ISL8324IB-T - Dual SPST Analog Switch, 60 Ohm, 8-SOIC
Артикул: ISL8324IB-T ✗ Снят с производстваISL8324IB-T Обзор
An analog switch is an integrated semiconductor device that connects or disconnects signal paths under control of logic signals. The SPST, or single-pole single-throw, architecture provides one controlled conduction path per channel. The ISL8324IB-T therefore supports two separately controlled switching functions in one package, reducing board area compared with discrete switching solutions.
The ISL8324IB-T belongs to the Intersil ISL8323-ISL8325 family of precision, dual analog switches. Its operating characteristics identify a 60 ohm on-resistance and a 1:1 configuration. The 8-SOIC package is a standard surface-mount package for compact industrial and embedded designs. The device is identified as an industrial-temperature component and is intended for single-supply operation, making it relevant to battery-powered equipment, measurement systems, and control circuits.
The two switch channels can route analog control signals, sensor outputs, test points, or low-voltage communication paths. Their independently controlled state allows a controller to isolate a signal source, select between signal paths, or create a controlled connection between an external circuit and a system test point. The compact SOIC footprint also makes the device suitable for designs that cannot accommodate a larger analog-switch package.
When using the ISL8324IB-T, verify the supply voltage, control-logic levels, signal-voltage range, switch leakage, and operating temperature against the application requirements. The control pins and switched terminals must remain within the limits defined by the manufacturer datasheet. Because the device has two independent channels, PCB layout should keep the control traces away from sensitive analog paths and provide adequate grounding around the switching network.
This product page combines the manufacturer family description, package and circuit details, comparison information, and practical design guidance. It also explains where a true same-package replacement can be used and where a different package requires a PCB change.
Аналоги без доработки для ISL8324IB-T — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.
Варианты в этой серии
Модели той же серии, совместимые без доработки с ISL8324IB-T (тот же форм-фактор и посадочное место).
ISL8324IB
✅ Прямая заменаУточнить цену
Открыть даташит →ISL8324IB-T Максимальные параметры и электрические характеристики
| Product Type | Dual SPST analog switch |
| Number of Circuits | 2 circuits |
| Switch Configuration | 1:1 |
| On Resistance | 60 ohm |
| Supply Type | Single supply |
| Voltage Class | Low voltage |
| Корпус | 8-SOIC |
| Number of Terminals | 8 terminals |
| Способ монтажа | Surface mount |
| Temperature Grade | Industrial |
| Switch Pole Configuration | SPST |
| Package Code | SOP |
| Package Shape | Rectangular |
Конфигурация выводов ISL8324IB-T
| Контакт 1 | [DATA_NEEDED: pin 1 name] — Consult the manufacturer pin-description table for the ISL8324IB-T 8-SOIC package. |
| Контакт 2 | [DATA_NEEDED: pin 2 name] — Consult the manufacturer pin-description table for the ISL8324IB-T 8-SOIC package. |
| Контакт 3 | [DATA_NEEDED: pin 3 name] — Consult the manufacturer pin-description table for the ISL8324IB-T 8-SOIC package. |
| Контакт 4 | [DATA_NEEDED: pin 4 name] — Consult the manufacturer pin-description table for the ISL8324IB-T 8-SOIC package. |
| Контакт 5 | [DATA_NEEDED: pin 5 name] — Consult the manufacturer pin-description table for the ISL8324IB-T 8-SOIC package. |
| Контакт 6 | [DATA_NEEDED: pin 6 name] — Consult the manufacturer pin-description table for the ISL8324IB-T 8-SOIC package. |
| Контакт 7 | [DATA_NEEDED: pin 7 name] — Consult the manufacturer pin-description table for the ISL8324IB-T 8-SOIC package. |
| Контакт 8 | [DATA_NEEDED: pin 8 name] — Consult the manufacturer pin-description table for the ISL8324IB-T 8-SOIC package. |
Типичное применение
ISL8324IB-T подходит для 6 применениеs: Battery-Powered Signal Routing, Sensor Signal Isolation, Test-Point Routing, Analog Control-Signal Multiplexing, Industrial Control and Interface Boards, Low-Voltage Communication Interfaces.
Battery-Powered Signal Routing
The ISL8324IB-T suits battery-powered systems that need to route or isolate two low-voltage signals without allocating space for separate discrete switches. Its two SPST channels, single-supply architecture, and 60 ohm on-resistance provide a compact implementation for sensor selection, load isolation, and signal-path control. The design should keep the control levels and signal amplitudes within the manufacturer’s absolute maximum and recommended operating limits. Because the switch contributes 60 ohm of series resistance in the ON state, account for that impedance when driving high-impedance sensor inputs or divider networks. Use the datasheet pin table and package drawing to assign each channel and connect the supply and ground pins close to the device.
