Renesas Electronics

ISL8324IB-T - Dual SPST Analog Switch, 60 Ohm, 8-SOIC

Teilenummer: ISL8324IB-T ✗ Abgekündigt
Single supply Vdss 60 ohm Rds(on) 8-SOIC Package
MOQ: 1 |

ISL8324IB-T Übersicht

Renesas Electronics ISL8324IB-T is a low-voltage, single-supply, dual SPST analog switch with a 1:1 signal configuration, 60 ohm on-resistance, and an 8-pin SOIC package. The device is designed for routing low-voltage analog or digital signals when a compact, surface-mount switch with two independent channels is required.

An analog switch is an integrated semiconductor device that connects or disconnects signal paths under control of logic signals. The SPST, or single-pole single-throw, architecture provides one controlled conduction path per channel. The ISL8324IB-T therefore supports two separately controlled switching functions in one package, reducing board area compared with discrete switching solutions.

The ISL8324IB-T belongs to the Intersil ISL8323-ISL8325 family of precision, dual analog switches. Its operating characteristics identify a 60 ohm on-resistance and a 1:1 configuration. The 8-SOIC package is a standard surface-mount package for compact industrial and embedded designs. The device is identified as an industrial-temperature component and is intended for single-supply operation, making it relevant to battery-powered equipment, measurement systems, and control circuits.

The two switch channels can route analog control signals, sensor outputs, test points, or low-voltage communication paths. Their independently controlled state allows a controller to isolate a signal source, select between signal paths, or create a controlled connection between an external circuit and a system test point. The compact SOIC footprint also makes the device suitable for designs that cannot accommodate a larger analog-switch package.

When using the ISL8324IB-T, verify the supply voltage, control-logic levels, signal-voltage range, switch leakage, and operating temperature against the application requirements. The control pins and switched terminals must remain within the limits defined by the manufacturer datasheet. Because the device has two independent channels, PCB layout should keep the control traces away from sensitive analog paths and provide adequate grounding around the switching network.

This product page combines the manufacturer family description, package and circuit details, comparison information, and practical design guidance. It also explains where a true same-package replacement can be used and where a different package requires a PCB change.

Drop-in-Alternativen für ISL8324IB-T – gleiches Gehäuse, Pin-kompatibel. Bauteile mit anderem Gehäuse, die eine PCB-Überarbeitung erfordern, sind ausgeschlossen.

Varianten dieser Serie

Modelle derselben Serie, die drop-in-kompatibel sind mit ISL8324IB-T (gleiche Bauform und Footprint).

ISL8324IB

✅ Drop-In
Renesas Electronics
📦 8-SOIC
Dual SPST analog switch · 2 circuits · 1:1 · 60 ohm · Single supply · -40 C to +85 C · 8-SOIC, 0.154 inch width, 3.90 mm · SOIC-8 surface-mount package

Preis auf Anfrage

Datenblatt ansehen →

ISL8324IB-T Grenzwerte & elektrische Eigenschaften

Product Type Dual SPST analog switch
Number of Circuits 2 circuits
Switch Configuration 1:1
On Resistance 60 ohm
Supply Type Single supply
Voltage Class Low voltage
Gehäuse 8-SOIC
Number of Terminals 8 terminals
Montagestil Surface mount
Temperature Grade Industrial
Switch Pole Configuration SPST
Package Code SOP
Package Shape Rectangular

ISL8324IB-T Pin-Konfiguration

SOIC-8 Package Pinout Diagram SOIC-8 8-pin small outline IC, 3.9x4.9mm, P1.27mm, JEDEC MS-012. 1 8 2 7 3 6 4 5 SOIC-8
Pin 1 [DATA_NEEDED: pin 1 name] — Consult the manufacturer pin-description table for the ISL8324IB-T 8-SOIC package.
Pin 2 [DATA_NEEDED: pin 2 name] — Consult the manufacturer pin-description table for the ISL8324IB-T 8-SOIC package.
Pin 3 [DATA_NEEDED: pin 3 name] — Consult the manufacturer pin-description table for the ISL8324IB-T 8-SOIC package.
Pin 4 [DATA_NEEDED: pin 4 name] — Consult the manufacturer pin-description table for the ISL8324IB-T 8-SOIC package.
Pin 5 [DATA_NEEDED: pin 5 name] — Consult the manufacturer pin-description table for the ISL8324IB-T 8-SOIC package.
Pin 6 [DATA_NEEDED: pin 6 name] — Consult the manufacturer pin-description table for the ISL8324IB-T 8-SOIC package.
Pin 7 [DATA_NEEDED: pin 7 name] — Consult the manufacturer pin-description table for the ISL8324IB-T 8-SOIC package.
Pin 8 [DATA_NEEDED: pin 8 name] — Consult the manufacturer pin-description table for the ISL8324IB-T 8-SOIC package.

