs

Артикул: EFM32TG222F32-QFP48 ✓ Активен
150 uA/MHz Id 48-pin TQFP (7 x 7 mm) Package 32 MHz Speed 32 kB Memory
MOQ: 1 |

EFM32TG222F32-QFP48 Обзор

The Silicon Labs EFM32TG222F32-QFP48 is a 32-bit ARM Cortex-M3 microcontroller operating up to 32 MHz, with 32 kB of Flash memory, 4 kB of RAM, 37 digital I/O pins, and two 16-bit timers in a 48-pin TQFP package. It combines a low-power embedded platform with energy-saving modes and fast wake-up behavior for compact, battery-powered control systems.

An MCU is a programmable semiconductor that integrates a processor core, memory, peripherals, and I/O into one device. The EFM32TG222F32-QFP48 belongs to the Tiny Gecko product family, which combines the 32-bit ARM Cortex-M3 processor with low-power operation and autonomous peripheral functions. This hierarchy places it within embedded processors, microcontrollers, and energy-sensitive control ICs used to supervise sensors, communications, and actuators.

The device's primary characteristics include its 32 MHz Cortex-M3 core, 32 kB Flash program memory, and 4 kB SRAM. Its 37 digital I/O pins provide substantial board-level connectivity in a 7 x 7 mm, 48-pin TQFP package. Two dedicated 16-bit timers support periodic timing, pulse measurement, and motor or signal-control functions. The integrated analog and communications capabilities make the MCU suitable for connected industrial, medical, and instrumentation products.

The Tiny Gecko architecture emphasizes energy efficiency while retaining 32-bit processing performance. Low-energy operating modes are useful in systems that spend most of their time waiting for an external event, while fast wake-up behavior reduces the delay before processing resumes. Autonomous peripherals can perform selected timing, sensing, or communication tasks with reduced processor involvement, helping contain overall system energy use.

Typical uses include industrial sensor nodes, compact data loggers, building-control endpoints, medical monitoring equipment, battery-powered accessories, and low-power communications modules. The 37 GPIO count can support digital interfaces and discrete controls, while the two 16-bit timers are valuable for precise periodic operations. Designers should also account for the limited 4 kB SRAM when sizing buffers or organizing the firmware.

A key hardware consideration is that the controller's low-power benefit must be balanced against 48-pin routing density in a 7 x 7 mm package. PCB designers should preserve short decoupling paths between each supply pin and its capacitor, provide clean grounding for analog functions, and route high-speed or sensitive signals away from switching nodes. The pin-description and recommended-land-pattern tables in the manufacturer datasheet should be used for final footprint and signal assignment.

This product page combines manufacturer specifications, package and memory details, functional alternatives, application guidance, and practical design considerations to support faster component selection and board planning.

Аналоги без доработки для EFM32TG222F32-QFP48 — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.

Варианты в этой серии

Модели той же серии, совместимые без доработки с EFM32TG222F32-QFP48 (тот же форм-фактор и посадочное место) — отличается по Flash Memory, Package, Timers, Product Type, Digital I/O Pins.

Silicon Labs
Flash Memory: 16 kB
Package: 48-TQFP (7 x 7 mm)
Сравнить с EFM32TG222F32-QFP48 →
Silicon Labs
Package: 48-pin TQFP, 7 mm × 7 mm
Timers: 2 × 16-bit timers
Сравнить с EFM32TG222F32-QFP48 →
Silicon Labs
Flash Memory: 8 KB (8K x 8)
Timers: 2 x 16-bit timers
Сравнить с EFM32TG222F32-QFP48 →
Silicon Labs
Flash Memory: 8 kB (8K x 8)
Package: 48-TQFP (7 x 7 mm)
Digital I/O Pins: 37
Сравнить с EFM32TG222F32-QFP48 →
Silicon Labs
Flash Memory: 8 KB
Package: 48-TQFP (7 x 7 mm)
Сравнить с EFM32TG222F32-QFP48 →
Silicon Labs
Package: 48-pin TQFP, 7 x 7 mm
Timers: 2 x 16-bit
Product Type: ARM Cortex-M3 Microcontroller
Сравнить с EFM32TG222F32-QFP48 →
Silicon Laboratories
Flash Memory: 8 KB (8K x 8)
Package: 48-TQFP (7 x 7 mm)
Сравнить с EFM32TG222F32-QFP48 →

