Renesas Electronics

ISL8563ECB - 3V RS232/RS562 Transceiver | Renesas | 18-SOIC

Артикул: ISL8563ECB ✓ Активен
3.0 V to 5.5 V Vdss EIA/TIA-232 and EIA/TIA-562 Rds(on) 18-SOIC, 0.295 inch (7.50 mm) width Package
MOQ: 1 |

ISL8563ECB Обзор

Renesas ISL8563ECB is a dual RS232 and RS562 transceiver operating from a 3.0 V to 5.5 V supply in an 18-pin wide SOIC package. The integrated circuit combines two transmitters and two receivers, supports operation at up to 5 Mbps, and provides ±15 kV electrostatic-discharge protection on the RS-562 transmitter outputs and receiver inputs according to the manufacturer datasheet.

A transceiver is an interface integrated circuit that converts logic-level signals between a host controller and a physical communications link. The ISL8563E belongs to the RS232 transceiver category, where a transmitter translates CMOS/TTL levels into RS232-compatible levels and a receiver performs the inverse conversion. Supporting both EIA/TIA-232 and EIA/TIA-562 operation lets the same device serve conventional RS232 links and lower-voltage, higher-noise-tolerant RS562 applications while remaining a 3 V-compatible interface IC.

The principal operating features are a 3.0 V minimum supply, a 5.5 V maximum supply, two transmit channels, two receive channels, and 5 Mbps data-rate capability. Its broad supply range permits use in both 3.3 V and 5 V equipment. The manufacturer states that the transmitter and receiver circuits meet EIA/TIA-562 and EIA/TIA-232 specifications even when VCC is 3.0 V, providing design flexibility where the downstream system does not use a 5 V logic rail.

The ISL8563ECB also provides ±15 kV ESD protection on exposed RS-562 pins using the IEC 61000-4-2 air-gap and human-body-model methods. This protection is important on cables that leave an enclosure because electrostatic discharge events can otherwise damage a transceiver input or output. The 18-SOIC package is 0.295 inches, or 7.50 mm, wide and remains suitable for conventional surface-mount PCB assembly.

Typical applications include multi-drop industrial serial links, data acquisition equipment, instrumentation, POS terminals, industrial controllers, and communications interfaces requiring both RS232 and RS562 compatibility. In these systems, the device provides the electrical interface between a low-voltage digital controller and an external serial cable. Designers should select cable protection, grounding, and connector details for the installation because the IC cannot substitute for an earth-ground connection or complete surge-protection network.

A key design consideration is that the 18-SOIC footprint has 18 leads and requires a sufficiently wide land pattern; the package should not be confused with a narrow 8-pin SOIC. Review the manufacturer pin-description table before assigning signal names, and observe the stated supply range, receiver enable or shutdown behavior, and output-slew requirements during PCB review. The exposed interface pins should be routed away from unprotected board edges when practical.

This page organizes the verified technical characteristics, sourcing information, documented standards, and practical replacement considerations for engineers evaluating the ISL8563ECB. It also highlights the distinctions that matter when comparing this Renesas device with a 3.3 V RS562 transceiver in an 18-lead wide-SOIC package.

Аналоги без доработки для ISL8563ECB — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.

MAX563CWN+T

✅ Прямая замена
📦 18-pin WSOIC
3.3 V supply and EIA/TIA-562 focus versus 3.0-5.5 V operation and combined EIA/TIA-232/EIA/TIA-562 support on ISL8563ECB; shutdown receiver behavior also differs

📋 Справочный аналог (нет в каталоге)

ISL8563ECB Характеристики

Product Type Dual RS232 and RS562 transceiver
Transmitter Channels 2 channels
Receiver Channels 2 channels
Supply Voltage Range 3.0 V to 5.5 V
Minimum Operating Supply 3.0 V
Maximum Operating Supply 5.5 V
Maximum Data Rate 5 Mbps
Supported Standards EIA/TIA-232 and EIA/TIA-562
ESD Protection ±15 kV on RS-562 transmitter outputs and receiver inputs
ESD Test Method IEC 61000-4-2 air-gap and human-body-model methods
Корпус 18-SOIC, 0.295 inch (7.50 mm) width
Тип монтажа Surface mount
Статус RoHS Compliant

Руководство по цоколевке ISL8563ECB в корпусе 18-soic, 0.295 inch (7.50 mm) width

Цоколевка для ISL8563ECB (корпус 18-soic, 0.295 inch (7.50 mm) width). Нумерация выводов, функции и схемы подключения определены в техническом описании производителя. Обратитесь к нему для точного посадочного места и рекомендаций по пайке.

