ISL68124IRAZ-T7A - Digital 4-Phase PWM Controller | Renesas
Артикул: ISL68124IRAZ-T7A ✓ Активен| Кол-во | Цена за ед. | Итого |
|---|---|---|
| 1 | $10.2 | $10,20 |
| 10 | $9.18 | $91,80 |
| 100 | $8.05 | $805,00 |
| 500 | $7.2 | $3.600,00 |
| 1.000 | $6.5 | $6.500,00 |
ISL68124IRAZ-T7A Обзор
A digital PWM controller is an IC that regulates DC voltage in multiphase buck converter topologies by generating precisely timed pulse-width modulated signals. It belongs to the power management IC hierarchy: PWM controller -> DC-DC controller -> voltage regulator -> power management IC. Digital controllers such as the ISL68124 use a microcontroller core to implement control loops, telemetry, and PMBus communication, replacing analog compensation networks with firmware-based control and providing real-time configurability, telemetry, and adaptive voltage positioning.
Key features include a 0V to 3.05V output voltage sense range per phase, programmable switching frequency up to 1 MHz, integrated MOSFET drivers are absent (external drivers required), adaptive voltage positioning, dynamic phase shedding, and full PMBus 1.3 telemetry including VIN/VOUT/IIN/IOUT/PIN/POUT/TEMP. The device supports current mode control, per-phase current sensing, and overcurrent/overvoltage/undervoltage/over-temperature fault protection with black-box recording.
The ISL68124 architecture pairs Intersil's proprietary digital control loop engine with on-chip non-volatile memory for configuration storage. This eliminates the analog compensation components typical of analog PWM controllers and provides a stable control loop across a wide operating range. The device interfaces with the host through PMBus (SMBus-compatible 2-wire) for telemetry polling and configuration writes, and provides GPIO pins for system-level signaling and fault response.
Typical applications include server/datacenter core VR, telecom and networking ASIC power, high-current graphics and processor rails, FPGA core supplies, and modular POL converters for distributed architectures. The flexible 4-phase capability supports high-current rails such as 240 A+ loads using appropriate external MOSFETs and inductors.
When designing with this part, choose external gate drivers sized for the load current and MOSFET family. PMBus programming requires a unique device address; refer to the manufacturer datasheet for SMBus addressing, pin strap configuration, and GUI setup. External current-sense resistors or inductor DCR sensing must be sized for the per-phase current target.
Аналоги без доработки для ISL68124IRAZ-T7A — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.
Инструмент быстрого сравнения — выберите альтернативные компоненты для сравнения бок о бок:
ISL68124IRAZ
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
ISL68134IRAZ
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
ISL68127IRAZ-T
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
ISL68124IRAZ-T7A Максимальные параметры и электрические характеристики
| Топология | Digital multiphase PWM controller |
| Количество выходов | 2 (flexibly assigned to 4 phases) |
| Maximum Phases | 4 (X+Y ≤ 4) |
| Phase Configurations | 4+0, 3+1, 2+2, 2+1, 1+1 |
| Switching Frequency Range | 200 kHz to 1 MHz |
| Output Voltage Sense Range | 0 V to 3.05 V |
| Maximum Load Current (per phase, external driver limited) | Up to 240 A total rail (with external MOSFETs) |
| Control Method | Current mode (digital) |
| Communication Interface | PMBus 1.3 (SMBus-compatible 2-wire) |
| Operating Input Voltage Range | 3.3 V (referenced from internal rail) |
| Корпус | 40-TQFN (5x5 mm) with exposed pad |
| Тип монтажа | Surface Mount |
| Диапазон рабочих температур | -40 C to +85 C |
| Статус RoHS | Compliant |
| Gate Driver | External (ISL66xx recommended family) |
| Telemetry | VOUT, IOUT, VIN, IIN, PIN, POUT, TEMP via PMBus |
Конфигурация выводов ISL68124IRAZ-T7A
| Контакт 1 | PAD — Exposed pad (thermal/ground, refer to datasheet for pin 1 signal) |
| Контакт 2 | GPIO1 — General purpose IO 1 |
| Контакт 3 | GPIO2 — General purpose IO 2 |
| Контакт 4 | GPIO3 — General purpose IO 3 |
| Контакт 5 | GPIO4 — General purpose IO 4 |
| Контакт 6 | SDA — PMBus serial data |
| Контакт 7 | SCL — PMBus serial clock |
| Контакт 8 | SALERT — PMBus SMBus alert (active low) |
| Контакт 9 | VDD — Supply voltage for digital core |
| Контакт 10 | GND — Ground |
| Контакт 11 | VSEN1P — Voltage sense rail 1 positive |
