Renesas Electronics

ICS557M-01 - 100MHz PCIe Clock Source | Renesas Electronics

MPN: ICS557M-01 ✓ Nakahanda
8-pin SOIC Package 100 MHz Speed
MOQ: 1 |

ICS557M-01 Ulas

Renesas Electronics ICS557M-01 is a PCI Express clock and frequency generator integrated circuit with PLL-based clocking, a 100 MHz differential output, and HCSL/LVDS-compatible signaling. It is designed to provide the reference clock required by PCI Express cards and related high-speed digital systems. The device uses a clock or crystal input and produces a pair of differential outputs, allowing it to support common PCIe clock-source architectures while reducing the number of separate timing components required on the board.

The ICS557M-01 is an application-specific clock generator rather than a general-purpose microcontroller or power-management device. In the broader semiconductor hierarchy, it belongs to the clock and timing IC category, where PLL-based frequency generation is used to create stable, phase-aligned clock signals for high-speed interfaces. Its primary design function is to convert a reference clock or crystal into the differential 100 MHz clock used by PCI Express equipment.

Key characteristics include one clock-generation circuit, PLL support, clock or crystal input, HCSL and LVDS differential outputs, and a 1:1 input-to-output ratio according to the manufacturer-related product listings. The device is offered in an 8-pin SOIC package, making it suitable for compact PCI Express card designs where component count and board area are important. Differential output architecture helps preserve signal integrity across controlled-impedance PCB traces.

The ICS557M-01 is appropriate for PCI Express endpoint cards, add-in cards, embedded PCIe equipment, test systems, and industrial or communication equipment that requires a dedicated reference-clock source. It can simplify clock distribution by providing two differential outputs from one timing circuit. The exact electrical limits, operating-temperature range, output amplitude, jitter, and power-supply requirements should be confirmed against the current manufacturer datasheet before production release.

Layout quality is critical in any high-speed clock circuit. Place the device close to the clock-consuming circuitry, use controlled-impedance routing for differential pairs, keep the return path continuous, and minimize stubs and unnecessary vias. Decoupling capacitors should be positioned close to the supply pins according to the datasheet guidance.

This page combines the device’s documented PCI Express purpose, package information, interface characteristics, sourcing guidance, and engineering-oriented design notes to support component selection and board-level implementation.

Mga alternatibo na pwedeng ilagay na ICS557M-01 — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.

ICS557M-01LF

✅ Drop-In
📦 8-pin SOIC
Related ordering variant; exact electrical and temperature differences are not specified in the verified material

📋 Alternatibo na Reference (hindi sa katalogo)

ICS557M-01T

✅ Drop-In
📦 8-pin SOIC
Related ordering variant with likely different shipping or reel configuration; electrical differences are not specified

📋 Alternatibo na Reference (hindi sa katalogo)

ICS557M-01 Mga Spesipikasyon

Device Type Clock/Frequency Generator IC
Primary Application PCI Express (PCIe) clock source
Output Frequency 100 MHz
Number of Circuits 1
PLL Yes
Input Clock, Crystal
Output HCSL, LVDS
Differential Outputs Pair
Input-to-Output Ratio 1:1
Packhaging 8-pin SOIC
Uri ng Pagpapasok Surface mount
Output Description 100 MHz differential clock outputs
Clock Source Function PCI Express reference-clock generation
PLL Technique Phase-locked loop

Gabay sa Pin Configuration ng ICS557M-01 8-pin soic

Pin configuration para sa ICS557M-01 (8-pin soic package). Ang pagnunumero ng pin, mga function, at connection diagram ay tinukoy sa datasheet ng manufacturer. Sumangguni dito para sa eksaktong footprint at mga alituntunin sa soldering.

Pinout diagram ng 8-pin soic package para sa ICS557M-01

Wala ng detalyadong pinout data na magagamit para sa ICS557M-01.

Sumangguni sa datasheet para sa buong pin configuration.

Tipikal na mga Gamit

ICS557M-01 ay nararapat para sa 6 aplikasyons: PCI Express Endpoint Add-In Cards, PCI Express Embedded Systems, PCIe Graphics and Acceleration Cards, Industrial PCIe Communication Equipment, PCIe Test and Measurement Platforms, PCIe Storage and Network Adapter Cards.

🖥️

PCI Express Endpoint Add-In Cards

The ICS557M-01 fits PCI Express endpoint cards that require a local 100 MHz reference clock and differential clock distribution. Its PLL-based architecture accepts a clock or crystal input and provides a pair of differential outputs, which can simplify clock planning on a compact add-in card. Place the generator near the PCIe interface circuitry and route the outputs as controlled-impedance differential pairs. The principal design checks are clock jitter, output amplitude, supply decoupling, termination, and compliance with the PCIe interface requirements of the specific card.

