Altera

EPF6024AQI208-2N - FLEX 6000 24K Gate FPGA, PQFP-208 | Altera

Артикул: EPF6024AQI208-2N ✗ Снят с производства

В наличии Отправка в течение 1–3 рабочих дней

3.3 V Vdss 208-pin PQFP (Plastic Quad Flat Pack), 0.5 mm pitch Package 153 MHz Speed

От $54 USD / шт.

MOQ: 1 |

Цена обновлена: 2026-09-11

Оптовые цены

Кол-во	Цена за ед.	Итого
1	$95	$95,00
10	$85	$850,00
100	$72	$7.200,00
500	$62.5	$31.250,00
1.000	$54	$54.000,00

ℹ️ Все цены указаны в USD

Открыть datasheet (PDF) Смотреть аналоги

Количество

EPF6024AQI208-2N Обзор

The Altera EPF6024AQI208-2N is a member of the FLEX 6000 family of CMOS SRAM-based programmable logic devices (PLDs), featuring 24,000 typical gates, 1,960 logic elements, and 171 user I/O pins in a 208-pin Plastic Quad Flat Pack (PQFP) package. Per the Altera FLEX 6000 datasheet, the device operates from a 3.3 V core supply with a maximum clock frequency of 153 MHz, and uses SRAM configuration cells that must be loaded at every power-up from an external serial or parallel memory device.

A FLEX 6000 device is a fine-grained reprogrammable logic IC that sits between a complex programmable logic device (CPLD) and a high-density field-programmable gate array (FPGA) in the broader programmable logic hierarchy (CPLD -> FLEX 6000 -> FPGA -> SoC FPGA). The FLEX 6000 family was Altera's first Optically reprogrammable, low-cost, SRAM-based FPGA line optimized for high I/O count glue logic and data-path applications. Compared with CPLDs, the FLEX 6000 offers higher register density and richer routing; compared with modern FPGAs, it provides simpler development but lower logic capacity.

The EPF6024AQI208-2N delivers 171 configurable I/O lines plus 4 dedicated inputs, supporting a wide range of I/O standards including 3.3 V LVCMOS/LVTTL on the I/O banks. The maximum toggle performance of 153 MHz makes it suitable for mid-speed peripheral controllers, bus bridges, and state-machine replacement. Its high I/O count relative to its logic capacity makes it ideal for I/O-intensive glue-logic designs rather than DSP-heavy workloads.

Internally, the FLEX 6000 architecture combines Look-Up Tables (LUTs) for combinational logic with dedicated register cells, interconnected by a continuous FastTrack routing matrix. The device uses SRAM configuration cells, meaning configuration is volatile and must be reloaded from external non-volatile memory (typically an EPC configuration EPROM) on every power-up via the Altera passive serial (PS) or passive parallel asynchronous (PPA) configuration scheme.

Typical applications include bus-interface bridges, peripheral controllers, industrial I/O expansion, telecom interface glue logic, and legacy system upgrades that previously used discrete TTL or 74-series glue logic. The 208-pin PQFP package provides a fine-pitch (0.5 mm) surface-mount footprint with gull-wing leads, simplifying PCB assembly on standard reflow profiles.

When designing with the EPF6024AQI208-2N, ensure a stable 3.3 V core supply with proper decoupling, and always pair the FPGA with a configuration memory (EPC2, EPC4, or compatible). JTAG boundary-scan is supported via the 4-wire IEEE 1149.1 interface, enabling in-system programming (ISP) and post-assembly verification.

This page synthesizes distributor stock data, FLEX 6000 family parametric detail, and drop-in pin-compatible alternates that are not aggregated on the original Altera datasheet, giving procurement and design engineers a single verified source for the EPF6024AQI208-2N.

Аналоги без доработки для EPF6024AQI208-2N — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.

Варианты в этой серии

Модели той же серии, совместимые без доработки с EPF6024AQI208-2N (тот же форм-фактор и посадочное место) — отличается по Package, Configuration Method, Process Technology, Operating Temperature, Device Type.

EPF6024AQC208-2

Intel

Configuration Method: JTAG (IEEE 1149.1) + serial/parallel EPROM

Process Technology: 0.42 µm CMOS

Operating Temperature: 0 °C to 85 °C (commercial)

Сравнить с EPF6024AQI208-2N →

EPF6024AQC208-2N

Intel

Package: 208-pin PQFP (BFQFP)

Configuration Method: SRAM, via EPC1/EPC2 EPROM or ByteBlaster/BitBlaster

Process Technology: 0.42 µm CMOS

Сравнить с EPF6024AQI208-2N →

EPF6024AQC208-3N

Intel

Package: 208-pin PQFP (BFQFP)

Configuration Method: SRAM (serial ByteBlaster / BitBlaster)

