EFM32TG222F32-QFP48 - 32MHz ARM Cortex-M3 MCU | Silicon Labs
MPN: EFM32TG222F32-QFP48 ✓ AktifEFM32TG222F32-QFP48 Genel Bakış
An MCU is a programmable semiconductor that integrates a processor core, memory, peripherals, and I/O into one device. The EFM32TG222F32-QFP48 belongs to the Tiny Gecko product family, which combines the 32-bit ARM Cortex-M3 processor with low-power operation and autonomous peripheral functions. This hierarchy places it within embedded processors, microcontrollers, and energy-sensitive control ICs used to supervise sensors, communications, and actuators.
The device's primary characteristics include its 32 MHz Cortex-M3 core, 32 kB Flash program memory, and 4 kB SRAM. Its 37 digital I/O pins provide substantial board-level connectivity in a 7 x 7 mm, 48-pin TQFP package. Two dedicated 16-bit timers support periodic timing, pulse measurement, and motor or signal-control functions. The integrated analog and communications capabilities make the MCU suitable for connected industrial, medical, and instrumentation products.
The Tiny Gecko architecture emphasizes energy efficiency while retaining 32-bit processing performance. Low-energy operating modes are useful in systems that spend most of their time waiting for an external event, while fast wake-up behavior reduces the delay before processing resumes. Autonomous peripherals can perform selected timing, sensing, or communication tasks with reduced processor involvement, helping contain overall system energy use.
Typical uses include industrial sensor nodes, compact data loggers, building-control endpoints, medical monitoring equipment, battery-powered accessories, and low-power communications modules. The 37 GPIO count can support digital interfaces and discrete controls, while the two 16-bit timers are valuable for precise periodic operations. Designers should also account for the limited 4 kB SRAM when sizing buffers or organizing the firmware.
A key hardware consideration is that the controller's low-power benefit must be balanced against 48-pin routing density in a 7 x 7 mm package. PCB designers should preserve short decoupling paths between each supply pin and its capacitor, provide clean grounding for analog functions, and route high-speed or sensitive signals away from switching nodes. The pin-description and recommended-land-pattern tables in the manufacturer datasheet should be used for final footprint and signal assignment.
This product page combines manufacturer specifications, package and memory details, functional alternatives, application guidance, and practical design considerations to support faster component selection and board planning.
Drop-in alternatifler için EFM32TG222F32-QFP48 — aynı paket, pin-başına uyumlu. PCB yeniden montajı gerektiren farklı paket bileşenleri dışlanmıştır.
Bu Serideki Variantlar
Yedek parça uyumlu olan aynı serideki modeller EFM32TG222F32-QFP48 (aynı form faktörü ve ayağa oturma) — farklı olan Flash Memory, Package, Timers, Product Type, Digital I/O Pins.
EFM32TG222F32-D-QFP48
✅ YerleştirmeFiyat için iletişime geçin
Veri Şablonunu Görüntüle →EFM32TG222F32-D-QFP48R
✅ Yerleştirme📋 Katalogda Olmayan Referans Alternatifi
EFM32TG222F32-QFP48T
✅ Yerleştirme📋 Katalogda Olmayan Referans Alternatifi
EFM32TG222F32-QFP48 Maksimum Değerlendirmeler & Elektriksel Özellikler
| Product Type | 32-bit ARM Cortex-M3 microcontroller |
| Maximum CPU Frequency | 32 MHz |
| Processor Architecture | ARM Cortex-M3, 32-bit |
| Flash Memory | 32 kB |
| RAM | 4 kB |
| Digital I/O Pins | 37 pins |
| Timer Count | 2 timers |
| Timer Resolution | 16-bit |
| Paket | 48-pin TQFP (7 x 7 mm) |
| Run Mode Current per Frequency | 150 uA/MHz |
| Configurable Peripheral I/O Locations | 66 locations |
| Montaj Türü | Surface mount |
EFM32TG222F32-QFP48 48-pin tqfp (7 x 7 mm) Pin Yapısı Kılavuzu
EFM32TG222F32-QFP48 (48-pin tqfp (7 x 7 mm) paket) için pin yapısı. Bu dijital IC, GPIO, iletişim arayüzleri (UART, SPI, I2C) ve güç pinleri içerir. Alternatif pin işlevleri ve yapılandırma seçenekleri için üretici veri kitapçığını referans alın. Tünel sistem tasarımı ve PCB yerleşimi için temel bir bileşendir.
