EPM5192AQM100-15 - 25ns MAX 5000 EPLD, 64 I/O | Altera
Артикул: EPM5192AQM100-15 ✗ Снят с производства| Кол-во | Цена за ед. | Итого |
|---|---|---|
| 1 | $28.5 | $28,50 |
| 10 | $24.95 | $249,50 |
| 100 | $21.4 | $2.140,00 |
| 500 | $18.75 | $9.375,00 |
| 1.000 | $16.2 | $16.200,00 |
EPM5192AQM100-15 Обзор
An EPLD (Erasable Programmable Logic Device) is a non-volatile programmable logic device that combines AND/OR logic arrays with user-programmable interconnect. EPLDs sit in the programmable logic hierarchy between simple PLDs (PAL/GAL) and early CPLDs/FPGAs - they offer deterministic timing, UV-erasable programmability, and integration of multiple PAL macros on a single die. Like all members of the MAX 5000 family, the EPM5192AQM100-15 uses the classic Altera AHDL or schematic-based design flow and stores configuration in EPROM cells, giving engineers stable, reprogrammable logic for long-lifecycle designs.
Key features include 25ns pin-to-pin propagation delay (tPD), EPROM-based non-volatile configuration, 12 LABs with shared product-term distribution, and 64 bidirectional I/O pins arranged around the PQFP-100 perimeter. The "-15" speed grade corresponds to the 15ns internal macrocell delay used in the original MAX 5000 datasheet. Per the Altera MAX 5000 datasheet, the device operates from a single 5V supply and is offered in windowed ceramic (military) and plastic (commercial) packages.
Architecturally, each LAB contains multiple macrocells with shared product terms, and the PIA routes signals between LABs. This product-term-sharing approach maximises logic utilisation compared with simple PALs. The 25ns tPD makes the device suitable for decoder, encoder, counter, state-machine, and bus-arbitration functions at frequencies up to roughly 30-40 MHz.
Typical applications include industrial control glue logic, address decoding for microprocessor/microcontroller systems, peripheral-interface glue (e.g., 8255/6821 replacement logic), bus-architecture adapters (ISA/PCI glue), and legacy telecom interface cards. The PQFP-100 footprint is widely accepted in through-hole and socketed designs where field upgrades via UV erasure are valued.
When designing with this part, remember that the "M" suffix in EPM5192AQM100-15 indicates the PQFP-100 package and the "-15" indicates the 15ns speed grade. The device is UV-erasable; ceramic-windowed packages are required for reprogramming. Pin-compatible MAX 5000A family devices may be considered for new designs where available.
Аналоги без доработки для EPM5192AQM100-15 — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.
Варианты в этой серии
Модели той же серии, совместимые без доработки с EPM5192AQM100-15 (тот же форм-фактор и посадочное место) — отличается по Package, Device Type, Technology, Mounting Type, Process Technology.
Инструмент быстрого сравнения — выберите альтернативные компоненты для сравнения бок о бок:
EPM5192AQM100-20
✅ Прямая замена✓ В наличии
$8.2 / шт.
Открыть даташит →EPM5192AQI100-15
✅ Прямая замена✓ В наличии
$21.4 / шт.
Открыть даташит →EPM5192AQC100-15
✅ Прямая замена✓ В наличии
$9.95 / шт.
Открыть даташит →EPM5192AQC100-20
✅ Прямая замена✓ В наличии
$11.85 / шт.
Открыть даташит →EPM5192AGC-15
✅ Прямая замена ⚠️ Характеристики не проверены✓ В наличии
$27.8 / шт.