EFM32TG222F32-D-QFP48

✅ Прямая замена
Silicon Labs
📦 48-pin TQFP (7 x 7 mm)
32-bit ARM Cortex-M3 microcontroller · EFM32 Tiny Gecko · 32 MHz · 32 kB · 4 kB · 37 pins · 2 × 16-bit timers · 1.98 V to 3.8 V

Уточнить цену

Открыть даташит →

EFM32TG222F32-D-QFP48R

✅ Прямая замена
📦 48-pin TQFP (7 x 7 mm)
Same 32 MHz Cortex-M3 core, 32 kB Flash, 48-TQFP package, and 32-bit architecture; the D-R suffix identifies a distinct ordering configuration with a 0% difference in these verified headline ratings.

📋 Справочный аналог (нет в каталоге)

EFM32TG222F32-QFP48T

✅ Прямая замена
📦 48-pin TQFP (7 x 7 mm)
Same 32 MHz Cortex-M3 core, 32 kB Flash, 48-TQFP package, and 32-bit architecture; the T suffix identifies a distinct ordering configuration with a 0% difference in these verified headline ratings.

📋 Справочный аналог (нет в каталоге)

EFM32TG222F32-QFP48 Максимальные параметры и электрические характеристики

Product Type 32-bit ARM Cortex-M3 microcontroller
Maximum CPU Frequency 32 MHz
Processor Architecture ARM Cortex-M3, 32-bit
Flash Memory 32 kB
RAM 4 kB
Digital I/O Pins 37 pins
Timer Count 2 timers
Timer Resolution 16-bit
Корпус 48-pin TQFP (7 x 7 mm)
Run Mode Current per Frequency 150 uA/MHz
Configurable Peripheral I/O Locations 66 locations
Тип монтажа Surface mount

Руководство по цоколевке EFM32TG222F32-QFP48 в корпусе 48-pin tqfp (7 x 7 mm)

Цоколевка для EFM32TG222F32-QFP48 (корпус 48-pin tqfp (7 x 7 mm)). Эта цифровая ИС включает выводы GPIO, интерфейсы связи (UART, SPI, I2C) и выводы питания. Обратитесь к техническому описанию производителя для альтернативных функций выводов и вариантов конфигурации. Необходимо для проектирования встраиваемых систем и трассировки печатных плат.

Схема цоколевки корпуса 48-pin tqfp (7 x 7 mm) для EFM32TG222F32-QFP48

Нет подробных данных о распиновке для EFM32TG222F32-QFP48.

Обратитесь к даташиту для полной конфигурации выводов.

Типичное применение

EFM32TG222F32-QFP48 подходит для 6 применениеs: Industrial Sensor Node, Battery-Powered Data Logger, Building Automation Endpoint, Medical Monitoring Device, Low-Power Communications Module, Battery-Powered Instrument.

🏭

Industrial Sensor Node

The EFM32TG222F32-QFP48 fits compact industrial sensor nodes that periodically acquire measurements and transmit results without requiring continuous processor activity. Its 32 MHz ARM Cortex-M3 core handles acquisition logic, local filtering, and communications control, while the low-power platform supports energy-saving modes and fast wake-up behavior. The 37 digital I/O pins provide ample connections for digital sensors, status indicators, and external triggers. Two 16-bit timers can measure sensor intervals or generate periodic sampling events. With 32 kB Flash for firmware and 4 kB RAM for working data, the device is most appropriate for compact control tasks rather than large data buffers.

🧩

Battery-Powered Data Logger

EFM32TG222F32-QFP48 is well suited to battery-powered data loggers that wake, record a measurement, and return to a low-energy state. The 32 MHz Cortex-M3 core can process sensor data quickly enough to reduce the active period, while fast wake-up behavior supports event-driven operation. Its 32 kB Flash stores the application and configuration data, and the 4 kB RAM supports temporary measurement and buffering operations. Two 16-bit timers can establish logging intervals or control duty-cycle timing. Firmware must keep RAM usage bounded, but the combination of local control, compact memory, and low-power modes fits compact environmental and industrial monitoring products.

