EP4CGX22BF14I7 - Cyclone IV GX FPGA, 22K LEs, 169-LBGA | Intel
Артикул: EP4CGX22BF14I7 ✓ Активен| Кол-во | Цена за ед. | Итого |
|---|---|---|
| 1 | $56.92 | $56,92 |
| 10 | $51.84 | $518,40 |
| 100 | $47.5 | $4.750,00 |
| 500 | $43.1 | $21.550,00 |
| 1.000 | $39.75 | $39.750,00 |
EP4CGX22BF14I7 Обзор
An FPGA (Field-Programmable Gate Array) is a programmable logic device (PLD) that allows designers to configure digital logic blocks, interconnect, and I/O after manufacture. FPGAs sit in the programmable logic hierarchy above microcontrollers and below ASICs in cost-efficiency for low-to-medium volumes, combining parallel processing, reconfigurable fabric, and high-speed serial transceivers. The Cyclone IV GX family targets cost-sensitive applications that still need transceivers for protocols such as PCIe Gen1, Gigabit Ethernet, CPRI, and SMPTE 3G-SDI.
Key features of the EP4CGX22BF14I7 include 21,280 logic elements, 66 18x18 multipliers, 77.4 Kbits of M9K block RAM plus 242 Kbits of MLAB distributed RAM, two PLLs, two 3.125 Gbps transceiver channels, and 72 user I/O pins. The device operates from a 1.2 V core supply with LVDS, LVTTL, LVCMOS, and SSTL/HSTL I/O standards supported. The -I7 speed grade denotes the industrial temperature range -40C to +100C (junction) with a specific timing closure tier.
Architecturally, the Cyclone IV GX uses a low-power 60-nm process (Cyclone IV device family), an embedded transceiver block per row of high-speed serial links, and hard memory blocks for efficient on-chip storage. The part supports configuration via JTAG, Active Serial (AS), Passive Serial (PS), and Fast Passive Parallel (FPP) modes.
Typical applications include industrial control interfaces, low-cost serial-protocol bridging (PCIe Gen1 endpoints, GbE MACs, CPRI for small-cell base stations), video broadcast bridging for SDI/HDMI conversion, motor control co-processors, and FPGA-based I/O expansion for embedded SoCs. The integrated transceivers eliminate the need for external PHY ICs in many designs, reducing BOM and board area.
When designing with this device, ensure the Quartus II / Quartus Prime design toolchain supports the targeted Cyclone IV GX device variant, and verify that the -I7 speed grade timing closure matches the target fMAX. Decoupling capacitors must be placed close to all VCCINT, VCCA, VCCIO, and transceiver supply pins per Intel's Cyclone IV GX hardware reference design guidelines.
This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone - useful for engineers evaluating Cyclone IV GX variants for new designs or migration paths.
Аналоги без доработки для EP4CGX22BF14I7 — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.
Варианты в этой серии
Модели той же серии, совместимые без доработки с EP4CGX22BF14I7 (тот же форм-фактор и посадочное место) — отличается по Package, Operating Temperature, Speed Grade, Process Technology, Transceivers.
Инструмент быстрого сравнения — выберите альтернативные компоненты для сравнения бок о бок:
EP4CGX22BF14C8N
✅ Прямая замена✓ В наличии
$19.75 / шт.
Открыть даташит →EP4CGX22BF14C7N
✅ Прямая замена✓ В наличии
$39.48 / шт.
Открыть даташит →EP4CGX22BF14C7
✅ Прямая замена✓ В наличии
$23.6 / шт.
Открыть даташит →EP4CGX22BF14C8
✅ Прямая замена✓ В наличии
$24.2 / шт.
Открыть даташит →EP4CGX22BF14C6N
✅ Прямая замена✓ В наличии
$42.14 / шт.
Открыть даташит →EP4CGX22BF14C6
✅ Прямая замена✓ В наличии
$17.9 / шт.
Открыть даташит →EP4CGX22BF14I7 Максимальные параметры и электрические характеристики
| Series | Cyclone IV GX |
| Logic Elements | 21,280 |
| Total Block Memory Bits | 774,144 |
| Total RAM Bits | 21,280 (M9K + MLAB) |
| Number of LABs/CLBs | 47 |
| Number of Logic Elements/Cells | 21,280 |
| Number of I/O | 72 |
| Voltage - Supply | 1.2 V core |
| Тип монтажа | Surface Mount |
| Корпус | 169-LBGA (FBGA-169) |
Руководство по цоколевке EP4CGX22BF14I7 в корпусе 169-lbga (fbga-169)
Цоколевка для EP4CGX22BF14I7 (корпус 169-lbga (fbga-169)). Эта цифровая ИС включает выводы GPIO, интерфейсы связи (UART, SPI, I2C) и выводы питания. Обратитесь к техническому описанию производителя для альтернативных функций выводов и вариантов конфигурации. Необходимо для проектирования встраиваемых систем и трассировки печатных плат.
