Microchip Technology

KSZ9031RNXVA - Automotive Gigabit Ethernet PHY | Microchip

Артикул: KSZ9031RNXVA ✓ Активен
1.8 V, 2.5 V, and 3.3 V Vdss 10BASE-T, 100BASE-TX, and 1000BASE-T Rds(on) 48-pin WQFN with exposed pad Package 10 Mbps, 100 Mbps, and 1000 Mbps Speed
MOQ: 1 |

KSZ9031RNXVA Обзор

The Microchip Technology KSZ9031RNXVA is an automotive-qualified, integrated triple-speed Ethernet physical-layer transceiver supporting 10BASE-T, 100BASE-TX, and 1000BASE-T operation. It provides one Gigabit Ethernet port with RGMII support, operates from a 1.8 V, 2.5 V, or 3.3 V supply, and is packaged in a 48-pin WQFN with an exposed pad measuring 7 mm by 7 mm. The device also incorporates LinkMD cable diagnostics for detecting wiring faults and estimating cable length.

An Ethernet PHY is the physical-layer component in a network interface, translating digital data from a media-access controller into electrical signals suitable for twisted-pair cabling and converting received signals back into digital data. The KSZ9031 belongs to the Gigabit Ethernet transceiver family, the Ethernet interface IC hierarchy, and the broader semiconductor and network-interface categories. Its integrated PHY reduces the number of external active components needed in an automotive Ethernet endpoint.

Key features include support for all three common Ethernet rates through one port, RGMII connectivity, 1.8 V to 3.3 V core-voltage options, and an automotive qualification. The RGMII implementation supports programmable clock and data delay paths, including internal delay options described for RGMII Version 2.0 timing. These features help engineers reconcile MAC-to-PHY timing across voltage, temperature, and board-routing variations.

Technically, the KSZ9031 combines transmit, receive, analog front-end, clocking, and cable-diagnostic functions in one package. Its exposed thermal pad supports heat transfer from the device into the PCB, while the 7 mm by 7 mm WQFN format maintains a compact footprint for automotive control units, infotainment platforms, vehicle gateways, and other networked equipment. The manufacturer identifies the KSZ9031 as an automotive-qualified triple-speed PHY with LinkMD diagnostics.

Typical applications include automotive Ethernet gateways, advanced driver-assistance systems, vehicle infotainment controllers, telematics units, industrial Ethernet equipment, and other embedded systems requiring 10/100/1000-Mbps copper connectivity. In an RGMII design, the PHY connects to an Ethernet MAC through the parallel RGMII data and clock interface and to an RJ45 or automotive connector through a magnetics-based network path.

Designers should preserve the recommended magnetic component and layout topology, keep the RGMII clock and data routing short, and account for the exposed pad with a properly designed ground and thermal-copper pattern. Review the KSZ9031RNX datasheet and its errata for register initialization, delay selection, automotive grade details, package dimensions, and silicon-revision-specific corrections.

This page consolidates the identified interface capabilities, same-family drop-in options, package information, sourcing guidance, and engineering-oriented comparison data to support faster component evaluation and board-level decision-making.

Аналоги без доработки для KSZ9031RNXVA — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.

Варианты в этой серии

Модели той же серии, совместимые без доработки с KSZ9031RNXVA (тот же форм-фактор и посадочное место) — отличается по Product Type, Package, Automotive Qualification, MAC Interface, Operating Temperature.

Microchip Technology
Product Type: Ethernet Physical Layer Transceiver (PHY)
Package: 48-pin QFN (7x7 mm)
MAC Interface: RGMII (Version 2.0 compliant, on-chip delay)
Сравнить с KSZ9031RNXVA →
Microchip Technology
Package: 48-pin QFN (7x7 mm)
MAC Interface: RGMII / GMII / MII
Operating Temperature: -40C to +85C (industrial)
Сравнить с KSZ9031RNXVA →
Microchip Technology
Product Type: 10/100/1000 Mbps Ethernet PHY transceiver
Package: 48-VFQFN with exposed pad
Automotive Qualification: Automotive qualified
Сравнить с KSZ9031RNXVA →
Microchip Technology
Product Type: Ethernet Transceiver (PHY)
MAC Interface: RGMII/GMII/MII
Сравнить с KSZ9031RNXVA →
Microchip Technology
Product Type: Ethernet Transceiver (PHY)
Package: 48-pin WQFN (wettable-flank)
Automotive Qualification: AEC-Q100 qualified (VAO suffix)
Сравнить с KSZ9031RNXVA →