🏭

Building Automation Endpoint

The EFM32TG222F32-QFP48 can act as a building-automation endpoint for lighting control, occupancy monitoring, or environmental sensing. Its 37 digital I/O pins support inputs from switches and digital sensors as well as outputs for local actuators, and the 66 configurable peripheral I/O locations offer routing flexibility for multiplexed functions. Two 16-bit timers support periodic occupancy scans, delay functions, and pulse-based sensing. The low-power architecture is useful in equipment that spends substantial time idle, while the 32 MHz core can service protocols and local control logic. A production design should use the manufacturer pin table to assign communications, timing, and analog functions without conflicts.

💊

Medical Monitoring Device

EFM32TG222F32-QFP48 supports compact medical-monitoring devices that combine sensor acquisition, threshold evaluation, and local user-interface control. The 32-bit Cortex-M3 processor provides more control capability than an 8-bit device while the 32 MHz clock rate allows responsive signal and system handling. Its 37 digital I/O pins can connect sensors, buttons, indicators, and status signals, while two 16-bit timers support sampling intervals and pulse timing. The device is appropriate for accessory-level monitoring products where compactness and low-power behavior are important. Medical-system designs still require application-specific validation, isolation where applicable, and complete review of all electrical limits and operating-grade details in the manufacturer documentation.

🌐

Low-Power Communications Module

EFM32TG222F32-QFP48 can form the control core of a compact communications module that wakes for packet processing and sleeps between exchanges. Its 32 MHz ARM Cortex-M3 core handles protocol framing, state management, and host-interface logic, while low-energy modes reduce consumption during idle periods. The 37 digital I/O pins provide interfaces for a radio or transceiver, configuration controls, and status signaling. Two 16-bit timers can support packet timing or symbol-processing interfaces. With 32 kB Flash and 4 kB RAM, the controller fits compact protocols and moderate buffering requirements. Stack depth, radio-driver memory demand, and protocol timing should be checked before final firmware allocation.

🔧

Battery-Powered Instrument

The EFM32TG222F32-QFP48 is suitable for portable instruments that combine local measurement, simple controls, and intermittent data transfer. Its 32 kB Flash holds embedded control software, while 4 kB RAM supports acquisition state, calibration constants, and interface buffers. The 37 GPIO pins can connect switches, displays, indicators, and sensor lines, and two 16-bit timers provide precise interval or measurement timing. Low-energy modes and fast wake-up support responsive controls without requiring the processor to remain continuously active. Because RAM is limited, applications requiring large capture buffers should compress data locally or add external storage. Final low-power performance should be assessed using the actual sensor, display, and communication duty cycle.