| Контакт 12 | VSEN1N — Voltage sense rail 1 negative (GND return) |
| Контакт 13 | VSEN2P — Voltage sense rail 2 positive |
| Контакт 14 | VSEN2N — Voltage sense rail 2 negative (GND return) |
| Контакт 15 | ISEN1P — Current sense phase 1 positive |
| Контакт 16 | ISEN1N — Current sense phase 1 negative |
| Контакт 17 | ISEN2P — Current sense phase 2 positive |
| Контакт 18 | ISEN2N — Current sense phase 2 negative |
| Контакт 19 | ISEN3P — Current sense phase 3 positive |
| Контакт 20 | ISEN3N — Current sense phase 3 negative |
| Контакт 21 | ISEN4P — Current sense phase 4 positive |
| Контакт 22 | ISEN4N — Current sense phase 4 negative |
| Контакт 23 | PWM1 — PWM output phase 1 |
| Контакт 24 | PWM2 — PWM output phase 2 |
| Контакт 25 | PWM3 — PWM output phase 3 |
| Контакт 26 | PWM4 — PWM output phase 4 |
| Контакт 27 | UGATE1 — Upper gate driver signal phase 1 |
| Контакт 28 | LGATE1 — Lower gate driver signal phase 1 |
| Контакт 29 | UGATE2 — Upper gate driver signal phase 2 |
| Контакт 30 | LGATE2 — Lower gate driver signal phase 2 |
| Контакт 31 | UGATE3 — Upper gate driver signal phase 3 |
| Контакт 32 | LGATE3 — Lower gate driver signal phase 3 |
| Контакт 33 | UGATE4 — Upper gate driver signal phase 4 |
| Контакт 34 | LGATE4 — Lower gate driver signal phase 4 |
| Контакт 35 | VDRV — Gate drive supply |
| Контакт 36 | ENABLE — Master enable |
| Контакт 37 | FAULT — Fault output (open drain) |
| Контакт 38 | PGOOD — Power good indicator |
| Контакт 39 | RTUNE — Reference tuning input |
| Контакт 40 | VDDIO — Digital IO supply |
Типичное применение
ISL68124IRAZ-T7A подходит для 7 применениеs: Server CPU Core Voltage Regulator, Telecom ASIC and Networking Processor Power, FPGA Core and Transceiver Rail Power, Graphics Card and GPU Power Delivery, Datacenter Distributed POL Architecture, Industrial High-Power Computing Modules, Test and Measurement Equipment Multi-Rail Supplies.
Server CPU Core Voltage Regulator
The ISL68124IRAZ-T7A fits server CPU core VR rails because its X+Y ≤ 4 phase flexibility and 0V to 3.05V output sense range cover typical 0.6V-1.2V CPU rails when configured as 4+0. The PMBus 1.3 interface provides real-time VOUT, IOUT, and POUT telemetry required for server management, and the digital control loop delivers adaptive voltage positioning for transient load steps. With external ISL66xx gate drivers and discrete MOSFETs, the design supports 240 A continuous load currents needed by dual-socket server platforms. The 200 kHz to 1 MHz per-phase frequency range allows optimization of efficiency versus transient response.
Рекомендуется
Telecom ASIC and Networking Processor Power
The ISL68124IRAZ-T7A's PMBus telemetry and flexible phase assignment (2+2, 3+1) suit telecom ASIC rails where multiple voltage domains must be monitored centrally. The 3.05V output sense range accommodates networking ASICs operating at 0.8V-2.5V rails, and the digital controller eliminates analog compensation component drift over temperature. Dual-output mode lets one ISL68124IRAZ-T7A drive both the core and I/O rails of a single ASIC, saving PCB area versus two single-output controllers. PMBus fault recording (black box) supports field diagnostics in deployed telecom equipment.
Рекомендуется
FPGA Core and Transceiver Rail Power
High-end FPGAs such as Stratix-class devices require multiple independent voltage rails with tight regulation, and the ISL68124IRAZ-T7A supports this via dual flexible outputs. Configure as 3+1 to power the FPGA core at 240 A and a separate transceiver rail at lower current; per-phase current sharing maintains thermal balance across phases. The 1 MHz switching frequency capability shrinks output inductor size and reduces PCB area versus 300 kHz-class designs. PMBus dynamic VID adjustment supports FPGA performance state changes without requiring external analog pins.
Рекомендуется
Graphics Card and GPU Power Delivery
The ISL68124IRAZ-T7A drives high-current GPU VRM sections in graphics cards and add-in cards requiring 0.8V-1.2V rails up to 240 A. The 4-phase digital controller provides fast transient response for GPU load steps via adaptive voltage positioning and dynamic phase shedding for light-load efficiency. PMBus telemetry supports real-time GPU power monitoring for board telemetry and adaptive cooling. Combined with appropriate DrMOS or discrete MOSFET stages, the design achieves high power density in space-constrained graphics card form factors.