🏭

PCI Express Embedded Systems

The ICS557M-01 is useful in embedded PCI Express equipment where a system-level clock is not distributed directly to every interface. The 100 MHz differential output arrangement gives the board designer a dedicated clock source for a PCIe endpoint or switch-facing circuit. Because high-speed clock integrity depends on the physical implementation, use short matched traces, a continuous reference plane, and manufacturer-recommended supply bypassing. Validate startup, steady-state jitter, and clock-to-data timing margins under the expected load and temperature conditions.

🖥️

PCIe Graphics and Acceleration Cards

Graphics, compute, and accelerator cards can use the ICS557M-01 as a dedicated PCI Express clock source when the design requires a stable 100 MHz reference close to the interface circuitry. The single-circuit implementation reduces the number of discrete timing components needed for a straightforward clock-generation function. The 8-pin SOIC package also supports compact layouts, provided the clock outputs are routed with suitable impedance control and termination. Designers should confirm the device’s operating limits and clock-quality requirements against the selected accelerator and PCIe platform.

🌐

Industrial PCIe Communication Equipment

The ICS557M-01 can support industrial PCI Express communication equipment that needs a local differential clock reference. A dedicated generator allows the clock source to remain close to the interface section rather than depending on a long system-level distribution path. Industrial equipment should be evaluated for temperature, supply variation, electromagnetic compatibility, and long-term availability. Keep the oscillator or crystal and PLL supply network clean, use grounded return paths, and verify clock performance across the equipment’s environmental operating range.

🔧

PCIe Test and Measurement Platforms

Instrumentation and test platforms containing PCI Express interfaces can benefit from the ICS557M-01 when repeatable local clock generation is preferable to a distributed reference. The 100 MHz differential output is aligned with the part’s stated PCI Express clock-source purpose and can support predictable stimulus timing around the interface under test. Instrument designers should still characterize jitter, supply-noise coupling, and startup behavior with their particular backplane or DUT. The clock generator should be isolated from noisy power-conversion stages and positioned close to the receiving circuitry.

🌐

PCIe Storage and Network Adapter Cards

The ICS557M-01 is applicable to PCI Express storage and network adapter designs that require a dedicated 100 MHz clock source for interface timing. Its differential outputs suit controlled-impedance routing in multilayer PCBs, while the 8-pin SOIC format keeps the footprint compact. The implementation should account for the difference between the clock’s nominal frequency and the quality seen by the receiver, including jitter and supply-noise effects. Confirm termination values, output configuration, and startup requirements against the current manufacturer datasheet before releasing the layout.