KSZ9031RNXVB-VAO

✅ Прямая замена
Microchip Technology
📦 48-pin WQFN (7 mm x 7 mm)
Ethernet Transceiver (PHY) · 10/100/1000 Mbps · IEEE 802.3 10BASE-T, 100BASE-TX, 1000BASE-T · RGMII (Version 2.0 compliant, on-chip delay) · 3.3 V (single supply; internal LDO for core) · 3.3 V / 2.5 V / 1.8 V · 48-pin WQFN (wettable-flank) · -40C to +105C (AEC-Q100 Grade 2)

Уточнить цену

Открыть даташит →

KSZ9031RNXIC-TR

✅ Прямая замена
Microchip Technology
📦 48-pin WQFN (7 mm x 7 mm)
Ethernet Physical Layer Transceiver (PHY) · 10Base-T, 100Base-TX, 1000Base-T (IEEE 802.3, 802.3u, 802.3ab) · 1 · 10/100/1000 Mbps · RGMII / GMII / MII · 1.2 V · 1.8 V · 1.8 V / 2.5 V / 3.3 V

Уточнить цену

Открыть даташит →

KSZ9031RNXUA

✅ Прямая замена ⚠️ Характеристики не проверены
Microchip Technology
📦 48-pin WQFN (7 mm x 7 mm)
10/100/1000 Mbps Ethernet PHY transceiver · 10 Mbps, 100 Mbps, and 1000 Mbps · 10Base-T, 100Base-TX, and 1000Base-T · IEEE 802.3 · RGMII · On-chip delay with programming options for external delay and adjustment · 2.0 · LinkMD

Уточнить цену

Открыть даташит →

KSZ9031RNXUB-TRVAO

✅ Прямая замена ⚠️ Характеристики не проверены
Microchip Technology
📦 48-pin WQFN (7 mm x 7 mm)
Ethernet Transceiver (PHY) · 10Base-T/100Base-TX/1000Base-T · RGMII/GMII/MII · 4/4 · Full · 1.8V, 2.5V, 3.3V · 48-pin WQFN (wettable flank) · Surface Mount

Уточнить цену

Открыть даташит →

KSZ9031RNXVA Характеристики

Product Type Integrated triple-speed Ethernet physical-layer transceiver
Ethernet Port Count 1 port
Supported Ethernet Speeds 10 Mbps, 100 Mbps, and 1000 Mbps
Supported Standards 10BASE-T, 100BASE-TX, and 1000BASE-T
Media Interface RGMII
RGMII Timing RGMII Version 2.0 with internal and external delay programming options
Supply Voltage Options 1.8 V, 2.5 V, and 3.3 V
Cable Diagnostics LinkMD
Automotive Qualification AEC-Q100 Grade 2
Package Type 48-pin WQFN with exposed pad
Package Dimensions 7 mm x 7 mm
Тип монтажа Surface mount
Device Classification Automotive Ethernet transceiver
Transmit and Receive Paths 4/4 full-duplex transceiver arrangement

Руководство по цоколевке KSZ9031RNXVA в корпусе 7 mm x 7 mm

Цоколевка для KSZ9031RNXVA (корпус 7 mm x 7 mm). Нумерация выводов, функции и схемы подключения определены в техническом описании производителя. Обратитесь к нему для точного посадочного места и рекомендаций по пайке.

Схема цоколевки корпуса 7 mm x 7 mm для KSZ9031RNXVA

Нет подробных данных о распиновке для KSZ9031RNXVA.

Обратитесь к даташиту для полной конфигурации выводов.

Типичное применение

KSZ9031RNXVA подходит для 6 применениеs: Automotive Ethernet Gateway, Advanced Driver Assistance Network, Vehicle Infotainment Controller, Industrial Ethernet Equipment, Robotics and Machine Control, Networked Test and Measurement.

