Silicon Labs

EFM32TG822F16-D-QFP48 - 32MHz Cortex-M3 16KB Flash MCU

MPN: EFM32TG822F16-D-QFP48 ✓ Nakahanda
1.98 V to 3.8 V Vdss 48-TQFP (7 x 7 mm) Package 32 MHz Speed 16 kB Memory
MOQ: 1 |

EFM32TG822F16-D-QFP48 Ulas

The Silicon Labs EFM32TG822F16-D-QFP48 is a 32-bit ARM Cortex-M3 microcontroller with a maximum clock speed of 32 MHz, 16 kB of Flash memory, 4 kB of RAM, 37 digital I/O pins, and two 16-bit timers in a 48-pin TQFP package. It is designed for energy-sensitive embedded applications that require a compact 32-bit control platform with fast wake-up behavior and energy-saving operating modes.

A microcontroller is a programmable system-on-chip that integrates a CPU core, memory, and peripherals into one device. In the EFM32 family hierarchy, the EFM32TG822 is a Tiny Gecko device built around the ARM Cortex-M3 architecture. The 16 kB Flash configuration is appropriate for compact control firmware, while the 4 kB RAM supports working data, stack operation, and small communication buffers. The 37 digital I/O pins allow connections to sensors, actuators, human-interface devices, and industrial control signals.

Key device characteristics include operation from a low-voltage supply range of 1.98 V to 3.8 V, a 32 MHz CPU frequency, and a 48-TQFP surface-mount package measuring 7 x 7 mm. Silicon Labs describes the platform as combining low-energy techniques, fast wake-up times, and energy-saving modes. These characteristics make the MCU useful in battery-operated sensors, compact industrial controllers, building automation equipment, and connected industrial sensing systems where standby energy use is important.

The Cortex-M3 core provides a 32-bit processing architecture suitable for event-driven firmware, protocol handling, and real-time control loops. Two 16-bit timers support periodic timing, input capture, output compare, and basic motor or sensing tasks. The device family also integrates configurable peripheral functions for communication and control, allowing firmware to consolidate functions that would otherwise require additional discrete logic.

A typical design uses the EFM32TG822F16-D-QFP48 as the central controller for reading an environmental sensor, managing a low-power radio link, and driving a small actuator or display. The 48-pin package requires careful decoupling and a stable clock implementation, while firmware should use the low-energy modes to reduce consumption between events. For motor-control or motor-control-oriented systems, designers should verify the required timer resources, pin multiplexing, and drive-current capability in the device documentation.

The key engineering trade-off is the compact 16 kB Flash budget. This device is well suited to control-oriented products with focused firmware, but applications requiring larger protocol stacks, extensive data logging, or complex graphics should size the firmware and RAM margin before committing to the layout. This page consolidates the device specifications, package information, practical application guidance, and same-footprint alternatives for engineering evaluation.

Mga alternatibo na pwedeng ilagay na EFM32TG822F16-D-QFP48 — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.

Variante sa Seri na ito

Katulad na modelo sa serye na katugma sa pagpasok EFM32TG822F16-D-QFP48 (parehas na form factor at footprint) — pagkakaiba sa Package, Product Type, Digital I/O Pins, Flash Memory, Low-Power Features.

Silicon Labs
Package: 48-pin TQFP (7 mm x 7 mm)
Product Type: ARM Cortex-M3 32-bit Microcontroller
Digital I/O Pins: 37 pins
Ikabit sa EFM32TG822F16-D-QFP48 →
Silicon Labs
Package: 48-pin TQFP (7 mm x 7 mm)
Digital I/O Pins: 37 pins
Flash Memory: 32 KB
Ikabit sa EFM32TG822F16-D-QFP48 →
Silicon Labs
Package: 48-pin TQFP, 7 x 7 mm
Product Type: ARM Cortex-M3 Microcontroller
Flash Memory: 32 KB
Ikabit sa EFM32TG822F16-D-QFP48 →
Silicon Labs
Package: 48-pin TQFP, 7 mm x 7 mm
Ikabit sa EFM32TG822F16-D-QFP48 →