Схема цоколевки корпуса 18-soic, 0.295 inch (7.50 mm) width для ISL8563ECB

Нет подробных данных о распиновке для ISL8563ECB.

Обратитесь к даташиту для полной конфигурации выводов.

Типичное применение

ISL8563ECB подходит для 6 применениеs: Industrial Serial Data Acquisition, Instrumentation and Test Equipment, POS and Retail Terminal Interfaces, Embedded Controller Communication, Network and Communications Equipment, Medical and Diagnostic Equipment.

🏭

Industrial Serial Data Acquisition

The ISL8563ECB is appropriate for industrial measurement equipment that must collect data over RS232 or RS562 links. Two transmit channels and two receive channels allow one interface IC to serve bidirectional or multi-channel communication, while the 3.0 V to 5.5 V supply range supports 3.3 V and 5 V control hardware. Operation from a 3.0 V supply helps meet the stated EIA/TIA-232 and EIA/TIA-562 requirements in low-voltage systems. The ±15 kV ESD protection on exposed RS-562 pins adds useful connector-side resilience, although industrial installations still need correctly engineered grounding and surge protection.

🔧

Instrumentation and Test Equipment

The ISL8563ECB fits laboratory and production-test instruments that exchange commands and measurement data with external fixtures or computers. A 5 Mbps maximum data rate supports high-throughput serial communication, while the 18-pin wide-SOIC format remains compatible with conventional surface-mount assembly methods. The integrated transmitter and receiver channels reduce the number of separate interface components needed for bidirectional ports. Its 3.0 V minimum supply is especially useful where the instrument controller operates at 3.3 V and maintaining EIA/TIA-232 compatibility remains important.

🖥️

POS and Retail Terminal Interfaces

The ISL8563ECB can support serial links between retail terminals, receipt printers, scanners, and service equipment. Two receive channels are useful when a terminal must monitor more than one peripheral, while the transmitter channels support outbound command and status links. Its 3.0 V to 5.5 V operating range accommodates compact systems built around either 3.3 V or 5 V processors. The EIA/TIA-562 capability can provide greater tolerance for noisy point-to-point cabling than a purely logic-level interface, provided the cable and grounding arrangement are appropriate.

🧩

Embedded Controller Communication

The ISL8563ECB gives an embedded controller a compact interface to RS232 or RS562 peripherals without requiring separate driver and receiver ICs. Its 3.0 V minimum operating voltage permits use with 3.3 V control logic, while operation up to 5.5 V supports legacy 5 V systems. The 18-pin wide-SOIC package provides adequate lead spacing for automated assembly and inspection. Designers should place supply decoupling close to the device, preserve the datasheet's enable and shutdown connections, and use a connector design that supports the required cable shield and signal-ground arrangement.

🌐

Network and Communications Equipment

The ISL8563ECB is suitable for communication equipment that uses RS232 or RS562 for local management, configuration, or service ports. The 5 Mbps capability supports short, controlled links between equipment and maintenance systems, while the dual-channel organization can simplify multiport equipment. The device's ability to operate at a 3.0 V supply is useful in modern 3.3 V network hardware. Installation requirements remain important because long unshielded cables can introduce noise and reflections; use controlled-impedance routing where appropriate and avoid treating the ESD rating as a substitute for external surge suppression.

💊

Medical and Diagnostic Equipment

The ISL8563ECB can be used in diagnostic and monitoring equipment requiring a legacy serial connection to a host computer, analyzer, or service interface. Two transmitters and two receivers allow bidirectional and multi-channel links within one package, and the 3.0 V to 5.5 V supply range supports both low-voltage portable platforms and 5 V instruments. The documented ±15 kV ESD protection on connector-facing RS-562 pins improves robustness against routine electrostatic discharge. Medical-system qualification, isolation, and applicable regulatory requirements must be evaluated independently for the complete equipment.

