EP2S130F1508C3N - Stratix II 132K LE FPGA 1508-FCBGA | Intel
Артикул: EP2S130F1508C3N ✗ Снят с производства| Кол-во | Цена за ед. | Итого |
|---|---|---|
| 1 | $385 | $385,00 |
| 10 | $350 | $3.500,00 |
| 25 | $325 | $8.125,00 |
| 100 | $295 | $29.500,00 |
| 500 | $270 | $135.000,00 |
EP2S130F1508C3N Обзор
What is an FPGA? A Field Programmable Gate Array (FPGA) is a type of programmable logic device (PLD) that allows engineers to configure digital logic blocks and interconnect them after manufacturing. FPGAs sit in the broader hierarchy of programmable logic devices (PLDs) → FPGAs → high-density FPGAs → ASIC prototyping platforms → semiconductor ICs. They are widely used for parallel processing, hardware acceleration, DSP, and interface bridging where fixed-function ASICs are too costly or inflexible.
Key features include 132,540 logic elements (LEs), 6,747,840 bits of on-chip RAM (M4K/M-RAM blocks), 252 embedded 18x18 multipliers for DSP, up to 12 high-speed transceivers (1.25 Gbps per channel, depending on variant), and a DDR/SDR/DDR2 memory interface support via dedicated PHY. The 1508-ball FCBGA package provides high pin density for I/O-rich designs and supports multi-gigabit signaling. The device also includes embedded PLL blocks (up to 12) for clock management and skew control.
The Stratix II EP2S130 architecture replaces the classic 4-input LUT with the 8-input ALM (Adaptive Logic Module), enabling wider combinational logic per slice and roughly doubling logic density per LAB versus the original Stratix family. Internal M-RAM blocks (512 Kbit each) provide bulk on-chip memory suitable for packet buffering and lookup tables, while the column-based DSP block layout simplifies floorplanning for DSP-heavy designs. The device operates from multiple on-chip voltage rails (core VCC, VCCL, VCCPD, VCCA) and requires a structured power-on sequencing scheme.
Typical applications include high-throughput data acquisition, ASIC prototyping, telecom baseband processing, high-end video broadcast, radar/signal-intelligence front-ends, and PCIe/serial RapidIO bridge cards. The dense logic and high I/O count make it well suited to multi-channel processing where multiple DSP data paths must be implemented in parallel on a single device. The C3 speed grade is the slowest commercial speed grade, which is usually adequate for ASIC prototyping and non-timing-critical logic consolidation.
When designing with the EP2S130F1508C3N, ensure all four supply rails are properly decoupled with low-ESR ceramics near each ball cluster, and respect the Stratix II power-on sequencing specification (VCCINT → VCCPD → VCCA → VCCIO). Designers migrating from first-generation Stratix (EP1S) should fully re-validate timing, as the ALM architecture and timing models differ. Quartus II (legacy) is the supported design tool chain.
This page synthesizes distributor pricing, drop-in same-family alternatives, and practical Stratix II design considerations beyond what is found in the datasheet alone.
Аналоги без доработки для EP2S130F1508C3N — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.
Варианты в этой серии
Модели той же серии, совместимые без доработки с EP2S130F1508C3N (тот же форм-фактор и посадочное место) — отличается по Package, Speed Grade, Operating Temperature, Mounting Type, Process Technology.
Инструмент быстрого сравнения — выберите альтернативные компоненты для сравнения бок о бок:
EP2S130F1508C3
✅ Прямая замена✓ В наличии
$1350 / шт.
Открыть даташит →EP2S130F1508C5N
✅ Прямая замена✓ В наличии
$1390 / шт.
Открыть даташит →EP2S130F1508C7N
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
EP2S130F1508I4N
✅ Прямая замена✓ В наличии
$1390 / шт.
Открыть даташит →EP2S130F1508C3ES
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
EP2S130F1508C3N Максимальные параметры и электрические характеристики
| Family | Stratix II |
| Device | EP2S130 |
| Logic Elements (LEs) | 132,540 |
| LABs/CLBs | 6,627 |
| Total RAM Bits | 6,747,840 |
| Embedded Memory | M4K + M-RAM blocks |
| Number of I/O | 1,126 |
| Number of Logic Elements/Cells | 132,540 |
| Тип монтажа | Surface Mount |
| Рабочая температура | 0C to +85C (commercial) |
| Корпус | 1508-FCBGA |
| Speed Grade | C3 |
| Process Node | 90 nm |
Руководство по цоколевке EP2S130F1508C3N в корпусе 1508-fcbga
Цоколевка для EP2S130F1508C3N (корпус 1508-fcbga). Эта цифровая ИС включает выводы GPIO, интерфейсы связи (UART, SPI, I2C) и выводы питания. Обратитесь к техническому описанию производителя для альтернативных функций выводов и вариантов конфигурации. Необходимо для проектирования встраиваемых систем и трассировки печатных плат.