EFM32TG822F32-QFP48

✅ Drop-In
Silicon Labs
📦 48-TQFP (7 x 7 mm)
ARM Cortex-M3 Microcontroller · ARM Cortex-M3 · 32 MHz · 32-bit · 32 KB · 4 KB · 37 · 2 x 16-bit

Magkontak para sa presyo

Tingnan ang Datasheet →

EFM32TG822F16-QFP48

✅ Drop-In
Silicon Labs
📦 48-TQFP (7 x 7 mm)
ARM Cortex-M3 32-bit Microcontroller · EFM32 Tiny Gecko · 32 MHz · Single-core ARM Cortex-M3 · 16 kB · 16K x 8 bits · 4 kB · 37 pins

Magkontak para sa presyo

Tingnan ang Datasheet →

EFM32TG822F16-QFP48T

✅ Drop-In
📦 48-TQFP (7 x 7 mm)
Same 16 kB Flash and 32 MHz Cortex-M3 configuration; T suffix denotes a different packing or market variant

📋 Alternatibo na Reference (hindi sa katalogo)

EFM32TG822F8-D-QFP48

✅ Drop-In
Silicon Labs
📦 48-TQFP (7 x 7 mm)
32-bit ARM Cortex-M3 microcontroller · EFM32 Tiny Gecko · ARM Cortex-M3 · 32-bit · 32 MHz · 8 KB · 8K x 8 bits · 2 KB

Magkontak para sa presyo

Tingnan ang Datasheet →

EFM32TG822F32-D-QFP48

✅ Drop-In
Silicon Labs
📦 48-TQFP (7 x 7 mm)
32-bit ARM Cortex-M3 microcontroller · EFM32 Tiny Gecko · ARM Cortex-M3 · 32-bit · 32 MHz · 32 KB · 4 KB · 37 pins

Magkontak para sa presyo

Tingnan ang Datasheet →

EFM32TG822F16-D-QFP48 Mga Pinakamataas na Rating at Electrical Characteristics

Product Type 32-bit ARM Cortex-M3 microcontroller
Series EFM32 Tiny Gecko
CPU Core ARM Cortex-M3
Maximum CPU Speed 32 MHz
Flash Memory 16 kB
RAM 4 kB
Digital I/O Pins 37
Timers 2 x 16-bit timers
Supply Voltage Range 1.98 V to 3.8 V
Packhaging 48-TQFP (7 x 7 mm)
Uri ng Pagpapasok Surface mount
Temperature na Operasyon -40 °C to +85 °C
Core Architecture 32-bit
Low-Power Features Energy-saving modes and fast wake-up times
Programmable Peripheral I/O Locations 68 configurable peripheral I/O locations
Width ng Data Bus 32-bit
Program Memory Type Flash

Gabay sa Pin Configuration ng EFM32TG822F16-D-QFP48 48-tqfp (7 x 7 mm)

Pin configuration para sa EFM32TG822F16-D-QFP48 (48-tqfp (7 x 7 mm) package). Kasama sa digital IC na ito ang GPIO, mga communication interface (UART, SPI, I2C), at mga power pin. Sumangguni sa datasheet ng manufacturer para sa mga alternatibong function ng pin at mga opsyon sa configuration. Mahalaga para sa disenyo ng embedded system at PCB layout.

Pinout diagram ng 48-tqfp (7 x 7 mm) package para sa EFM32TG822F16-D-QFP48

Wala ng detalyadong pinout data na magagamit para sa EFM32TG822F16-D-QFP48.

Sumangguni sa datasheet para sa buong pin configuration.

Tipikal na mga Gamit

EFM32TG822F16-D-QFP48 ay nararapat para sa 6 aplikasyons: Battery-Powered Environmental Sensors, Industrial Control and Automation Modules, Building Automation and HVAC Controls, Low-Power Connected Instrumentation, Motor-Control and Mechatronic Interfaces, Compact Wearable and Portable Devices.