What is the operating voltage of the ISL8563ECB?
The ISL8563ECB operates from 3.0 V to 5.5 V. According to the manufacturer datasheet, its transmitters and receivers meet the EIA/TIA-562 and EIA/TIA-232 specifications even with VCC at the 3.0 V minimum. This makes the device suitable for systems using either 3.3 V or 5 V logic supplies without requiring a dedicated 5 V transceiver rail.
What type of transceiver is the ISL8563ECB?
The ISL8563ECB is a dual RS232 and RS562 transceiver containing two transmitters and two receive channels. The manufacturer identifies it as a 2/2 transceiver supporting full RS232 and RS562 operation. It converts between low-voltage digital logic and balanced serial-interface levels, making it suitable for instrument, controller, terminal, and data-acquisition interfaces.
Where can I download the ISL8563ECB datasheet PDF?
The ISL8563ECB datasheet PDF is available from the manufacturer-documentation link listed on this page. The document describes the 3.0 V to 5.5 V supply range, EIA/TIA-232 and EIA/TIA-562 operation, ±15 kV ESD protection, and the electrical characteristics. Use the package drawings and pin-description table when creating the PCB footprint and assigning signals.
Where can I find the ISL8563ECB pinout?
The ISL8563ECB pinout is published in the pin-description table and package drawing in the manufacturer datasheet. The device is an 18-pin wide-SOIC package measuring 0.295 inches, or 7.50 mm, across the lead span. Because pin functions include interface enables and shutdown-related connections, use the datasheet table rather than inferring positions from a generic transceiver diagram.
What is the maximum data rate of the ISL8563ECB?
The ISL8563ECB supports data rates up to 5 Mbps. The manufacturer also states that its transmitters and receivers meet EIA/TIA-232 and EIA/TIA-562 requirements at a 3.0 V supply. Cable length, loading, connector construction, and signal-integrity losses can reduce practical reach, so the 5 Mbps figure should not be treated as a guarantee for every RS232 cable installation.
Does the ISL8563ECB include ESD protection?
Yes. The ISL8563ECB provides ±15 kV ESD protection on the RS-562 transmitter outputs and receiver inputs. The manufacturer datasheet identifies the IEC 61000-4-2 air-gap and human-body-model test methods for this protection. External cable transients, including surge events, may still require separate suppression and grounding measures beyond the IC's specified ESD capability.
Is the ISL8563ECB suitable for 3.3 V industrial equipment?
The ISL8563ECB is suitable for 3.3 V equipment because its specified supply range is 3.0 V to 5.5 V and its RS232 and RS562 performance is maintained at a 3.0 V supply. The interface can therefore operate directly from a regulated 3.3 V rail. Confirm the complete power budget, exposed-pin conditions, and operating-temperature requirements against the manufacturer datasheet before release.
ISL8563ECB versus MAX563CWN+T: which transceiver fits a 3.3 V design?
The ISL8563ECB provides the broader stated supply range of 3.0 V to 5.5 V, while the MAX563CWN+T is described as a 3.3 V-powered EIA/TIA-562 dual transceiver. Both use an 18-lead wide-SOIC-class package and can suit 3.3 V systems, but the ISL8563ECB also explicitly supports EIA/TIA-232. Review shutdown behavior and every pin before treating the MAX563CWN+T as a drop-in replacement.
What can replace the ISL8563ECB?
