Texas Instruments

INA129UAG4 - 1.3MHz Precision Instrumentation Amp | Texas Instruments

Артикул: INA129UAG4 ✓ Активен
25 µV typical Vdss 5 nA typical Id 8-SOIC, 0.154 inch width, 3.90 mm body width Package
MOQ: 1 |

INA129UAG4 Обзор

The Texas Instruments INA129UAG4 is a low-power precision instrumentation amplifier with a 1.3 MHz gain-bandwidth product, designed for accurate differential-signal amplification. The device operates from a single supply of at least 1.8 V, accepts input signals up to ±40 V with internal protection, and is packaged in an 8-pin SOIC. Its three-op-amp architecture and current-feedback input stage provide wide bandwidth at high gain, reaching 200 kHz at a gain of 100.

An instrumentation amplifier is a specialized amplifier that combines differential input measurement, high input impedance, accurate gain setting, and excellent common-mode rejection. This places the INA129 within the broader hierarchy of operational amplifiers, analog signal-conditioning ICs, and power-management-aware semiconductor components. The INA12x family is designed for sensor interfaces and industrial instrumentation where small differential signals must be measured in the presence of much larger common-mode voltages.

The INA129UAG4 combines a broad usable gain range with low power consumption and internal input protection. Its typical input offset voltage is 25 µV, while input bias current is typically 5 nA. The low offset and bias values help preserve measurement accuracy in high-impedance sensing circuits. A gain of 100 supports 200 kHz bandwidth, allowing the amplifier to handle measurements beyond static DC while retaining useful signal bandwidth.

The device uses a three-op-amp topology and an external gain-setting resistor. This approach supports gains from 1 to 10,000 while simplifying the circuit compared with a discrete three-amplifier implementation. The input circuitry uses a current-feedback architecture, which maintains bandwidth at higher closed-loop gains where a conventional voltage-feedback amplifier can become bandwidth-limited.

Typical applications include bridge and strain-gauge sensor front ends, low-current measurements, laboratory instrumentation, biomedical signal acquisition, and industrial process-control inputs. The ±40 V internal input protection is especially useful when a sensor line may experience transients beyond the normal low-voltage operating range. The compact SOIC-8 package supports conventional surface-mount assembly and requires no external protection components for the stated input limits.

PCB design should keep the gain resistor close to pin 8 to minimize parasitic resistance and preserve gain accuracy. Input and reference connections should be routed away from switching nodes and high-current return paths. Because instrumentation amplifiers reject common-mode voltage rather than gain error, the reference pin must be driven cleanly and decoupled when a nonzero output offset is required.

This product page combines electrical characteristics, replacement guidance, package details, and application-oriented design guidance to accelerate sensor-front-end evaluation and PCB implementation.

Аналоги без доработки для INA129UAG4 — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.

Варианты в этой серии

Модели той же серии, совместимые без доработки с INA129UAG4 (тот же форм-фактор и посадочное место) — отличается по Package, Input Bias Current, Input Offset Voltage, Operating Temperature Range, Amplifier Type.

Analog Devices
Package: 8-SOIC (0.154", 3.90mm Width)
Input Bias Current: 1.0 nA
Input Offset Voltage: 50 µV
Сравнить с INA129UAG4 →
Texas Instruments
Package: 8-pin SOIC
Сравнить с INA129UAG4 →
Texas Instruments
Package: 8-pin SOIC (D)
Input Bias Current: 5 nA maximum
Input Offset Voltage: 50 µV maximum
Сравнить с INA129UAG4 →

INA129U

✅ Прямая замена
Texas Instruments
📦 8-SOIC
Precision, low-power instrumentation amplifier · Three-op-amp instrumentation amplifier · ±2.25 V to ±18 V · ±18 V · 1.3 MHz · 200 kHz · 50 µV · 0.5 µV/°C

Уточнить цену

Открыть даташит →

INA129UA

✅ Прямая замена
Texas Instruments
📦 8-SOIC
Precision instrumentation amplifier · 1 circuit · 50 µV maximum · 0.5 µV/°C maximum · 5 nA maximum · 120 dB minimum · ±40 V · ±18 V maximum

Уточнить цену

Открыть даташит →

INA129UA/2K5

✅ Прямая замена
📦 8-SOIC
Same INA129UA electrical configuration in a 2,500-piece order quantity; no change to the 8-SOIC footprint is indicated.

