EFM32TG822F16-D-QFP48 - 32MHz Cortex-M3 16KB Flash MCU
Артикул: EFM32TG822F16-D-QFP48 ✓ АктивенEFM32TG822F16-D-QFP48 Обзор
A microcontroller is a programmable system-on-chip that integrates a CPU core, memory, and peripherals into one device. In the EFM32 family hierarchy, the EFM32TG822 is a Tiny Gecko device built around the ARM Cortex-M3 architecture. The 16 kB Flash configuration is appropriate for compact control firmware, while the 4 kB RAM supports working data, stack operation, and small communication buffers. The 37 digital I/O pins allow connections to sensors, actuators, human-interface devices, and industrial control signals.
Key device characteristics include operation from a low-voltage supply range of 1.98 V to 3.8 V, a 32 MHz CPU frequency, and a 48-TQFP surface-mount package measuring 7 x 7 mm. Silicon Labs describes the platform as combining low-energy techniques, fast wake-up times, and energy-saving modes. These characteristics make the MCU useful in battery-operated sensors, compact industrial controllers, building automation equipment, and connected industrial sensing systems where standby energy use is important.
The Cortex-M3 core provides a 32-bit processing architecture suitable for event-driven firmware, protocol handling, and real-time control loops. Two 16-bit timers support periodic timing, input capture, output compare, and basic motor or sensing tasks. The device family also integrates configurable peripheral functions for communication and control, allowing firmware to consolidate functions that would otherwise require additional discrete logic.
A typical design uses the EFM32TG822F16-D-QFP48 as the central controller for reading an environmental sensor, managing a low-power radio link, and driving a small actuator or display. The 48-pin package requires careful decoupling and a stable clock implementation, while firmware should use the low-energy modes to reduce consumption between events. For motor-control or motor-control-oriented systems, designers should verify the required timer resources, pin multiplexing, and drive-current capability in the device documentation.
The key engineering trade-off is the compact 16 kB Flash budget. This device is well suited to control-oriented products with focused firmware, but applications requiring larger protocol stacks, extensive data logging, or complex graphics should size the firmware and RAM margin before committing to the layout. This page consolidates the device specifications, package information, practical application guidance, and same-footprint alternatives for engineering evaluation.
Аналоги без доработки для EFM32TG822F16-D-QFP48 — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.
Варианты в этой серии
Модели той же серии, совместимые без доработки с EFM32TG822F16-D-QFP48 (тот же форм-фактор и посадочное место) — отличается по Package, Product Type, Digital I/O Pins, Flash Memory, Low-Power Features.
EFM32TG822F32-QFP48
✅ Прямая заменаУточнить цену
Открыть даташит →EFM32TG822F16-QFP48
✅ Прямая заменаУточнить цену
Открыть даташит →EFM32TG822F16-QFP48T
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
EFM32TG822F8-D-QFP48
✅ Прямая заменаУточнить цену
Открыть даташит →EFM32TG822F32-D-QFP48
✅ Прямая заменаУточнить цену
Открыть даташит →EFM32TG822F16-D-QFP48 Максимальные параметры и электрические характеристики
| Product Type | 32-bit ARM Cortex-M3 microcontroller |
| Series | EFM32 Tiny Gecko |
| CPU Core | ARM Cortex-M3 |
| Maximum CPU Speed | 32 MHz |
| Flash Memory | 16 kB |
| RAM | 4 kB |
| Digital I/O Pins | 37 |
| Timers | 2 x 16-bit timers |
| Supply Voltage Range | 1.98 V to 3.8 V |
| Корпус | 48-TQFP (7 x 7 mm) |
| Тип монтажа | Surface mount |
| Рабочая температура | -40 °C to +85 °C |
| Core Architecture | 32-bit |
| Low-Power Features | Energy-saving modes and fast wake-up times |
| Programmable Peripheral I/O Locations | 68 configurable peripheral I/O locations |
| Разрядность шины данных | 32-bit |
| Program Memory Type | Flash |
Руководство по цоколевке EFM32TG822F16-D-QFP48 в корпусе 48-tqfp (7 x 7 mm)
Цоколевка для EFM32TG822F16-D-QFP48 (корпус 48-tqfp (7 x 7 mm)). Эта цифровая ИС включает выводы GPIO, интерфейсы связи (UART, SPI, I2C) и выводы питания. Обратитесь к техническому описанию производителя для альтернативных функций выводов и вариантов конфигурации. Необходимо для проектирования встраиваемых систем и трассировки печатных плат.