The MAX563CWN+T is the closest documented alternative because it is a dual 3.3 V EIA/TIA-562 transceiver in an 18-pin WSOIC package. It adds a distinction from the ISL8563ECB: its receivers remain active during shutdown and it is not identified as an RS232 device. Verify pin functions, enable polarity, supply limits, and transceiver behavior before using it as a replacement.
What is the best drop-in replacement for the ISL8563ECB?
The MAX563CWN+T is a documented 18-pin WSOIC alternative for 3.3 V EIA/TIA-562 applications, but it is not a universally equivalent substitute because the ISL8563ECB also supports EIA/TIA-232 and has a 3.0 V to 5.5 V supply range. For a genuine drop-in production decision, compare the complete pin descriptions and operating modes. Use the Renesas cross-reference tool to identify additional approved options.
When should I choose the ISL8563ECB over the MAX563CWN+T?
Choose the ISL8563ECB when the interface must support both EIA/TIA-232 and EIA/TIA-562, operate across a 3.0 V to 5.5 V supply range, or include the documented ±15 kV ESD protection on exposed RS-562 pins. The MAX563CWN+T may be suitable for a 3.3 V-only EIA/TIA-562 design when its shutdown and receiver behavior meet the system requirements.
Is the ISL8563ECB suitable for industrial serial communication?
The ISL8563ECB fits industrial serial interfaces that require EIA/TIA-232 or RS562 operation at 3.0 V to 5.5 V. Its dual transmit and receive channels support multi-channel equipment, while the ±15 kV ESD protection adds protection for connector-facing RS-562 pins. Industrial deployments should still include appropriate cable grounding, surge protection, isolation strategy, and environmental qualification.
How should the ISL8563ECB be placed on an 18-SOIC PCB?
Use the manufacturer package drawing to create a wide-SOIC land pattern for the 18-pin ISL8563ECB, which has a 0.295-inch, or 7.50 mm, body width. Place input and output decoupling close to the supply pins, provide an uninterrupted ground plane, and route connector-facing RS-562 lines away from fast digital nets. Confirm exposed-pin assignments and unused-pin requirements in the datasheet.
Where can I buy the ISL8563ECB and check current availability?
Use the Request a Quote form on this page to ask about ISL8563ECB availability, current commercial terms, and lead time. The form routes the request through XAIPART without requiring you to rely on a static price or inventory claim that may become outdated. Provide the required 18-SOIC package, quantity, and delivery destination in the request.
What is the price of the ISL8563ECB?
The current commercial price for the ISL8563ECB is best requested through the Request a Quote form on this page. Quote pricing can depend on quantity, package configuration, scheduled orders, and supply conditions, so a static unit price would not represent a durable commitment. The form can provide current unit pricing and a quantity-break proposal for the exact MPN.
What is the lead time for the ISL8563ECB?
Request the current ISL8563ECB lead time through the Request a Quote form on this page, including your required quantity, shipment date, and destination. Lead time can change with market availability and production scheduling, particularly for legacy RS232 interface devices. The form allows XAIPART to confirm a delivery estimate against the actual procurement requirement.
Is the ISL8563ECB in stock?
The current ISL8563ECB inventory position should be confirmed through the Request a Quote form on this page. Stock can vary by manufacturer, package, and order quantity, and a listing status alone does not guarantee material immediately available for allocation. Include your required quantity, acceptable packaging, and target delivery date when submitting the request.