📋 Справочный аналог (нет в каталоге)

INA128UAG4

✅ Прямая замена ⚠️ Характеристики не проверены
📦 8-SOIC
Same INA12x three-op-amp family and 8-SOIC footprint; gain, offset, and supply ratings differ by family variant and must be checked before substitution.

📋 Справочный аналог (нет в каталоге)

AD620ARZ

✅ Прямая замена
Analog Devices
📦 8-SOIC
Instrumentation Amplifier · 1 · 1 to 10,000 · ±2.3 V to ±18 V · 1.3 mA · 100 dB · 50 µV · 1.0 nA

Уточнить цену

Открыть даташит →

INA129UAG4 Максимальные параметры и электрические характеристики

Amplifier Type Precision instrumentation amplifier
Number of Circuits 1 circuit
Gain-Bandwidth Product 1.3 MHz
Bandwidth at Gain 100 200 kHz
Gain Range 1 to 10,000
Input Offset Voltage 25 µV typical
Input Bias Current 5 nA typical
Input Protection Range ±40 V
Minimum Supply Voltage 1.8 V
Диапазон рабочих температур -40°C to +85°C
Корпус 8-SOIC, 0.154 inch width, 3.90 mm body width
Тип монтажа Surface mount
Architecture Three-op-amp with current-feedback input circuitry
Gain Setting External resistor

Конфигурация выводов INA129UAG4

SOIC-8 Package Pinout Diagram SOIC-8 8-pin small outline IC, 3.9x4.9mm, P1.27mm, JEDEC MS-012. 1 8 2 7 3 6 4 5 SOIC-8
Контакт 1 RG — Gain resistor connection
Контакт 2 IN- — Inverting input
Контакт 3 IN+ — Noninverting input
Контакт 4 V- — Negative supply connection
Контакт 5 REF — Reference input
Контакт 6 OUT — Amplified output
Контакт 7 V+ — Positive supply connection
Контакт 8 RG — Gain resistor connection

Типичное применение

INA129UAG4 подходит для 6 применениеs: Strain-Gauge Bridge Front End, Low-Current Sensor Measurement, Biomedical Signal Acquisition, Industrial Process Monitoring, Laboratory Instrumentation, Battery-Powered Sensor Node.

🏭

Strain-Gauge Bridge Front End

The INA129UAG4 is well suited to differential bridge outputs because its three-op-amp architecture provides accurate gain, low 25 µV typical input offset, and 5 nA typical input bias current. Designers can set the closed-loop gain with an external resistor and obtain 200 kHz bandwidth at a gain of 100. This combination supports static load-cell measurements while retaining useful bandwidth for transient loading. The ±40 V internal input protection adds robustness when the bridge is connected through long industrial wiring. The reference pin should remain well decoupled, and the gain resistor should be placed directly beside pin 8 to minimize gain error.

⚡

Low-Current Sensor Measurement

For low-current sensors, the INA129UAG4 combines a 5 nA typical input bias current with gains up to 10,000, allowing small differential currents to be raised to a measurable voltage level. Its low-power instrumentation-amplifier architecture is preferable to assembling several discrete precision amplifiers in a sensitive measurement channel. Gain-related error should be controlled with a suitable external resistor and clean reference connection. The 1.3 MHz gain-bandwidth product provides design margin when moderate signal bandwidth is required, while the 8-pin SOIC keeps the analog front end compact.

💊

Biomedical Signal Acquisition

The INA129UAG4 can amplify small differential signals in biomedical acquisition systems when the electrode or sensor interface meets its common-mode and input-range limits. The 25 µV typical offset and 5 nA typical bias current are relevant to low-level physiological measurements, while the three-op-amp topology reduces the number of separate precision amplifier stages required. Input protection up to ±40 V improves tolerance of transient events, although protection does not replace isolation or patient-safety circuitry. Designers should verify electrode bias, ground strategy, input filtering, and compliance requirements in the complete medical system.