🚗

Automotive Ethernet Gateway

The KSZ9031RNXVA fits an automotive gateway that must reconcile legacy 10BASE-T devices, 100BASE-TX links, and Gigabit Ethernet traffic through one physical network port. Its support for 10/100/1000BASE-T reduces the need for separate PHY solutions at different link rates. The RGMII Version 2.0 timing support and programmable TX and RX delay paths are valuable because a gateway MAC, multilayer PCB, connector, and automotive cable path each contribute timing uncertainty. With a 1.8 V, 2.5 V, or 3.3 V supply option, the PHY can also align with different vehicle Ethernet-platform power rails. The exposed-pad WQFN requires adequate PCB copper and via distribution for thermal dissipation. LinkMD cable diagnostics add field-maintenance value by helping identify wiring faults in vehicle network harnesses where physical troubleshooting is difficult.

🚗

Advanced Driver Assistance Network

The KSZ9031RNXVA is suitable for an ADAS controller or sensor gateway requiring a high-speed copper Ethernet connection while retaining compatibility with lower-rate vehicle networks. Gigabit operation supports transfer of camera, radar, and sensor-fusion data, while automatic 10/100/1000BASE-T support allows the same PHY design to connect across multiple Ethernet link speeds. Programmable RGMII clock and data delay helps engineers tune the MAC-to-PHY interface for a multilayer board and controlled-length vehicle harness. The automotive Grade 2 classification aligns with many ADAS platforms, although the exact vehicle temperature requirement must be checked. Use a controlled-impedance layout with short RGMII routing, manufacturer-recommended magnetics or automotive network termination, and a properly connected exposed pad. LinkMD can assist commissioning by revealing cable or connector problems after installation.

📺

Vehicle Infotainment Controller

The KSZ9031RNXVA can provide the Ethernet physical layer for an infotainment head unit, telematics controller, or zonal compute platform that exchanges multimedia and diagnostic traffic over copper Ethernet. Supporting all three common Ethernet rates allows the controller to connect with service tools, displays, cameras, and vehicle backbones operating at different speeds. The RGMII interface connects directly to a compatible Ethernet MAC and supports programmable timing compensation for transmit and receive paths. Supply options of 1.8 V, 2.5 V, and 3.3 V provide flexibility when integrating with multiple logic rails. Because infotainment systems can be thermally constrained, the 7 mm by 7 mm WQFN should be placed on an effective copper plane with vias connecting the exposed pad to lower layers. Validate EMC, magnetics, and return-path design against the manufacturer reference layout before production release.

🏭

Industrial Ethernet Equipment

The KSZ9031RNXVA is suitable for industrial controllers, motor-control systems, and networked factory equipment requiring one copper Ethernet port with broad compatibility. The integrated PHY handles 10BASE-T, 100BASE-TX, and 1000BASE-T, allowing equipment to communicate with legacy controllers and modern Gigabit infrastructure. RGMII Version 2.0 support and configurable delay paths provide implementation flexibility, but industrial products should still be verified for the required temperature range and EMC environment. A 1.8 V, 2.5 V, or 3.3 V operating option helps align the PHY with industrial logic and MCU ecosystems. Follow the manufacturer’s reference magnetic-component layout, provide continuous return paths, and use the exposed pad as both a thermal and electrical-ground feature. LinkMD diagnostics can improve field service by identifying cable faults without relying only on the primary link-status indication.

🤖

Robotics and Machine Control

The KSZ9031RNXVA can serve as the Gigabit Ethernet physical layer in a robot controller, machine vision processor, or industrial edge node. A single PHY that supports 10, 100, and 1000 Mbps simplifies interoperability with cameras, programmable-logic controllers, engineering workstations, and service equipment operating on different Ethernet rates. The RGMII interface provides a direct path to an Ethernet MAC, while programmable clock and data delays help maintain timing margins between the MAC and PHY on a multilayer PCB. The 48-pin WQFN footprint supports compact control hardware, although its exposed pad must be connected to adequate ground copper and thermal vias. Use the manufacturer reference network and approved magnetic components to control insertion loss, common-mode performance, and radiated emissions. LinkMD diagnostics can help maintenance personnel distinguish network-cable faults from controller or software failures.

🖥️

Networked Test and Measurement

The KSZ9031RNXVA can support networked instrumentation, data-acquisition equipment, and communication analyzers that need a compact Gigabit Ethernet front end. Triple-speed support improves compatibility with laboratory infrastructure and embedded test nodes, while RGMII timing options allow the PHY to be matched to a chosen MAC and board implementation. The device’s 1.8 V, 2.5 V, or 3.3 V supply flexibility can simplify integration with multiple instrumentation logic families. For high-throughput measurements, use a short controlled-impedance RGMII connection, a continuous ground plane, and manufacturer-recommended network components to avoid signal-integrity degradation. The exposed pad requires a distributed via array and adequate copper area to remove local heat. Before production, verify the exact ordering suffix, automotive qualification requirements, cable reach, and errata applicable to the selected silicon revision.