Ayrıntılı pin çıkış verisi mevcut değil: EFM32TG222F32-QFP48.
Aşağıdaki veri sayfası tam pin konfigürasyonu için.
Tipik Uygulamalar
EFM32TG222F32-QFP48 için uygundur 6 uygulamas: Industrial Sensor Node, Battery-Powered Data Logger, Building Automation Endpoint, Medical Monitoring Device, Low-Power Communications Module, Battery-Powered Instrument.
Industrial Sensor Node
The EFM32TG222F32-QFP48 fits compact industrial sensor nodes that periodically acquire measurements and transmit results without requiring continuous processor activity. Its 32 MHz ARM Cortex-M3 core handles acquisition logic, local filtering, and communications control, while the low-power platform supports energy-saving modes and fast wake-up behavior. The 37 digital I/O pins provide ample connections for digital sensors, status indicators, and external triggers. Two 16-bit timers can measure sensor intervals or generate periodic sampling events. With 32 kB Flash for firmware and 4 kB RAM for working data, the device is most appropriate for compact control tasks rather than large data buffers.
Önerilen
Battery-Powered Data Logger
EFM32TG222F32-QFP48 is well suited to battery-powered data loggers that wake, record a measurement, and return to a low-energy state. The 32 MHz Cortex-M3 core can process sensor data quickly enough to reduce the active period, while fast wake-up behavior supports event-driven operation. Its 32 kB Flash stores the application and configuration data, and the 4 kB RAM supports temporary measurement and buffering operations. Two 16-bit timers can establish logging intervals or control duty-cycle timing. Firmware must keep RAM usage bounded, but the combination of local control, compact memory, and low-power modes fits compact environmental and industrial monitoring products.
Önerilen
Building Automation Endpoint
The EFM32TG222F32-QFP48 can act as a building-automation endpoint for lighting control, occupancy monitoring, or environmental sensing. Its 37 digital I/O pins support inputs from switches and digital sensors as well as outputs for local actuators, and the 66 configurable peripheral I/O locations offer routing flexibility for multiplexed functions. Two 16-bit timers support periodic occupancy scans, delay functions, and pulse-based sensing. The low-power architecture is useful in equipment that spends substantial time idle, while the 32 MHz core can service protocols and local control logic. A production design should use the manufacturer pin table to assign communications, timing, and analog functions without conflicts.
Önerilen
Medical Monitoring Device
EFM32TG222F32-QFP48 supports compact medical-monitoring devices that combine sensor acquisition, threshold evaluation, and local user-interface control. The 32-bit Cortex-M3 processor provides more control capability than an 8-bit device while the 32 MHz clock rate allows responsive signal and system handling. Its 37 digital I/O pins can connect sensors, buttons, indicators, and status signals, while two 16-bit timers support sampling intervals and pulse timing. The device is appropriate for accessory-level monitoring products where compactness and low-power behavior are important. Medical-system designs still require application-specific validation, isolation where applicable, and complete review of all electrical limits and operating-grade details in the manufacturer documentation.
Önerilen
Low-Power Communications Module
EFM32TG222F32-QFP48 can form the control core of a compact communications module that wakes for packet processing and sleeps between exchanges. Its 32 MHz ARM Cortex-M3 core handles protocol framing, state management, and host-interface logic, while low-energy modes reduce consumption during idle periods. The 37 digital I/O pins provide interfaces for a radio or transceiver, configuration controls, and status signaling. Two 16-bit timers can support packet timing or symbol-processing interfaces. With 32 kB Flash and 4 kB RAM, the controller fits compact protocols and moderate buffering requirements. Stack depth, radio-driver memory demand, and protocol timing should be checked before final firmware allocation.
