EPM9560RC240-10 - MAX 9000 CPLD 560 Macro Cells | Altera
Артикул: EPM9560RC240-10 ✗ Снят с производства| Кол-во | Цена за ед. | Итого |
|---|---|---|
| 1 | $0 | $0,00 |
| 10 | $0 | $0,00 |
| 100 | $0 | $0,00 |
| 500 | $0 | $0,00 |
| 1.000 | $0 | $0,00 |
EPM9560RC240-10 Обзор
A CPLD (Complex Programmable Logic Device) is a programmable logic IC that combines the flexibility of an FPGA with the non-volatile, instant-on simplicity of a PAL. CPLDs sit between simple glue logic and full FPGAs in the programmable logic hierarchy: they offer deterministic timing, single-chip integration of bus interfaces and state machines, and no external configuration memory. The MAX 9000 family extends this concept with multiple interconnected logic array blocks (LABs) and a programmable interconnect array, delivering FPGA-like density with CPLD-like predictability.
The EPM9560RC240-10 provides 560 macro cells organized into 12 LABs, each containing 16 macrocells, plus 12 dedicated input/GCLK pins and 4 dedicated input pins. Its 10 ns propagation delay (the '-10' speed grade) makes it suitable for bus-interface and control-path logic where deterministic timing matters more than raw density. The 240-pin RQFP package exposes up to 192 user I/O pins, enabling wide bus widths without external multiplexing.
Architecturally, the MAX 9000 uses CMOS EEPROM technology, giving the device non-volatile configuration that is live immediately at power-up - no boot PROM or configuration controller is required. This makes it attractive for industrial control, instrumentation, and legacy telecom boards where instant-on operation and long-term availability are priorities. The 5 V core and I/O simplify interfacing to legacy TTL/CMOS peripherals without level shifters.
Typical applications include PCI and ISA bus bridging, memory controllers, state-machine sequencing, address decoding, and glue logic consolidation in industrial and telecom equipment. The device is widely used as a drop-in replacement for discrete 74-series logic in existing 5 V designs.
When designing with the EPM9560RC240-10, note that it is a 5 V-only device - it cannot be used in 3.3 V or lower systems without level translation. Also confirm programming support: MAX 9000 devices require a compatible device programmer and the MAX+PLUS II toolchain, which is no longer actively developed by Intel/Altera.
This page synthesizes distributor availability, drop-in alternatives from the same MAX 9000 family, and practical design notes that go beyond the manufacturer datasheet, helping engineers evaluate the EPM9560RC240-10 for legacy and long-lifecycle designs.
Аналоги без доработки для EPM9560RC240-10 — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.
Варианты в этой серии
Модели той же серии, совместимые без доработки с EPM9560RC240-10 (тот же форм-фактор и посадочное место) — отличается по Package, RoHS Status, Device Type, Logic Array Blocks (LABs), Process Technology.
Инструмент быстрого сравнения — выберите альтернативные компоненты для сравнения бок о бок:
EPM9560ARC240-10
✅ Прямая замена✓ В наличии
$28.8 / шт.
Открыть даташит →EPM9560RC240-15
✅ Прямая замена✓ В наличии
$174.72 / шт.
Открыть даташит →EPM9560RC240-10N
✅ Прямая замена✓ В наличии
$168 / шт.
Открыть даташит →EPM9560ARI240-10
✅ Прямая замена✓ В наличии
Уточнить цену
Открыть даташит →EPM9560ARC240-10N
✅ Прямая замена✓ В наличии
$19.5 / шт.
Открыть даташит →EPM9480RC240-15
✅ Прямая замена✓ В наличии
$91.68 / шт.
Открыть даташит →EPM9560RC240-10 Максимальные параметры и электрические характеристики
| Device Type | Complex Programmable Logic Device (CPLD) |
| Family | MAX 9000 |
| Usable Gates | 12,000 gates |
| Macro Cells | 560 |
| Logic Array Blocks (LABs) | 12 |
| Maximum System Frequency | 144.9 MHz |
| Pin-to-Pin Propagation Delay | 10 ns |
| Напряжение питания | 5 V |
| Technology | CMOS EEPROM |
| Корпус | 240-pin RQFP (PowerQuad) |
| User I/O Pins | 192 |
| Тип монтажа | Surface Mount |
| Рабочая температура | 0C to +70C (commercial) |
| Уровень чувствительности к влаге (MSL) | 3 (168 Hours) |
| Статус RoHS | ROHS3 Compliant |
| Configuration Memory | Non-volatile EEPROM (instant-on) |
| Manufacturer Standard Lead Time | 1-7 Days (distributor stock) |
Руководство по цоколевке EPM9560RC240-10 в корпусе 240-pin rqfp (powerquad)
Цоколевка для EPM9560RC240-10 (корпус 240-pin rqfp (powerquad)). Эта цифровая ИС включает выводы GPIO, интерфейсы связи (UART, SPI, I2C) и выводы питания. Обратитесь к техническому описанию производителя для альтернативных функций выводов и вариантов конфигурации. Необходимо для проектирования встраиваемых систем и трассировки печатных плат.