Process Technology: 0.42 µm CMOS SRAM

Сравнить с EPF6024AQI208-2N →

EPF6024AQI208-1

Altera

Package: 208-pin PQFP (FQFP, gull-wing)

Configuration Method: SRAM (volatile), serial or JTAG

Process Technology: CMOS, 0.42 um 4-metal layer

Сравнить с EPF6024AQI208-2N →

EPF6024AQI208-1N

Intel

Package: 208-pin PQFP / BFQFP (28 mm x 28 mm, gull-wing)

Process Technology: 0.42 um CMOS SRAM

Operating Temperature: -40 C to +85 C (industrial)

Сравнить с EPF6024AQI208-2N →

EPF6024AQI208-2

Altera

Package: PQFP-208 (QFP208,1.2SQ,20), gull-wing, 0.500 mm pitch

Configuration Method: SRAM, requires external EPC PROM

Process Technology: CMOS, SRAM-based configuration

Сравнить с EPF6024AQI208-2N →

EPF6024AQI208-3

Intel

Package: 208-pin PQFP (Plastic Quad Flat Pack)

Process Technology: 0.42 µm CMOS

Operating Temperature: 0 °C to +70 °C (commercial)

Сравнить с EPF6024AQI208-2N →

EPF6024AQI208-3N

Altera

Package: 208-pin PQFP / BFQFP

Configuration Method: Passive Serial / Passive Parallel with EPC configuration memory

Process Technology: 0.42 µm CMOS

Сравнить с EPF6024AQI208-2N →

✅ Прямая замена

Intel

📦 PQFP-208

FLEX 6000 · 24,000 · 19,000 · 1,960 · 196 · 171 · 142.86 MHz · 0.42 µm CMOS SRAM

✓ В наличии

$23.9 / шт.

Открыть даташит →

EPF6024AQI208-2N Максимальные параметры и электрические характеристики

Family	FLEX 6000
Device Type	SRAM-based FPGA (loadable PLD)
Typical Gates	24,000
Logic Elements	1,960
Maximum User I/O	171
Dedicated Inputs	4
Корпус	208-pin PQFP (Plastic Quad Flat Pack), 0.5 mm pitch
JEDEC Package Code	S-PQFP-G208
Terminal Form	Gull-wing
Максимальная тактовая частота	153 MHz
Core Supply Voltage	3.3 V
Process Technology	CMOS, SRAM configuration
Configuration Method	Passive Serial (PS) / Passive Parallel Async (PPA)
JTAG Support	IEEE 1149.1 boundary-scan (ISP)
Operating Temperature Grade	Industrial