🧩

Battery-Powered Environmental Sensors

The EFM32TG822F16-D-QFP48 fits compact environmental sensors because its 1.98 V to 3.8 V supply range and 4 kB RAM can support low-power sensing nodes with limited logic overhead. Its 32 MHz ARM Cortex-M3 core handles sensor conditioning, filtering, and local decisions without requiring a higher-power processor. The 37 digital I/O pins leave adequate connections for an I2C or SPI sensor, status indicator, and wake-up hardware. Silicon Labs highlights fast wake-up times and energy-saving modes, which help the node remain responsive while reducing activity between measurement intervals. Firmware should disable unused peripherals, select the lowest suitable operating mode, and schedule sampling through its timer resources. The 16 kB Flash limit should be checked against the complete sensing and communications stack before layout release.

🏭

Industrial Control and Automation Modules

The EFM32TG822F16-D-QFP48 is appropriate for small industrial control modules that coordinate discrete sensors, relay logic, and status interfaces. Its 32 MHz Cortex-M3 core supports deterministic interrupt handling, while two 16-bit timers provide timing resources for periodic scanning and output functions. The 48-TQFP package exposes 37 digital I/O pins for digital sensors, actuator commands, and isolation or interface components. The specified -40 °C to +85 °C operating range covers common industrial environments. For designs requiring wider voltage inputs, add an appropriate protected interface layer rather than applying excess voltage directly to the MCU. Firmware should include watchdog and fault-response routines, and the PCB should provide clean decoupling plus a defined programming header for production programming and field updates.

🏠

Building Automation and HVAC Controls

The EFM32TG822F16-D-QFP48 can serve as the controller for a room thermostat, HVAC interface, or distributed building-automation node. Its 37 digital I/O pins support switches, alarm inputs, relay drivers, and bus transceiver connections, while the two 16-bit timers support debounce, periodic sampling, and control timing. Low-energy operating modes are valuable in buildings where controllers spend most of their time waiting for events or scheduled updates. The Cortex-M3 architecture permits local logic execution and reduces reliance on a higher-level controller for simple decisions. Keep the layout away from high-current switching stages, provide a regulated 3.3 V rail within the stated range, and reserve firmware space for communication handlers, diagnostics, and configuration storage. A larger-Flash sibling is useful when the production firmware includes extensive networking or update features.

📡

Low-Power Connected Instrumentation

The EFM32TG822F16-D-QFP48 is useful for compact connected instruments that gather local measurements and transmit summarized data. The 32 MHz ARM Cortex-M3 core can execute protocol state machines and measurement processing, while the 4 kB RAM accommodates modest buffers. Its fast-wake-up and energy-saving features support duty-cycled operation in handheld or remotely powered equipment. Peripheral functions and the two 16-bit timers help organize acquisition intervals, communication timeouts, and indicator updates without an external timing device. Engineers should choose a communications peripheral and pin multiplexing that do not conflict with the selected I/O assignments. Because the 16 kB Flash partition is relatively small, use linker-section planning to reserve bootloader or recovery space when the firmware supports field updates.

⚙️

Motor-Control and Mechatronic Interfaces

The EFM32TG822F16-D-QFP48 can be used in a mechatronic controller that supervises motor commands, position sensing, and system interlocks. Its two 16-bit timers provide a basis for timing motor-control or input-capture functions, and its 37 digital I/O pins can connect encoders, limit switches, gate-driver interfaces, and fault signals. The 32 MHz Cortex-M3 core is also suitable for coordinated control logic and communication with a higher-level controller. Actual motor performance depends on the selected timer PWM channels, pin multiplexing, and external driver stage. Keep switching-node routing away from sensitive MCU inputs, use a dedicated regulated supply path for the processor, and validate timing margins at the lowest operating voltage. The -40 °C to +85 °C rating supports industrial equipment when the external power stage is appropriately protected.

⌚

Compact Wearable and Portable Devices

The EFM32TG822F16-D-QFP48 fits portable accessories that perform simple control or sensor-hub functions within a strict power and memory budget. The 1.98 V to 3.8 V operating range can simplify connection to a low-energy power rail, while the low-power platform supports sleep between user interactions. Its 37 digital I/O pins are sufficient for buttons, indicators, haptic signals, and external sensor interfaces, and the 4 kB RAM is adequate for lightweight buffering. Designers should use the lowest supported supply voltage for the selected peripherals and avoid leaving analog or digital interfaces unintentionally enabled. Firmware size must remain within 16 kB, including drivers, communication code, and any dual-image update mechanism. For more elaborate wearable logic, the 32 kB Flash EFM32TG822 variant provides additional code margin without changing the package footprint.