Нет подробных данных о распиновке для EFM32TG822F16-D-QFP48.
Обратитесь к даташиту для полной конфигурации выводов.
Типичное применение
EFM32TG822F16-D-QFP48 подходит для 6 применениеs: Battery-Powered Environmental Sensors, Industrial Control and Automation Modules, Building Automation and HVAC Controls, Low-Power Connected Instrumentation, Motor-Control and Mechatronic Interfaces, Compact Wearable and Portable Devices.
Battery-Powered Environmental Sensors
The EFM32TG822F16-D-QFP48 fits compact environmental sensors because its 1.98 V to 3.8 V supply range and 4 kB RAM can support low-power sensing nodes with limited logic overhead. Its 32 MHz ARM Cortex-M3 core handles sensor conditioning, filtering, and local decisions without requiring a higher-power processor. The 37 digital I/O pins leave adequate connections for an I2C or SPI sensor, status indicator, and wake-up hardware. Silicon Labs highlights fast wake-up times and energy-saving modes, which help the node remain responsive while reducing activity between measurement intervals. Firmware should disable unused peripherals, select the lowest suitable operating mode, and schedule sampling through its timer resources. The 16 kB Flash limit should be checked against the complete sensing and communications stack before layout release.
Рекомендуется
Industrial Control and Automation Modules
The EFM32TG822F16-D-QFP48 is appropriate for small industrial control modules that coordinate discrete sensors, relay logic, and status interfaces. Its 32 MHz Cortex-M3 core supports deterministic interrupt handling, while two 16-bit timers provide timing resources for periodic scanning and output functions. The 48-TQFP package exposes 37 digital I/O pins for digital sensors, actuator commands, and isolation or interface components. The specified -40 °C to +85 °C operating range covers common industrial environments. For designs requiring wider voltage inputs, add an appropriate protected interface layer rather than applying excess voltage directly to the MCU. Firmware should include watchdog and fault-response routines, and the PCB should provide clean decoupling plus a defined programming header for production programming and field updates.
Рекомендуется
Building Automation and HVAC Controls
The EFM32TG822F16-D-QFP48 can serve as the controller for a room thermostat, HVAC interface, or distributed building-automation node. Its 37 digital I/O pins support switches, alarm inputs, relay drivers, and bus transceiver connections, while the two 16-bit timers support debounce, periodic sampling, and control timing. Low-energy operating modes are valuable in buildings where controllers spend most of their time waiting for events or scheduled updates. The Cortex-M3 architecture permits local logic execution and reduces reliance on a higher-level controller for simple decisions. Keep the layout away from high-current switching stages, provide a regulated 3.3 V rail within the stated range, and reserve firmware space for communication handlers, diagnostics, and configuration storage. A larger-Flash sibling is useful when the production firmware includes extensive networking or update features.
Рекомендуется
Low-Power Connected Instrumentation
The EFM32TG822F16-D-QFP48 is useful for compact connected instruments that gather local measurements and transmit summarized data. The 32 MHz ARM Cortex-M3 core can execute protocol state machines and measurement processing, while the 4 kB RAM accommodates modest buffers. Its fast-wake-up and energy-saving features support duty-cycled operation in handheld or remotely powered equipment. Peripheral functions and the two 16-bit timers help organize acquisition intervals, communication timeouts, and indicator updates without an external timing device. Engineers should choose a communications peripheral and pin multiplexing that do not conflict with the selected I/O assignments. Because the 16 kB Flash partition is relatively small, use linker-section planning to reserve bootloader or recovery space when the firmware supports field updates.
Рекомендуется
Motor-Control and Mechatronic Interfaces
The EFM32TG822F16-D-QFP48 can be used in a mechatronic controller that supervises motor commands, position sensing, and system interlocks. Its two 16-bit timers provide a basis for timing motor-control or input-capture functions, and its 37 digital I/O pins can connect encoders, limit switches, gate-driver interfaces, and fault signals. The 32 MHz Cortex-M3 core is also suitable for coordinated control logic and communication with a higher-level controller. Actual motor performance depends on the selected timer PWM channels, pin multiplexing, and external driver stage. Keep switching-node routing away from sensitive MCU inputs, use a dedicated regulated supply path for the processor, and validate timing margins at the lowest operating voltage. The -40 °C to +85 °C rating supports industrial equipment when the external power stage is appropriately protected.