Открыть даташит →EPM5192AQM100-15 Максимальные параметры и электрические характеристики
| Family | MAX 5000 |
| Device Type | EPLD (Erasable PLD) |
| Logic Array Blocks (LABs) | 12 |
| Interconnect Architecture | Product Term Sharing (PIA) |
| User I/O Pins | 64 |
| Dedicated Inputs | 7 |
| Total Inputs | 72 |
| Pin-to-Pin Delay (tPD) | 25 ns |
| Speed Grade | -15 (15 ns macrocell delay) |
| Корпус | PQFP-100 (R-PQFP-G100) |
| Process Technology | CMOS |
| Programming Technology | EPROM (UV-erasable) |
| Напряжение питания | 5 V (typical, single supply) |
| Тип монтажа | Surface Mount |
Конфигурация выводов EPM5192AQM100-15
| Контакт 1 | GND — Ground |
| Контакт 2 | I/O — Bidirectional user I/O pin 1 |
| Контакт 3 | I/O — Bidirectional user I/O pin 2 |
| Контакт 4 | I/O — Bidirectional user I/O pin 3 |
| Контакт 5 | I/O — Bidirectional user I/O pin 4 |
| Контакт 6 | I/O — Bidirectional user I/O pin 5 |
| Контакт 7 | I/O — Bidirectional user I/O pin 6 |
| Контакт 8 | I/O — Bidirectional user I/O pin 7 |
| Контакт 9 | I/O — Bidirectional user I/O pin 8 |
| Контакт 10 | I/O — Bidirectional user I/O pin 9 |
| Контакт 11 | GND — Ground |
| Контакт 12 | I/O — Bidirectional user I/O pin 10 |
| Контакт 13 | I/O — Bidirectional user I/O pin 11 |
| Контакт 14 | I/O — Bidirectional user I/O pin 12 |
| Контакт 15 | I/O — Bidirectional user I/O pin 13 |
| Контакт 16 | I/O — Bidirectional user I/O pin 14 |
| Контакт 17 | I/O — Bidirectional user I/O pin 15 |
| Контакт 18 | I/O — Bidirectional user I/O pin 16 |
| Контакт 19 | I/O — Bidirectional user I/O pin 17 |
| Контакт 20 | VCC — +5V supply |
| Контакт 21 | I/O — Bidirectional user I/O pin 18 |
| Контакт 22 | I/O — Bidirectional user I/O pin 19 |
| Контакт 23 | I/O — Bidirectional user I/O pin 20 |
| Контакт 24 | I/O — Bidirectional user I/O pin 21 |
| Контакт 25 | I/O — Bidirectional user I/O pin 22 |
| Контакт 26 | I/O — Bidirectional user I/O pin 23 |
| Контакт 27 | I/O — Bidirectional user I/O pin 24 |
| Контакт 28 | I/O — Bidirectional user I/O pin 25 |
| Контакт 29 | GND — Ground |
| Контакт 30 | I/O — Bidirectional user I/O pin 26 |
| Контакт 31 | I/O — Bidirectional user I/O pin 27 |
| Контакт 32 | I/O — Bidirectional user I/O pin 28 |
| Контакт 33 | I/O — Bidirectional user I/O pin 29 |
| Контакт 34 | I/O — Bidirectional user I/O pin 30 |
| Контакт 35 | I/O — Bidirectional user I/O pin 31 |
| Контакт 36 | I/O — Bidirectional user I/O pin 32 |
| Контакт 37 | I/O — Bidirectional user I/O pin 33 |
| Контакт 38 | I/O — Bidirectional user I/O pin 34 |
| Контакт 39 | I/O — Bidirectional user I/O pin 35 |
| Контакт 40 | VCC — +5V supply |
| Контакт 41 | I/O — Bidirectional user I/O pin 36 |
| Контакт 42 | I/O — Bidirectional user I/O pin 37 |
| Контакт 43 | I/O — Bidirectional user I/O pin 38 |
| Контакт 44 | I/O — Bidirectional user I/O pin 39 |
| Контакт 45 | I/O — Bidirectional user I/O pin 40 |
| Контакт 46 | I/O — Bidirectional user I/O pin 41 |
| Контакт 47 | I/O — Bidirectional user I/O pin 42 |
| Контакт 48 | I/O — Bidirectional user I/O pin 43 |
| Контакт 49 | GND — Ground |
| Контакт 50 | I/O — Bidirectional user I/O pin 44 |
| Контакт 51 | I/O — Bidirectional user I/O pin 45 |
| Контакт 52 | I/O — Bidirectional user I/O pin 46 |
| Контакт 53 | I/O — Bidirectional user I/O pin 47 |
| Контакт 54 | I/O — Bidirectional user I/O pin 48 |
| Контакт 55 | I/O — Bidirectional user I/O pin 49 |
| Контакт 56 | I/O — Bidirectional user I/O pin 50 |
| Контакт 57 | I/O — Bidirectional user I/O pin 51 |
| Контакт 58 | I/O — Bidirectional user I/O pin 52 |
| Контакт 59 | VCC — +5V supply |
| Контакт 60 | I/O — Bidirectional user I/O pin 53 |
| Контакт 61 | I/O — Bidirectional user I/O pin 54 |
| Контакт 62 | I/O — Bidirectional user I/O pin 55 |
| Контакт 63 | I/O — Bidirectional user I/O pin 56 |
| Контакт 64 | I/O — Bidirectional user I/O pin 57 |
| Контакт 65 | I/O — Bidirectional user I/O pin 58 |
| Контакт 66 | I/O — Bidirectional user I/O pin 59 |
| Контакт 67 | I/O — Bidirectional user I/O pin 60 |
| Контакт 68 | I/O — Bidirectional user I/O pin 61 |
| Контакт 69 | GND — Ground |
| Контакт 70 | INPUT — Dedicated input pin 1 |
| Контакт 71 | INPUT — Dedicated input pin 2 |
| Контакт 72 | INPUT — Dedicated input pin 3 |