Önerilen
Battery-Powered Instrument
The EFM32TG222F32-QFP48 is suitable for portable instruments that combine local measurement, simple controls, and intermittent data transfer. Its 32 kB Flash holds embedded control software, while 4 kB RAM supports acquisition state, calibration constants, and interface buffers. The 37 GPIO pins can connect switches, displays, indicators, and sensor lines, and two 16-bit timers provide precise interval or measurement timing. Low-energy modes and fast wake-up support responsive controls without requiring the processor to remain continuously active. Because RAM is limited, applications requiring large capture buffers should compress data locally or add external storage. Final low-power performance should be assessed using the actual sensor, display, and communication duty cycle.
Önerilen
Önerilen Ürünler Özeti
Mühendislik referans verileri: EFM32TG222F32-QFP48 — karşılaştırma, tasarım rehberi ve uyumluluk bilgileri.
Seçim Kılavuzu
Alternatiflerle Karşılaştırma
| Parametre | Bu Ürün | EFM32TG222F32-D-QFP48 | EFM32TG222F32-D-QFP48R | EFM32TG222F32-QFP48T |
|---|---|---|---|---|
| Brand | Silicon Labs | Silicon Labs | Silicon Labs | Silicon Labs |
| Package | 48-pin TQFP (7 x 7 mm) | 48-pin TQFP (7 x 7 mm) - same | 48-pin TQFP (7 x 7 mm) - same | 48-pin TQFP (7 x 7 mm) - same |
| CPU Core | ARM Cortex-M3 | ARM Cortex-M3 | ARM Cortex-M3 | ARM Cortex-M3 |
| Maximum CPU Frequency | 32 MHz | 32 MHz | 32 MHz | 32 MHz |
| Flash Memory | 32 kB | 32 kB | 32 kB | 32 kB |
| Product Family | EFM32 Tiny Gecko | EFM32 Tiny Gecko | EFM32 Tiny Gecko | EFM32 Tiny Gecko |
Ana Farklılayıcılar
- Combines a compact 48-pin package with 37 GPIO (karşılaştırma:EFM32TG222F32-D-QFP48)
- Matches the closest alternatives on core and memory (karşılaştırma:EFM32TG222F32-D-QFP48R)
- Broad peripheral routing in a low-power MCU (karşılaştırma:EFM32TG222F32-QFP48T)
Tasarım Notları
Plan the power tree around the device's low-energy operating modes rather than assuming continuous 32 MHz operation. The manufacturer identifies 150 uA/MHz in run mode, while the specific stop-mode current must be checked in the manufacturer datasheet. Keep wake-up paths short, gate unused peripherals in firmware, and measure the complete sensor-and-communications duty cycle because board-level regulator and sensor currents can dominate a battery-powered design.
Place the required decoupling capacitors next to their associated supply pins and use a low-impedance ground plane. Follow the exact 48-pin TQFP land pattern and pin-1 orientation shown in the manufacturer package drawing. Because the package is only 7 x 7 mm with 48 leads, verify courtyard clearance, solder-paste volume, assembly capabilities, and probe access before releasing the PCB layout.
Assign clock, communications, timer, and analog-sensitive functions from the complete pin-description table rather than choosing pins solely by convenience. The MCU provides 66 configurable peripheral I/O locations, so several functions can be routed to multiple pins. Review alternate-function conflicts in the device configuration, keep sensitive traces short and continuous, and maintain controlled return paths beneath high-speed or analog signals.
Do not size firmware and data structures solely from the 32 kB Flash figure; account separately for the 4 kB SRAM, interrupt and task stacks, peripheral-driver buffers, and retained state. Low-power designs should also verify wake sources, clock startup behavior, and pin states during reset. Confirm the exact suffix and package ordering attributes before production release, because the D, R, and T forms may differ in ordering or shipping configuration.
Uyumluluk Bilgisi
No definitive compliance declaration for the exact EFM32TG222F32-QFP48 order code was established. Confirm RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals status for the selected suffix using the manufacturer product page or declaration documentation.