Рекомендуется
Sensor Signal Isolation
Use the ISL8324IB-T when a sensor signal must be disconnected from an analog measurement path during calibration, reset, or a controlled test. Each SPST channel can provide an independent isolation function, allowing two sources or nodes to be managed with one 8-SOIC device. The 60 ohm on-resistance should be included in the signal-chain error analysis when the connected input is high impedance. Control traces should be routed away from sensitive sensor nets to prevent switching activity from coupling into the measurement path. The single-supply design is useful in compact instrumentation, but the exact supply range and control thresholds must be verified against the sensor output voltage.
Рекомендуется
Test-Point Routing
The ISL8324IB-T can route internal circuit nodes to an external test point when a controller needs to disconnect or connect instrumentation during board bring-up or diagnostics. Two independently controlled SPST paths provide flexibility for separating a DUT node from a measurement fixture. The 8-SOIC surface-mount package supports compact test circuitry without the area required by a larger multi-channel switch. Keep the test-point connector and switching traces away from precision analog nodes where possible, and provide a defined state at power-up if the system requires repeatable diagnostics. Review the switch leakage and off-resistance values in the manufacturer datasheet before using it as a high-impedance measurement gate.
Рекомендуется
Analog Control-Signal Multiplexing
The ISL8324IB-T can be used as part of a small analog-control network where two low-level signals must be connected to downstream circuitry under independent digital control. Its 1:1 configuration preserves the signal path without an inverting function, and the 60 ohm on-resistance provides a defined path resistance when the switch is closed. Designers should compensate for path loss when the receiving circuit has a high input impedance. The two channels also allow complementary routing, provided the control timing is compatible with the downstream amplifier or converter. Use separate return paths and short control traces to reduce coupling between the two switched nodes.
Рекомендуется
Industrial Control and Interface Boards
The ISL8324IB-T is suitable for industrial control boards requiring two compact, independently controlled analog connections. The industrial temperature-grade marking supports use in industrial equipment, while the surface-mount 8-SOIC package simplifies automated assembly and PCB routing. Typical functions include connecting external command signals, isolating an actuator-control node, or selecting a feedback path. The device is not intended to replace a power MOSFET or relay for high-current loads; its signal-switching role should remain within the voltage, current, and logic limits specified by the manufacturer. Confirm the exact operating temperature range and control thresholds before release to production.
Рекомендуется
Low-Voltage Communication Interfaces
The ISL8324IB-T can support low-voltage communication routing where a controller must connect, disconnect, or isolate a peripheral signal path. Its dual SPST architecture allows two lines to be controlled independently, and its 1:1 configuration avoids signal inversion. Because the on-resistance is 60 ohm, the device is best suited to moderate-impedance or CMOS-compatible interfaces rather than long, high-impedance analog links. Keep the switched traces short, provide a continuous ground reference, and isolate the control logic from nearby clock or switching-regulator nodes. The datasheet should be used to confirm the maximum signal voltage, control thresholds, leakage, and allowable operating conditions.
Рекомендуется
Справочные инженерные данные для ISL8324IB-T — сравнение, рекомендации по проектированию и информация о соответствии.
Руководство по выбору
Сравнение с аналогами
| Параметр | Этот товар | ISL8324IB |
|---|---|---|
| Package | 8-SOIC | 8-SOIC |
| Brand | Renesas Electronics | Renesas Electronics |
| Number of Circuits | 2 circuits | 2 circuits |
| Switch Configuration | 1:1 | 1:1 |
| On Resistance | 60 ohm | 60 ohm |
| Mounting Style | Surface mount | Surface mount |
| Number of Terminals | 8 terminals | 8 terminals |
Ключевые отличия
- Two independent SPST channels in one compact package (против ISL83483IBZ-T)
- Documented 60 ohm on-resistance (против ISL8324IB)
- Single-supply low-voltage architecture (против ISL83072EIBZA)
Заметки по проектированию
Account for the specified 60 ohm on-resistance when the switch drives a high-impedance input, because the closed switch forms part of the signal path and can create attenuation or loading. Keep switched traces short and use a continuous ground reference. The exact off-resistance and leakage should be checked in the manufacturer datasheet before using the device as a high-impedance isolation gate.
Place the 8-SOIC device close to the routed signal nodes and keep the control pins away from sensitive analog traces. Use the package land pattern and pin-description table from the manufacturer datasheet. A compact layout helps minimize trace resistance and coupling, while separating control routing from measurement paths reduces the chance of switching transients appearing on the controlled signal.
Decouple the supply pin locally and connect the device ground to the system return without long loops. Do not assume that a single-supply analog switch can accept signal voltages outside the supply range. Review the absolute maximum ratings, recommended operating conditions, control thresholds, and maximum signal current before connecting external nodes.
Информация о соответствии
The available product references do not explicitly state the compliance status of the ISL8324IB-T. AEC-Q100 is not applicable to this analog switch unless an automotive-qualified variant is specifically identified.