ICS557M-01 - 100MHz PCIe Clock Source | Renesas Electronics
Артикул: ICS557M-01 ✓ АктивенICS557M-01 Обзор
The ICS557M-01 is an application-specific clock generator rather than a general-purpose microcontroller or power-management device. In the broader semiconductor hierarchy, it belongs to the clock and timing IC category, where PLL-based frequency generation is used to create stable, phase-aligned clock signals for high-speed interfaces. Its primary design function is to convert a reference clock or crystal into the differential 100 MHz clock used by PCI Express equipment.
Key characteristics include one clock-generation circuit, PLL support, clock or crystal input, HCSL and LVDS differential outputs, and a 1:1 input-to-output ratio according to the manufacturer-related product listings. The device is offered in an 8-pin SOIC package, making it suitable for compact PCI Express card designs where component count and board area are important. Differential output architecture helps preserve signal integrity across controlled-impedance PCB traces.
The ICS557M-01 is appropriate for PCI Express endpoint cards, add-in cards, embedded PCIe equipment, test systems, and industrial or communication equipment that requires a dedicated reference-clock source. It can simplify clock distribution by providing two differential outputs from one timing circuit. The exact electrical limits, operating-temperature range, output amplitude, jitter, and power-supply requirements should be confirmed against the current manufacturer datasheet before production release.
Layout quality is critical in any high-speed clock circuit. Place the device close to the clock-consuming circuitry, use controlled-impedance routing for differential pairs, keep the return path continuous, and minimize stubs and unnecessary vias. Decoupling capacitors should be positioned close to the supply pins according to the datasheet guidance.
This page combines the device’s documented PCI Express purpose, package information, interface characteristics, sourcing guidance, and engineering-oriented design notes to support component selection and board-level implementation.
Аналоги без доработки для ICS557M-01 — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.
ICS557M-01LF
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
ICS557M-01T
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
ICS557M-01 Характеристики
| Device Type | Clock/Frequency Generator IC |
| Primary Application | PCI Express (PCIe) clock source |
| Output Frequency | 100 MHz |
| Number of Circuits | 1 |
| PLL | Yes |
| Input | Clock, Crystal |
| Output | HCSL, LVDS |
| Differential Outputs | Pair |
| Input-to-Output Ratio | 1:1 |
| Корпус | 8-pin SOIC |
| Тип монтажа | Surface mount |
| Output Description | 100 MHz differential clock outputs |
| Clock Source Function | PCI Express reference-clock generation |
| PLL Technique | Phase-locked loop |
Руководство по цоколевке ICS557M-01 в корпусе 8-pin soic
Цоколевка для ICS557M-01 (корпус 8-pin soic). Нумерация выводов, функции и схемы подключения определены в техническом описании производителя. Обратитесь к нему для точного посадочного места и рекомендаций по пайке.
Нет подробных данных о распиновке для ICS557M-01.
Обратитесь к даташиту для полной конфигурации выводов.
Типичное применение
ICS557M-01 подходит для 6 применениеs: PCI Express Endpoint Add-In Cards, PCI Express Embedded Systems, PCIe Graphics and Acceleration Cards, Industrial PCIe Communication Equipment, PCIe Test and Measurement Platforms, PCIe Storage and Network Adapter Cards.
PCI Express Endpoint Add-In Cards
The ICS557M-01 fits PCI Express endpoint cards that require a local 100 MHz reference clock and differential clock distribution. Its PLL-based architecture accepts a clock or crystal input and provides a pair of differential outputs, which can simplify clock planning on a compact add-in card. Place the generator near the PCIe interface circuitry and route the outputs as controlled-impedance differential pairs. The principal design checks are clock jitter, output amplitude, supply decoupling, termination, and compliance with the PCIe interface requirements of the specific card.
Рекомендуется
PCI Express Embedded Systems
The ICS557M-01 is useful in embedded PCI Express equipment where a system-level clock is not distributed directly to every interface. The 100 MHz differential output arrangement gives the board designer a dedicated clock source for a PCIe endpoint or switch-facing circuit. Because high-speed clock integrity depends on the physical implementation, use short matched traces, a continuous reference plane, and manufacturer-recommended supply bypassing. Validate startup, steady-state jitter, and clock-to-data timing margins under the expected load and temperature conditions.