Нет подробных данных о распиновке для EP4CGX22BF14I7.
Обратитесь к даташиту для полной конфигурации выводов.
Типичное применение
EP4CGX22BF14I7 подходит для 7 применениеs: Industrial PCIe Gen1 Endpoint Bridge, Gigabit Ethernet MAC with Industrial Protocol Bridging, Broadcast Video SDI/HDMI Conversion Bridge, Multi-Axis Motor Control Co-Processor, Small-Cell Base Station CPRI Interface, FPGA-Based I/O Expansion for Embedded SoCs, Test & Measurement Protocol Analyzer Probe.
Industrial PCIe Gen1 Endpoint Bridge
The EP4CGX22BF14I7 fits PCIe Gen1 endpoint designs thanks to its 2 integrated 3.125 Gbps transceivers and 169-LBGA footprint. With 21,280 LEs and 66 18x18 multipliers, the part handles PCIe transaction layer, DMA engine, and protocol bridging to local buses (PCIe-to-LocalBus / PCIe-to-EMIF) without external PHY. Its industrial -40C to +100C temperature grade enables deployment in factory automation controllers and machine vision systems where commercial-grade FPGAs are unsuitable. Power consumption is typically under 1.5W at full transceiver utilization, well within passive cooling budgets.
Рекомендуется
Gigabit Ethernet MAC with Industrial Protocol Bridging
The EP4CGX22BF14I7 supports single-port Gigabit Ethernet MAC implementations using its integrated transceivers and 774,144 bits of block RAM for packet buffering. With 21,280 LEs and 2 PLLs, the FPGA can implement GbE MAC plus industrial protocol bridges (PROFINET, EtherCAT, Modbus TCP) for industrial gateway equipment. The 169-LBGA industrial-grade package suits factory-floor installations with extended temperature ranges. Designers typically pair it with an external PHY or use the on-chip SERDES for 1000BASE-T/SGMII links.
Рекомендуется
Broadcast Video SDI/HDMI Conversion Bridge
The EP4CGX22BF14I7 is widely used in 3G-SDI to HDMI conversion bridges for broadcast production equipment, leveraging its 2 transceivers for SDI receive/transmit and LVDS I/O for HDMI. With 21,280 LEs and 66 multipliers, the part supports SDI de/embedder logic plus color-space conversion and scaling. The industrial -I7 grade suits broadcast studios and outdoor OB vans. The 169-LBGA package fits compact mezzanine modules that convert between professional video formats in camera control units and production switchers.
Рекомендуется
Multi-Axis Motor Control Co-Processor
Industrial motor drives benefit from the EP4CGX22BF14I7's 66 18x18 multipliers and 21,280 LEs, which can implement multi-axis field-oriented control (FOC) loops, encoder interfaces (EnDat 2.2, BISS, SSI), and isolated comm channels. The 2 PLLs generate timing for multiple encoder sampling rates, while the 72 user I/Os interface to power-stage gate drivers and resolver excitation circuits. The industrial -I7 grade and 169-LBGA package suit servo drives and robotics controllers operating in harsh factory environments.
Рекомендуется
Small-Cell Base Station CPRI Interface
The EP4CGX22BF14I7's integrated transceivers support CPRI links up to 3.125 Gbps for small-cell base station baseband-to-radio bridging. With 21,280 LEs and 774,144 memory bits, the FPGA can implement CPRI framing, AXI/Stream fabric interfacing, and basic PHY-layer DSP. The industrial temperature grade enables outdoor small-cell deployment. The 169-LBGA footprint allows compact radio unit (RU) designs where board area is at premium and external PHY ICs cannot be used.
Рекомендуется
FPGA-Based I/O Expansion for Embedded SoCs
The EP4CGX22BF14I7 serves as an FPGA I/O expander for ARM-based SoCs lacking sufficient GPIO, serial interfaces, or specialized logic. With 72 user I/Os and 21,280 LEs, it adds PCIe endpoint, LVDS, LVCMOS, and custom interfaces to processors lacking these peripherals. The 2 PLLs derive multiple domain clocks for downstream devices. The industrial -I7 grade suits embedded industrial PCs and edge-compute gateways. The 169-LBGA package fits standard mezzanine footprints used in COM Express carrier boards.
Рекомендуется
Test & Measurement Protocol Analyzer Probe
The EP4CGX22BF14I7 supports portable protocol analyzers for PCIe Gen1, GbE, and custom serial protocols thanks to its 2 transceivers and 21,280 LEs. With 774,144 bits of block RAM, the part can buffer captured frames for analysis. The industrial -I7 grade enables field-deployed test equipment. The 169-LBGA package suits compact handheld probe form factors. Designers can reconfigure the FPGA to support multiple protocols via JTAG, making it a flexible multi-standard bench tool.