Нет подробных данных о распиновке для EP2S130F1508C3N.
Обратитесь к даташиту для полной конфигурации выводов.
Типичное применение
EP2S130F1508C3N подходит для 6 применениеs: ASIC Prototyping and Emulation, High-Throughput Data Acquisition, Telecom Baseband Signal Processing, High-End Video Broadcast Processing, Radar and Signal-Intelligence Front-End, Industrial Control and Machine Vision.
ASIC Prototyping and Emulation
The EP2S130F1508C3N's 132,540 logic elements and 6,747,840 bits of embedded memory (M4K + M-RAM blocks) make it a strong fit for ASIC prototyping and multi-block RTL emulation. Designers partition an ASIC's RTL into the FPGA's ALM-based fabric, using the device's high Logic Element (LE) count to absorb tens of millions of gates of pre-silicon verification. With 1,126 user I/Os, the EP2S130 can interface to real-world ASIC pads via speed-bridge daughter boards, supporting pre-silicon validation of complex SoC designs. Quartus II synthesis and incremental compilation shorten iteration cycles. Source: Stratix II handbook SII51002.
Рекомендуется
High-Throughput Data Acquisition
For data-acquisition systems sampling multiple analog input channels simultaneously, the EP2S130F1508C3N provides 252 embedded 18x18 multipliers and 6,747,840 bits of on-chip RAM, enabling FIR filtering, FFT processing, and on-chip buffering without off-chip memory accesses. The 1,126 user I/Os allow parallel interface to multiple high-speed ADCs (LVDS/LVCMOS), and the dedicated PLL blocks (up to 12) provide low-jitter sampling clocks. Estimated throughput: a fully pipelined 256-tap FIR at 250 MHz is achievable within the EP2S130's DSP resource budget. Source: Stratix II DSP block reference.
Рекомендуется
Telecom Baseband Signal Processing
Stratix II devices were widely adopted in WCDMA/HSPA/early LTE baseband cards. The EP2S130F1508C3N's 252 18x18 multipliers and 6.7 Mbit embedded RAM support multi-channel rake receivers, chip-rate processing, and turbo-decoder accelerators, while the high-I/O FCBGA package enables CPRI/OBSAI fronthaul interconnect. The 1.25 Gbps transceivers (where populated) handle serial RapidIO or Aurora links between FPGAs and DSP processors. The C3 speed grade is acceptable for baseband work, which is typically not the most timing-critical subsystem.
Рекомендуется
High-End Video Broadcast Processing
Studio-grade video routers, multi-format format converters, and uncompressed 4:4:4 video processing pipelines benefit from the EP2S130F1508C3N's 1,126 I/Os (which can drive parallel BT.1120 / SDI / DisplayPort interfaces) and 6,747,840 bits of embedded RAM for line and frame buffers. The DSP blocks accelerate chroma upsampling, color-space conversion, and real-time scaling. Designers typically instantiate multiple SDI/HDMI receivers and route pixels through the FPGA fabric with deterministic low-latency paths. Estimated line-buffer size at 1080p60: 1920*4 = 7.5 Kbit per line - easily fitting in M4K blocks.
Рекомендуется
Radar and Signal-Intelligence Front-End
The EP2S130F1508C3N's combination of high-density logic, 252 multipliers, and embedded M-RAM bulk memory is well-suited to radar pulse compression, beamforming pre-processing, and electronic-warfare channelization. The 1,126 user I/Os accept multi-channel LVDS A/D data streams (e.g., from a bank of 14-bit ADCs at 250 MSPS), while the embedded DSP blocks execute FFTs and matched filters in real time. Industrial-grade variant EP2S130F1508I4N is preferred for fielded radar/EW hardware. Source: Stratix II DSP and memory white papers.
Рекомендуется
Industrial Control and Machine Vision
Machine-vision inspection systems and high-channel-count industrial controllers leverage the EP2S130F1508C3N for parallel image processing (Sobel, morphology, blob analysis) and deterministic I/O handling. The 1,126 I/Os accommodate multi-camera LVDS interfaces, encoder counters, and high-speed fieldbus (EtherCAT, PROFINET) MACs in soft logic. The 90 nm Stratix II process is robust for industrial environments, and the commercial 0C-to-85C range is sufficient for enclosed cabinet installations. Source: Altera industrial reference designs.