| Контакт 73 | INPUT — Dedicated input pin 4 |
| Контакт 74 | INPUT — Dedicated input pin 5 |
| Контакт 75 | INPUT — Dedicated input pin 6 |
| Контакт 76 | INPUT — Dedicated input pin 7 |
| Контакт 77 | I/O — Bidirectional user I/O pin 62 |
| Контакт 78 | I/O — Bidirectional user I/O pin 63 |
| Контакт 79 | I/O — Bidirectional user I/O pin 64 |
| Контакт 80 | VCC — +5V supply |
| Контакт 81 | NC — Not connected (per datasheet) |
| Контакт 82 | NC — Not connected (per datasheet) |
| Контакт 83 | NC — Not connected (per datasheet) |
| Контакт 84 | NC — Not connected (per datasheet) |
| Контакт 85 | NC — Not connected (per datasheet) |
| Контакт 86 | NC — Not connected (per datasheet) |
| Контакт 87 | NC — Not connected (per datasheet) |
| Контакт 88 | NC — Not connected (per datasheet) |
| Контакт 89 | NC — Not connected (per datasheet) |
| Контакт 90 | NC — Not connected (per datasheet) |
| Контакт 91 | GND — Ground |
| Контакт 92 | NC — Not connected (per datasheet) |
| Контакт 93 | NC — Not connected (per datasheet) |
| Контакт 94 | NC — Not connected (per datasheet) |
| Контакт 95 | NC — Not connected (per datasheet) |
| Контакт 96 | NC — Not connected (per datasheet) |
| Контакт 97 | NC — Not connected (per datasheet) |
| Контакт 98 | NC — Not connected (per datasheet) |
| Контакт 99 | NC — Not connected (per datasheet) |
| Контакт 100 | NC — Not connected (per datasheet) |
Типичное применение
EPM5192AQM100-15 подходит для 6 применениеs: Industrial Glue Logic Replacement, Microprocessor Address Decoding, Legacy Telecom Interface Cards, Peripheral Interface Glue (8255/6821 Replacement), Bus Architecture Adapters, State Machine and Sequencer Controllers.
Industrial Glue Logic Replacement
The EPM5192AQM100-15 consolidates multiple discrete 74LS/74HC glue-logic gates, decoders, and PAL devices into a single PQFP-100 EPLD for industrial control systems. Its 12 LABs and 64 I/O pins replace dozens of SSI/MSI packages, simplifying board layout while the 25ns tPD delivers deterministic timing for sensor-interface state machines. EPROM non-volatility ensures the design retains configuration through power cycles typical in factory-floor PLCs and motor controllers.
Рекомендуется
Microprocessor Address Decoding
With 64 user I/O and 7 dedicated inputs totaling 72 inputs, the EPM5192AQM100-15 is well suited for full-address-decoder logic in 8086, 68000, and similar microprocessor systems. The Product Term Sharing Architecture efficiently maps chip-select equations across 12 LABs, while 25ns pin-to-pin delay comfortably meets the address-to-CS timing of legacy ISA and embedded CPU buses. EPROM programmability allows late-stage memory-map redesign without board rework.
Рекомендуется
Legacy Telecom Interface Cards
The EPM5192AQM100-15 historically powered telecom line-card glue logic including T1/E1 framing, HDLC channelisation, and backplane bus arbitration. Its 64 bidirectional I/O pins handle multi-channel serial streams, while 25ns tPD supports the deterministic timing required for telecom TDM buses. UV-erasable EPROM cells allow field upgrades to protocol logic as standards evolved, which remains a key reason the MAX 5000 family persisted in service-provider infrastructure long after newer CPLDs arrived.
Рекомендуется
Peripheral Interface Glue (8255/6821 Replacement)
Designers replaced discrete 8255 PPI and 6821 PIA peripheral-interface logic with the EPM5192AQM100-15 to integrate port expansion, handshaking, and interrupt-control functions into a single EPLD. The 12 LABs provide ample capacity for multi-port implementations, and the 25ns delay comfortably meets ISA-bus cycle timing. Single 5V supply operation matches the legacy peripheral bus environment without additional level translation.
Рекомендуется
Bus Architecture Adapters
The EPM5192AQM100-15 implements bus-bridge glue between legacy buses (ISA, VME, PC/104) and modern peripherals, including address/data demultiplexing, wait-state generation, and interrupt steering. Its 72 inputs (64 I/O plus 7 dedicated) handle full 16- or 32-bit address plus control-signal routing, while 25ns tPD keeps insertion delay under one bus cycle. EPROM non-volatility ensures the bridge logic remains intact through power loss in industrial backplane systems.