Нет подробных данных о распиновке для EPM9560RC240-10.
Обратитесь к даташиту для полной конфигурации выводов.
Типичное применение
EPM9560RC240-10 подходит для 6 применениеs: PCI and ISA Bus Bridging, Industrial Control and Automation, Telecom Line Card Glue Logic, Legacy System Replacement and Repair, Memory Controller and Address Decoding, Test and Measurement Instrumentation.
PCI and ISA Bus Bridging
The EPM9560RC240-10 fits PCI and ISA bus-bridging designs because its 192 user I/O pins and 560 macro cells can implement full address/data/control bus interfaces without external glue logic. The 10 ns pin-to-pin delay supports the timing margins required by 33 MHz PCI and 8 MHz ISA buses, while the 5 V I/O matches legacy PCI/ISA signaling directly. In a typical bridge, the CPLD decodes addresses, generates chip selects, and handles wait-state logic between a host bus and peripheral devices. The non-volatile EEPROM configuration means the bridge is active immediately at power-up, avoiding the boot delay of SRAM-based FPGAs. A trade-off is that the 5 V-only operation limits use to legacy backplanes; modern 3.3 V PCI designs require level translation or a different CPLD family.
Рекомендуется
Industrial Control and Automation
In industrial control systems, the EPM9560RC240-10 implements state machines, sequencers, and I/O expansion logic that must operate deterministically and survive power cycling. Its 560 macro cells and 144.9 MHz system frequency handle multi-axis sequencing and safety interlock logic, while the 5 V CMOS EEPROM technology provides instant-on operation and high noise immunity on factory floors. The 240-pin RQFP package's 192 I/O pins allow direct connection to opto-isolators, relay drivers, and sensor interfaces without multiplexing. Because the configuration is non-volatile, the controller resumes its programmed state immediately after a power interruption, which is critical for machinery that cannot wait for FPGA configuration. The main design consideration is thermal: the RQFP package requires adequate copper area for heat dissipation in high-ambient industrial enclosures.
Рекомендуется
Telecom Line Card Glue Logic
Telecom line cards historically used the EPM9560RC240-10 for glue logic, timeslot interchange control, and HDLC framing support. The device's 560 macro cells can implement multiple protocol state machines, while the 192 I/O pins interface to backplane buses, framers, and line interface units. The 10 ns propagation delay supports the tight setup/hold windows of T1/E1 and SONET tributary interfaces, and the 5 V I/O matches the legacy telecom backplane levels. Non-volatile configuration is a key advantage in telecom equipment, where line cards must come online instantly after a hot-swap or power event. Engineers should verify that the MAX+PLUS II design files are available, since the toolchain is no longer actively maintained and migration to a newer CPLD may be required for new line-card designs.
Рекомендуется
Legacy System Replacement and Repair
The EPM9560RC240-10 is widely used as a replacement part in legacy system repair, where original MAX 9000 CPLDs have failed or been damaged. Because the device is non-volatile and pin-compatible with the EPM9560ARC240-10 and EPM9560RC240-10N variants, technicians can swap parts without redesigning the board or reprogramming the system. The 240-pin RQFP footprint is shared across the MAX 9000 9560 family, so inventory from multiple speed grades and temperature ranges can be used as substitutes. The main risk in repair applications is counterfeit parts: buyers should source from authorized distributors and verify markings. The 5 V operation also means the replacement must match the original supply rail exactly; substituting a 3.3 V CPLD would require board-level rework.