Рекомендуется
PCIe Graphics and Acceleration Cards
Graphics, compute, and accelerator cards can use the ICS557M-01 as a dedicated PCI Express clock source when the design requires a stable 100 MHz reference close to the interface circuitry. The single-circuit implementation reduces the number of discrete timing components needed for a straightforward clock-generation function. The 8-pin SOIC package also supports compact layouts, provided the clock outputs are routed with suitable impedance control and termination. Designers should confirm the device’s operating limits and clock-quality requirements against the selected accelerator and PCIe platform.
Рекомендуется
Industrial PCIe Communication Equipment
The ICS557M-01 can support industrial PCI Express communication equipment that needs a local differential clock reference. A dedicated generator allows the clock source to remain close to the interface section rather than depending on a long system-level distribution path. Industrial equipment should be evaluated for temperature, supply variation, electromagnetic compatibility, and long-term availability. Keep the oscillator or crystal and PLL supply network clean, use grounded return paths, and verify clock performance across the equipment’s environmental operating range.
Рекомендуется
PCIe Test and Measurement Platforms
Instrumentation and test platforms containing PCI Express interfaces can benefit from the ICS557M-01 when repeatable local clock generation is preferable to a distributed reference. The 100 MHz differential output is aligned with the part’s stated PCI Express clock-source purpose and can support predictable stimulus timing around the interface under test. Instrument designers should still characterize jitter, supply-noise coupling, and startup behavior with their particular backplane or DUT. The clock generator should be isolated from noisy power-conversion stages and positioned close to the receiving circuitry.
Рекомендуется
PCIe Storage and Network Adapter Cards
The ICS557M-01 is applicable to PCI Express storage and network adapter designs that require a dedicated 100 MHz clock source for interface timing. Its differential outputs suit controlled-impedance routing in multilayer PCBs, while the 8-pin SOIC format keeps the footprint compact. The implementation should account for the difference between the clock’s nominal frequency and the quality seen by the receiver, including jitter and supply-noise effects. Confirm termination values, output configuration, and startup requirements against the current manufacturer datasheet before releasing the layout.
Рекомендуется
Сводка рекомендуемых товаров
Справочные инженерные данные для ICS557M-01 — сравнение, рекомендации по проектированию и информация о соответствии.
Руководство по выбору
Сравнение с аналогами
| Параметр | Этот товар | ICS557M-01LF | ICS557M-01T |
|---|---|---|---|
| Package | 8-pin SOIC | 8-pin SOIC | 8-pin SOIC |
| Brand | Renesas Electronics | Renesas Electronics | Renesas Electronics |
| Device Type | Clock/Frequency Generator IC | PCI-Express clock source | Clock/Frequency Generator IC |
| Primary Purpose | PCI Express clock source | PCI-Express clock source | PCI Express (PCIe) |
Ключевые отличия
- Purpose-built PCI Express clock-source function (против ICS557M-01LF)
- Single-circuit differential output architecture (против ICS557M-01T)
- Compact 8-pin SOIC implementation (против ICS557M-01LF)
Заметки по проектированию
Place the ICS557M-01 close to the PCIe clock receiver and route both differential outputs as a matched, controlled-impedance pair. Avoid long stubs, unmatched trace lengths, and unnecessary layer changes. Maintain a continuous reference plane beneath the pair so that the receiver sees consistent impedance and reduced common-mode disturbance.
Use the manufacturer-recommended supply bypass network and place the decoupling capacitor immediately across the appropriate supply and ground pins. Clock-generator performance can be affected by supply noise even when the nominal 100 MHz output frequency is correct. Validate the rail at the device pins with suitable high-frequency probing and keep noisy converters and switching nodes physically separated from the clock circuitry.
Do not select a replacement based only on the 100 MHz label or the 8-pin SOIC footprint. The replacement must also match the pin assignment, input architecture, differential output standard, output amplitude, voltage levels, jitter, termination requirements, and operating-temperature range. Use the exact manufacturer ordering information when distinguishing ICS557M-01 suffix variants.
Treat the differential clock as a high-speed signal rather than a generic low-frequency clock line. Check differential impedance, pair spacing, return-path continuity, connector or via transitions, and receiver termination. Also evaluate startup behavior and clock-to-data timing margin in the final board because nominal frequency alone does not establish PCIe timing compliance.
Информация о соответствии
The verified product material does not state compliance qualification for the exact ICS557M-01 ordering code. Confirm current environmental and quality declarations with the manufacturer.