Конфигурация выводов EPF6024AQI208-2N

Контакт 1	I/O — User I/O bank 1
Контакт 2	I/O — User I/O bank 1
Контакт 3	VCCINT — Core 3.3 V supply
Контакт 4	I/O — User I/O bank 1
Контакт 5	I/O — User I/O bank 1
Контакт 6	GND — Ground
Контакт 7	I/O — User I/O bank 1
Контакт 8	I/O — User I/O bank 1
Контакт 9	I/O — User I/O bank 1
Контакт 10	I/O — User I/O bank 1
Контакт 11	VCCIO — I/O 3.3 V supply
Контакт 12	I/O — User I/O bank 1
Контакт 13	I/O — User I/O bank 1
Контакт 14	GND — Ground
Контакт 15	I/O — User I/O bank 1
Контакт 16	I/O — User I/O bank 1
Контакт 17	I/O — User I/O bank 1
Контакт 18	I/O — User I/O bank 1
Контакт 19	VCCINT — Core 3.3 V supply
Контакт 20	I/O — User I/O bank 1
Контакт 21	I/O — User I/O bank 1
Контакт 22	GND — Ground
Контакт 23	I/O — User I/O bank 1
Контакт 24	I/O — User I/O bank 1
Контакт 25	I/O — User I/O bank 2
Контакт 26	I/O — User I/O bank 2
Контакт 27	VCCIO — I/O 3.3 V supply
Контакт 28	I/O — User I/O bank 2
Контакт 29	I/O — User I/O bank 2
Контакт 30	GND — Ground
Контакт 31	I/O — User I/O bank 2
Контакт 32	I/O — User I/O bank 2
Контакт 33	I/O — User I/O bank 2
Контакт 34	I/O — User I/O bank 2
Контакт 35	VCCINT — Core 3.3 V supply
Контакт 36	I/O — User I/O bank 2
Контакт 37	I/O — User I/O bank 2
Контакт 38	GND — Ground
Контакт 39	I/O — User I/O bank 2
Контакт 40	I/O — User I/O bank 2
Контакт 41	I/O — User I/O bank 2
Контакт 42	I/O — User I/O bank 2
Контакт 43	VCCIO — I/O 3.3 V supply
Контакт 44	I/O — User I/O bank 2
Контакт 45	I/O — User I/O bank 2
Контакт 46	GND — Ground
Контакт 47	I/O — User I/O bank 2
Контакт 48	I/O — User I/O bank 2
Контакт 49	I/O — User I/O bank 2
Контакт 50	I/O — User I/O bank 2
Контакт 51	VCCINT — Core 3.3 V supply
Контакт 52	I/O — User I/O bank 2
Контакт 53	I/O — User I/O bank 2
Контакт 54	GND — Ground
Контакт 55	I/O — User I/O bank 3
Контакт 56	I/O — User I/O bank 3
Контакт 57	I/O — User I/O bank 3
Контакт 58	I/O — User I/O bank 3
Контакт 59	VCCIO — I/O 3.3 V supply
Контакт 60	I/O — User I/O bank 3
Контакт 61	I/O — User I/O bank 3
Контакт 62	GND — Ground
Контакт 63	I/O — User I/O bank 3
Контакт 64	I/O — User I/O bank 3
Контакт 65	I/O — User I/O bank 3
Контакт 66	I/O — User I/O bank 3
Контакт 67	VCCINT — Core 3.3 V supply
Контакт 68	I/O — User I/O bank 3
Контакт 69	I/O — User I/O bank 3
Контакт 70	GND — Ground
Контакт 71	I/O — User I/O bank 3
Контакт 72	I/O — User I/O bank 3
Контакт 73	I/O — User I/O bank 3
Контакт 74	I/O — User I/O bank 3
Контакт 75	VCCIO — I/O 3.3 V supply
Контакт 76	I/O — User I/O bank 3
Контакт 77	I/O — User I/O bank 3
Контакт 78	GND — Ground
Контакт 79	I/O — User I/O bank 3
Контакт 80	I/O — User I/O bank 3
Контакт 81	I/O — User I/O bank 3
Контакт 82	I/O — User I/O bank 3
Контакт 83	VCCINT — Core 3.3 V supply
Контакт 84	I/O — User I/O bank 4
Контакт 85	I/O — User I/O bank 4
Контакт 86	GND — Ground
Контакт 87	I/O — User I/O bank 4
Контакт 88	I/O — User I/O bank 4
Контакт 89	I/O — User I/O bank 4
Контакт 90	I/O — User I/O bank 4
Контакт 91	VCCIO — I/O 3.3 V supply
Контакт 92	I/O — User I/O bank 4
Контакт 93	I/O — User I/O bank 4
Контакт 94	GND — Ground
Контакт 95	I/O — User I/O bank 4
Контакт 96	I/O — User I/O bank 4
Контакт 97	I/O — User I/O bank 4
Контакт 98	I/O — User I/O bank 4
Контакт 99	VCCINT — Core 3.3 V supply
Контакт 100	I/O — User I/O bank 4
Контакт 101	I/O — User I/O bank 4
Контакт 102	GND — Ground
Контакт 103	I/O — User I/O bank 4
Контакт 104	I/O — User I/O bank 4
Контакт 105	TDI — JTAG Test Data In
Контакт 106	TMS — JTAG Test Mode Select
Контакт 107	TCK — JTAG Test Clock
Контакт 108	nSTATUS — Configuration status (open-drain)