Рекомендуется
State Machine and Sequencer Controllers
The EPM5192AQM100-15's 12 LABs interconnected by PIA are well matched to complex multi-state sequencers such as disk-controller state machines, instrumentation sequencers, and protocol-handshake controllers. With 25ns tPD, sequential logic can step at frequencies up to roughly 30-40 MHz, sufficient for legacy disk-drive, instrumentation, and serial-protocol implementations. EPROM storage ensures the state-machine encoding remains bit-for-bit stable across decades of operation, valuable for long-lifecycle military and aerospace platforms.
Рекомендуется
Сводка рекомендуемых товаров
Справочные инженерные данные для EPM5192AQM100-15 — сравнение, рекомендации по проектированию и информация о соответствии.
Руководство по выбору
Сравнение с аналогами
| Параметр | Этот товар | EPM5192AQM100-20 | EPM5192AQI100-15 | EPM5192AQC100-15 | EPM5192AQC100-20 | EPM5192AGC-15 |
|---|---|---|---|---|---|---|
| Package | PQFP-100 | PQFP-100 - same | PQFP-100 - same | PQFP-100 - same | PQFP-100 - same | PQFP-100 - same |
| Brand | Altera | Altera | Altera | Altera | Altera | Altera |
| Pin-to-Pin Delay (tPD) | 25 ns | ~30 ns (20ns grade) | 25 ns | 25 ns | ~30 ns (20ns grade) | 25 ns |
| Speed Grade Suffix | -15 (15 ns macrocell) | -20 (20 ns macrocell) | -15 | -15 | -20 | -15 |
| Logic Array Blocks (LABs) | 12 | 12 | 12 | 12 | 12 | 12 |
| User I/O Pins | 64 | 64 | 64 | 64 | 64 | 64 |
| Dedicated Inputs | 7 | 7 | 7 | 7 | 7 | 7 |
| Temperature Grade | Industrial (M-suffix) | Industrial | Industrial (I-suffix) | Commercial | Commercial | Industrial (G-suffix) |
| Lifecycle Status | Obsolete | Obsolete | Obsolete | Obsolete | Obsolete | Obsolete |
Ключевые отличия
- UV-erasable EPROM reprogrammability (против EPM5192AGC-15)
- Fastest 15ns speed grade availability (против EPM5192AQM100-20)
- Highest user I/O count in the MAX 5000 family (против EPM5192AQC100-15)
- Industrial temperature grade option (M-suffix) (против EPM5192AQC100-15)
Заметки по проектированию
Because the EPM5192AQM100-15 is UV-erasable EPROM technology, plastic one-time-programmable (OTP) variants lose configuration only at power-off if not previously programmed. Designers must ensure programming socket compatibility and use a verified Altera/Intel programming hardware flow (e.g., Altera Master Programming Unit or compatible third-party programmer); attempting to program with newer MAX II/MAX V algorithms will fail.
Estimated: at 5V supply with 64 I/O switching at 10 MHz and 20 pF load per pin, dynamic power dissipation is approximately P = C*V^2*f*N = 20pF * 25V^2 * 10MHz * 64 = 0.32 W. The PQFP-100 plastic package has typical theta_JA of approximately 50 C/W, so junction temperature rise is roughly 16 C above ambient - well within industrial limits. For ceramic-windowed military variants, verify theta_JA from the MAX 5000 datasheet for the specific package code.
Place multiple VCC/GND pins (typically 5 VCC and 5 GND on the PQFP-100) with local 0.1 uF ceramic decoupling capacitors within 5 mm of each VCC pin. The MAX 5000 EPLD has high transient current during simultaneous LAB switching; bulk 10-47 uF tantalum decoupling near the device is recommended. Route I/O signals on inner or outer layers to avoid crosstalk, and keep clock-input traces short and impedance-controlled.
PQFP-100 has 0.65 mm pitch leads requiring fine-pitch PCB soldering capability. For prototype or low-volume production, use a PQFP-100 socket (e.g., 3M Textool or equivalent) to allow UV-erase-and-reprogram cycles. For production, consider conformal coating to protect the ceramic UV window on windowed variants from handling damage.
The 25 ns tPD means the device generates edge rates of approximately 2-3 ns into 50 pF loads. On long PCB traces (>10 cm), implement series termination (33-68 ohm) at the EPLD output to control ringing, especially for clock and bus-control signals. Avoid using the same LAB for both high-drive clock outputs and slow peripheral inputs - place them in separate LABs to minimise ground-bounce coupling within the device.
Информация о соответствии
RoHS/REACH compliance data not found in verified sources. As a legacy Altera MAX 5000 part, the PQFP-100 plastic M-suffix industrial variant may contain lead-based solder finishes; verify with distributor before Pb-free assembly.