What is the KSZ9031RNXVA?
The KSZ9031RNXVA is a Microchip Technology automotive Gigabit Ethernet physical-layer transceiver with one port and RGMII connectivity. It supports 10BASE-T, 100BASE-TX, and 1000BASE-T operation from a 1.8 V, 2.5 V, or 3.3 V supply. According to the Microchip KSZ9031 product page and KSZ9031RNX datasheet, it integrates triple-speed Ethernet operation with LinkMD cable diagnostics in a 48-pin WQFN package measuring 7 mm by 7 mm.
Where can I download the KSZ9031RNXVA datasheet PDF?
The KSZ9031RNXVA datasheet PDF is available through the official Microchip KSZ9031RNX data-sheet link on this page. The identified document is DS00002117J and describes the integrated 10/100/1000BASE-T Ethernet PHY, RGMII timing behavior, LinkMD diagnostics, register configuration, and package details. Use the KSZ9031RNX errata in addition to the data sheet because silicon-revision-specific corrections can affect device operation.
Where can I find the KSZ9031RNXVA pinout?
The KSZ9031RNXVA pin assignment is located in the pin-description and package-drawing sections of the official KSZ9031RNX data sheet. The device uses a 48-pin WQFN package with an exposed pad, so the exposed-pad connection and thermal requirements must be read from the same package information. Use the manufacturer pin table rather than relying on an equivalent family member when assigning PCB nets.
Which Ethernet speeds does the KSZ9031RNXVA support?
The KSZ9031RNXVA supports 10 Mbps, 100 Mbps, and 1000 Mbps operation in one integrated Ethernet PHY. According to the Microchip product page, the supported copper standards are 10BASE-T, 100BASE-TX, and 1000BASE-T. This makes the device suitable for an Ethernet MAC that must interoperate with legacy 10-Mbps and 100-Mbps links while supporting Gigabit connections.
What interface does the KSZ9031RNXVA use with an Ethernet MAC?
The KSZ9031RNXVA uses the Reduced Gigabit Media Independent Interface, or RGMII, for connection to an Ethernet MAC. The Microchip datasheet states that on-chip data-to-clock delay supports RGMII Version 2.0 timing, while programming options allow external delay and adjustment of transmit and receive timing paths. This timing control is important when compensating for PCB trace delay.
What is LinkMD cable diagnostics on the KSZ9031RNXVA?
LinkMD is the integrated cable-diagnostics feature in the KSZ9031 family and is used to evaluate copper-cable wiring conditions. The Microchip KSZ9031 product page identifies LinkMD as a defining feature of this triple-speed Ethernet PHY. LinkMD complements normal link operation by helping a system detect cable-related faults, making it useful for automotive and industrial systems that require more maintainable field wiring.
Is the KSZ9031RNXVA suitable for automotive applications?
Yes, the KSZ9031RNXVA is an automotive Ethernet PHY, and the family information identifies the VA and VB variants as AEC-Q100 Grade 2 qualified. According to the KSZ9031RNX documentation, the UA and UB variants are Grade 3, while the VA and VB variants are Grade 2. Confirm temperature and production requirements against the complete ordering information before releasing a vehicle-platform design.
What can replace the KSZ9031RNXVA?
The KSZ9031RNXVB-VAO is the closest documented same-family replacement candidate because it is a KSZ9031 Grade 2 variant offered in the same QFN-48 form factor. The identified comparison describes matching primary technical profiles. However, a true drop-in decision also requires checking the exact suffix, tape-and-reel orientation, exposed-pad layout, register compatibility, and silicon errata. Use the Request a Quote form on this page to confirm availability for the exact replacement MPN.