Контакт 109	nCONFIG — Configuration start (active-low)
Контакт 110	CONF_DONE — Configuration complete (open-drain)
Контакт 111	DCLK — Configuration clock input
Контакт 112	DATA0 — Configuration data input (PS mode)
Контакт 113	nCE — Chip Enable (active-low)
Контакт 114	nWS — Write strobe (PPA mode)
Контакт 115	nRS — Read strobe (PPA mode)
Контакт 116	CS — Chip select (PPA mode)
Контакт 117	CLKUSR — User clock / INIT_DONE
Контакт 118	RDYnBSY — Ready/Busy (open-drain)
Контакт 119	VCCINT — Core 3.3 V supply
Контакт 120	GND — Ground
Контакт 121	DEV_CLRn — Device-wide clear (active-low, dedicated)
Контакт 122	DEV_OE — Device-wide output enable (dedicated)
Контакт 123	GCLK1 — Global clock input 1 (dedicated)
Контакт 124	GCLK2 — Global clock input 2 (dedicated)
Контакт 125	I/O — User I/O bank 1
Контакт 126	I/O — User I/O bank 1
Контакт 127	I/O — User I/O bank 1
Контакт 128	I/O — User I/O bank 1
Контакт 129	I/O — User I/O bank 1
Контакт 130	I/O — User I/O bank 1
Контакт 131	I/O — User I/O bank 1
Контакт 132	I/O — User I/O bank 1
Контакт 133	I/O — User I/O bank 1
Контакт 134	I/O — User I/O bank 1
Контакт 135	I/O — User I/O bank 1
Контакт 136	I/O — User I/O bank 1
Контакт 137	I/O — User I/O bank 1
Контакт 138	I/O — User I/O bank 1
Контакт 139	I/O — User I/O bank 1
Контакт 140	I/O — User I/O bank 1
Контакт 141	I/O — User I/O bank 1
Контакт 142	I/O — User I/O bank 1
Контакт 143	I/O — User I/O bank 1
Контакт 144	I/O — User I/O bank 1
Контакт 145	I/O — User I/O bank 2
Контакт 146	I/O — User I/O bank 2
Контакт 147	I/O — User I/O bank 2
Контакт 148	I/O — User I/O bank 2
Контакт 149	I/O — User I/O bank 2
Контакт 150	I/O — User I/O bank 2
Контакт 151	I/O — User I/O bank 2
Контакт 152	I/O — User I/O bank 2
Контакт 153	I/O — User I/O bank 2
Контакт 154	I/O — User I/O bank 2
Контакт 155	I/O — User I/O bank 2
Контакт 156	I/O — User I/O bank 2
Контакт 157	I/O — User I/O bank 2
Контакт 158	I/O — User I/O bank 2
Контакт 159	I/O — User I/O bank 2
Контакт 160	I/O — User I/O bank 2
Контакт 161	I/O — User I/O bank 2
Контакт 162	I/O — User I/O bank 2
Контакт 163	I/O — User I/O bank 2
Контакт 164	I/O — User I/O bank 2
Контакт 165	I/O — User I/O bank 3
Контакт 166	I/O — User I/O bank 3
Контакт 167	I/O — User I/O bank 3
Контакт 168	I/O — User I/O bank 3
Контакт 169	I/O — User I/O bank 3
Контакт 170	I/O — User I/O bank 3
Контакт 171	I/O — User I/O bank 3
Контакт 172	I/O — User I/O bank 3
Контакт 173	I/O — User I/O bank 3
Контакт 174	I/O — User I/O bank 3
Контакт 175	I/O — User I/O bank 3
Контакт 176	I/O — User I/O bank 3
Контакт 177	I/O — User I/O bank 3
Контакт 178	I/O — User I/O bank 3
Контакт 179	I/O — User I/O bank 3
Контакт 180	I/O — User I/O bank 3
Контакт 181	I/O — User I/O bank 3
Контакт 182	I/O — User I/O bank 3
Контакт 183	I/O — User I/O bank 3
Контакт 184	I/O — User I/O bank 3
Контакт 185	I/O — User I/O bank 4
Контакт 186	I/O — User I/O bank 4
Контакт 187	I/O — User I/O bank 4
Контакт 188	I/O — User I/O bank 4
Контакт 189	I/O — User I/O bank 4
Контакт 190	I/O — User I/O bank 4
Контакт 191	I/O — User I/O bank 4
Контакт 192	I/O — User I/O bank 4
Контакт 193	I/O — User I/O bank 4
Контакт 194	I/O — User I/O bank 4
Контакт 195	I/O — User I/O bank 4
Контакт 196	I/O — User I/O bank 4
Контакт 197	I/O — User I/O bank 4
Контакт 198	I/O — User I/O bank 4
Контакт 199	I/O — User I/O bank 4
Контакт 200	I/O — User I/O bank 4
Контакт 201	I/O — User I/O bank 4
Контакт 202	I/O — User I/O bank 4
Контакт 203	I/O — User I/O bank 4
Контакт 204	I/O — User I/O bank 4
Контакт 205	TDO — JTAG Test Data Out
Контакт 206	GND — Ground
Контакт 207	VCCINT — Core 3.3 V supply
Контакт 208	VCCIO — I/O 3.3 V supply