Typische Anwendungen

ISL8324IB-T ist geeignet für 6 Anwendungs: Battery-Powered Signal Routing, Sensor Signal Isolation, Test-Point Routing, Analog Control-Signal Multiplexing, Industrial Control and Interface Boards, Low-Voltage Communication Interfaces.

⚡

Battery-Powered Signal Routing

The ISL8324IB-T suits battery-powered systems that need to route or isolate two low-voltage signals without allocating space for separate discrete switches. Its two SPST channels, single-supply architecture, and 60 ohm on-resistance provide a compact implementation for sensor selection, load isolation, and signal-path control. The design should keep the control levels and signal amplitudes within the manufacturer’s absolute maximum and recommended operating limits. Because the switch contributes 60 ohm of series resistance in the ON state, account for that impedance when driving high-impedance sensor inputs or divider networks. Use the datasheet pin table and package drawing to assign each channel and connect the supply and ground pins close to the device.

🧩

Sensor Signal Isolation

Use the ISL8324IB-T when a sensor signal must be disconnected from an analog measurement path during calibration, reset, or a controlled test. Each SPST channel can provide an independent isolation function, allowing two sources or nodes to be managed with one 8-SOIC device. The 60 ohm on-resistance should be included in the signal-chain error analysis when the connected input is high impedance. Control traces should be routed away from sensitive sensor nets to prevent switching activity from coupling into the measurement path. The single-supply design is useful in compact instrumentation, but the exact supply range and control thresholds must be verified against the sensor output voltage.

🔧

Test-Point Routing

The ISL8324IB-T can route internal circuit nodes to an external test point when a controller needs to disconnect or connect instrumentation during board bring-up or diagnostics. Two independently controlled SPST paths provide flexibility for separating a DUT node from a measurement fixture. The 8-SOIC surface-mount package supports compact test circuitry without the area required by a larger multi-channel switch. Keep the test-point connector and switching traces away from precision analog nodes where possible, and provide a defined state at power-up if the system requires repeatable diagnostics. Review the switch leakage and off-resistance values in the manufacturer datasheet before using it as a high-impedance measurement gate.

🌐

Analog Control-Signal Multiplexing

The ISL8324IB-T can be used as part of a small analog-control network where two low-level signals must be connected to downstream circuitry under independent digital control. Its 1:1 configuration preserves the signal path without an inverting function, and the 60 ohm on-resistance provides a defined path resistance when the switch is closed. Designers should compensate for path loss when the receiving circuit has a high input impedance. The two channels also allow complementary routing, provided the control timing is compatible with the downstream amplifier or converter. Use separate return paths and short control traces to reduce coupling between the two switched nodes.

🏭

Industrial Control and Interface Boards

The ISL8324IB-T is suitable for industrial control boards requiring two compact, independently controlled analog connections. The industrial temperature-grade marking supports use in industrial equipment, while the surface-mount 8-SOIC package simplifies automated assembly and PCB routing. Typical functions include connecting external command signals, isolating an actuator-control node, or selecting a feedback path. The device is not intended to replace a power MOSFET or relay for high-current loads; its signal-switching role should remain within the voltage, current, and logic limits specified by the manufacturer. Confirm the exact operating temperature range and control thresholds before release to production.

📡

Low-Voltage Communication Interfaces

The ISL8324IB-T can support low-voltage communication routing where a controller must connect, disconnect, or isolate a peripheral signal path. Its dual SPST architecture allows two lines to be controlled independently, and its 1:1 configuration avoids signal inversion. Because the on-resistance is 60 ohm, the device is best suited to moderate-impedance or CMOS-compatible interfaces rather than long, high-impedance analog links. Keep the switched traces short, provide a continuous ground reference, and isolate the control logic from nearby clock or switching-regulator nodes. The datasheet should be used to confirm the maximum signal voltage, control thresholds, leakage, and allowable operating conditions.