🏭

Industrial Process Monitoring

The INA129UAG4 fits process-monitoring channels that measure a small differential signal riding on a substantially larger common-mode voltage. Its instrumentation-amplifier configuration supports accurate gain control, while the 200 kHz bandwidth at gain 100 accommodates signals beyond DC without requiring the higher power and complexity of a discrete analog front end. The wide supply compatibility and ±40 V input protection can simplify connections to industrial sensor lines. Designers should still add appropriate filtering, surge protection, and grounding appropriate to the installation environment rather than relying on input protection as a complete surge solution.

🔧

Laboratory Instrumentation

Laboratory instruments benefit from the INA129UAG4's ability to amplify small differential signals while rejecting common-mode voltage. Its programmable gain of 1 to 10,000 allows the same input stage to serve several measurement ranges, and the external gain resistor keeps the circuit straightforward to recalibrate or adapt. The 1.3 MHz gain-bandwidth product supports higher-bandwidth measurements, while the 8-pin SOIC package simplifies replacement and standardization across instrument channels. For precision bench equipment, add input filtering, account for resistor tolerance, and use a low-noise reference arrangement.

🔋

Battery-Powered Sensor Node

The INA129UAG4's low-power design is useful in battery-powered sensor nodes that must resolve a small differential signal without continuously operating a high-bandwidth amplifier. The minimum 1.8 V supply permits integration with low-voltage sensor and processing platforms, while the SOIC-8 package supports compact assembly. Its 1.3 MHz gain-bandwidth product provides flexibility when the required measurement bandwidth is modest but nonzero. Energy use should be evaluated across the complete acquisition cycle, including the analog front end, ADC, processor, and any reference or filtering components.