Сводка рекомендуемых товаров

EFM32TG222F32-D-QFP48 Silicon Labs Используется в: Industrial Sensor Node, Building Automation Endpoint, Medical Monitoring Device, Low-Power Communications Module EFM32TG222F32-D-QFP48R Same-family ordering option Используется в: Industrial Sensor Node, Battery-Powered Data Logger, Low-Power Communications Module, Battery-Powered Instrument EFM32TG222F32-QFP48 Silicon Labs Используется в: Battery-Powered Data Logger, Battery-Powered Instrument EFM32TG222F32-QFP48T Same-family ordering option Используется в: Building Automation Endpoint, Medical Monitoring Device
What is the EFM32TG222F32-QFP48?
The EFM32TG222F32-QFP48 is a 32-bit ARM Cortex-M3 microcontroller from Silicon Labs, operating up to 32 MHz in a 48-pin TQFP package. According to the Silicon Labs product page, it provides 32 kB of Flash, 4 kB of RAM, 37 digital I/O pins, and two 16-bit timers. Its low-power architecture, energy-saving modes, and fast wake-up behavior make it appropriate for compact and battery-powered embedded systems.
What are the key specifications of EFM32TG222F32-QFP48 that engineers should know?
The key specifications are a 32 MHz ARM Cortex-M3 core, 32 kB of Flash, 4 kB of RAM, 37 digital I/O pins, and two 16-bit timers. The manufacturer also identifies 66 configurable peripheral I/O locations. The EFM32TG222F32-QFP48 uses a 48-pin TQFP package measuring 7 x 7 mm, combining a relatively broad GPIO interface and moderate embedded memory in a compact surface-mount footprint.
Where can I download the EFM32TG222F32-QFP48 datasheet PDF?
The authoritative EFM32TG222F32-QFP48 datasheet is available through the Silicon Labs device page linked on this product page. The manufacturer datasheet should be used for the complete pin-description table, electrical limits, memory map, timing information, and recommended package land pattern. The EFM32TG222F32-QFP48 product page is the best starting point because it links the documentation associated with the exact device and package.
Where is the pinout for the EFM32TG222F32-QFP48 48-TQFP package?
The EFM32TG222F32-QFP48 pinout is documented in the manufacturer datasheet, which contains the complete 48-pin assignment and package drawings. Use the pin-description table to assign power, ground, reset, clock, and peripheral signals before laying out the PCB. The device is supplied in a 7 x 7 mm TQFP package, so pin numbering and the recommended footprint must be checked against the exact mechanical drawing.
How much Flash and RAM does the EFM32TG222F32-QFP48 have?
The EFM32TG222F32-QFP48 contains 32 kB of Flash memory and 4 kB of RAM. According to the Silicon Labs product information, its 32 MHz Cortex-M3 core and 32 kB Flash capacity suit compact control applications that require embedded code storage without a large external memory subsystem. The 4 kB SRAM should be considered when sizing buffers, task stacks, and communication data structures.
What can replace the EFM32TG222F32-QFP48?
The EFM32TG222F32-D-QFP48 and EFM32TG222F32-D-QFP48R are the closest listed same-family options, both using the 48-TQFP package with a 32 MHz Cortex-M3 core and 32 kB Flash. The suffix-specific ordering details must be checked against the required production configuration. A candidate should replace the part only after its pin assignments, temperature rating, qualification status, and firmware support have been reviewed.
Is EFM32TG222F32-D-QFP48R pin-compatible with EFM32TG222F32-QFP48?
The EFM32TG222F32-D-QFP48R is a 48-TQFP, 32 MHz Cortex-M3 device with 32 kB Flash, making it the closest listed same-family alternative. Its D and R suffixes require review for the associated ordering, packaging, and qualification details. Treat it as a drop-in candidate only after the manufacturer pin table and ordering information confirm compatibility with the target product's PCB and production requirements.
What is the best Silicon Labs equivalent for EFM32TG222F32-QFP48?
The Silicon Labs EFM32TG222F32-D-QFP48 is the closest same-brand equivalent listed for the EFM32TG222F32-QFP48. Both are identified as 32 MHz, 32-bit Cortex-M3 Tiny Gecko microcontrollers with 32 kB Flash in a 48-pin TQFP package. The EFM32TG222F32-D-QFP48R is another nearby option, but its suffix-specific ordering and qualification attributes should be confirmed for the intended product configuration.
When should I choose EFM32TG222F32-QFP48 over EFM32TG222F32-D-QFP48?
Choose the EFM32TG222F32-QFP48 when it is the exact orderable configuration specified for the design. Choose the EFM32TG222F32-D-QFP48 only after confirming that its suffix-specific attributes meet the production requirements. Both parts share the principal 32 MHz Cortex-M3, 32 kB Flash, 48-TQFP characteristics, so the final choice should be based on the manufacturer's ordering table rather than generic headline specifications.
Is the EFM32TG222F32-QFP48 suitable for battery-powered sensor applications?
Yes, the EFM32TG222F32-QFP48 is suitable for battery-powered sensor applications because its Tiny Gecko platform emphasizes low-power operation, energy-saving modes, and fast wake-up behavior. The manufacturer identifies it for energy-sensitive applications. Actual battery life still depends on the selected operating mode, sensor duty cycle, radio activity, regulator efficiency, and the 4 kB RAM available to the firmware.
What is the difference between EFM32TG222F32-QFP48 and EFM32TG222F32-QFP48T?
Both entries identify a 32 MHz, 32-bit Cortex-M3 Tiny Gecko microcontroller with 32 kB Flash in a 48-pin TQFP package. The T suffix denotes a distinct ordering form, and the exact reel, tray, temperature, or qualification implications must be checked in the manufacturer ordering information. For a drop-in decision, verify the mechanical package, all pin assignments, operating grade, and the suffix-specific attributes before substituting one order code for the other.
How many GPIO and timer resources does the EFM32TG222F32-QFP48 provide?
The EFM32TG222F32-QFP48 provides 37 digital I/O pins and two 16-bit timers. According to the Silicon Labs device information, it also offers 66 configurable peripheral I/O locations, allowing signal assignment across the device's peripheral multiplexing architecture. This combination supports digital controls, sensor inputs, communications, and periodic timing functions within the constraints of its 48-pin TQFP footprint.
Does the EFM32TG222F32-QFP48 need an external memory for firmware?
The EFM32TG222F32-QFP48 does not require external memory for firmware up to its built-in 32 kB Flash capacity. This internal program memory is sufficient for compact embedded control firmware, while 4 kB of RAM supports working data and stack space. The manufacturer datasheet provides the memory map, so final firmware sizing must include the bootloader, application code, data initialization, and stack requirements.
Where can I buy EFM32TG222F32-QFP48 and check its price?
Use the Request a Quote form on this page to obtain current EFM32TG222F32-QFP48 pricing, stock status, lead time, and orderable packaging information. The product is listed by Silicon Labs and is also offered in 48-TQFP form by authorized distributors, but commercial conditions can change. Submit the required quantity and target delivery date with your quote request for an actionable response.
What is the lead time for EFM32TG222F32-QFP48?
Current lead time for the EFM32TG222F32-QFP48 should be confirmed through the Request a Quote form on this page. Lead time can vary with order quantity, selected package and tape-and-reel configuration, inventory position, and manufacturing conditions. Include the target quantity, desired shipping date, and exact order code in the request so the supplier can confirm the correct production configuration.
Is the EFM32TG222F32-QFP48 in stock?
Stock for the EFM32TG222F32-QFP48 is not fixed and should be checked through the Request a Quote form on this page. Submit the exact MPN, required quantity, and acceptable delivery date for current availability confirmation. Because ordering suffixes can distinguish tray and reel configurations, include the desired shipping presentation to avoid evaluating a different packaged order code.