What is the ISL8324IB-T used for?
The ISL8324IB-T is a dual SPST analog switch intended to route or isolate two low-voltage signal paths. According to the Intersil ISL8323-ISL8325 family datasheet, the device uses single-supply operation and provides a 1:1 configuration. Its two controlled channels can be used for signal selection, sensor isolation, test-point routing, or controlled connections in battery-powered and industrial equipment.
How many circuits and terminals does the ISL8324IB-T have?
The ISL8324IB-T contains 2 circuits in an 8-SOIC package with 8 terminals. The distributor product listing identifies the part as a 2-circuit, 1:1 analog switch, while the package description identifies an 8-SOIC surface-mount package. The two channels are packaged together, allowing a compact implementation for designs requiring two controlled analog connections.
What is the on-resistance of the ISL8324IB-T?
The ISL8324IB-T has a specified on-resistance of 60 ohm. The manufacturer datasheet and distributor listing identify this value for the dual SPST switch. Because the on-resistance contributes to signal attenuation and loss, applications using the device with high-impedance sensing networks should account for the 60 ohm path resistance and the loading introduced by the downstream circuit.
What is the difference between SPST and a DPDT switch?
An SPST switch has one normally open path that is either connected or disconnected, while a DPDT switch can connect one common terminal to one of two switched terminals. The ISL8324IB-T uses two SPST channels in one 8-SOIC package. This makes it suitable for independent isolation or routing functions rather than a single common-terminal selector.
Where can I download the ISL8324IB-T datasheet PDF?
The ISL8324IB-T datasheet is available through the manufacturer-family document link and the indexed datasheet listing. The manufacturer datasheet describes the low-voltage, single-supply, dual SPST operation, while the product listing identifies the 8-SOIC package and 60 ohm on-resistance. Use the datasheet for complete pin descriptions, absolute maximum ratings, control thresholds, and application details.
Where can I find the ISL8324IB-T pinout?
The ISL8324IB-T pinout is documented in the manufacturer datasheet for the 8-SOIC package. The package has 8 terminals arranged as two dual SPST analog switches with their associated control inputs. Before assigning PCB tracks, use the pin-description table and package drawing in the datasheet to confirm each common, switched, control, supply, and ground connection.
Can the ISL8324IB-T replace ISL8324IB?
The ISL8324IB is the closest documented same-family alternative and uses the same 8-SOIC device format. The ISL8324IB-T designation identifies the specified orderable variant of the ISL8324IB family. Confirm the exact suffix, control logic, temperature grade, and shipping format in the manufacturer ordering information before approving the substitution for production.
What is the best drop-in replacement for ISL8324IB-T?
The ISL8324IB is the best documented same-package candidate because it is identified as a 2-circuit, 1:1, 60 ohm switch in an 8-SOIC package. Other comparison results use different packages, such as ISL83072EIBZA and ISL83483IBZ-T, and therefore are not drop-in replacements for an existing ISL8324IB-T layout. Validate the exact suffix and operating ratings before substitution.
When should I choose the ISL8324IB-T instead of another dual analog switch?
Choose the ISL8324IB-T when the design needs two independently controlled SPST paths, single-supply operation, a 60 ohm on-resistance, and an 8-SOIC footprint. A larger or differently packaged switch may provide additional channels or different electrical ratings, but it would require a different footprint or PCB redesign. The compact SOIC package is most useful in low-voltage routing and isolation circuits.
Is the ISL8324IB-T suitable for battery-powered equipment?
Yes, the ISL8324IB-T is identified as a low-voltage, single-supply dual analog switch, and the manufacturer family description specifically targets battery-powered equipment. Its suitability depends on the actual supply range, control thresholds, signal amplitude, leakage, and operating temperature of the selected variant. Check those specifications in the ISL8324IB-T datasheet for the intended battery chemistry and rail conditions.
How should I lay out the ISL8324IB-T on a PCB?
Place the ISL8324IB-T close to the signals it routes and connect its ground and supply pins to a low-impedance return path. Keep control traces away from sensitive analog nodes, and route switched-node copper away from clocks, radio-frequency signals, and high-impedance amplifier inputs. Use the package land pattern and pin table in the manufacturer datasheet rather than relying on visual pad placement alone.
What are the thermal considerations for the ISL8324IB-T?
The ISL8324IB-T is an analog switch rather than a high-power regulator, so thermal dissipation is generally driven by the signal current and the voltage across the conducting switch. At low-voltage routing applications this is usually modest, but the exact allowable current and thermal limits must be checked in the manufacturer datasheet. Keep exposed copper continuous where the package permits and avoid elevated loading beyond the specified conditions.
Is the ISL8324IB-T lifecycle status active?
The current lifecycle status for the ISL8324IB-T is listed as unknown because the available manufacturer and distributor references do not explicitly state an active, NRND, or obsolete designation. The part remains available through current distributor listings, but purchasing teams should confirm the latest lifecycle statement with Renesas Electronics before committing a long-term design.
What is the ISL8324IB-T vs ISL83483IBZ-T difference?
The ISL8324IB-T is an 8-SOIC dual SPST analog switch with a 60 ohm on-resistance, while ISL83483IBZ-T is identified by a different package and is not a same-footprint substitute. The comparison result exposes the package distinction, so replacing one with the other requires footprint and pinout verification rather than a simple board change.
What should I check before using the ISL8324IB-T in a signal-routing design?
Check the supply voltage, control-logic thresholds, signal-voltage range, on-resistance, off leakage, switching behavior, and temperature limits in the manufacturer datasheet. Also confirm that the 8-SOIC pinout matches the PCB and that the two SPST channels are assigned to the intended signal paths. These checks establish whether the switch preserves the required signal integrity and operating margin.