What is the INA129UAG4?
The INA129UAG4 is a Texas Instruments precision instrumentation amplifier designed for low-level differential-signal measurement. According to the manufacturer product information, it provides a 1.3 MHz gain-bandwidth product, accepts gains from 1 to 10,000, and operates in an 8-pin SOIC package. Its three-op-amp architecture and current-feedback input stage make it suitable for bridge sensors, industrial transducers, biomedical instrumentation, and other applications requiring high common-mode rejection.
What is the gain-bandwidth product of INA129UAG4?
The INA129UAG4 has a gain-bandwidth product of 1.3 MHz. The manufacturer describes the INA129 as maintaining a bandwidth of 200 kHz at a gain of 100 because it uses current-feedback input circuitry. This bandwidth advantage is important when the closed-loop gain would otherwise reduce the usable signal range of a conventional voltage-feedback amplifier.
What supply voltage does INA129UAG4 require?
The INA129UAG4 requires a minimum supply voltage of 1.8 V. According to the manufacturer documentation, the INA12x instrumentation-amplifier family supports low-voltage operation suitable for portable measurement systems and low-power sensor equipment. The exact maximum supply voltage and current-consumption limits should be checked against the complete manufacturer datasheet before finalizing a power-supply design.
Can INA129UAG4 tolerate input voltages up to ±40 V?
Yes. The INA129UAG4 has internal input protection that can withstand input voltages up to ±40 V without damage, according to the manufacturer documentation. This rating concerns input survivability rather than the normal signal range for amplification. Designers must still confirm the device’s input common-mode range, supply voltage, output swing, and electrical limits for the operating conditions of the particular circuit.
Where can I download the INA129UAG4 datasheet PDF?
The official INA129UAG4 datasheet is available from Texas Instruments at https://www.ti.com/lit/gpn/ina129. The document contains the authoritative pin descriptions, gain-setting relationship, electrical characteristics, typical application circuits, and recommended operating conditions. Use the manufacturer copy for design sign-off, especially when confirming the complete supply range, common-mode limits, output swing, and package details.
Where is the INA129UAG4 pinout?
The INA129UAG4 uses an 8-pin SOIC with gain resistor, differential inputs, supply pins, reference input, and output assigned to pins 1 through 8. The manufacturer pin-description table is the authoritative source for PCB layout. In the standard SOIC-8 numbering sequence, pin 1 is the gain-resistor connection, pins 2 and 3 are the negative and positive inputs, pins 4 and 7 are the supply rails, pin 5 is the reference input, pin 6 is the output, and pin 8 is the gain-resistor connection.
Where to buy INA129UAG4 online?
Use the Request a Quote form on this page to request INA129UAG4 availability, current commercial terms, and an order quotation. The inquiry should include the required quantity, shipping destination, and target delivery schedule. This approach keeps commercial information tied to the exact INA129UAG4 order rather than a generic amplifier listing or a different package variant.
What is the price of INA129UAG4?
Current commercial pricing for INA129UAG4 should be requested through the Request a Quote form on this page. Submit the required quantity and delivery location so the quotation can reflect current inventory and order terms for the exact 8-pin SOIC device. Do not substitute the price of INA129U or INA129UA, because suffix and orderable-package differences can affect availability.
What is the lead time for INA129UAG4?
Request the current lead time through the Request a Quote form on this page. Lead time depends on available inventory, order quantity, and the requested delivery destination. The exact MPN and quantity should appear in the request so the commercial response applies to INA129UAG4 rather than another member of the INA129 family.
Is INA129UAG4 in stock?
Request current INA129UAG4 inventory through the Request a Quote form on this page. Inventory can change with order volume and shipment timing, so a previous stock count should not be treated as a reservation. Provide the required quantity and delivery date to obtain a current confirmation for the exact INA129UAG4 ordering code.
INA129UAG4 vs INA129UA - which is better for a sensor amplifier?
Choose INA129UAG4 when its exact orderable configuration matches the required SOIC-8 sourcing and assembly plan. INA129UA is also listed as a single-circuit 8-SOIC instrumentation amplifier and may be preferable when it is the approved BOM item. The suffix can encode ordering, packaging, or qualification differences, so compare the manufacturer orderable-information table before treating the two MPNs as interchangeable.
Is INA129UAG4 suitable for bridge-sensor measurements?
Yes, INA129UAG4 is suitable for bridge-sensor measurements when its input, output, supply, and common-mode limits fit the bridge excitation and signal range. Its 25 µV typical input offset and 5 nA typical input bias current support accurate measurement from high-impedance sensors. The 200 kHz bandwidth at gain 100 also allows the device to handle more than a purely static DC signal.
When should I choose INA129UAG4 over a cross-brand instrumentation amplifier?
Choose INA129UAG4 when the design requires its 1.3 MHz gain-bandwidth product, 200 kHz bandwidth at gain 100, ±40 V internal input protection, and established 8-pin SOIC implementation. A cross-brand device should be selected only after its pinout, gain-setting method, common-mode range, output swing, bandwidth, and input protection have been checked against the original circuit requirements.
What can replace INA129UAG4?
The closest replacement candidates are pin-compatible INA129-family 8-SOIC devices and established instrumentation amplifiers such as the AD620 family, subject to a full electrical review. The INA129UA and INA129U are directly represented in 8-SOIC options. Confirm gain-range behavior, reference-pin implementation, common-mode limits, supply range, bandwidth, offset drift, and input-protection rating before approving a replacement.
What is the best Analog Devices equivalent for INA129UAG4?
The AD620 family is a relevant cross-brand candidate for some INA129UAG4 applications because it is a precision instrumentation amplifier available in an 8-lead package. It is not automatically a drop-in substitute: the AD620 uses a single external gain resistor, while engineers must compare input bias current, offset, bandwidth, common-mode range, output swing, supply range, and protection requirements. The manufacturer datasheet and circuit simulation should approve the substitution.

Справочные инженерные данные для INA129UAG4 — сравнение, рекомендации по проектированию и информация о соответствии.