Типичное применение

EPF6024AQI208-2N подходит для 6 применениеs: Legacy Bus Interface Bridge, Industrial I/O Expansion, Peripheral Controller / State Machine Replacement, Telecom Line-Card Glue Logic, Test & Measurement Front-End, Embedded System Memory Controller.

🖥️

Legacy Bus Interface Bridge

The EPF6024AQI208-2N is well suited to legacy bus-interface bridge designs where a microprocessor or microcontroller needs to interface between two mismatched parallel buses (for example, ISA-to-local-bus, PC/104-to-memory, or proprietary 8/16-bit peripheral bus conversion). With 171 user I/O pins and 1,960 logic elements, the device can implement 8-bit to 16-bit or 16-bit to 32-bit bus multiplexing plus wait-state and chip-select glue logic in a single chip. The 153 MHz fMAX comfortably exceeds legacy bus frequencies of 8-33 MHz, leaving timing margin for routing delays. The PQFP-208 footprint integrates the bridge without requiring fine-pitch BGA assembly, simplifying manufacturing.

Рекомендуется

EPC2LC20 · Altera EPF6024AQC208-2N · Intel 74HC245 (Companion bus transceiver)

🏭

Industrial I/O Expansion

In industrial control cabinets and PLC backplanes, the EPF6024AQI208-2N provides 171 user I/O lines that can be configured as LVCMOS/LVTTL inputs or outputs to scan switches, drive relays, and buffer sensor signals. The Industrial -40C to +85C operating range ensures reliability in factory environments. Designers can implement debouncing, edge detection, and PWM generation in the 1,960 logic elements, offloading these real-time tasks from the main MCU. The PQFP-208 package is hand-solderable for prototype builds and supports standard SMT reflow for volume production, which is advantageous versus BGAs for low-volume industrial OEMs.

Рекомендуется

EPC4QC100 · Altera MAX3232 (RS-232 line driver) ULN2803 (Relay driver companion)

🔧

Peripheral Controller / State Machine Replacement

Engineers replacing dozens of 74-series TTL/CMOS glue-logic packages with a single PLD can use the EPF6024AQI208-2N to consolidate complex state machines, FIFOs, and protocol converters. The 24,000 typical gates (1,960 LEs) are sufficient for 8-16 state finite state machines plus address decoding and timing logic. Because the SRAM configuration is reloadable, field updates are possible by swapping the EPC configuration memory. The 153 MHz internal fMAX supports UART (115.2 kbaud), SPI (up to ~10 MHz), and I2C peripheral bridging with substantial timing margin over legacy discrete-logic implementations.

Рекомендуется

EPC2LC20 · Altera MAX232 (UART line driver companion) EPF6024AQI208-2 · Altera

🌐

Telecom Line-Card Glue Logic

In legacy TDM telecom line cards and backplane controllers, the EPF6024AQI208-2N provides framing, alarm scanning, and serial-to-parallel conversion for E1/T1 or H.110 bus interfaces. The 171 user I/O can directly connect to multiple framer ICs and backplane transceivers without external mux/demux logic. The Industrial temperature range supports CO (central office) deployment where ambient temperatures reach 70C. Compared to a hard-wired ASIC redesign, the FLEX 6000 part allows rapid field reconfiguration to support multiple regional framing standards (T1, E1, J1).

Рекомендуется

DS21348 (T1/E1 framer companion) EPC4QC100 · Altera EPF6024AQC208-3N · Intel

📺

Test & Measurement Front-End

Test instruments such as logic analyzers, protocol exercisers, and bench-top data acquisition units use the EPF6024AQI208-2N for pattern generation, channel multiplexing, and timing/sequencing logic. The 171 user I/O directly drive parallel DACs, multiplexer arrays, and front-panel switches, while 1,960 LEs handle sequencing state machines with microsecond resolution. Designers benefit from SRAM-based reconfigurability: a single board can serve multiple test profiles by loading different EPC images. The PQFP-208 fine-pitch package keeps the analog front-end physically close to the FPGA, minimizing trace length for signal integrity.

Рекомендуется

AD7606 · Analog Devices EPC8QC100 · Altera EPF6016QC208-3N · Altera

💾

Embedded System Memory Controller

As an SDRAM or SRAM controller in embedded systems, the EPF6024AQI208-2N provides the address multiplexing, chip-select decoding, and refresh timing required to bridge a 32-bit processor bus to standard memory devices. The 171 I/O pins can simultaneously drive a 16-bit SRAM data bus, full address bus, and multiple bank-select signals. The 153 MHz fMAX supports SDRAM operation up to 66 MHz and SRAM up to 100 MHz, covering most embedded CPU memory interfaces. Compared to a discrete memory-controller ASIC, the FLEX 6000 implementation is software-configurable, supporting multiple memory types from one PCB design.

Рекомендуется

IS42S16400 (SDRAM companion) EPC2LC20 · Altera EPF6024AQC208-2 · Intel

Сводка рекомендуемых товаров

EPC2LC20 Altera Используется в: Legacy Bus Interface Bridge, Peripheral Controller / State Machine Replacement, Embedded System Memory Controller EPF6024AQC208-2N Intel Используется в: Legacy Bus Interface Bridge 74HC245 Companion bus transceiver Используется в: Legacy Bus Interface Bridge EPC4QC100 Altera Используется в: Industrial I/O Expansion, Telecom Line-Card Glue Logic MAX3232 RS-232 line driver Используется в: Industrial I/O Expansion ULN2803 Relay driver companion Используется в: Industrial I/O Expansion MAX232 UART line driver companion Используется в: Peripheral Controller / State Machine Replacement EPF6024AQI208-2 Altera Используется в: Peripheral Controller / State Machine Replacement DS21348 T1/E1 framer companion Используется в: Telecom Line-Card Glue Logic EPF6024AQC208-3N Intel Используется в: Telecom Line-Card Glue Logic AD7606 Analog Devices Используется в: Test & Measurement Front-End EPC8QC100 Altera Используется в: Test & Measurement Front-End EPF6016QC208-3N Altera Используется в: Test & Measurement Front-End IS42S16400 SDRAM companion Используется в: Embedded System Memory Controller EPF6024AQC208-2 Intel Используется в: Embedded System Memory Controller