Справочные инженерные данные для EFM32TG222F32-QFP48 — сравнение, рекомендации по проектированию и информация о соответствии.

Руководство по выбору

Choose the EFM32TG222F32-QFP48 when the design specifically calls for its exact ordering configuration and needs a compact 32 MHz Cortex-M3 controller with 32 kB Flash, 4 kB RAM, 37 GPIO, and two 16-bit timers. The EFM32TG222F32-D-QFP48 is the closest same-brand alternative when its ordering attributes satisfy the production requirements. The EFM32TG222F32-D-QFP48R is another same-family option for designs using its specified ordering or shipping form. All three listed alternatives use the same 48-pin TQFP package and share the verified 32 MHz Cortex-M3 and 32 kB Flash ratings, so pin assignment, qualification, temperature grade, lifecycle requirements, and exact suffix rules should drive the final choice. No cross-brand drop-in replacement was established. Devices with less Flash or a different processor architecture should be treated as redesign candidates rather than direct substitutes.

Сравнение с аналогами

Параметр Этот товар EFM32TG222F32-D-QFP48 EFM32TG222F32-D-QFP48R EFM32TG222F32-QFP48T
Brand Silicon Labs Silicon Labs Silicon Labs Silicon Labs
Package 48-pin TQFP (7 x 7 mm) 48-pin TQFP (7 x 7 mm) - same 48-pin TQFP (7 x 7 mm) - same 48-pin TQFP (7 x 7 mm) - same
CPU Core ARM Cortex-M3 ARM Cortex-M3 ARM Cortex-M3 ARM Cortex-M3
Maximum CPU Frequency 32 MHz 32 MHz 32 MHz 32 MHz
Flash Memory 32 kB 32 kB 32 kB 32 kB
Product Family EFM32 Tiny Gecko EFM32 Tiny Gecko EFM32 Tiny Gecko EFM32 Tiny Gecko