Справочные инженерные данные для ISL8563ECB — сравнение, рекомендации по проектированию и информация о соответствии.

Руководство по выбору

Choose the ISL8563ECB when the board needs a dual RS232 and RS562 interface operating from 3.0 V to 5.5 V, especially when connector-facing pins require the documented ±15 kV ESD protection. Its dual transmitters and dual receivers suit bidirectional communication and multi-channel equipment without requiring separate interface ICs. The MAX563CWN+T is the documented alternative for a 3.3 V EIA/TIA-562 design using an 18-pin WSOIC, and it may be appropriate when active receivers during shutdown are desirable. However, it is not identified as an EIA/TIA-232 device and its supply and shutdown behavior differ. Before substitution, compare every pin, enable level, output state, and supply requirement rather than relying on package size alone.

Сравнение с аналогами

Параметр Этот товар MAX563CWN+T
Package 18-SOIC, 0.295 inch (7.50 mm) width 18-pin WSOIC
Brand Renesas Electronics Maxim Integrated
Product Type Dual RS232 and RS562 transceiver Dual EIA/TIA-562 transceiver
Transmitter Channels 2 channels 2 channels
Receiver Channels 2 channels 2 channels
Supply Voltage Range 3.0 V to 5.5 V 3.3 V powered
Communication Standards EIA/TIA-232 and EIA/TIA-562 EIA/TIA-562

Ключевые отличия

  • Broader supported communication standard set (против MAX563CWN+T)
  • Wider supply-voltage operating range (против MAX563CWN+T)
  • Documented ESD protection on connector-facing RS-562 pins (против MAX563CWN+T)

Заметки по проектированию

Create the PCB footprint from the manufacturer drawing for the 18-SOIC package rather than using a generic narrow-SOIC pattern. The documented body width is 0.295 inch, or 7.50 mm, so lead span and row spacing must match that drawing. Place the power-decoupling capacitor close to VCC and ground, and provide a low-impedance ground-plane path beneath the transceiver. Confirm exposed and enable-related pin assignments against the pin-description table before routing.

Do not assume every 18-lead RS562 transceiver is pin- and behavior-compatible. The ISL8563ECB supports a 3.0 V to 5.5 V supply and both EIA/TIA-232 and EIA/TIA-562, while the MAX563CWN+T is described as a 3.3 V EIA/TIA-562 device with active receivers during shutdown. Check supply limits, enable polarity, receiver outputs, transmitter pins, and shutdown states before approving a substitution. PCB artwork compatibility alone does not establish electrical equivalence.

Treat connector-facing RS-562 nets as potential high-voltage and high-transient nodes even though the IC specifies ±15 kV ESD protection. Keep those traces away from clocks, data buses, and analog inputs; provide a direct return path; and use chassis or board grounding consistent with the installation. If cables leave the enclosure or cross industrial environments, add appropriately rated surge and overvoltage protection rather than relying solely on the transceiver's internal ESD structures.

Operate the ISL8563ECB only within its specified 3.0 V to 5.5 V supply range. If the system rail can overshoot during power-off or hot-plug events, verify that the transient remains within the absolute maximum limits in the manufacturer datasheet. A 3.3 V supply is within range, but noise on the rail can affect communication margin; include local high-frequency bypass and keep the supply return path short.

Информация о соответствии

RoHS
Compliant
REACH
Unknown
AEC-Q100
Not Applicable
Без свинца
Unknown
Без галогенов
Unknown
Конфликтные минералы
Unknown

The product listing identifies the ISL8563ECB as RoHS compliant. The manufacturer datasheet documents ±15 kV ESD protection tested under IEC 61000-4-2 air-gap and human-body-model methods; this is an ESD test method rather than product-level IEC certification. Other compliance attributes are unknown.

Данные проверены: 2026-11-15 — данные проверены и курируются командой компонентной инженерии XAIPART

Похожие запросы

ISL8563ECB datasheet ISL8563ECB pinout ISL8563ECB datasheet pdf ISL8563ECB equivalent ISL8563ECB replacement ISL8563ECB cross reference ISL8563ECB vs MAX563CWN+T ISL8563ECB 18 SOIC footprint ISL8563ECB application circuit Renesas ISL8563ECB ISL8563ECB price ISL8563ECB stock ISL8563ECB 3.3V RS562 transceiver

Связанные компоненты & термины

Renesas Electronics ISL8563ECB ISL8563E MAX563CWN+T Maxim Integrated RS232 transceiver RS562 transceiver dual transceiver interface IC line driver line receiver CMOS logic EIA/TIA-232 EIA/TIA-562 IEC 61000-4-2 RoHS 18-SOIC wide SOIC surface-mount package 3.3 V logic 5 Mbps data rate ESD protection industrial serial communication medical diagnostic equipment RS232 interface
Быстрый запрос цены (RFQ)
Заполните все данные — наша команда продаж ответит в течение 24 часов
Артикул Производитель Корпус QTY Целевая цена Итого
✓
Запрос цены отправлен!

Мы ответим на ваш email в течение 24 часов

1
RFQ отправлен
2
Предложение получено
3
Заказ оформлен
4
Оплата
5
Отправлено
6
Доставлено
Просмотреть детали RFQ