Рекомендуется
Memory Controller and Address Decoding
The EPM9560RC240-10 can implement memory controllers and address decoders for legacy SRAM, DRAM, and flash subsystems. Its 560 macro cells provide enough logic for refresh counters, wait-state generators, and bank-switching logic, while the 10 ns pin-to-pin delay keeps address decode paths fast enough for 5 V memory buses. The 192 I/O pins allow direct connection to address, data, and control lines without external buffers. Non-volatile EEPROM configuration ensures the memory controller is ready before the CPU releases reset, which is essential for boot-from-flash designs. A practical consideration is that the device's 5 V I/O must match the memory's logic levels; mixing 3.3 V memory with the EPM9560RC240-10 requires level shifters on the data bus, adding cost and propagation delay.
Рекомендуется
Test and Measurement Instrumentation
Test and measurement instruments use the EPM9560RC240-10 for trigger logic, timing generation, and front-panel interface control. The device's deterministic 10 ns propagation delay makes it suitable for trigger paths where jitter must be minimized, and the 144.9 MHz system frequency supports high-speed event counters. The 192 I/O pins can drive front-panel LEDs, read rotary encoders, and interface to measurement ASICs simultaneously. Because the configuration is non-volatile, the instrument boots directly into its operating state without a configuration PROM, simplifying the bill of materials. Engineers should note that the MAX 9000 family is obsolete, so new instrument designs should plan a migration path to a supported CPLD or small FPGA while using the EPM9560RC240-10 for existing production.
Рекомендуется
Сводка рекомендуемых товаров
Справочные инженерные данные для EPM9560RC240-10 — сравнение, рекомендации по проектированию и информация о соответствии.
Руководство по выбору
Сравнение с аналогами
| Параметр | Этот товар | EPM9560ARC240-10 | EPM9560RC240-15 | EPM9560RC240-10N | EPM9560ARI240-10 |
|---|---|---|---|---|---|
| Package | 240-pin RQFP | 240-pin RQFP - same | 240-pin RQFP - same | 240-pin RQFP - same | 240-pin RQFP - same |
| Brand | Altera | Altera | Altera | Altera | Altera |
| Macro Cells | 560 | 560 | 560 | 560 | 560 |
| Usable Gates | 12,000 | 12,000 | 12,000 | 12,000 | 12,000 |
| Pin-to-Pin Delay | 10 ns | 10 ns | 15 ns | 10 ns | 10 ns |
| Supply Voltage | 5 V | 5 V | 5 V | 5 V | 5 V |
| Operating Temperature | 0C to +70C (commercial) | 0C to +70C (commercial) | 0C to +70C (commercial) | 0C to +70C (commercial) | -40C to +85C (industrial) |
| RoHS Status | ROHS3 Compliant | ROHS3 Compliant | ROHS3 Compliant | ROHS3 Compliant (lead-free) | ROHS3 Compliant |
| Lifecycle Status | Obsolete | Active (DigiKey listed) | Obsolete | Obsolete | Obsolete |
Ключевые отличия
- Enhanced MAX 9000A variant available as drop-in (против EPM9560ARC240-10)
- Faster speed grade than -15 variants (против EPM9560RC240-15)
- Industrial temperature option in same footprint (против EPM9560ARI240-10)
Заметки по проектированию
The EPM9560RC240-10 requires a clean, well-regulated 5 V supply. Place a 0.1 uF ceramic decoupling capacitor on every VCC pin and a 10 uF bulk capacitor near the device. Because the device is a 5 V-only part, do not connect it to 3.3 V rails - doing so will cause unreliable operation or damage. Estimated: at 144.9 MHz with typical logic utilization, core current can reach several hundred milliamps, so size the regulator and copper traces accordingly.
The 240-pin RQFP package dissipates heat primarily through the PCB. Provide a solid ground plane under the device and use thermal vias to spread heat. Estimated: at 5 V and 300 mA core current, power dissipation is approximately 1.5 W; with a typical RQFP theta_JA of 30-40 C/W, junction temperature rise is 45-60 C above ambient. In enclosed industrial cabinets, forced airflow or a heatsink may be required to stay within the 70 C commercial limit.
The MAX 9000 family is obsolete and requires the MAX+PLUS II toolchain, which is no longer actively developed by Intel/Altera. Before committing to a design, confirm that you have a licensed copy of MAX+PLUS II and a compatible device programmer. Also verify that the JTAG or ISP programming header is accessible on the assembled board, since reprogramming an obsolete CPLD in-system may be the only way to update logic after production.
Информация о соответствии
ROHS3 Compliant per fpgalink.com listing. MSL 3 (168 Hours). REACH, halogen-free, and conflict-minerals status not stated in the provided data.