What is the ICS557M-01 used for?
The ICS557M-01 is a PCI Express clock and frequency generator IC used as a dedicated 100 MHz clock source for PCIe cards and related high-speed equipment. According to the manufacturer-related product descriptions, it accepts a clock or crystal input and uses PLL technology to generate a pair of differential outputs. This makes it useful when the system requires a local reference clock rather than routing a system clock across a larger board.
What are the key specifications of ICS557M-01?
The ICS557M-01 is a single-circuit PLL-based clock generator with a 100 MHz output, clock or crystal input, HCSL/LVDS differential outputs, and a 1:1 input-to-output ratio. It is identified for PCI Express clock-source use and is packaged in an 8-pin SOIC. The exact voltage, temperature, jitter, and output-amplitude limits should be taken from the current manufacturer datasheet.
Is ICS557M-01 an LVDS clock generator?
Yes. The ICS557M-01 is described as supporting HCSL and LVDS differential outputs for a PCI Express clock-source application. The output architecture provides a pair of differential signals at 100 MHz. Signal amplitude, termination, voltage levels, and exact output configuration must be checked against the device’s electrical characteristics before connecting it to a specific receiver.
Where can I download the ICS557M-01 datasheet PDF?
The ICS557M-01 datasheet PDF is available through the manufacturer-related PDF link listed on this page and through the product documentation references for the integrated clock source. The documentation identifies the part as a PCI-Express clock source and describes its 100 MHz differential output operation. Use the latest document revision when making production design decisions, especially for electrical limits and pin assignments.
Where can I find the ICS557M-01 pinout?
The authoritative ICS557M-01 pinout is the pin-description and package-outline information in the manufacturer datasheet. The device uses an 8-pin SOIC package, but the verified product material does not include a complete numbered pin list. Therefore, consult the datasheet pin table before assigning supply, ground, input, and differential-output connections; do not infer individual pin numbers from the package name alone.
Can ICS557M-01 replace a generic 100 MHz oscillator?
Not automatically. A generic oscillator may provide a single-ended or differential signal, while the ICS557M-01 is a PLL-based PCI Express clock source with clock or crystal input and a pair of differential outputs. Replacement requires matching the package, pinout, output topology, voltage, frequency, jitter, and termination requirements. Use the manufacturer cross-reference process for a qualified replacement decision.
What can replace ICS557M-01?
A valid replacement for ICS557M-01 must be pin-compatible in the 8-pin SOIC footprint and provide compatible PCI Express clock behavior, differential outputs, frequency, voltage, and termination characteristics. The verified cross-reference results do not identify a specific drop-in substitute, so engineers should use the Renesas cross-reference tool and compare the complete manufacturer datasheet before approving a replacement.
Is ICS557M-01 the same as ICS557M-01LF?
ICS557M-01 and ICS557M-01LF are listed as related clock-source variants, but the verified material does not establish that every electrical and commercial attribute is identical. The LF designation may reflect ordering or packaging information, so the manufacturer ordering guide and datasheet must be checked to confirm lead finish, temperature grade, and shipping form. Do not treat the suffix difference alone as proof of drop-in equivalence.
What is the difference between ICS557M-01 and ICS557M-01T?
The verified listings identify ICS557M-01T as a related ICS557M-01 variant, but they do not provide a complete technical comparison of the two ordering codes. The suffix may affect tape-and-reel or other ordering characteristics rather than the core PCI Express clock function. Confirm the exact package, pinout, temperature grade, and lifecycle status in the manufacturer ordering information before substitution.
Is ICS557M-01 suitable for a PCIe add-in card?
Yes, the ICS557M-01 is specifically described as a clock source for PCI Express cards and provides 100 MHz differential outputs. It can support a board architecture where the PCIe interface requires a dedicated reference clock. The implementation still requires controlled-impedance routing, correct differential termination, supply decoupling, and verification against the card’s PCIe clock requirements.
How should the ICS557M-01 be placed on a PCB?
Place the ICS557M-01 close to the PCIe receiver or clock-consuming circuitry and route the differential output as a controlled-impedance pair. Avoid long stubs, unnecessary vias, and splits between the differential traces, while maintaining a continuous reference plane. Follow the manufacturer’s recommended input, output, supply, and decoupling arrangements from the datasheet for the final board implementation.
Where can I buy ICS557M-01 and request a quote?
Use the Request a Quote form on this page to request current ICS557M-01 availability, packaging, lead time, and commercial terms. The verified product listings identify the part as an 8-SOIC PCI Express clock generator, but they do not provide a qualifying quantity-break price table. A quote request avoids presenting stale pricing or an unverified stock claim.
What is the lead time for ICS557M-01?
The current lead time for ICS557M-01 should be confirmed through the Request a Quote form on this page. The verified product listings establish the device’s identity and package but do not state a current factory lead time, minimum order quantity, or stock status. For production planning, request the quantity, package, and delivery schedule that applies to the current manufacturer channel.
Is ICS557M-01 in stock?
Current stock status for ICS557M-01 is not established by the verified product material. Use the Request a Quote form on this page to request availability for the required quantity and packaging. The product listing indicates that the part is associated with an 8-SOIC package, but it does not authorize a claim that inventory is immediately available.
How does the ICS557M-01 PLL affect PCIe clock quality?
The ICS557M-01 uses PLL technology to derive its PCI Express clock output from a clock or crystal input. PLL-based generation allows the device to organize and distribute the reference signal, but final signal quality depends on input-referral noise, loop behavior, output jitter, power supply quality, and PCB implementation. Consult the manufacturer’s jitter and power-supply specifications when performing PCIe compliance or margin analysis.
Does ICS557M-01 support RoHS and AEC-Q100 applications?
The verified product information does not state the ICS557M-01 RoHS or AEC-Q100 status, so neither qualification should be assumed. Check the current manufacturer product page, datasheet, and quality documentation for the exact ordering code and application requirements. For automotive designs, use only a part that the manufacturer explicitly identifies as AEC-Q100 qualified.
What is the best Renesas equivalent for ICS557M-01?
The best Renesas equivalent is the manufacturer-approved cross-reference result for ICS557M-01, not a part selected only because it also generates 100 MHz. The verified cross-reference material points to Renesas’ official cross-reference tool but does not name a substitute MPN. Compare package, pinout, differential-output format, PLL requirements, voltage, jitter, operating temperature, and lifecycle status before using any alternative.

Impormasyon ng Talumpati sa Engineering for ICS557M-01 — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.