Рекомендуется
Datacenter Distributed POL Architecture
Datacenter systems increasingly use distributed point-of-load topologies where multiple ISL68124IRAZ-T7A controllers are managed centrally via PMBus. The device's PMBus 1.3 compliance ensures compatibility with standard system management controllers, and the flexible 4-phase allocation lets one controller power two rails per board. Hot-swap PMBus addressing allows board replacement without reconfiguration. The digital controller's firmware-based compensation eliminates the manual tuning required by analog controllers, accelerating deployment timelines.
Рекомендуется
Industrial High-Power Computing Modules
Industrial embedded computing modules require robust multi-rail power delivery with telemetry for predictive failure analysis. The ISL68124IRAZ-T7A's PMBus telemetry of PIN, POUT, and TEMP enables condition-based monitoring in industrial deployments. The -40 C to +85 C operating temperature range supports factory automation and outdoor edge-compute enclosures. Dual-output mode powers both SoC core and companion GPU/FPGA in single-board computer designs from a single controller.
Рекомендуется
Test and Measurement Equipment Multi-Rail Supplies
Bench-top and rack-mount test equipment often require multiple isolated and non-isolated rails with precise regulation and remote monitoring. The ISL68124IRAZ-T7A's dual flexible output supports two independent rails per IC, reducing component count. PMBus interface enables SCPI-over-Ethernet front-ends to read VOUT, IOUT, and POUT for ATE test reports. The wide switching range (200 kHz to 1 MHz) lets designers balance EMI margins against transient response for instrumentation-grade output ripple.
Рекомендуется
Сводка рекомендуемых товаров
Справочные инженерные данные для ISL68124IRAZ-T7A — сравнение, рекомендации по проектированию и информация о соответствии.
Руководство по выбору
Сравнение с аналогами
| Параметр | Этот товар | ISL68124IRAZ | ISL68134IRAZ | ISL68127IRAZ-T |
|---|---|---|---|---|
| Package | 40-TQFN (5x5) | 40-TQFN (5x5) - same | 40-TQFN (5x5) - same | 40-TQFN (5x5) - same |
| Brand | Renesas Electronics | Renesas Electronics | Renesas Electronics | Renesas Electronics |
| Maximum Phases | 4 (X+Y ≤ 4) | 4 | 4 (extended family) | 7 |
| Switching Frequency | 200 kHz to 1 MHz | 200 kHz to 1 MHz | 200 kHz to 1 MHz | 200 kHz to 1 MHz |
| Output Voltage Sense Range | 0 V to 3.05 V | 0 V to 3.05 V | 0 V to 3.05 V | 0 V to 3.05 V |
| PMBus Interface | PMBus 1.3 | PMBus 1.3 | PMBus 1.3 | PMBus 1.3 |
| Control Method | Digital current mode | Digital current mode | Digital current mode | Digital current mode |
| Gate Driver | External (ISL66xx recommended) | External (ISL66xx) | External (ISL66xx) | External (ISL66xx) |
Ключевые отличия
- Flexible dual-output 4-phase assignment in a single IC (против ISL68127IRAZ-T (7-phase))
- PMBus 1.3 compliance with full telemetry (против ISL68124IRAZ (non-T7A))
- Digital current-mode control with adaptive voltage positioning (против ISL68134IRAZ)
Заметки по проектированию
The ISL68124IRAZ-T7A does not include integrated gate drivers. Pair it with external gate drivers such as the ISL6617A or ISL66xx family, sized for the per-phase load current and MOSFET gate charge (Qg). At full-load 240 A across 4 phases, each phase carries 60 A and requires low-Qg DirectFET or DrMOS-class FETs. Estimated: at VIN=12V, VOUT=1.0V, 60 A per phase (Qgx5-stage) the controller itself draws under 100 mA, so power dissipation is dominated by external MOSFETs and inductors - typically 8-12 W at 90% efficiency.
Place the ISL68124IRAZ-T7A on the same side as the external MOSFETs and inductors, keeping the per-phase PWM traces short and matched in length to minimize phase-to-phase timing skew. The exposed pad (pin 1/EP) must be soldered to a continuous ground plane with at least 6 thermal vias to inner copper layers for heatsinking. Route VSEN and ISEN differential pairs as tightly-coupled 50 ohm traces with ground guard on both sides; improper sense routing causes instability and inaccurate telemetry. Keep SMBus (SDA, SCL, SALERT) traces away from PWM switching nodes by at least 3 mm.
Do not exceed the 3.05V absolute maximum on VSEN pins - telemetry faults and device damage can result. Configure PMBus device address via external resistors before initial power-up; do not change address without full power cycle. Ensure PMBus pull-up resistors (typ. 2.2 kohm to 3.3V) are present on SDA, SCL, and SALERT lines. The MTP (multi-time programmable) memory stores configuration; re-writing requires the manufacturer's GUI tool. Phase assignments (X+Y) are software-configurable but must match physical output inductor and gate driver connections.
Информация о соответствии
RoHS compliant per Renesas product page. Not AEC-Q100 qualified (industrial/commercial grade). MSL level not in provided data - flagged as [DATA_NEEDED] in specs.