Рекомендуется
Compact Wearable and Portable Devices
The EFM32TG822F16-D-QFP48 fits portable accessories that perform simple control or sensor-hub functions within a strict power and memory budget. The 1.98 V to 3.8 V operating range can simplify connection to a low-energy power rail, while the low-power platform supports sleep between user interactions. Its 37 digital I/O pins are sufficient for buttons, indicators, haptic signals, and external sensor interfaces, and the 4 kB RAM is adequate for lightweight buffering. Designers should use the lowest supported supply voltage for the selected peripherals and avoid leaving analog or digital interfaces unintentionally enabled. Firmware size must remain within 16 kB, including drivers, communication code, and any dual-image update mechanism. For more elaborate wearable logic, the 32 kB Flash EFM32TG822 variant provides additional code margin without changing the package footprint.
Рекомендуется
Сводка рекомендуемых товаров
Справочные инженерные данные для EFM32TG822F16-D-QFP48 — сравнение, рекомендации по проектированию и информация о соответствии.
Руководство по выбору
Сравнение с аналогами
| Параметр | Этот товар | EFM32TG822F32-QFP48 | EFM32TG822F16-QFP48 | EFM32TG822F16-QFP48T | EFM32TG822F8-D-QFP48 | EFM32TG822F32-D-QFP48 |
|---|---|---|---|---|---|---|
| Brand | Silicon Labs | Silicon Labs | Silicon Labs | Silicon Labs | Silicon Labs | Silicon Labs |
| Package | 48-TQFP (7 x 7 mm) | 48-TQFP (7 x 7 mm) - same | 48-TQFP (7 x 7 mm) - same | 48-TQFP (7 x 7 mm) - same | 48-TQFP (7 x 7 mm) - same | 48-TQFP (7 x 7 mm) - same |
| Flash Memory | 16 kB | 32 kB | 16 kB | 16 kB | 8 kB | 32 kB |
Ключевые отличия
- Balanced memory configuration for compact control firmware (против EFM32TG822F32-QFP48)
- Matches the core resource profile of the higher-Flash family member (против EFM32TG822F32-D-QFP48)
- Provides twice the Flash of the smallest same-footprint option (против EFM32TG822F8-D-QFP48)
Заметки по проектированию
Design the supply for the stated 1.98 V to 3.8 V operating range and place the recommended input and output decoupling capacitors close to their designated pins. Keep analog, sensor, and communications supply branches separate from noisy actuator branches where possible. Review peripheral current requirements at the operating temperature because the MCU core, communications blocks, and external loads contribute different current levels. Enable only the peripherals required by the active power mode.
Route the 48-pin TQFP using the manufacturer pin-description table rather than assuming a generic numbering arrangement. Keep the exposed perimeter pads clear of plated-through-hole and copper features that could interfere with soldering or rework. Provide a dedicated programming interface, test points for supply, reset, and clock signals, and maintain short return paths for high-frequency or sensitive analog inputs.
Do not select this device solely by its 32 MHz clock rating. Its 16 kB Flash partition is the main firmware constraint, while 4 kB RAM must accommodate the stack, interrupt context, buffers, and application data. Link the final build early, reserve any required bootloader or recovery region, and verify that peripheral pin multiplexing does not conflict with externally connected signals. Validate suffix-specific temperature and packing requirements before ordering.
Estimated firmware power optimization: current consumption depends on clock frequency, active peripherals, operating mode, and supply voltage, so it cannot be derived from the processor speed alone. Measure the assembled product across sleep, active-idle, and workload states, then confirm that the regulator, battery, and external circuitry support the measured peak and average demand. Avoid extrapolating battery life from an idle operating-mode figure.
Информация о соответствии
RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals declarations were not established by the cited manufacturer and distributor pages. The listed operating temperature is -40 °C to +85 °C, but temperature rating alone does not establish automotive qualification.