Technische Referenzdaten für ISL8324IB-T – Vergleich, Designhinweise und Compliance-Informationen.

Auswahlhilfe

Choose the ISL8324IB-T when a compact, low-voltage, single-supply circuit needs two independent SPST paths in an 8-SOIC footprint. Its 60 ohm on-resistance is suitable for signal-routing and isolation applications where the downstream circuit is not driven by a very high impedance. The ISL8324IB is the closest same-package candidate when the exact suffix, temperature grade, and orderable configuration meet the design requirements. Do not select ISL83072EIBZA or ISL83483IBZ-T as direct drop-ins because their package references differ from the 8-SOIC target. Before finalizing a replacement, confirm supply range, control thresholds, leakage, signal-voltage limits, and operating temperature from the manufacturer datasheet. For new designs, choose the ISL8324IB-T when dual-channel routing and compact surface-mount assembly are the primary priorities.

Vergleich mit Alternativen

Parameter Dieses Produkt ISL8324IB
Package 8-SOIC 8-SOIC
Brand Renesas Electronics Renesas Electronics
Number of Circuits 2 circuits 2 circuits
Switch Configuration 1:1 1:1
On Resistance 60 ohm 60 ohm
Mounting Style Surface mount Surface mount
Number of Terminals 8 terminals 8 terminals

Wichtigste Unterscheidungsmerkmale

  • Two independent SPST channels in one compact package (vs. ISL83483IBZ-T)
  • Documented 60 ohm on-resistance (vs. ISL8324IB)
  • Single-supply low-voltage architecture (vs. ISL83072EIBZA)

Designhinweise

Account for the specified 60 ohm on-resistance when the switch drives a high-impedance input, because the closed switch forms part of the signal path and can create attenuation or loading. Keep switched traces short and use a continuous ground reference. The exact off-resistance and leakage should be checked in the manufacturer datasheet before using the device as a high-impedance isolation gate.

Place the 8-SOIC device close to the routed signal nodes and keep the control pins away from sensitive analog traces. Use the package land pattern and pin-description table from the manufacturer datasheet. A compact layout helps minimize trace resistance and coupling, while separating control routing from measurement paths reduces the chance of switching transients appearing on the controlled signal.

Decouple the supply pin locally and connect the device ground to the system return without long loops. Do not assume that a single-supply analog switch can accept signal voltages outside the supply range. Review the absolute maximum ratings, recommended operating conditions, control thresholds, and maximum signal current before connecting external nodes.

Compliance-Informationen

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Bleifrei
Unknown
Halogenfrei
Unknown
Konfliktmineralien
Unknown

The available product references do not explicitly state the compliance status of the ISL8324IB-T. AEC-Q100 is not applicable to this analog switch unless an automotive-qualified variant is specifically identified.

Daten verifiziert am: 2026-11-10 – Daten geprüft und kuratiert vom Bauteil-Engineering-Team von XAIPART

Ähnliche Suchanfragen

ISL8324IB-T ISL8324IB-T datasheet ISL8324IB-T pinout ISL8324IB-T datasheet pdf ISL8324IB-T equivalent ISL8324IB-T replacement ISL8324IB-T cross reference ISL8324IB-T application circuit Renesas ISL8324IB-T ISL8324IB-T price ISL8324IB-T stock ISL8324IB-T vs ISL8324IB

Verwandte Bauteile & Begriffe

Renesas Electronics Intersil ISL8324IB-T ISL8324IB ISL83072EIBZA ISL83483IBZ-T dual SPST analog switch analog switch single-pole single-throw low-voltage switch single-supply circuit signal routing signal isolation on-resistance 60 ohm 1:1 configuration 8-SOIC SOIC package surface mount industrial temperature grade battery-powered equipment test-point routing analog control signal semiconductor
Schnellangebot-RFQ
Geben Sie alle Details an – unser Vertriebsteam antwortet innerhalb von 24 Stunden
Teilenummer Hersteller Gehäuse QTY Zielpreis Gesamt
✓
Angebotsanfrage gesendet!

Wir antworten innerhalb von 24 Stunden auf Ihre E-Mail

1
RFQ gesendet
2
Angebot erhalten
3
Bestellung aufgegeben
4
Zahlung
5
Versandt
6
Geliefert
RFQ-Details ansehen