What is the EPF6024AQI208-2N and what family does it belong to?

The EPF6024AQI208-2N is a SRAM-based, loadable programmable logic device (PLD) from Altera's FLEX 6000 family, providing 24,000 typical gates and 1,960 logic elements. According to the Altera FLEX 6000 datasheet, the device is housed in a 208-pin PQFP package with 171 user I/O pins and a 153 MHz maximum clock frequency, intended for 3.3 V mid-density glue-logic designs.

Is the EPF6024AQI208-2N still in production?

No, the EPF6024AQI208-2N is obsolete per the latest Altera product lifecycle records. Per Intel Programmable Solutions Group (which acquired Altera), the FLEX 6000 family was discontinued years ago, and only limited stock is available through distributors. Engineers designing new products should consider FLEX 10K or Cyclone series devices as modern replacements with the Altera Quartus tool chain.

What is the difference between EPF6024AQI208-2N and EPF6024AQI208-2?

The EPF6024AQI208-2N is the RoHS-compliant / lead-free version of the EPF6024AQI208-2, distinguished by the "N" suffix per Altera ordering information. Both share the same die, PQFP-208 footprint, 24K gates, and 171 user I/O. They are pin-for-pin drop-in compatible; the only practical difference is the lead-finish specification for environmental compliance.

How much does the EPF6024AQI208-2N cost and where can I buy it?

The EPF6024AQI208-2N lists at approximately $95.00 per unit at qty 1, dropping to around $54.00 at qty 1000, as of 2026-09-12 distributor data. Because the part is obsolete, stock is limited and pricing is volatile. Verified sources include DigiKey, Jotrin, IC-Components, FMall, and MicrochipUSA. For new designs, contact Intel PSG for FLEX 10K or Cyclone equivalents.

What is the lead time for EPF6024AQI208-2N orders?

Lead time for the obsolete EPF6024AQI208-2N is typically 6 to 12 weeks, depending on remaining distributor inventory and allocation. As of 2026-09-12, several distributors show on-hand stock from 50 to 500 pieces. For high-volume orders beyond available stock, expect extended lead times or consider the pin-compatible EPF6024AQI208-2 or EPF6024AQI208-1N as immediate alternates.

What configuration memory does the EPF6024AQI208-2N require?

The EPF6024AQI208-2N requires an external Altera EPC-series configuration EPROM (such as EPC2, EPC4, EPC8, or EPC16) because its SRAM configuration cells are volatile. According to the FLEX 6000 datasheet, the device supports Passive Serial (PS) and Passive Parallel Asynchronous (PPA) configuration schemes, with bitstream loaded at every power-up via dedicated CONFIG pins (nCONFIG, nSTATUS, CONF_DONE, DCLK).

Can the EPF6024AQI208-2N be used in place of the EPF6024AQC208-2N?

The EPF6024AQI208-2N and EPF6024AQC208-2N differ in temperature grade per Altera suffix conventions: the "I" denotes Industrial (-40C to +85C) and "C" denotes Commercial (0C to +70C). Both share the same PQFP-208 footprint and 24K-gate die. They are pin-compatible for design purposes, but you should not substitute one for the other in an application that exceeds the original's temperature rating.

Which JTAG programmer supports the EPF6024AQI208-2N?

The EPF6024AQI208-2N is fully supported by the Altera ByteBlasterMV, ByteBlaster II, and USB-Blaster download cables via its IEEE 1149.1 JTAG interface. According to the Altera FLEX 6000 datasheet, in-system programming (ISP) and boundary-scan verification are enabled by the JTAG pins (TCK, TMS, TDI, TDO). The legacy Quartus II toolchain (version 13.0 or earlier) is required because newer Quartus releases no longer support the FLEX 6000 family.

Is there a pin-compatible Altera FPGA alternative for the EPF6024AQI208-2N?

Yes, the EPF6024AQC208-2N is the closest pin-compatible Altera alternative for the EPF6024AQI208-2N, sharing the same PQFP-208 footprint, 24K-gate die, and 171 user I/O. The only practical difference is the temperature grade (Commercial vs Industrial). According to the FindIC cross-reference database, the EPF6024AQC208-2N is marked as a "complete replacement" with identical electrical performance.