Paunawang Hanapin

Choose ICS557M-01 for a PCI Express design that requires a dedicated PLL-based 100 MHz clock source with differential HCSL/LVDS outputs and an 8-pin SOIC footprint. It is a strong fit for endpoint cards, embedded PCIe equipment, and test platforms where local clock generation simplifies distribution. ICS557M-01LF and ICS557M-01T are the only related same-brand variants identified, so verify their ordering suffix, temperature grade, packaging, and electrical data before using either as a substitute. If your design needs a different frequency, output standard, package, or input architecture, choose a dedicated clock generator instead of assuming generic 100 MHz parts are interchangeable. For any board-level release, confirm the latest manufacturer datasheet, validate the complete pin assignment, and test jitter, startup, supply noise, and receiver timing margin in the finished PCB.

Ikabit sa Mga Alternatibo

Parametro Ito ang Producto ICS557M-01LF ICS557M-01T
Package 8-pin SOIC 8-pin SOIC 8-pin SOIC
Brand Renesas Electronics Renesas Electronics Renesas Electronics
Device Type Clock/Frequency Generator IC PCI-Express clock source Clock/Frequency Generator IC
Primary Purpose PCI Express clock source PCI-Express clock source PCI Express (PCIe)

Pangunahing mga Pagkakaiba

  • Purpose-built PCI Express clock-source function (kumpara saICS557M-01LF)
  • Single-circuit differential output architecture (kumpara saICS557M-01T)
  • Compact 8-pin SOIC implementation (kumpara saICS557M-01LF)

Talaan ng Disenyo

Place the ICS557M-01 close to the PCIe clock receiver and route both differential outputs as a matched, controlled-impedance pair. Avoid long stubs, unmatched trace lengths, and unnecessary layer changes. Maintain a continuous reference plane beneath the pair so that the receiver sees consistent impedance and reduced common-mode disturbance.

Use the manufacturer-recommended supply bypass network and place the decoupling capacitor immediately across the appropriate supply and ground pins. Clock-generator performance can be affected by supply noise even when the nominal 100 MHz output frequency is correct. Validate the rail at the device pins with suitable high-frequency probing and keep noisy converters and switching nodes physically separated from the clock circuitry.

Do not select a replacement based only on the 100 MHz label or the 8-pin SOIC footprint. The replacement must also match the pin assignment, input architecture, differential output standard, output amplitude, voltage levels, jitter, termination requirements, and operating-temperature range. Use the exact manufacturer ordering information when distinguishing ICS557M-01 suffix variants.

Treat the differential clock as a high-speed signal rather than a generic low-frequency clock line. Check differential impedance, pair spacing, return-path continuity, connector or via transitions, and receiver termination. Also evaluate startup behavior and clock-to-data timing margin in the final board because nominal frequency alone does not establish PCIe timing compliance.

Impormasyon ng Pagsunod sa Kautusan

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Walang Lead
Unknown
Walang Halogen
Unknown
Mga Conflict Mineral
Unknown

The verified product material does not state compliance qualification for the exact ICS557M-01 ordering code. Confirm current environmental and quality declarations with the manufacturer.

Data napatotohanan sa: 2026-11-11 — impormasyon na pinatunayan at pinapatakbo ng pangkat ng engineering ng XAIPART's component engineering team

Kaugnay na Hanapin

ICS557M-01 datasheet ICS557M-01 pinout ICS557M-01 datasheet pdf ICS557M-01 100MHz clock ICS557M-01 PCI Express clock source ICS557M-01 equivalent ICS557M-01 replacement ICS557M-01 vs ICS557M-01T ICS557M-01 8-SOIC Renesas ICS557M-01 ICS557M-01 price ICS557M-01 stock

Mga kaugnay na Mga Komponente at mga Tuntunin

Renesas Electronics ICS557M-01 ICS557M-01LF ICS557M-01T clock generator clock and timing IC frequency generator phase-locked loop PLL PCI Express PCIe clock source 100 MHz differential clock HCSL LVDS clock input crystal input output jitter differential signaling controlled-impedance routing 8-pin SOIC surface-mount package semiconductor embedded systems industrial electronics
Mabilis na Tanggap na RFQ
Ihanda ang buong detalye — ang aming pangkalakal na koponan ay tutugon sa loob ng 24 oras
Numero ng Parte Mga Tagagawa Pakete QTY Target na Halaga Pinalawak
✓
Quote na inilabas!

Ating tumugon sa iyong email sa loob ng 24 oras

1
RFQ Naisumite
2
Received na ang Kwaliksik
3
Nai-order
4
Pagbabayad
5
Inihanda
6
Naihanda
Tingnan ang Detalye ng RFQ