Рекомендуется
Сводка рекомендуемых товаров
Справочные инженерные данные для EP4CGX22BF14I7 — сравнение, рекомендации по проектированию и информация о соответствии.
Руководство по выбору
Сравнение с аналогами
| Параметр | Этот товар | EP4CGX22BF14C8N | EP4CGX22BF14C7N | EP4CGX22BF14C7 | EP4CGX22BF14C8 | EP4CGX22BF14C6N |
|---|---|---|---|---|---|---|
| Brand | Intel | Intel | Intel | Intel | Intel | Intel |
| Package | 169-LBGA | 169-LBGA - same | 169-LBGA - same | 169-LBGA - same | 169-LBGA - same | 169-LBGA - same |
| Logic Elements | 21,280 | 21,280 | 21,280 | 21,280 | 21,280 | 21,280 |
| Total Memory Bits | 774,144 | 774,144 | 774,144 | 774,144 | 774,144 | 774,144 |
| Temperature Grade | Industrial (-40C to +100C) | Commercial (0C to +85C) | Commercial (0C to +85C) | Commercial (0C to +85C) | Commercial (0C to +85C) | Commercial (0C to +85C) |
| Speed Grade | I7 (industrial mid-speed) | C8 (commercial mid-speed) | C7 (commercial mid-speed) | C7 (commercial mid-speed) | C8 (commercial mid-speed) | C6 (commercial slowest) |
| Number of Transceivers | 2 (up to 3.125 Gbps) | 2 (up to 3.125 Gbps) | 2 (up to 3.125 Gbps) | 2 (up to 3.125 Gbps) | 2 (up to 3.125 Gbps) | 2 (up to 3.125 Gbps) |
| User I/O | 72 | 72 | 72 | 72 | 72 | 72 |
| Core Voltage | 1.2 V | 1.2 V | 1.2 V | 1.2 V | 1.2 V | 1.2 V |
| Lead-Free (N suffix) | No (I7 only) | Yes | Yes | No | No | Yes |
Ключевые отличия
- Industrial temperature grade in 169-LBGA with integrated 3.125 Gbps transceivers (против EP4CGX22BF14C8N)
- Higher speed grade (I7) for industrial timing closure (против EP4CGX22BF14C6N)
- Two integrated 3.125 Gbps transceivers eliminate external PHY ICs (против EP4CE40F23I7N (Cyclone IV E, no transceivers))
Заметки по проектированию
The EP4CGX22BF14I7 requires multiple supply rails: 1.2 V VCCINT (core), 2.5 V or 3.3 V VCCIO (I/O banks), 2.5 V VCCA (PLL analog), and 1.2 V/2.5 V VCCD_PLL (PLL digital). According to Intel's Cyclone IV GX hardware reference design guidelines, decouple each VCCINT pin with 0.1 uF and 10 uF capacitors placed within 100 mils of the respective pins. Transceiver channels require VCCR, VCCT, and VCCH supplies with dedicated filtering; sharing these with digital supplies will degrade SERDES jitter performance.
The 169-LBGA package has a theta-JA of approximately 25 C/W with proper PCB thermal via array. Estimated: at 1.5 W total power dissipation, junction temperature rise above ambient is ~37C, keeping the part within the -40C to +100C industrial range. Use at least a 4-layer PCB with continuous ground plane beneath the BGA and thermal via array (0.3 mm pitch, 0.2 mm drill) for adequate heat spreading in high-utilization designs.
The 169-LBGA uses a 1.0 mm ball pitch, which requires NSMD (non-solder-mask-defined) pads per Intel's design guidelines. Maintain at least 0.5 mm clearance from BGA edge to nearest trace and route all signals on outer layers only for breakout. For transceiver channels, maintain 100-ohm differential impedance on the SERDES lanes with length matching to within 150 mils for 3.125 Gbps operation.
Do not assume the EP4CGX22BF14I7 and EP4CGX22BF14C8N are interchangeable in industrial designs - the C8N suffix denotes commercial temperature grade (0C to +85C). Verify the temperature range of your enclosure against the device's TJ range, and consider that BGA packages develop higher junction temperatures than QFP due to limited board-side cooling paths. For JTAG programming, ensure the nCONFIG pin is pulled high via 10 kohm to VCCIO before applying power.
Place the configuration EEPROM (EPCS device for Active Serial mode) within 2 inches of the FPGA's MSEL/ASDO/nCSO pins. According to Intel's Cyclone IV GX handbook, route clock inputs (CLK0-CLK3) on inner layers with ground reference for best jitter performance, and avoid routing them parallel to high-speed transceiver lanes. The two PLLs benefit from isolated power filtering; do not share their VCCA planes with noisy switching converters.
Информация о соответствии
RoHS and REACH compliance not directly listed in the verified web data; consult the official Intel product declaration. AEC-Q100 not applicable - this is an FPGA, not an automotive-grade qualified IC. Contact Intel for automotive-grade equivalents.