Is the KSZ9031RNXVA the same as the KSZ9031RNXVB-VAO?
The KSZ9031RNXVA and KSZ9031RNXVB-VAO are closely related KSZ9031 Grade 2 devices, and the identified comparison reports no measurable differences in their primary technical parameters. They share the QFN-48 package family and automotive Ethernet PHY function. The VA and VB suffixes can still encode ordering, qualification, or marking distinctions, so engineers should verify the manufacturer ordering table and errata before treating the parts as interchangeable.
When should I choose the KSZ9031RNXVA over another KSZ9031 variant?
Choose the KSZ9031RNXVA when the design requires an automotive Grade 2, triple-speed 10/100/1000BASE-T Ethernet PHY with RGMII and LinkMD diagnostics in a 48-pin WQFN. Select another suffix only after matching its exact AEC-Q100 grade, temperature range, package, tape orientation, and ordering code to the vehicle program. The VA suffix is most appropriate when its Grade 2 designation matches the platform requirements.
KSZ9031RNXVA vs KSZ9031RNXVB-VAO: which is better for an automotive gateway?
Both devices are appropriate candidates for an automotive gateway when their exact ordering suffixes match the required Grade 2 qualification and production configuration. The identified comparison reports identical primary performance profiles, while the KSZ9031RNXVB-VAO is explicitly listed as a same-family alternative. The deciding factors are therefore exact suffix requirements, package orientation, lifecycle, and current availability rather than a material difference in basic Ethernet performance.
How should RGMII timing be handled in a KSZ9031RNXVA design?
Configure the KSZ9031RNXVA transmit and receive delay paths to match the MAC timing and physical PCB routing. The manufacturer data sheet identifies internal on-chip data-to-clock delay under RGMII Version 2.0, plus programming choices for external delay and correction of both TX and RX paths. Validate the final setting with the actual MAC, layer, cable, and board stack-up rather than relying only on nominal device timing.
What layout considerations matter for the KSZ9031RNXVA?
The KSZ9031RNXVA layout must follow the manufacturer’s reference network, magnetic-component placement, decoupling, and exposed-pad guidance. Keep RGMII clock and data routing short, control impedance consistently, and provide a low-impedance thermal path through the exposed pad. The 7 mm by 7 mm WQFN package can dissipate heat into the PCB, but thermal performance still depends on copper area, via distribution, and the enclosure’s heat-transfer path.
What are the key specifications of KSZ9031RNXVA that engineers should know?
The KSZ9031RNXVA is a one-port, automotive-qualified, triple-speed Ethernet PHY. Its headline specifications are support for 10BASE-T, 100BASE-TX, and 1000BASE-T; 1.8 V, 2.5 V, and 3.3 V supply options; RGMII Version 2.0 timing support; and LinkMD diagnostics. The package is a 48-pin WQFN with an exposed pad and a 7 mm by 7 mm body.
Where can I buy KSZ9031RNXVA and check its price and lead time?
Use the Request a Quote form on this page to request KSZ9031RNXVA pricing, current lead time, stock confirmation, and order quantities. The exact MPN is an automotive 48-pin WQFN Ethernet PHY, so supply should be checked against the required suffix and reel configuration. The form provides a direct purchasing path without relying on an outdated catalog price or an unverified stock claim.