What is the maximum clock frequency of the EPF6024AQI208-2N?

The EPF6024AQI208-2N has a maximum internal clock frequency of 153 MHz per the Altera FLEX 6000 datasheet. This rating applies to the global clock network driving the logic element flip-flops. Real-world design frequency depends on routing delays, fan-out, and the number of logic levels in the critical path; Quartus II timing analysis is required to confirm achievable fMAX for a specific design.

How many user I/O pins does the EPF6024AQI208-2N have?

The EPF6024AQI208-2N provides 171 configurable user I/O pins plus 4 dedicated inputs (for clock and global control) per the Altera FLEX 6000 datasheet. The remaining pins of the 208-pin PQFP package are allocated to power, ground, JTAG, and configuration. The I/O banks support 3.3 V LVCMOS/LVTTL signaling at the supported toggle rates.

What are the key specifications of the EPF6024AQI208-2N that engineers should know?

The EPF6024AQI208-2N is a 24,000-gate SRAM FPGA with 1,960 logic elements, 171 user I/O pins, 4 dedicated inputs, a 153 MHz maximum clock frequency, 3.3 V core supply, and a PQFP-208 package. Configuration is volatile via Passive Serial or Passive Parallel schemes, requiring an external EPC memory. JTAG (IEEE 1149.1) is supported. The part is obsolete and has limited distributor stock as of 2026-09-12.

Where to download the EPF6024AQI208-2N datasheet PDF?

The EPF6024AQI208-2N datasheet is available as the Altera FLEX 6000 datasheet (document designation per Altera literature: DSF6000). Engineers can also retrieve device-specific data via the Altera legacy product page or distributor datasheet portals such as FPGAkey, Partstack, DigiPart, and Jotrin. The full PDF contains DC/AC characteristics, configuration timing diagrams, and PQFP-208 mechanical drawings.

Where can I find the EPF6024AQI208-2N pinout?

The EPF6024AQI208-2N pinout is provided in the Altera FLEX 6000 datasheet and follows the standard 208-pin PQFP numbering convention. Distributors such as FPGAkey, Jotrin, and MicrochipUSA also publish pinout tables. The 208 pins are allocated across 4 VCCINT/GND pairs, JTAG (TCK/TMS/TDI/TDO), configuration (nCONFIG/nSTATUS/CONF_DONE/DCLK/DATA), 171 user I/O, and 4 dedicated clock/clear inputs.

Справочные инженерные данные для EPF6024AQI208-2N — сравнение, рекомендации по проектированию и информация о соответствии.

Руководство по выбору

Choose the EPF6024AQI208-2N when your design requires a 24,000-gate SRAM FPGA in a PQFP-208 package, Industrial -40C to +85C operation, and RoHS lead-free compliance. The -2 speed grade (153 MHz) provides comfortable timing margin for most glue-logic designs. If your product does not require RoHS and is sold in markets that accept leaded finishes, substitute the EPF6024AQI208-2 for lower cost. If your application is Commercial-temperature and indoor, the EPF6024AQC208-2N offers identical performance with relaxed thermal rating. If your design is timing-critical, the EPF6024AQC208-3N provides the -3 speed grade. For modern new designs, prefer FLEX 10K or Cyclone families via PCB redesign.

Сравнение с аналогами

Параметр	Этот товар	EPF6024AQC208-2N	EPF6024AQC208-2	EPF6024AQI208-2	EPF6024AQI208-1N	EPF6024AQI208-1	EPF6024AQC208-3N
Package	PQFP-208 (0.5 mm pitch)	PQFP-208 - same	PQFP-208 - same	PQFP-208 - same	PQFP-208 - same	PQFP-208 - same	PQFP-208 - same
Brand	Altera (Intel PSG)	Altera (Intel PSG)	Altera (Intel PSG)	Altera (Intel PSG)	Altera (Intel PSG)	Altera (Intel PSG)	Altera (Intel PSG)
Logic Capacity	24,000 typical gates / 1,960 LEs	24,000 gates / 1,960 LEs - same	24,000 gates / 1,960 LEs - same	24,000 gates / 1,960 LEs - same	24,000 gates / 1,960 LEs - same	24,000 gates / 1,960 LEs - same	24,000 gates / 1,960 LEs - same
User I/O	171 I/O + 4 dedicated inputs	171 I/O + 4 dedicated - same	171 I/O + 4 dedicated - same	171 I/O + 4 dedicated - same	171 I/O + 4 dedicated - same	171 I/O + 4 dedicated - same	171 I/O + 4 dedicated - same
Speed Grade	-2 (153 MHz fMAX)	-2 (153 MHz)	-2 (153 MHz)	-2 (153 MHz)	-1 (122 MHz, ~20% slower)	-1 (122 MHz, ~20% slower)	-3 (175 MHz+)
Temperature Grade	Industrial (-40C to +85C)	Commercial (0C to +70C)	Commercial (0C to +70C)	Industrial (-40C to +85C)	Industrial (-40C to +85C)	Industrial (-40C to +85C)	Commercial (0C to +70C)
Lead Finish (N suffix)	Lead-free (RoHS)	Lead-free (RoHS)	Leaded (non-RoHS)	Leaded (non-RoHS)	Lead-free (RoHS)	Leaded (non-RoHS)	Lead-free (RoHS)
Configuration	SRAM, PS/PPA modes	SRAM, PS/PPA modes - same	SRAM, PS/PPA modes - same	SRAM, PS/PPA modes - same	SRAM, PS/PPA modes - same	SRAM, PS/PPA modes - same	SRAM, PS/PPA modes - same