Рекомендуется
Сводка рекомендуемых товаров
Справочные инженерные данные для EP2S130F1508C3N — сравнение, рекомендации по проектированию и информация о соответствии.
Руководство по выбору
Сравнение с аналогами
| Параметр | Этот товар | EP2S130F1508C3 | EP2S130F1508C5N | EP2S130F1508C7N | EP2S130F1508I4N | EP2S130F1508C3ES |
|---|---|---|---|---|---|---|
| Brand | Intel (Altera) | Intel (Altera) | Intel (Altera) | Intel (Altera) | Intel (Altera) | Intel (Altera) |
| Package | 1508-FCBGA | 1508-FCBGA - same | 1508-FCBGA - same | 1508-FCBGA - same | 1508-FCBGA - same | 1508-FCBGA - same |
| Logic Elements | 132,540 LEs | 132,540 LEs | 132,540 LEs | 132,540 LEs | 132,540 LEs | 132,540 LEs |
| Embedded RAM | 6,747,840 bits | 6,747,840 bits | 6,747,840 bits | 6,747,840 bits | 6,747,840 bits | 6,747,840 bits |
| User I/Os | 1,126 | 1,126 | 1,126 | 1,126 | 1,126 | 1,126 |
| Speed Grade | C3 (commercial, slowest) | C3 | C5 (faster) | C7 | I4 (industrial) | C3 (engineering sample) |
| Temperature Range | 0C to +85C (commercial) | 0C to +85C | 0C to +85C | 0C to +85C | -40C to +100C (industrial) | 0C to +85C |
| Terminal Finish | Lead-free (N suffix, RoHS) | SnPb (non-RoHS) | Lead-free | Lead-free | Lead-free | Lead-free (engineering sample) |
| Lifecycle | Obsolete (EOL) | Obsolete | Obsolete | Obsolete | Obsolete | Obsolete (ES) |
Ключевые отличия
- Lead-free / RoHS terminal finish (против EP2S130F1508C3)
- Commercial temperature range vs industrial (против EP2S130F1508I4N)
- Slowest commercial speed grade - lower dynamic power (против EP2S130F1508C5N)
- Highest-density Stratix II in 1508-ball FCBGA (против EP2S90F1508C3N)
Заметки по проектированию
The EP2S130F1508C3N requires four independent supply rails: VCCINT (core, typically 1.2V), VCCPD (I/O pre-driver, 2.5V or 3.0V), VCCA (PLL analog, 2.5V), and VCCIO (bank I/O, 1.2V-3.3V depending on I/O standard). Altera specifies a strict power-on sequence: VCCINT first, then VCCPD, then VCCA, then VCCIO. Reverse sequencing or simultaneous ramp-up can permanently damage the device. Estimated: total core current at 100% toggle on 132K LEs is 1-2 A; pair a 4-layer PCB with low-ESR ceramic decoupling per Altera's pin connection guidelines.
Estimated: at full utilization (132K LEs, 252 DSP blocks, 6.7 Mbit RAM, ~50% toggle rate) the EP2S130F1508C3N can dissipate 8-12 W. The 1508-ball FCBGA package requires thermal vias under the central die region (per Altera AN 484). Without a thermal via array or heatsink, junction temperature can exceed 100C and trigger thermal-sensor-based throttling. Industrial variant EP2S130F1508I4N tolerates 100C junction vs 85C for the commercial part.
Stratix II 1508-ball FCBGA requires 1.0 mm or 1.27 mm ball pitch with controlled-impedance routing for high-speed I/O and transceiver channels. Pair 0.1 uF decoupling within 100 mil of each VCCIO/VCCPD ball, and use power planes (not traces) for VCCINT and GND. Route all differential pairs with matched length (within 50 mil) and 100 ohm differential impedance. Source: Altera AN 484 (Stratix II Hardware Design Guide).
Do not assume EP2S130F1508C3 and EP2S130F1508C3N are fully interchangeable without checking your application's RoHS requirement: the non-N variant uses SnPb finish and is non-RoHS. Do not confuse 'C3' speed grade with 'C8' or 'I8' - the digits encode both speed and temperature. The 1508-FCBGA ball map is package-specific; do not assume pin compatibility with other Stratix II packages (e.g. 1020-FBGA).
Информация о соответствии
N suffix denotes lead-free / RoHS-compliant terminal finish per Altera legacy product numbering. AEC-Q100 not applicable for FPGAs. REACH, halogen-free, and conflict-minerals status not stated in the verified datasheet excerpt; confirm via Intel product declaration request before automotive/medical use.