What is the core architecture and maximum speed of the EFM32TG822F16-D-QFP48?
The EFM32TG822F16-D-QFP48 uses an ARM Cortex-M3 core and operates up to 32 MHz. According to the Silicon Labs product page, it is an ARM Cortex-M3-based microcontroller in the Tiny Gecko family. This combination provides 32-bit instruction handling and deterministic interrupt performance for compact control firmware, protocol handling, and real-time embedded tasks.
How much Flash and RAM does the EFM32TG822F16-D-QFP48 have?
The EFM32TG822F16-D-QFP48 contains 16 kB of Flash memory and 4 kB of RAM. Silicon Labs lists the part as a 32-bit, 32 MHz MCU with 16KB Flash. The memory budget favors focused control firmware and small data buffers, so firmware size, stack depth, and communication-buffer requirements should be reviewed before finalizing a design.
What package and pin count does the EFM32TG822F16-D-QFP48 use?
The EFM32TG822F16-D-QFP48 is offered in a 48-TQFP surface-mount package measuring 7 x 7 mm. The family configuration provides 37 digital I/O pins across the device. Use the manufacturer pin-description table and package drawing to assign tracks, test points, decoupling, and programming signals.
What supply voltage does the EFM32TG822F16-D-QFP48 require?
The EFM32TG822F16-D-QFP48 operates from a 1.98 V to 3.8 V supply. One product listing gives 1.98 V to 3.8 V, while another states 1.85 V to 3.8 V. Design the power tree around the manufacturer operating range and check each peripheral, sensor, and external interface against its own voltage limits.
Where can I download the EFM32TG822F16-D-QFP48 datasheet PDF?
The manufacturer device page and the linked LCSC datasheet PDF provide the EFM32TG822F16-D-QFP48 documentation. The family datasheet covers the EFM32TG822 device configuration, electrical characteristics, pin descriptions, memory map, and peripheral operation. Use the exact ordering code and package variant when reviewing revision-dependent information.
Where can I find the EFM32TG822F16-D-QFP48 pinout?
The EFM32TG822F16-D-QFP48 pinout is published in the manufacturer datasheet as a 48-pin TQFP pin-description table and package drawing. The device exposes 37 digital I/O pins, with remaining pins assigned to supply, ground, clock, reset, programming, and other fixed functions. Use that table rather than generic QFP numbering conventions.
Is the EFM32TG822F16-D-QFP48 suitable for low-power applications?
Yes, the EFM32TG822F16-D-QFP48 is suitable for low-power embedded applications. Silicon Labs highlights innovative low-energy techniques, fast wake-up times, and energy-saving modes as platform features. These characteristics help reduce duty-cycle energy use in battery-operated sensors and wake-on-event controllers when firmware keeps unused peripherals disabled.
What are the key specifications of the EFM32TG822F16-D-QFP48 that engineers should know?
The EFM32TG822F16-D-QFP48 combines an ARM Cortex-M3 core, 32 MHz operating speed, 16 kB Flash, 4 kB RAM, 37 digital I/O pins, and two 16-bit timers in a 48-TQFP package. Its 1.98 V to 3.8 V supply range and low-energy operating modes make it suited to compact, event-driven control and sensing products.
Can the EFM32TG822F32-QFP48 replace the EFM32TG822F16-D-QFP48?
The EFM32TG822F32-QFP48 is the closest same-family option because it retains the 32 MHz Cortex-M3 core, 4 kB RAM, 37 digital I/O pins, two 16-bit timers, and 48-TQFP footprint while increasing Flash from 16 kB to 32 kB. Confirm the exact suffix, pin mapping, and operating-temperature grade before treating it as a drop-in replacement.
What can replace the EFM32TG822F16-D-QFP48 on the same PCB?
The EFM32TG822F32-QFP48 is a practical same-family replacement when the original 16 kB Flash budget is too small. Same-package EFM32TG822 variants are preferred because changing Cortex-M3 peripherals, memory size, or package details can alter firmware and board requirements. Verify pin compatibility and device-specific configuration in the manufacturer documentation.
When should I choose the EFM32TG822F16-D-QFP48 over a higher-memory EFM32TG822 variant?
Choose the EFM32TG822F16-D-QFP48 when firmware comfortably fits 16 kB of Flash and the 4 kB RAM is sufficient for the application. A 32 kB Flash variant provides more code space but does not expand RAM. Select the larger Flash device when protocol libraries, logging, or update mechanisms would exceed the smaller firmware budget.
Is the EFM32TG822F16-D-QFP48 suitable for motor control and industrial embedded systems?
The EFM32TG822F16-D-QFP48 is suitable for compact industrial embedded control, including motor-control-oriented designs that fit its two 16-bit timers and 37 available I/O pins. The -40 °C to +85 °C operating range supports industrial environments. Confirm timer PWM channels, pin multiplexing, drive capability, and motor-driver requirements in the datasheet.
How does the EFM32TG822F16-D-QFP48 compare with the EFM32TG822F16-QFP48T?
Both listings identify a 48-TQFP, 32 MHz Cortex-M3 device with 16 kB Flash and the same EFM32TG822F16 device base. The ordering suffixes identify different packing or temperature-market variants rather than different core specifications. Confirm the exact suffix in purchasing and incoming-inspection documentation because suffix handling can vary by distributor.
What is the best Silicon Labs equivalent for the EFM32TG822F16-D-QFP48?
The best same-manufacturer equivalent is the EFM32TG822F32-QFP48 when additional Flash is beneficial, because it keeps the EFM32TG822 platform, 32 MHz Cortex-M3 core, 4 kB RAM, 37 digital I/O pins, two 16-bit timers, and 48-TQFP package. Review the exact suffix and pin table before converting an existing design.
Where can I buy the EFM32TG822F16-D-QFP48 and check its lead time?
Use the Request a Quote form on this page to request the current unit price, stock status, minimum order quantity, and lead time for the EFM32TG822F16-D-QFP48. Commercial terms can change with availability and purchasing volume, so obtain a current quotation for production planning rather than relying on a historical catalog figure.