Справочные инженерные данные для KSZ9031RNXVA — сравнение, рекомендации по проектированию и информация о соответствии.

Руководство по выбору

Choose the KSZ9031RNXVA for an automotive Ethernet design that requires a one-port 10/100/1000BASE-T PHY, RGMII Version 2.0 connectivity, LinkMD diagnostics, and Grade 2 qualification in a 48-pin WQFN. The KSZ9031RNXVB-VAO is the strongest documented drop-in candidate when its complete ordering configuration matches the target. The KSZ9031RNXIC-TR may suit a production arrangement requiring that exact suffix, but its qualification and ordering details must be confirmed. The KSZ9031RNXUA and KSZ9031RNXUB are Grade 3 options and are not appropriate substitutes when the vehicle program specifically requires the KSZ9031RNXVA’s Grade 2 rating. For any candidate, verify register compatibility, tape orientation, silicon-revision errata, magnetic-component requirements, and the complete exposed-pad layout before approving a replacement.

Сравнение с аналогами

Параметр Этот товар KSZ9031RNXVB-VAO KSZ9031RNXIC-TR KSZ9031RNXUA KSZ9031RNXUB
Brand Microchip Technology Microchip Technology Microchip Technology Microchip Technology Microchip Technology
Package 48-pin WQFN (7 mm x 7 mm) 48-pin QFN (7 mm x 7 mm) QFN-48 (7 mm x 7 mm) 48-pin WQFN (7 mm x 7 mm) 48-pin WQFN (7 mm x 7 mm)
Ethernet Port Count 1 port 1 port 1 port 1 port 1 port
Supported Ethernet Speeds 10/100/1000 Mbps 10/100/1000 Mbps 10/100/1000 Mbps 10/100/1000 Mbps 10/100/1000 Mbps
Supported Standards 10BASE-T, 100BASE-TX, 1000BASE-T 10BASE-T, 100BASE-TX, 1000BASE-T 10BASE-T, 100BASE-TX, 1000BASE-T 10BASE-T, 100BASE-TX, 1000BASE-T 10BASE-T, 100BASE-TX, 1000BASE-T
Media Interface RGMII RGMII RGMII RGMII RGMII
Cable Diagnostics LinkMD LinkMD LinkMD LinkMD LinkMD

Ключевые отличия

  • Single-port support for all three common Ethernet rates (против KSZ9031RNXIC-TR)
  • Automotive Grade 2 qualification (против KSZ9031RNXUA)
  • RGMII Version 2.0 timing support with configurable delay paths (против KSZ9031RNXVB-VAO)
  • Integrated LinkMD diagnostics (против KSZ9031RNXUB)

Заметки по проектированию

Use the manufacturer reference layout for the RGMII interface, network magnetics or automotive termination, supply decoupling, and exposed pad. Keep RGMII clock and data traces short, length-matched as required by the MAC interface specification, and routed over a continuous reference plane. Avoid plane splits beneath the high-speed interface because any return-path discontinuity can increase jitter and radiated emissions.

The exposed pad is the primary path for heat transfer from this 48-pin WQFN device. Connect it to ground according to the manufacturer package drawing and distribute multiple thermal vias into the internal ground planes. The 7 mm by 7 mm package can operate in space-constrained automotive equipment, but adequate copper area and enclosure heat flow are still required to limit junction temperature.

Validate RGMII timing with the selected MAC, PCB stack-up, and operating conditions. The KSZ9031RNX supports programmable internal and external delay for TX and RX paths, so use those controls to compensate for controller and board timing rather than adding unnecessary passive delay components. Confirm the final configuration with eye-diagram, jitter, and interoperability testing in the completed system.

Do not assume that every KSZ9031 suffix is an exact production substitute. Check AEC-Q100 grade, temperature range, package orientation, tape-and-reel configuration, ordering code, and silicon-revision errata. In particular, the Grade 2 VA variant should not be substituted with a Grade 3 UA or UB variant when the vehicle program requires the higher temperature grade.

Информация о соответствии

RoHS
Unknown
REACH
Unknown
AEC-Q100
Qualified
Без свинца
Unknown
Без галогенов
Unknown
Конфликтные минералы
Unknown

The KSZ9031RNXVA is identified as an AEC-Q100 Grade 2 automotive part. RoHS, REACH, lead-free, halogen-free, and conflict-minerals status were not established from the identified records.

Похожие запросы

KSZ9031RNXVA datasheet KSZ9031RNXVA datasheet pdf KSZ9031RNXVA pinout KSZ9031RNXVA equivalent KSZ9031RNXVA replacement KSZ9031RNXVA vs KSZ9031RNXVB-VAO KSZ9031RNXVA price KSZ9031RNXVA stock Microchip KSZ9031RNXVA KSZ9031RNXVA WQFN-48 footprint KSZ9031RNXVA automotive Ethernet PHY KSZ9031RNXVA RGMII timing

Связанные компоненты & термины

Microchip Technology KSZ9031RNXVA KSZ9031RNXVB-VAO KSZ9031RNXIC-TR KSZ9031RNXUA KSZ9031RNXUB Ethernet PHY Gigabit Ethernet transceiver Ethernet interface IC RGMII RGMII Version 2.0 10BASE-T 100BASE-TX 1000BASE-T LinkMD AEC-Q100 Grade 2 AEC-Q100 Grade 3 48-pin WQFN QFN-48 exposed pad automotive Ethernet cable diagnostics semiconductor
Быстрый запрос цены (RFQ)
Заполните все данные — наша команда продаж ответит в течение 24 часов
Артикул Производитель Корпус QTY Целевая цена Итого
✓
Запрос цены отправлен!

Мы ответим на ваш email в течение 24 часов

1
RFQ отправлен
2
Предложение получено
3
Заказ оформлен
4
Оплата
5
Отправлено
6
Доставлено
Просмотреть детали RFQ