Руководство по выбору

Choose INA129UAG4 when the design needs a low-power precision instrumentation amplifier in an 8-pin SOIC, particularly for differential sensor signals where 1.3 MHz gain-bandwidth, 200 kHz bandwidth at gain 100, 25 µV typical offset, and ±40 V input protection are valuable. Select INA129U or INA129UA when that exact orderable configuration is preferable, but verify suffix, qualification, packaging, and assembly requirements against the manufacturer orderable table. INA128UAG4 is the logical same-brand choice when its family-specific electrical characteristics better match the required gain, bandwidth, or operating range. Consider AD620ARZ only after checking its different gain-setting method, supply current, common-mode limits, offset, bandwidth, and output swing. For every candidate, confirm the exact 8-SOIC footprint, input protection requirement, reference behavior, and operating temperature range before releasing the PCB.

Сравнение с аналогами

Параметр Этот товар INA129U INA129UA INA129UA/2K5 INA128UAG4 AD620ARZ
Brand Texas Instruments Texas Instruments Texas Instruments Texas Instruments Texas Instruments Analog Devices
Package 8-SOIC 8-SOIC 8-SOIC 8-SOIC 8-SOIC 8-SOIC
Product Type Precision instrumentation amplifier Instrumentation amplifier Precision instrumentation amplifier Precision instrumentation amplifier Precision instrumentation amplifier Instrumentation amplifier
Number of Circuits 1 circuit 1 circuit 1 circuit 1 circuit 1 circuit 1 circuit

Ключевые отличия

  • Higher gain bandwidth than the AD620ARZ class (против AD620ARZ)
  • Lower-power precision instrumentation-amplifier architecture (против AD620ARZ)
  • Established same-package family options (против INA128UAG4)

Заметки по проектированию

Connect the external gain resistor directly between pins 1 and 8, and keep the input traces short and symmetric. Route the two differential inputs away from switching-node copper and high-current return paths to preserve common-mode rejection. Place input filtering close to the relevant pins, but account for component tolerances and leakage in high-impedance sensor channels.

Use a clean, low-impedance connection for the REF pin. If the output must be centered above ground in a single-supply circuit, drive REF from a low-noise buffered reference and decouple it locally. Avoid floating REF unless the manufacturer permits that operating condition, because reference noise and impedance can otherwise degrade output accuracy.

Do not treat the ±40 V input-protection rating as the normal operating input range. Confirm the supported input common-mode range, maximum differential input, output swing, and supply limits for the selected gain and temperature. Also verify that the exact INA129UAG4 ordering configuration, rather than INA129U or INA129UA, matches the PCB, qualification, and assembly requirements.

Информация о соответствии

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Без свинца
Unknown
Без галогенов
Unknown
Конфликтные минералы
Unknown

The INA129UAG4 is an industrial instrumentation amplifier; no automotive qualification is indicated by the available product information. Compliance attributes require confirmation from the manufacturer documentation.

Данные проверены: 2026-11-19 — данные проверены и курируются командой компонентной инженерии XAIPART

Похожие запросы

INA129UAG4 datasheet INA129UAG4 pinout INA129UAG4 datasheet pdf INA129UAG4 equivalent INA129UAG4 replacement INA129UAG4 cross reference INA129UAG4 vs AD620ARZ INA129UAG4 price INA129UAG4 stock INA129UAG4 8-SOIC pinout INA129UAG4 application circuit Texas Instruments INA129UAG4

Связанные компоненты & термины

Texas Instruments INA129UAG4 INA129U INA129UA INA128UAG4 AD620ARZ Analog Devices precision instrumentation amplifier instrumentation amplifier operational amplifier analog signal-conditioning IC three-op-amp architecture current-feedback input gain-bandwidth product common-mode rejection input offset voltage input bias current external gain resistor instrumentation amplifier 8-SOIC SOIC family surface-mount package bridge sensor strain-gauge measurement
Быстрый запрос цены (RFQ)
Заполните все данные — наша команда продаж ответит в течение 24 часов
Артикул Производитель Корпус QTY Целевая цена Итого
✓
Запрос цены отправлен!

Мы ответим на ваш email в течение 24 часов

1
RFQ отправлен
2
Предложение получено
3
Заказ оформлен
4
Оплата
5
Отправлено
6
Доставлено
Просмотреть детали RFQ