Ключевые отличия

  • Combines a compact 48-pin package with 37 GPIO (против EFM32TG222F32-D-QFP48)
  • Matches the closest alternatives on core and memory (против EFM32TG222F32-D-QFP48R)
  • Broad peripheral routing in a low-power MCU (против EFM32TG222F32-QFP48T)

Заметки по проектированию

Plan the power tree around the device's low-energy operating modes rather than assuming continuous 32 MHz operation. The manufacturer identifies 150 uA/MHz in run mode, while the specific stop-mode current must be checked in the manufacturer datasheet. Keep wake-up paths short, gate unused peripherals in firmware, and measure the complete sensor-and-communications duty cycle because board-level regulator and sensor currents can dominate a battery-powered design.

Place the required decoupling capacitors next to their associated supply pins and use a low-impedance ground plane. Follow the exact 48-pin TQFP land pattern and pin-1 orientation shown in the manufacturer package drawing. Because the package is only 7 x 7 mm with 48 leads, verify courtyard clearance, solder-paste volume, assembly capabilities, and probe access before releasing the PCB layout.

Assign clock, communications, timer, and analog-sensitive functions from the complete pin-description table rather than choosing pins solely by convenience. The MCU provides 66 configurable peripheral I/O locations, so several functions can be routed to multiple pins. Review alternate-function conflicts in the device configuration, keep sensitive traces short and continuous, and maintain controlled return paths beneath high-speed or analog signals.

Do not size firmware and data structures solely from the 32 kB Flash figure; account separately for the 4 kB SRAM, interrupt and task stacks, peripheral-driver buffers, and retained state. Low-power designs should also verify wake sources, clock startup behavior, and pin states during reset. Confirm the exact suffix and package ordering attributes before production release, because the D, R, and T forms may differ in ordering or shipping configuration.

Информация о соответствии

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Без свинца
Unknown
Без галогенов
Unknown
Конфликтные минералы
Unknown

No definitive compliance declaration for the exact EFM32TG222F32-QFP48 order code was established. Confirm RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals status for the selected suffix using the manufacturer product page or declaration documentation.

Данные проверены: 2026-11-10 — данные проверены и курируются командой компонентной инженерии XAIPART

Похожие запросы

efm32tg222f32 qfp48 efm32tg222f32 d qfp48r EFM32TG222F32-QFP48 datasheet EFM32TG222F32-QFP48 datasheet pdf EFM32TG222F32-QFP48 pinout EFM32TG222F32-QFP48 equivalent EFM32TG222F32-QFP48 replacement EFM32TG222F32-QFP48 vs EFM32TG222F32-D-QFP48 Silicon Labs EFM32TG222F32-QFP48 EFM32TG222F32-QFP48 32MHz Cortex-M3 EFM32TG222F32-QFP48 48 TQFP EFM32TG222F32-QFP48 price EFM32TG222F32-QFP48 stock EFM32TG222F32-QFP48 low power application

Связанные компоненты & термины

Silicon Labs EFM32TG222F32-QFP48 EFM32TG222F32-D-QFP48 EFM32TG222F32-D-QFP48R EFM32TG222F32-QFP48T EFM32 Tiny Gecko ARM Cortex-M3 32-bit microcontroller MCU embedded microcontroller low-power microcontroller energy-saving modes fast wake-up Flash memory RAM digital I/O GPIO 16-bit timer autonomous peripherals 48-pin TQFP 7 x 7 mm package surface mount battery-powered systems industrial sensor nodes medical monitoring
Быстрый запрос цены (RFQ)
Заполните все данные — наша команда продаж ответит в течение 24 часов
Артикул Производитель Корпус QTY Целевая цена Итого
✓
Запрос цены отправлен!

Мы ответим на ваш email в течение 24 часов

1
RFQ отправлен
2
Предложение получено
3
Заказ оформлен
4
Оплата
5
Отправлено
6
Доставлено
Просмотреть детали RFQ