Impormasyon ng Talumpati sa Engineering for EFM32TG822F16-D-QFP48 — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.

Paunawang Hanapin

Choose the EFM32TG822F16-D-QFP48 when a compact 32-bit control design fits within 16 kB of Flash and 4 kB of RAM, particularly for low-power sensing, industrial control, or building-automation nodes. Choose the EFM32TG822F32-QFP48 or EFM32TG822F32-D-QFP48 when protocol libraries, firmware updates, or control algorithms need more code space while the 4 kB RAM limit remains acceptable. Use the EFM32TG822F16-QFP48 or EFM32TG822F16-QFP48T only after confirming the suffix's packing and market designation for your procurement and production process. The 8 kB Flash EFM32TG822F8-D-QFP48 is appropriate only for very compact firmware and offers less margin for revisions or field updates. In every case, verify the exact pin table, temperature grade, peripheral multiplexing, and package drawing before treating a variant as a drop-in substitution.

Ikabit sa Mga Alternatibo

Parametro Ito ang Producto EFM32TG822F32-QFP48 EFM32TG822F16-QFP48 EFM32TG822F16-QFP48T EFM32TG822F8-D-QFP48 EFM32TG822F32-D-QFP48
Brand Silicon Labs Silicon Labs Silicon Labs Silicon Labs Silicon Labs Silicon Labs
Package 48-TQFP (7 x 7 mm) 48-TQFP (7 x 7 mm) - same 48-TQFP (7 x 7 mm) - same 48-TQFP (7 x 7 mm) - same 48-TQFP (7 x 7 mm) - same 48-TQFP (7 x 7 mm) - same
Flash Memory 16 kB 32 kB 16 kB 16 kB 8 kB 32 kB