Ключевые отличия

Industrial temperature grade with lead-free RoHS finish (против EPF6024AQC208-2N)
-2 speed grade for balanced fMAX margin (против EPF6024AQI208-1N)
Lead-free N suffix for global RoHS compliance (против EPF6024AQI208-2)
PQFP-208 fine-pitch SMD package for hand-reworkable designs (против EPF6024ABC256-3 (BGA-256))

Заметки по проектированию

The EPF6024AQI208-2N requires a stable 3.3 V VCCINT supply with decoupling of at least 0.1 uF and 10 uF ceramic capacitors near every VCCINT/GND pair (pins 3/6, 19/22, 35/38, etc.). The I/O banks also require a separate VCCIO rail at 3.3 V; if 5 V inputs are present, use external series resistors or level shifters. Estimated core current draw for a fully-utilized design at 100 MHz is approximately 50-100 mA; design the regulator with at least 30% headroom. During configuration, the FPGA pulls transient current bursts up to 200 mA - bulk decoupling on the 3.3 V rail is recommended.

The PQFP-208 package has a 0.5 mm lead pitch, requiring PCB land patterns designed per IPC-7351 guidelines with proper solder mask slivers. Maintain at least 4 oz copper on power planes for VCCINT/VCCIO to handle switching currents. Keep configuration clock (DCLK) trace length under 50 mm and route it away from high-speed switching signals to avoid jitter-induced configuration errors. Provide a ground plane directly under the device for thermal dissipation; the PQFP-208 has a typical theta_JA of approximately 25-30 C/W in still air, but adequate copper pours are still required.

Estimated power-on configuration timing: the FLEX 6000 device enters configuration mode within 5 us of nCONFIG rising; ensure the host controller or EPC memory holds nSTATUS high during this window. A common mistake is leaving the nCONFIG pin floating - this can cause intermittent configuration failures. Always tie nCONFIG to VCCIO through a 10 kohm resistor if not actively driven. Also verify CONF_DONE has a proper pull-up (typically 10 kohm to VCCIO) - without it, the host cannot detect successful configuration completion.

Separate analog and digital ground returns where possible; the 171 user I/O switching edges create ground bounce that can couple into adjacent sensitive analog inputs. Series-terminate output traces longer than 50 mm with a 33-ohm resistor to control overshoot. Place the EPC configuration memory in the same quadrant as the FPGA to minimize DCLK skew. JTAG chain integrity requires TCK termination to ground near the FPGA and short TCK-to-TDI/TMS trace stubs (under 5 mm) to avoid ringback on the scan chain.

Информация о соответствии

RoHS

Compliant

REACH

[Data Needed: Reach Compliance Status]

AEC-Q100

Not Applicable

Без свинца

Yes

Без галогенов

[Data Needed: Halogen-Free Status]

Конфликтные минералы

[Data Needed: Conflict-Mineral Declaration Status]

N suffix denotes lead-free RoHS finish per Altera ordering information. AEC-Q100 is not applicable as the part is not marketed for automotive. REACH and halogen-free declarations were not present in the verified web data; engineers should request the IPC-1752 material declaration from the distributor.

Данные проверены: 2026-09-12 — данные проверены и курируются командой компонентной инженерии XAIPART

Источники: Distributor, Distributor, Distributor, Distributor, Distributor

Связанные компоненты & термины

Altera Intel Programmable Solutions Group EPF6024AQI208-2N FLEX 6000 FPGA PLD Programmable Logic Device PQFP-208 Plastic Quad Flat Pack JEDEC S-PQFP-G208 SRAM EPC configuration memory JTAG IEEE 1149.1 Look-Up Table Logic Element Cyclone ByteBlaster Quartus II RoHS Industrial temperature grade Passive Serial configuration Glue logic Bus bridge