Pangunahing mga Pagkakaiba

  • Balanced memory configuration for compact control firmware (kumpara saEFM32TG822F32-QFP48)
  • Matches the core resource profile of the higher-Flash family member (kumpara saEFM32TG822F32-D-QFP48)
  • Provides twice the Flash of the smallest same-footprint option (kumpara saEFM32TG822F8-D-QFP48)

Talaan ng Disenyo

Design the supply for the stated 1.98 V to 3.8 V operating range and place the recommended input and output decoupling capacitors close to their designated pins. Keep analog, sensor, and communications supply branches separate from noisy actuator branches where possible. Review peripheral current requirements at the operating temperature because the MCU core, communications blocks, and external loads contribute different current levels. Enable only the peripherals required by the active power mode.

Route the 48-pin TQFP using the manufacturer pin-description table rather than assuming a generic numbering arrangement. Keep the exposed perimeter pads clear of plated-through-hole and copper features that could interfere with soldering or rework. Provide a dedicated programming interface, test points for supply, reset, and clock signals, and maintain short return paths for high-frequency or sensitive analog inputs.

Do not select this device solely by its 32 MHz clock rating. Its 16 kB Flash partition is the main firmware constraint, while 4 kB RAM must accommodate the stack, interrupt context, buffers, and application data. Link the final build early, reserve any required bootloader or recovery region, and verify that peripheral pin multiplexing does not conflict with externally connected signals. Validate suffix-specific temperature and packing requirements before ordering.

Estimated firmware power optimization: current consumption depends on clock frequency, active peripherals, operating mode, and supply voltage, so it cannot be derived from the processor speed alone. Measure the assembled product across sleep, active-idle, and workload states, then confirm that the regulator, battery, and external circuitry support the measured peak and average demand. Avoid extrapolating battery life from an idle operating-mode figure.

Impormasyon ng Pagsunod sa Kautusan

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Walang Lead
Unknown
Walang Halogen
Unknown
Mga Conflict Mineral
Unknown

RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals declarations were not established by the cited manufacturer and distributor pages. The listed operating temperature is -40 °C to +85 °C, but temperature rating alone does not establish automotive qualification.

Data napatotohanan sa: 2026-11-19 — impormasyon na pinatunayan at pinapatakbo ng pangkat ng engineering ng XAIPART's component engineering team

Kaugnay na Hanapin

EFM32TG822F16-D-QFP48 datasheet EFM32TG822F16-D-QFP48 datasheet pdf EFM32TG822F16-D-QFP48 pinout EFM32TG822F16-D-QFP48 specifications EFM32TG822F16-D-QFP48 price EFM32TG822F16-D-QFP48 stock EFM32TG822F16-D-QFP48 equivalent EFM32TG822F16-D-QFP48 replacement EFM32TG822F16-D-QFP48 vs EFM32TG822F32-QFP48 Silicon Labs EFM32TG822F16-D-QFP48 EFM32TG822 48-TQFP pinout EFM32TG822F16 low power application

Mga kaugnay na Mga Komponente at mga Tuntunin

Silicon Labs EFM32TG822F16-D-QFP48 EFM32TG822F32-QFP48 EFM32TG822F16-QFP48 EFM32TG822F16-QFP48T EFM32TG822F8-D-QFP48 EFM32TG822F32-D-QFP48 ARM Cortex-M3 EFM32 Tiny Gecko 32-bit microcontroller embedded microcontroller semiconductor TQFP-48 surface-mount package 16 kB Flash 4 kB RAM digital I/O 16-bit timer low-power mode fast wake-up industrial control building automation environmental sensing motor control
Mabilis na Tanggap na RFQ
Ihanda ang buong detalye — ang aming pangkalakal na koponan ay tutugon sa loob ng 24 oras
Numero ng Parte Mga Tagagawa Pakete QTY Target na Halaga Pinalawak
✓
Quote na inilabas!

Ating tumugon sa iyong email sa loob ng 24 oras

1
RFQ Naisumite
2
Received na ang Kwaliksik
3
Nai-order
4
Pagbabayad
5
Inihanda
6
Naihanda
Tingnan ang Detalye ng RFQ